John Deere Tractors 6020, 6020SE, 6120, 6120SE, 6220, 6220SE, 6320, 6320SE, 6420, 6420S, 6420SE, 6520, 6520SE, 6620, 6920, 6920S Diagnosis and Tests Service Technical Manual (TM4741)
Complete Operation & Tests Technical Manual with electrical wiring diagrams for John Deere 2WD or MFWD Tractors 6020, 6020SE, 6120, 6120SE, 6220, 6220SE, 6320, 6320SE, 6420, 6420S, 6420SE, 6520, 6520SE, 6620, 6820, 6920, 6920S (European Version) , with workshop information to maintain, diagnose, repair, and service like professional mechanics.
John Deere Tractors 6020, 6120, 6220, 6320, 6420, 6520, 6620, 6820, 6920 (S,SE) workshop Diagnosis & Tests technical manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.
For complete service information also see:
6020 to 6920S Tractors and SE Tractors Diagnostics - TM4726
6020 to 6620 Tractors and SE Tractors Repair - TM4750
6820, 6920 and 6920S Tractors Repair - TM4756
Front-Wheel Drive Axles (AS and MS Series) - CTM4687
Front-Wheel Drive Axles (700 Series) - CTM4820
POWERTECH Engines - CTM104
Mechanical Fuel Injection Systems - CTM207
Electronic Fuel Injection Systems (Level 4) - CTM170
Electronic Fuel Injection Systems (Level 1) - CTM284
Electronic Fuel Injection Systems (Level 11) - CTM220
Electronic Fuel Injection Systems (Level 12) - CTM331
Alternators and Starting Motors - CTM77
PRODUCT DETAILS:
Total Pages: 5,747 pages
File Format: PDF (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English
TM4741 English - John Deere 6020, 6120, 6220, 6320, 6420, 6420S, 6520, 6620, 6820, 6920, 6920S & SE Tractors Technical Manual (Operation and Tests).pdf
tm4741 - 6020 to 6920S Tractors - Operation and Test (European Version) Technical Manual.pdf
tm4641 German - Traktoren 6020 bis 6920S Operation and Tests
tm4742 French - Tracteurs 6020 à 6920S
tm4744 Italian - Funzionamento e prove trattori 6020 - 6920S Vol. 1/2: Sezioni da 210 a 240
tm4745 Dutch - Trekkers 6202 t/m 6920S Werking en controles
tm4748 Finnish - TEKNINEN KASIKIRJA Traktorit 6020 - 6920S ja SE-traktorit Toiminta ja testaukset Osa 1: Kappaleet 210 - 240-25C
tm4946 Russian - 6020 to 6920S Tractors SE Operation and Test
MAIN SECTIONS
Foreword
Version date
GENERAL INFORMATION
Safety Measures
General References
ENGINE
Operational Check-Out
Tests and Adjustments
FUEL, AIR INTAKE AND COOLING SYSTEMS
Tests and Adjustments
Theory of Operation
ELECTRICAL SYSTEM
Sub-System Diagnostics (Cab)
Sub-System Diagnostics (Open Operator's Station)
Sub-System Diagnostics (SE Tractors)
Component Tests
Functional Schematics (AutoPowr/IVT Transmission)
Functional Schematics (PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions)
Functional Schematics (Open Operator's Station)
Functional Schematics (SE Tractor)
Summary of Wiring Harnesses
Wiring Harnesses
Wiring Harnesses (Continued)
Wiring Harnesses from Serial Number 398656
Wiring Harnesses from Serial Number 398656 (Continued)
ELECTRONIC CONTROL UNITS
Operation and General Information on Diagnostics
Data BUS Systems, Operation
ATC - Automatic Temperature Control Unit
BCU - Basic Control Unit
BIF - Basic Informator
ECU - Engine Control Unit
EPC - Control Unit for PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions
JDL - Control Unit for JDLink
PLC - Park Lock Controller
PRF - Performance Monitor
SFA - Control Unit for Front-Wheel Drive Axle and Cab Suspension
SIC - Control Unit for Electrically Activated Selective Control Valves
SSU - Control Unit for AutoTrac
TCU - Control Unit for AutoPowr/IVT Transmission
TEC - Control Unit for Tractor Equipment Interface
UIC - User Interface Controller
UIM - User Interface Module, Keyboard for GreenStar Display 2100
SYNCROPLUS TRANSMISSION
Introductory Checks
Operational Check-Out
Tests and Adjustments
Theory of Operation
POWER REVERSER TRANSMISSION
Operational Check-Out
Tests and Adjustments
Theory of Operation
AUTOPOWR/IVT TRANSMISSION
Operational Check-Out
Tests and Adjustments
Theory of Operation
POWRQUAD, POWRQUAD PLUS, AUTOQUAD AND AUTOQUAD PLUS TRANSMISSIONS
Operational Check-Out
Tests and Adjustments
Theory of Operation
DRIVE SYSTEMS
Operational Check-Out
Tests and Adjustments
Theory of Operation
STEERING AND BRAKES
Introductory Checks
Operational Check-Out
Tests and Adjustments
Theory of Operation
HYDRAULIC SYSTEM
Operational Check-Out
Tests and Adjustments
Theory of Operation
MISCELLANEOUS
Operational Check-Out
Tests and Adjustments
Theory of Operation
OPERATOR'S CAB
Operational Check-Out
Tests and Adjustments
Theory of Operation
SPECIAL TOOLS
Special Tools (Dealer-Fabricated)
Special Tools and Test Equipment
tm4741 - 6020 to 6920S Tractors - Operation and Test (European Version)
Table of Contents
Foreword
Version date
Section 210: GENERAL INFORMATION
Group 05: Safety Measures
Recognize Safety Information
”Important” Information
”Note” Information
Prevent Machine Runaway
Handle Fluids Safely-Avoid Fires
Prevent Battery Explosions
Prepare for Emergencies
Prevent Acid Burns
Avoid High-Pressure Fluids
Service Cooling System Safely
Remove Paint Before Welding or Heating
Avoid Heating Near Pressurized Fluid Lines
Work In Ventilated Area
Wear Protective Clothing
Practice Safe Maintenance
Park Machine Safely
Use Proper Lifting Equipment
Construct Dealer-Made Tools Safely
Support Machine Properly
Work in Clean Area
Illuminate Work Area Safely
Service Machines Safely
Use Proper Tools
Service Tires Safely
Service Front-Wheel Drive Tractor Safely
Safety Information - Air Brake System
Avoid Eye Contact With Radar
Keep ROPS Installed Properly
Replace Safety Signs
Dispose of Waste Properly
Live With Safety
Safety Measures on Electronic Control Units
Group 15: General References
Reference 210-15-001, General References-Summary
Reference 210-15-010, Unified Inch Bolt and Cap Screw Torque Values
Reference 210-15-015, Metric Bolt and Cap Screw Torque Values
210-15-020, Hydraulic System Inch Fitting Torques
210-15-025, Hydraulic System Metric Fitting Torques
210-15-030, Component Identification Table
Reference 210-15-035, How to Read a Functional Schematic
210-15-040, How to Read a Diagnostic Schematic
210-15-042, Wire Numbers and Color Codes
210-15-045, Schematic, Wiring and Harness Symbols
Reference 210-15-046, Troubleshooting Unsolved Problems
210-15-050, Visual Check of the Electrical System
Reference 210-15-055, Electrical Circuit Malfunctions
Reference 210-15-060, Seven Step Electrical Test Procedure
210-15-065, Hydraulic System - Circuit Symbols
Section 220: ENGINE
Group 10: Operational Check-Out
Reference 220-10-010, Safety
220-10-020, Preliminary Engine Tests
Group 15: Tests and Adjustments
Reference 220-15-001, Tests and Adjustments-Summary of References
220-15-010, Dynamometer Test
Reference 220-15-020, Measuring PTO Power Output
Reference 220-15-030, Engine Tests with Service ADVISOR
Section 230: FUEL, AIR INTAKE AND COOLING SYSTEMS
Group 15: Tests and Adjustments
Reference 230-15-001, Tests and Adjustments - Summary of References
Reference 230-15-010, General Information
Reference 230-15-020, Explanation of Checks
Reference 230-15-030, Safety
Reference 230-15-040, Special Tools
Reference 230-15-050, Specifications
Reference 230-15-060, Testing the Air Intake System
Reference 230-15-070, Checking the Cooling System for Leaks
Reference 230-15-075, Flow-testing in the Low-Temperature Circuit (not for tractors with AutoPowr)
Reference 230-15-076, Flow-testing in the Low-Temperature Circuit (tractors with AutoPowr)
Reference 230-15-080, Testing the Temperature at which the Thermostat opens
Reference 230-15-090, Checking the Viscous Fan Drive
Reference 230-15-100, Checking the Fuel Transfer Pump
Reference 230-15-110, Hand Throttle Lever and Accelerator Pedal Adjustment
Reference 230-15-120, Accelerator Pedal Adjustment
Group 20: Theory of Operation
Reference 230-20-001, Component Description - Summary of References
Reference 230-20-010, Fuel System - Description
Reference 230-20-020, Air Intake System - Theory of Operation
Reference 230-20-030, Coolant Circuit - Description
Reference 230-20-040, Cooling System Radiator - Description
Reference 230-20-050, Intercooler - Description
Reference 230-20-060, Ring-Shaped (Transmission Oil) Cooler - Description
Reference 230-20-070, Viscous Fan Drive - Theory of Operation
Reference 230-20-072, Coolant Pumps in Low-Temperature Circuit (AutoPowr/IVT) - Operation
Reference 230-20-080, Automatic Drive Belt Tensioner - Theory of Operation
Reference 230-20-020, Cold Weather Starting Aids - Theory of Operation
Section 240: ELECTRICAL SYSTEM
Group 10: Sub-System Diagnostics (Cab)
Reference 240-10-001, Sub-System Diagnostics (Cab) - Summary of References
Reference 240-10-002, Special Tools
Reference 240-10-050, SE1 - Starting Motor and Charging Circuit
Reference 240-10-004, SE2 - Basic Informator (BIF)
Reference 240-10-005, SE3 - Horn
Reference 240-10-006, SE4 - Cigarette Lighter and Operator's Seat
Reference 240-10-007, SE6 - Lights
Reference 240-10-008, SE7 - Worklights
Reference 240-10-009, SE8 - Front Loader Plug
Reference 240-10-010, SE9 - Radio, Dome Light, Console Light and Access Step Light
Reference 240-10-011, SE10 - Fan, Air-Conditioning and ATC Automatic Air-Conditioning Control (ClimaTrak)
Reference 240-10-012, SE11 - Windshield Wiper and Washer
Reference 240-10-013, SE12 - Rear Window Wiper and Washer
Reference 240-10-014, SE13 - Beacon Light
Reference 240-10-015, SE14 - 3- and 7-Terminal Power Outlet Sockets
Reference 240-10-016, SE15 - Electronic Hitch Control (BCU)
Reference 240-10-017, SE16A - Basic Control Unit (BCU) (Rear PTO and External Control)
Reference 240-10-018, SE16B - Basic Control Unit (BCU) (Front PTO)
Reference 240-10-019, SE16C - Basic Control Unit (BCU) (Front-Wheel Drive)
Reference 240-10-020, SE16D - Basic Control Unit (BCU) (Differential Lock)
Reference 240-10-021, SE16E - Basic Control Unit (BCU) (Hazard Warning and Turn Signal Lights)
Reference 240-10-051, SE16F - Basic Control Unit (BCU) (Speed Sensor and Radar with PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions)
Reference 240-10-022, SE16F - Basic Control Unit (BCU) (Speed Sensor and Radar with AutoPowr/IVT Transmission)
Reference 240-10-023, SE16G - Basic Control Unit (BCU) (Headland Management System II)
Reference 240-10-024, SE16H - Basic Control Unit (BCU) (Power Supply, Acoustic Alarm)
Reference 240-10-025, SE16I - Basic Control Unit (BCU) (LTC Coolant Pump)
Reference 240-10-026, SE16J - Basic Control Unit (BCU) (Brake System and Handbrake Monitor Unit)
Reference 240-10-027, SE17 - Signal and Service Sockets
Reference 240-10-028, SE18 - Performance Monitor (PRF)
Reference 240-10-029, SE20 - Front-Wheel Drive Axle with TLS and Cab Suspension (SFA)
Reference 240-10-030, SE21 - Electronic Actuation of SCVs
Reference 240-10-031, SE21A - Stepper Motor Driver for Electronic Independent Control Valves (E-ICV)
Reference 240-10-032, SE21B - Stepper Motor Drivers for Electronic Selective Control Valves (E-SCV)
Reference 240-10-033, SE22 - CAN BUS Terminating Resistor
Reference 240-10-052, SE23A - Electronic Engine Control, Level 1 ECU (Stage I engines to 97/68/EC) and Level 12 ECU (Stage II engines to 97/68/EC)
Reference 240-10-034, SE23B - Electronic Engine Control, Level 4 ECU (Stage I engines to 97/68/EC) and Level 11 ECU (Stage II engines to 97/68/EC)
Reference 240-10-035, SE26 - Transmission Control Unit (TCU) (AutoPowr/IVT Transmission)
Reference 240-10-053, SE26A - Transmission Control (EPC) and Electrical Forward/Reverse Controls (PowrQuad Plus, AutoQuad and AutoQuad Plus transmissions)
Reference 240-10-036, SE27 - Transmission Shift (UIC) (AutoPowr/IVT Transmission)
Reference 240-10-037, SE28 - Electronic Park Lock (PLC) (AutoPowr/IVT Transmission)
Reference 240-10-040, SE29 - Electric Rear-View Mirrors
Reference 240-10-038, SE30 - JDLink Control Unit
Reference 240-10-039, SE31 - Heated Rear Window
Reference 240-10-041, SE32 - TEC Control Unit and 60-amp Socket (Implement BUS)
Reference 240-10-042, SE33 - GreenStar
Reference 240-10-045, SE35 - Automatic Steering System (SSU) (AutoTrac)
Reference 240-10-046, SE33 - GreenStar Display 2100
Reference 240-10-047, SE37 - Electro-Hydraulic Pick-up Hitch
Group 10A: Sub-System Diagnostics (Open Operator's Station)
Reference 240-10A-001, Sub-System Diagnostics (Open Operator's Station) - Summary of References
Reference 240-10-002, Special Tools
Reference 240-10A-003, SE1 - Starting Motor and Charging Circuit
Reference 240-10A-004, SE2 - Instrument Unit
Reference 240-10A-005, SE3 - Horn
Reference 240-10A-006, SE4 - Operator's Seat
Reference 240-10A-007, SE6 - Lights
Reference 240-10A-008, SE7 - Worklights
Reference 240-10A-009, SE14 - 3- and 7-Terminal Power Outlet Sockets
Reference 240-10A-010, SE15 - Electronic Hitch Control (BCU)
Reference 240-10A-011, SE16A - Basic Control Unit (BCU) (Rear PTO)
Reference 240-10A-012, SE16B - Basic Control Unit (BCU) (Front PTO)
Reference 240-10A-013, SE16C - Basic Control Unit (BCU) (Front-Wheel Drive)
Reference 240-10A-014, SE16D - Basic Control Unit (BCU) (Differential Lock)
Reference 240-10A-015, SE16E - Basic Control Unit (BCU) (Hazard Warning Light and Turn Signal Lights)
Reference 240-10A-016, SE16F - Basic Control Unit (BCU) (Speed Sending Units)
Reference 240-10A-017, SE16H - Basic Control Unit (BCU) (Power Supply, Acoustic Alarm and BUS Connection)
Reference 240-10A-018, SE16J - Basic Control Unit (BCU) (Brake System)
Reference 240-10A-019, SE17 - Signal Socket
Reference 240-10A-020, SE22 - CAN BUS Terminating Resistor
Reference 240-10A-021, SE23 - Electronic Engine Control (Level 12 ECU)
Group 10B: Sub-System Diagnostics (SE Tractors)
Reference 240-10B-001, Sub-System Diagnostics (SE Tractors) - Summary of References
Reference 240-10-002, Special Tools
Reference 240-10B-003, SE1 - Starting Motor and Charging Circuit
Reference 240-10B-004, SE2 - Instrument Unit
Reference 240-10B-005, SE3 - Horn
Reference 240-10B-006, SE4 - Operator's Seat
Reference 240-10B-007, SE6 - Lights
Reference 240-10B-008, SE7 - Worklights
Reference 240-10B-009, SE9 - Radio, Dome Light and Console Light
Reference 240-10B-010, SE10 - Fan and Air-Conditioning System
Reference 240-10B-011, SE11 - Windshield Wiper and Washer
Reference 240-10B-012, SE13 - Beacon Light
Reference 240-10B-013, SE14 - 3- and 7-Terminal Power Outlet Sockets
Reference 240-10B-014, SE15 - Electronic Hitch Control (BCU)
Reference 240-10B-015, SE16A - Basic Control Unit (BCU) (Rear PTO)
Reference 240-10B-016, SE16B - Basic Control Unit (BCU) (Front PTO)
Reference 240-10B-017, SE16C - Basic Control Unit (BCU) (Front-Wheel Drive)
Reference 240-10B-018, SE16D - Basic Control Unit (BCU) (Differential Lock)
Reference 240-10B-019, SE16E - Basic Control Unit (BCU) (Hazard Warning and Turn Signal Lights)
Reference 240-10B-020, SE16F - Basic Control Unit (BCU) (Speed Sending Units)
Reference 240-10B-021, SE16H - Basic Control Unit (BCU) (Power Supply, Acoustic Alarm and BUS Connection)
Reference 240-10B-022, SE16J - Basic Control Unit (BCU) (Brake System and Handbrake Monitor Unit)
Reference 240-10B-023, SE17 - Signal Socket
Reference 240-10B-024, SE22 - BUS Terminating Resistor
Reference 240-10B-025, SE23 - Electronic Engine Control (Level 12 ECU)
Group 15: Component Tests
Reference 240-15-101, Component Tests - Summary of References
Reference 240-15-001, SE01 - Starting Motor and Charging Circuit
Reference 240-15-002, SE02 - Basic Informator or Instrument Unit
Reference 240-15-003, SE03 - Horn
Reference 240-15-004, SE04 - Cigarette Lighter and Operator's Seat
Reference 240-15-005, SE06 - Lights
Reference 240-15-006, SE07 - Worklights
Reference 240-15-007, SE09 - Radio, Dome Light and Console Light
Reference 240-15-008, SE10 - Fan, Air-Conditioning and ATC Automatic Air-Conditioning Control (ClimaTrak)
Reference 240-15-009, SE11 and SE12 - Windshield Wiper and Washer
Reference 240-15-010, SE13 - Beacon Light
Reference 240-15-011, SE14 - 3- and 7-Terminal Power Outlet Sockets
Reference 240-15-012, SE15 - Electronic Hitch Control (BCU)
Reference 240-15-013, SE16A - Basic Control Unit (BCU) (Rear PTO and External Control)
Reference 240-15-014, SE16B - Basic Control Unit (BCU) (Front PTO)
Reference 240-15-015, SE16C - Basic Control Unit (BCU) (Front-Wheel Drive)
Reference 240-15-016, SE16D - Basic Control Unit (BCU) (Differential Lock)
Reference 240-15-017, SE16E - Basic Control Unit (BCU) (Hazard Flasher and Turn Signal Unit)
Reference 240-15-018, SE16G - Basic Control Unit (BCU) (Headland Management System)
Reference 240-15-019, SE16H - Basic Control Unit (BCU) (Power Supply, Acoustic Alarm)
Reference 240-15-020, SE16I - Basic Control Unit (BCU) (LTC Coolant Pump)
Reference 240-15-021, SE16J - Basic Control Unit (BCU) (Brake System and Handbrake Monitor Unit)
Reference 240-15-022, SE20 - Front-Wheel Drive Axle with TLS and Cab Suspension (SFA)
Reference 240-15-023, SE21 - E-ICV / E-SCV Controller (SIC)
Reference 240-15-024, SE22 - CAN BUS Terminating Resistor
Reference 240-15-025, SE23 - Electronic Engine Control (ECU)
Reference 240-15-026, SE26A - Transmission Control (EPC) and Electrical Forward/Reverse Controls (PowrQuad Plus, AutoQuad and AutoQuad Plus transmissions)
Reference 240-15-028, SE27 - User Interface Controller (UIC) (AutoPowr/IVT Transmission)
Reference 240-15-029, SE28 - Electronic Park Lock (PLC) (AutoPowr/IVT Transmission)
Reference 240-15-030, SE29 - Electric Rear-View Mirrors
Reference 240-15-031, SE31 - Heated Rear Window
Reference 240-15-032, SE32 - Control Unit TEC and 60-amp Socket (Implement BUS)
Group 25: Functional Schematics (AutoPowr/IVT Transmission)
Reference 240-25-001, Functional Schematics and Fuses (AutoPowr/IVT Transmission) - Summary of References
Reference 240-25-002, Fuses and Relays (AutoPowr/IVT transmission) up to Serial No. 398655
Reference 240-25-007, Fuses and Relays (AutoPowr/IVT transmission) from Serial No. 398656
Reference 240-25-003, Designation of Parts Shown in Functional Schematic and Harness Diagram
Reference 240-25-004, Designation of Sections Shown in Functional Schematic
Reference 240-25-005, Wiring Harness Designations
Reference 240-25-006, Functional Schematic (Complete Tractor) (AutoPowr/IVT transmission)
Group 25A: Functional Schematics (PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions)
Reference 240-25A-001, Functional Schematics and Wiring Harnesses (PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions ) - Summary of References
Reference 240-25A-010, Fuses and Relays up to Serial No. 398655
Reference 240-25A-015, Fuses and Relays from Serial No. 398656
Reference 240-25-003, Designation of Parts Shown in Functional Schematic and Harness Diagram
Reference 240-25-004, Designation of Sections Shown in Functional Schematic
Reference 240-25-005, Wiring Harness Designations
Reference 240-25A-014, Functional Schematic (Complete Tractor)
Group 25B: Functional Schematics (Open Operator's Station)
Reference 240-25B-001, Functional Schematics and Wiring Harnesses (Open Operator's Station) - Summary of References
Reference 240-25B-002, Fuses and Relays (Open Operator's Station)
Reference 240-25B-003, Designation of Parts Shown in Functional Schematic and Harness Diagram
Reference 240-25B-004, Designation of Sections Shown in Functional Schematic
Reference 240-25B-005, Wiring Harness Designations
Reference 240-25B-006, Functional Schematic (Complete Tractor) (Open Operator's Station)
Group 25C: Functional Schematics (SE Tractor)
Reference 240-25C-001, Functional Schematic and Wiring Harnesses (SE Tractor) - Summary of References
Reference 240-25C-010, Fuses and Relays (SE Tractor)
Reference 240-25C-011, Designation of Parts Shown in Functional Schematic and Harness Diagram
Reference 240-25C-012, Designation of Sections Shown in Functional Schematic
Reference 240-25C-013, Wiring Harness Designations
Reference 240-25C-014, Functional Schematic (Complete Tractor) (SE Tractor)
Group 26: Summary of Wiring Harnesses
Reference 240-26-004, Wiring Harnesses for 6120, 6220, 6320, 6420 and 6520 Tractors with PowrQuad Plus Transmission and Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-005, Wiring Harnesses for 6320, 6420 and 6520 Tractors with AutoQuad Transmission and Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-002, Wiring Harnesses for 6420S, 6620, 6820, 6920 and 6920S Tractors with PowrQuad Plus or AutoQuad Transmissions and Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-501, Wiring Harnesses for Tractors with PowrQuad Plus or AutoQuad Transmissions and Stage II Engine to 97/68/EC - Summary of References
Reference 240-26-701, Wiring Harnesses for 6120 and 6220 Tractors from Serial No. 398656 - Summary of References
Reference 240-26-702, Wiring Harnesses for 6320, 6420, 6420S, 6520, 6620, 6820, 6920 and 6920S Tractors with PowrQuad Plus or AutoQuad Plus Transmission from Serial No. 398656 - Summary of References
Reference 240-26-003, Wiring Harnesses for Tractors with AutoPowr/IVT Transmission and Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-502, Wiring Harnesses for Tractors with AutoPowr/IVT Transmission and Stage II Engine to 97/68/EC - Summary of References
Reference 240-26-703, Wiring Harnesses for Tractors with AutoPowr/IVT Transmission from Serial No. 398656 - Summary of References
Reference 240-26-006, Wiring Harnesses for Tractors with Open Operator's Station and Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-201, Wiring Harnesses for Tractors with Open Operator's Station from Tractor Serial No. 399888 and Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-503, Wiring Harnesses for Tractors with Open Operator's Station and Stage II Engine to 97/68/EC - Summary of References
Reference 240-26-704, Wiring Harnesses for Tractors with Open Operator's Station from Tractor Serial No. 399888 and Stage II Engine to 97/68/EC - Summary of References
Reference 240-26-007, Wiring Harnesses for SE Tractors with Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-202, Wiring Harnesses for SE Tractors from Serial No. 391068 with Stage I Engine to 97/68/EC - Summary of References
Reference 240-26-504, Wiring Harnesses for SE Tractors with Stage II Engine to 97/68/EC - Summary of References
Reference 240-26-705, Wiring Harnesses for SE Tractors from Serial No. 391068 with Stage II Engine to 97/68/EC - Summary of References
Group 26A1: Wiring Harnesses
Reference 240-26-011, W01 - Wiring Harness - Power Supply
Reference 240-26-013, W01 - Wiring Harness - Power Supply (Open Operator's Station)
Reference 240-26-015, W01 - Wiring Harness - Power Supply (SE Tractors)
Reference 240-26-021, W02 - Engine Wiring Harness for Stage I Engine to 97/68/EC (without Engine Control or with Level 1 ECU)
Reference 240-26-023, W02 - Engine Wiring Harness for Stage I Engines to 97/68/EC (Level 4 ECU)
Reference 240-26-521, W02 - Engine Wiring Harness for Stage II Engines to 97/68/EC (Level 11 ECU)
Reference 240-26-025, W02 - Engine Wiring Harness for Stage I Engines to 97/68/EC (Open Operator's Station)
Reference 240-26-524, W02 - Engine Wiring Harness for Stage II Engines to 97/68/EC (Level 12 ECU) (Open Operator's Station)
Reference 240-26-027, W02 - Engine Wiring Harness for Stage I Engines to 97/68/EC (SE Tractors)
Reference 240-26-526, W02 - Engine Wiring Harness for Stage II Engines to 97/68/EC (Level 12 ECU) (SE Tractors)
Reference 240-26-031, W03 - Wiring Harness - Starting Aid for Stage I and II Engines to 97/68/EC (without Engine Control or with Level 1 or 12 ECUs)
Reference 240-26-032, W03 - Wiring Harness - Starting Aid for Stage I and II Engines to 97/68/EC (Level 4 or 11 ECUs)
Reference 240-26-033, W03 - Wiring Harness - Starting Aid for Stage I and II Engines to 97/68/EC (Level 4 or 11 ECUs) (AutoPowr/IVT transmission)
Reference 240-26-042, W04 - Wiring Harness - Headlights
Reference 240-26-061, W06 - Wiring Harness - Front-Wheel Drive Axle with TLS
Reference 240-26-071, W07 - Wiring Harness - Front PTO
Reference 240-26-081, W08 - Wiring Harness - Cab, with Stage I Engine to 97/68/EC
Continued
Reference 240-26-581, W08 - Wiring Harness - Cab, with Stage II Engine to 97/68/EC
Reference 240-26-082, W08 - Wiring Harness - Cab, with Stage I Engine to 97/68/EC (AutoPowr/IVT transmission)
Reference 240-26-582, W08 - Wiring Harness - Cab, with Stage II Engine to 97/68/EC (AutoPowr/IVT transmission)
Reference 240-26-083, W08 - Wiring Harness - Open Operator's Station, with Stage I Engine to 97/68/EC
Reference 240-26-583, W08 - Wiring Harness - Open Operator's Station, with Stage II Engine to 97/68/EC
Reference 240-26-084, W08 - Wiring Harness - Cab, with Stage I Engine to 97/68/EC (SE Tractors)
Reference 240-26-584, W08 - Wiring Harness - Cab, with Stage II Engine to 97/68/EC (SE Tractors)
Reference 240-26-091, W09 - Wiring Harness - Cowl, with Stage I Engine to 97/68/EC
Reference 240-26-591, W09 - Wiring Harness - Cowl, with Stage II Engine to 97/68/EC
Reference 240-26-092, W09 - Wiring Harness - Cowl, with Stage I Engine to 97/68/EC (AutoPowr/IVT transmission)
Reference 240-26-592, W09 - Wiring Harness - Cowl, with Stage II Engine to 97/68/EC (AutoPowr/IVT transmission)
Reference 240-26-094, W09 - Wiring Harness - Cowl, with Stage I Engine to 97/68/EC (Open Operator's Station)
Reference 240-26-593, W09 - Wiring Harness - Cowl, with Stage II Engine to 97/68/EC (Open Operator's Station)
Reference 240-26-095, W09 - Wiring Harness - Cowl, with Stage I Engine to 97/68/EC (SE Tractors)
Reference 240-26-594, W09 - Wiring Harness - Cowl, with Stage II Engine to 97/68/EC (SE Tractors)
Reference 240-26-101, W10 - Wiring Harness - Shift Console
Reference 240-26-111, W11 - Wiring Harness - Transmission Shift and Hand Throttle
Reference 240-26-112, W11 - Wiring Harness - Speed Control Lever and Hand Throttle (AutoPowr/IVT Transmission)
Reference 240-26-122, W12 - Wiring Harness - Command Arm (AutoPowr/IVT Transmission)
Reference 240-26-131, W13 - Wiring Harness - Clutch Sender
Reference 240-26-144, W14 - Wiring Harness - 3-Terminal Power Outlet Socket
Reference 240-26-141, W14 - Wiring Harness - 3-Terminal Power Outlet Socket (Open Operator's Station and SE Tractor)
Group 26A2: Wiring Harnesses (Continued)
Reference 240-26-153, W15 - ECU Wiring Harness for Stage I Engines to 97/68/EC (without Engine Control)
Reference 240-26-151, W15 - ECU Wiring Harness for Stage I Engines to 97/68/EC (Level 1 ECU)
Reference 240-26-152, W15 - ECU Wiring Harness for Stage I Engines to 97/68/EC (Level 4 ECU)
Reference 240-26-651, W15 - ECU Wiring Harness for Stage II Engines to 97/68/EC (Level 11 ECU)
Reference 240-26-161, W16 - SIC Wiring Harness for Stage I Engines to 97/68/EC
Reference 240-26-561, W16 - SIC Wiring Harness for Stage II Engines to 97/68/EC
Reference 240-26-171, W17 - Wiring Harness - Multifunction Unit
Reference 240-26-181, W18 - Wiring Harness - Windshield Wiper Switch (without Intermittent Wipe)
Reference 240-26-182, W18 - Wiring Harness - Windshield Wiper Switch (with Intermittent Wipe)
Reference 240-26-191, W19 - Wiring Harness - Cab Roof, with Stage I Engines to 97/68/EC
Reference 240-26-691, W19 - Wiring Harness - Cab Roof, with Stage II Engines to 97/68/EC
Reference 240-26-193, W19 - Cab Roof Wiring Harness (SE Tractors)
Reference 240-26-201, W20 - Wiring Harness - Turn Signal and Clearance Lights
Reference 240-26-211, W21 - Wiring Harness - Worklights on Front of Cab Roof
Reference 240-26-221, W22 - Wiring Harness - Worklights on Rear of Cab Roof
Reference 240-26-222, W22 - Wiring Harness - Xenon Worklights on Rear of Cab Roof
Reference 240-26-231, W23 - Wiring Harness - Windshield Wiper (Without Switch for Windshield)
Reference 240-26-232, W23 - Wiring Harness - Windshield Wiper (With Switch for Windshield)
Reference 240-26-241, W24 - Wiring Harness - Rear Window Wiper
Reference 240-26-251, W25 - Wiring Harness - Rear Window Wiper Switch
Reference 240-26-261, W26 - Wiring Harness - Fan and Air Conditioner
Reference 240-26-263, W26 - Wiring Harness - Fan and Air Conditioner (SE Tractors)
Reference 240-26-281, W28 - Wiring Harness - Front End of Transmission
Reference 240-26-285, W28 - Wiring Harness - Front Part of Transmission (AutoPowr/IVT Transmission)
Reference 240-26-284, W28 - Wiring Harness - Front End of Transmission (Open Operator's Station)
Reference 240-26-288, W28 - Wiring Harness - Front Part of Transmission (SE Tractors)
Reference 240-26-291, W29 - Wiring Harness - Valve Block (AutoPowr/IVT Transmission)
Reference 240-26-303, W30 - Wiring Harness - Rear Part of Transmission (6120-6620 Tractors)
Reference 240-26-304, W30 - Wiring Harness - Rear Part of Transmission (6820-6920 Tractors)
Reference 240-26-306, W30 - Wiring Harness - Rear End of Transmission (Open Operator's Station)
Reference 240-26-307, W30 - Wiring Harness - Rear Part of Transmission (SE Tractors)
Reference 240-26-311, W31 - Wiring Harness - 7-Terminal Power Outlet Socket
Reference 240-26-321, W32 - Wiring Harness - Stepper Motors, with Stage I Engines to 9/68/EC
Reference 240-26-821, W32 - Wiring Harness - Stepper Motors, with Stage II Engines to 97/68/EC
Reference 240-26-331, W33 - Wiring Harness - Service
Reference 240-26-341, W34 - Wiring Harness - Electric Rear-View Mirrors
Reference 240-26-351, W35 - Wiring Harness - Access-Step Light and Battery Cut-Off Switch (Version 1)
Reference 240-26-361, W36 - Wiring Harness - GreenStar (60-amp Implement Socket), with Stage I Engines to 97/68/EC
Reference 240-26-362, W36 - Wiring Harness - GreenStar (60-amp Implement Socket), with Stage II Engines to 97/68/EC
Reference 240-26-371, W37 - Wiring Harness - GreenStar (Connection), with Stage I Engines to 97/68/EC
Reference 240-26-391, W39 - Wiring Harness - GreenStar (Cab), with Stage I Engines to 97/68/EC
Reference 240-26-393, W39 - Wiring Harness - GreenStar (Cab), with Stage II Engines to 97/68/EC
Reference 240-26-401, W40 - Wiring Harness - GreenStar (Cab Roof), with Stage I Engines to 97/68/EC
Reference 240-26-402, W40 - Wiring Harness - GreenStar (Cab Roof), with Stage II Engines to 97/68/EC
Reference 240-26-411, W41 - Wiring Harness - JDLink
Reference 240-26-421, W42 - Wiring Harness - Battery Cut-Off Switch (Version 1)
Reference 240-26-591, W59 - Wiring Harness - Adapter for Lights on Cab Frame (SE Tractors)
Group 26B1: Wiring Harnesses from Serial Number 398656
W02 - Engine Wiring Harness (Level 11 ECU) from Serial No. 398656
W02 - G02
W02 - M01
W02 - X02
W02 - X66/1
W02 - X66/2
W02 - X70
W02 - X79
W02 - X130
W02 - X205
W02 - X261
W02 - X301
W02 - X305
W02 - X356
W02 - X358
W02 - X359
W02 - X411
W02 - X450
W02 - X451
W02 - X547
W02 - X550
W02 - X566
W02 - X567
W02 - X568
W02 - X575
W02 - X604
W02 - X610
W02 - X625
W02 - XGND9
W02/1 - Engine Wiring Harness (Level 12 ECU) from Serial No. 398656
W02/1 - G02
W02/1 - M01
W02/1 - X02
W02/1 - X66/1
W02/1 - X66/2
W02/1 - X70
W02/1 - X78
W02/1 - X79
W02/1 - X130
W02/1 - X205
W02/1 - X214
W02/1 - X301
W02/1 - X305
W02/1 - X353
W02/1 - X356
W02/1 - X411
W02/1 - X450
W02/1 - X547
W02/1 - X550
W02/1 - X567
W02/1 - X575
W02/1 - X604
W02/1 - XGND9
W03 - Starting Aid Wiring Harness (Level 11 ECU) from Serial No. 398656
W03 - F09
W03 - F11
W03 - G02
W03 - K01
W03 - K36
W03 - X547
W03 - X630
W03/1 - Starting Aid Wiring Harness (Level 11 ECU) with AutoPowr/IVT Transmission, from Serial No. 398656
W03/1 - F09
W03/1 - F11
W03/1 - F22
W03/1 - G02
W03/1 - K01
W03/1 - K36
W03/1 - X528
W03/1 - X547
W03/1 - X630
W03/2 - Starting Aid Wiring Harness (Level 12 ECU) from Serial No. 398656
W03/2 - D31
W03/2 - F09
W03/2 - F11
W03/2 - G02
W03/2 - K01
W03/2 - K36
W03/2 - R15
W03/2 - X547
W08 - Wiring Harness - Cab from Serial No. 398656
W08 - F03
W08 - F04
W08 - F05
W08 - F06
W08 - F07
W08 - K01
W08 - K02
W08 - K08
W08 - K09
W08-K10
W08 - X14/1
W08 - X14/2
W08 - X34
W08 - X35
W08 - X37
W08 - X37/3
W08 - X40
W08 - X44
W08 - X106
W08 - X107
W08 - X113/1
W08 - X113/2
W08 - X122
W08 - X125
W08 - X127
W08 - X128
W08 - X132
W08 - X171/1F
W08 - X171/1M
W08 - X171/2F
W08 - X171/2M
W08 - X174
W08 - X230
W08 - X235
W08 - X236
W08 - X239
W08 - X242
W08 - X243
W08 - X245
W08 - X247
W08 - X248
W08 - X260
W08 - X285
W08 - X371
W08 - X400
W08 - X403
W08 - X404
W08 - X409
W08 - X409/2
W08 - X423
W08 - X430
W08 - X440
W08 - X450
W08 - X460/1
W08 - X471
W08 - X472/1
W08 - X472/2
W08 - X473
W08 - X483/1
W08 - X483/2
W08 - X485
W08 - X488
W08 - X500
W08 - X503
W08 - X522
W08 - X544
W08 - X545
W08 - X571
W08 - X577
W08 - X577/1
W08 - X623
W08 - X651
W08 - X653
W08 - X657
W08 - X660
W08 - X690
W08 - XGND1
W08 - XGND4
W08 - XGND5
W08 - XGND6
W08 - XGND43
W08 - XGND44
W08 - XGND45
W08 - XGND47
W08 - XGND48
W08 - XGND49
W08 - XGND50
W08 - XGND52
W08/1 - Cab Wiring Harness (with AutoPowr/IVT Transmission), from Serial No. 398656
W08/1 - F03
W08/1 - F04
W08/1 - F05
W08/1 - F06
W08/1 - F07
W08/1 - K01
W08/1 - K02
W08/1 - K08
W08/1 - K09
W08/1 - K10
W08/1 - R18
W08/1 - X34
W08/1 - X35
W08/1 - X37
W08/1 - X37/3
W08/1 - X40
W08/1 - X44
W08/1 - X106
W08/1 - X107
W08/1 - X113/1
W08/1 - X113/2
W08/1 - X122
W08/1 - X128
W08/1 - X132
W08/1 - X133
W08/1 - X171/1F
W08/1 - X171/1M
W08/1 - X171/2F
W08/1 - X171/2M
W08/1 - X174
W08/1 - X230
W08/1 - X235
W08/1 - X236
W08/1 - X239
W08/1 - X242
W08/1 - X243
W08/1 - X245
W08/1 - X247
W08/1 - X248
W08/1 - X260
W08/1 - X285
W08/1 - X332
W08/1 - X367
W08/1 - X371
W08/1 - X382
W08/1 - X400
W08/1 - X403
W08/1 - X404
W08/1 - X409
W08/1 - X422
W08/1 - X423
W08/1 - X430
W08/1 - X440
W08/1 - X450
W08/1 - X472/1
W08/1 - X472/2
W08/1 - X473
W08/1 - X481
W08/1 - X482
W08/1 - X483/1
W08/1 - X483/2
W08/1 - X484
W08/1 - X485
W08/1 - X488
W08/1 - X522
W08/1 - X544
W08/1 - X545
W08/1 - X571
W08/1 - X577
W08/1 - X577/1
W08/1 - X623
W08/1 - X690
W08/1 - XGND1
W08/1 - XGND4
W08/1 - XGND5
W08/1 - XGND6
W08/1 - XGND43
W08/1 - XGND44
W08/1 - XGND45
W08/1 - XGND47
W08/1 - XGND48
W08/1 - XGND49
W08/1 - XGND50
W08/1 - XGND52
W08/2 - Wiring Harness - Open Operator's Station from Serial No. 399888
W08/2 - F101 - F120
W08/2 - F21/1 - F21/3
W08/2 - K101 - K113
W08/2 - X2
W08/2 - X14/1
W08/2 - X14/2
W08/2 - X35
W08/2 - X37
W08/2 - X58
W08/2 - X86
W08/2 - X92
W08/2 - X96
W08/2 - X106
W08/2 - X107
W08/2 - X108
W08/2 - X109
W08/2 - X112/1
W08/2 - X112/2
W08/2 - X113
W08/2 - X122
W08/2 - X125
W08/2 - X127
W08/2 - X160
W08/2 - X161
W08/2 - X188
W08/2 - X230
W08/2 - X234
W08/2 - X236
W08/2 - X238
W08/2 - X239
W08/2 - X245
W08/2 - X269F
W08/2 - X269M
W08/2 - X286
W08/2 - X287
W08/2 - X288
W08/2 - X289
W08/2 - X311
W08/2 - X315
W08/2 - X317/1
W08/2 - X317/2
W08/2 - X321
W08/2 - X324
W08/2 - X406/1F
W08/2 - X406/1M
W08/2 - X473
W08/2 - X504
W08/2 - X505
W08/2 - X570/1
W08/2 - X571
W08/2 - X582
W08/2 - X587F
W08/2 - X587M
W08/2 - X588
W08/2 - X614
W08/2 - X615
W08/2 - X616/1
W08/2 - X616/2
W08/2 - X616/3
W08/2 - XGND1
W08/2 - GND1/1
W08/2 - XGND2
W08/2 - XGND2/1
W08/2 - XGND5
W08/2 - XGND5/1
W08/3 - Wiring Harness - Cab (SE Tractors) from Serial No. 391068
W08/3 - F101 - F120
W08/3 - F021/1 - F021/3
W08/3 - F023/1 - F023/3
W08/3 - F025/1 - F025/3
W08/3 - K101 - K113
W08/3 - M5
W08/3 - S17
W08/3 - X14/1
W08/3 - X14/2
W08/3 - X28
W08/3 - X35
W08/3 - X37
W08/3 - X58
W08/3 - X106
W08/3 - X107
W08/3 - X112/1A
W08/3 - X112/1B
W08/3 - X112/2A
W08/3 - X112/2B
W08/3 - X113/1
W08/3 - X113/2
W08/3 - X120/1
W08/3 - X120/2
W08/3 - X122
W08/3 - X125
W08/3 - X127
W08/3 - X158
W08/3 - X182
W08/3 - X188
W08/3 - X230
W08/3 - X236
W08/3 - X238
W08/3 - X239
W08/3 - X245
W08/3 - X269F
W08/3 - X269M
W08/3 - X311
W08/3 - X315
W08/3 - X321
W08/3 - X324
W08/3 - X400
W08/3 - X406/1F
W08/3 - X406/1M
W08/3 - X430
W08/3 - X431
W08/3 - X450
W08/3 - X473
W08/3 - X504
W08/3 - X505
W08/3 - X515
W08/3 - X544
W08/3 - X560F
W08/3 - X560M
W08/3 - X570/1
W08/3 - X571
W08/3 - X587F
W08/3 - X587M
W08/3 - X588
W08/3 - X613
W08/3 - X614
W08/3 - X615
W08/3 - X616/1
W08/3 - X616/2
W08/3 - X616/3
W08/3 - XGND1
W08/3 - XGND1/1
W08/3 - XGND2
W08/3 - XGND2/1
W08/3 - XGND5
W08/3 - XGND5/1
W09 - Wiring Harness - Cowl, from Serial No. 398656
W09 - S01
W09 - S09
W09 - X20A
W09 - X20B
W09 - X25
W09 - X26
W09 - X120/1
W09 - X120/2
W09 - X126
W09 - X238
W09 - X322
W09 - X324
W09 - X403
W09 - X404
W09 - X487
W09 - X615
W09 - X654
W09 - XGND40
W09/1 - Cowl Wiring Harness (with AutoPowr/IVT Transmission), from Serial No. 398656
W09/1 - S01
W09/1 - S09
W09/1 - X20A
W09/1 - X20B
W09/1 - X25
W09/1 - X26
W09/1 - X120/1
W09/1 - X120/2
W09/1 - X126
W09/1 - X322
W09/1 - X323
W09/1 - X324
W09/1 - X343
W09/1 - X403
W09/1 - X404
W09/1 - X487
W09/1 - X615
W09/1 - XGND40
Group 26B2: Wiring Harnesses from Serial Number 398656 (Continued)
W15 - Wiring Harness - Engine Control Unit ECU (ECU Level 11) from Serial No. 398656
W15 - X409
W15 - X451
W15 - X570/1
W15 - X570/2
W15 - X610
W15/1 - Wiring Harness - Engine Control Unit ECU (Level 12) from Serial No. 398656
W15/1 - X409
W15/1 - X409/2
W15/1 - X570
W26 - Wiring Harness - Fan and Air-Conditioning System from Serial No. 398656
W26 - X28
W26 - X46
W26 - X47
W26 - X48
W26 - X73/1
W26 - X73/2
W26 - X100
W26 - X448
W26 - X449/1
W26 - X449/2
W26 - X577
W26 - X665
W26 - XGND15
W26/1 - Wiring Harness-ClimaTrak (Cab)
W26/1 - X577
W26/1 - X577/1
W26/1 - X595
W26/1 - X599
W26/1 - X600
W26/1 - X602
W26/1 - X655
W26/1 - X664
W26/1 - XGND15
W35 - Wiring Harness - Access-Step Light and Battery Cut-Off Switch (Version 2)
W35 - X544
W35 - X606/1
W35 - X606/2
W35 - X696
W35 - X697
W39/1 - Wiring Harness - GreenStar with TEC 1 (Cab)
W39/1 - K55
W39/1 - X522
W39/1 - X535
W39/1 - X543
W39/1-X571
W39/1 - X572
W39/1 - X591F
W39/1 - X591M
W39/1 - X615F/2
W39/1 - X615M/1
W39/1 - X636
W39/1 - X641
W39/1 - X656
W39/1 - X659
W39/1 - X689
W39/1 - X690
W39/2 - Wiring Harness - GreenStar without or with TEC 3 (Cab) from Serial No. 446540
W39/2 - K51
W39/2 - K55
W39/2 - X522
W39/2 - X535
W39/2 - X543
W39/2-X571
W39/2 - X591F
W39/2 - X591M
W39/2 - X615F/2
W39/2 - X615M/1
W39/2 - X636
W39/2 - X641
W39/2 - X656
W39/2 - X659
W39/2 - X689
W39/2 - X690
W39/2 - X707
W39/2 - X711F
W39/2 - X711M
W40 - Wiring Harness-GreenStar (Cab Roof)
W40 - X535
W40 - X536
W40 - X565
W40 - X730
W40 - X731
W42 - Wiring Harness - Battery Cut-Off Switch (Version 2)
W42 - K56
W42 - K57
W42 - X86
W42 - X86/1
W42 - X697
W42 - XGND56
W47 - Wiring Harness-ClimaTrak (Cab Roof)
W47 - X594
W47 - X595
W47 - X597
W47 - X614F/1
W47 - X614M/1
W47 - X652
W48 - Wiring Harness-ClimaTrak (Cowl)
W48 - X599
W48 - X601
W48 - X605
W49 - Wiring Harness-ClimaTrak (Evaporator Housing)
W49 - X46
W49 - X47
W49 - X598
W49 - X603
W49 - X664
W49 - X665
W50 - GreenStar Harness (CAN BUS Terminator)
W50 - X543
W50 - X658
W50/1 - GreenStar Harness (CAN BUS Terminator)
W50/1 - X535
W50/1 - X536
W51 - Wiring Harness - AutoTrac (Cab)
W51 - X615F/2
W51 - X615M/2
W51 - X631/1
W51 - X631/2
W51 - X631/3
W51 - X632/1
W51 - X632/2
W51 - X635
W51 - X637
W51 - X641
W52 - AutoTrac Harness (Wheel Angle Sensor)
W52 - X633
W52 - X637
W53 - AutoTrac Harness (Command Arm)
W53 - X636
W53 - X636/1
W55 - Display Wiring Harness
W55 - X656
W55 - X692
W55 - X693
W55 - X698
W56 - Wiring Harness for Serial Interface, Adapter
W56 - X698
W56 - X699
W56 - X712
W57 - Wiring Harness for Electro-Hydraulic Pick-Up Hitch (Cab)
W57 - X37F
W57 - X37M
W57 - X644
W57 - X645
W58 - Wiring Harness for Electro-Hydraulic Pick-Up Hitch (Valves)
W58 - X642
W58 - X643
W58 - X644
W60 - GreenStar Harness (Display)
W60 - X538
W60 - X539
W60 - X730
W60 - X731
Section 245: ELECTRONIC CONTROL UNITS
Group 05: Operation and General Information on Diagnostics
Special Tools
Reference 245-05-001, General Operation and Entering the Program Mode
Reference 245-05-002, Accessing the Addresses and Diagnostic Trouble Codes
Reference 245-05-009, Adjusting the Instrument Unit on Tractors with Open Operator's Station and SE Tractors
Reference 245-05-005, Driving in the Diagnostic Mode
Reference 245-05-004, Electronic Control Units - Summary of Addresses
Reference 245-05-010, ATC - Automatic Temperature Control Unit (ClimaTrak) - Summary of Addresses
Reference 245-05-011, BCU - Basic Control Unit - Summary of Addresses
Reference 245-05-012, BIF - Basic Informator - Summary of Addresses
Reference 245-05-013, ECU (Level 1; Stage I engine to 97/68/EC) - Engine Control Unit - Summary of Addresses
Reference 245-05-014, ECU (Level 4; Stage I engine to 97/68/EC) - Engine Control Unit - Summary of Addresses
Reference 245-05-015, ECU (Level 11; Stage II engine to 97/68/EC) - Engine Control Unit - Summary of Addresses
Reference 245-05-016, ECU (Level 12; Stage II engine to 97/68/EC) - Engine Control Unit - Summary of Addresses
Reference 245-05-017, EPC - Controller for PowrQuad Plus and AutoQuad Transmissions (up to Tractor Ser. No. 398655; up to Software Version Number 14) - Summary of Addresses
Reference 245-05-018, EPC - Controller for PowrQuad Plus and AutoQuad Transmissions (from Tractor Ser. No. 398656; Software Version Number 1305) - Summary of Addresses
Reference 245-05-019, JDL - JDLink Control Unit - Summary of Addresses
Reference 245-05-020, PLC - Park Lock Controller - Summary of Addresses
Reference 245-05-021, PRF - Performance Monitor - Summary of Addresses
Reference 245-05-022, SFA - Control Unit for Front-Wheel Drive Axle with TLS and Cab Suspension - Summary of Addresses
Reference 245-05-023, SIC - E-SCV / E-ICV Control Unit - Summary of Addresses
Reference 245-05-024, SSU - Control unit for AutoTrac - Summary of Addresses
Reference 245-05-025, TCU - Control Unit for AutoPowr/IVT Transmission - Summary of Addresses
Reference 245-05-026, TEC 1 - Tractor Equipment interface Controller up to Serial No. 446539 - Summary of Addresses
Reference 245-05-027, TEC 3 - Tractor Equipment interface Controller from Serial No. 446540 to Serial No. XXXXXX - Summary of Addresses
Reference 245-05-028, TEC 4 - Tractor Equipment interface Controller from Serial No. XXXXXX - Summary of Addresses
Reference 245-05-029, UIC - User Interface Controller - Summary of Addresses
Reference 245-05-030, UIM - Control unit for Keyboard of GreenStar Display - Summary of Addresses
Reference 245-05-006, Approved Software for Control Units
Reference 245-05-007, Electronic Control Units - Location and Allocation
Reference 245-05-008, ECU Types and their Associated Injection Pumps
Group 20: Data BUS Systems, Operation
Reference 245-20-001, Data BUS Systems - Summary of References
Reference 245-20-002, Data-BUS Systems
Reference 245-20-003, Operation of the CAN BUS System
Reference 245-20-011, CAN BUS Systems on Tractors with Stage I Engine to 97/68/EC without Engine Control Unit (ECU)
Reference 245-20-012, CAN BUS Systems on Tractors with Stage I Engine to 97/68/EC and Engine Control Unit (ECU), Level 1
Reference 245-20-013, CAN BUS Systems on Tractors with Stage I Engine to 97/68/EC and Engine Control Unit (ECU), Level 4
Reference 245-20-014, CAN BUS Systems on Tractors with Stage I Engine to 97/68/EC and AutoPowr/IVT transmission
Reference 245-20-021, CAN BUS Systems on Tractors with Stage II Engine to 97/68/EC and Engine Control Unit (ECU), Level 11
Reference 245-20-031, CAN BUS Systems on Tractors from Serial No. 398656 with Engine Control Unit (ECU), Level 11
Reference 245-20-032, CAN BUS Systems on Tractors from Serial No. 398656 with Engine Control Unit (ECU), Level 12
Reference 245-20-022, CAN BUS Systems on Tractors with Stage II Engine to 97/68/EC and Engine Control Unit (ECU), Level 11 (AutoPowr/IVT Transmission)
Reference 245-20-101, CAN BUS Systems on Tractors with Stage I Engine to 97/68/EC (Open Operator's Station and SE Tractors)
Reference 245-20-111, CAN BUS Systems on Tractors with Stage II Engine to 97/68/EC and Engine Control Unit (ECU), Level 12 (Open Operator's Station and SE Tractors)
Reference 245-20-999, CAN BUS Systems – Plug Layout
Group ATC: ATC - Automatic Temperature Control Unit
Reference 245-ATC-001, Calibration and Input Addresses (ClimaTrakClimaTrak is a trademark of Deere & Company )
Reference 245-ATC-100, Test Procedure in the Event of Occasional ATC Circuit Problems
Reference 245-ATC-101, Circuit/Harness Test of Sending Unit (B127) for Inside Air Temperature
Reference 245-ATC-102, Circuit/Harness Test of Front Sending Unit (B125) for Ambient Air Temperature
Reference 245-ATC-103, Circuit/Harness Test of Rear Sending Unit (B126) for Ambient Air Temperature
Reference 245-ATC-104, Circuit/Harness Test of Sending Unit (B130) for Refrigerant Pressure
Reference 245-ATC-105, Circuit/Harness Test for Air-Conditioning Relay (K09/4)
Reference 245-ATC-106, Circuit/Harness Test for Fan Motors (M07 and M10) and Driver Unit (A59)
Reference 245-ATC-107, Circuit/Harness Test of 5-Volt Supply Voltage
Reference 245-ATC-108, Circuit/Harness Test of Water Valve (B131)
Reference 245-ATC-109, Circuit/Harness Test of Sending Unit (B129) for Evaporator Core Temperature
Reference 245-ATC-110, Circuit/Harness Test of Sending Unit (B128) for Actual Outlet Air Temperature
Reference 245-ATC-111, Circuit/Harness Test of Adjusting Motor for Air Distribution (B132)
Reference 245-ATC-112, Circuit/Harness Test of Defog Sensor (B143)
Reference 245-ATC-200, Theory of Operation
Group BCU: BCU - Basic Control Unit
Reference 245-BCU-001, Calibration and Input Addresses of Basic Functions
Reference 245-BCU-002, Calibration and Input Addresses of Hitch Control
Reference 245-BCU-100, Test Procedure in the Event of Occasional BCU Circuit Problems
Reference 245-BCU-101, Circuit Test for Rear PTO Remote Control Switch (S44)
Reference 245-BCU-102, Circuit Test for Rear PTO Switch (S21), CommandArm
Reference 245-BCU-103, Circuit Test for Rear PTO Switch (S21)
Reference 245-BCU-104, Circuit Test for PTO Preselector Switch (S45)
Reference 245-BCU-105, Circuit Test for Front PTO Switch S06 (with CommandArm)
Reference 245-BCU-106, Circuit Test for Front PTO Switch (S06)
Reference 245-BCU-107, Circuit Test for Front-Wheel Drive Switch (S63) (without HMS II)
Reference 245-BCU-108, Circuit Test for Front-Wheel Drive Switch (S05) (with HMS II)
Reference 245-BCU-109, Circuit Test for Differential Lock Switch (S22)
Reference 245-BCU-110, Circuit Test for Hazard Warning Light Switch (S62)
Reference 245-BCU-111, Circuit Test for Hazard Warning Light Switch (S66)
Reference 245-BCU-112, Circuit Test for Turn Signal Switch (S08)
Reference 245-BCU-113, Circuit Test for Wheel Speed Sender (B09) (on 6120-6620)
Reference 245-BCU-114, Circuit Test for Wheel Speed Sender (B09) (on 6820/6920)
Reference 245-BCU-115, Circuit Test for Wheel Speed Sender (B35) (on 6120-6620)
Reference 245-BCU-116, Circuit Test for Wheel Speed Sender (B35) (on 6820-6920)
Reference 245-BCU-117, Circuit Test for Record/Save Switch (S95)
Reference 245-BCU-118, Circuit Test for HMS Program Switch (S100)
Reference 245-BCU-119, Circuit Test for Handbrake Switch (B37)
Reference 245-BCU-120, Circuit Test for Engine Speed Sender (B01)
Reference 245-BCU-121, Circuit Test for PTO Speed Sender (B06)
Reference 245-BCU-122, Circuit Test for Front PTO Speed Sender (B58)
Reference 245-BCU-123, Circuit Test on Sensitivity Potentiometer (B26)
Reference 245-BCU-124, Circuit Test on Sensitivity Potentiometer (B97)
Reference 245-BCU-125, Circuit Test for Depth-Setting Potentiometer (B98)
Reference 245-BCU-126, Circuit Test for Depth-Setting Potentiometer (B27)
Reference 245-BCU-127, Circuit Test for Position Sensor (B21)
Reference 245-BCU-128, Circuit Test on Rate-of-Drop Potentiometer (B27)
Reference 245-BCU-129, Circuit Test on Rate-of-Drop Potentiometer (B97)
Reference 245-BCU-130, Circuit Test on Raise-Limit Potentiometer (B27)
Reference 245-BCU-131, Circuit Test on Raise-Limit Potentiometer (B97)
Reference 245-BCU-132, Circuit Test for Rapid-Raise Switch (S24)
Reference 245-BCU-133, Circuit Test for Rapid-Raise Switch (S24_A)
Reference 245-BCU-134, Circuit Test for Rear PTO Solenoid Valve (Y04)
Reference 245-BCU-135, Circuit Test for Front-Wheel Drive Solenoid Valve (Y03)
Reference 245-BCU-136, Circuit Test for Differential Lock Solenoid Valve (Y05)
Reference 245-BCU-137, Circuit Test for Front PTO Solenoid Valve (Y01)
Reference 245-BCU-138, Circuit Test on R.H. Draft Sensor (B19)
Reference 245-BCU-139, Circuit Test for L.h. Draft Sensor (B20)
Reference 245-BCU-140, Circuit Test for Draft Potentiometer (B41)
Reference 245-BCU-141, Circuit Test for Right Remote Control Switch (S23)
Reference 245-BCU-142, Circuit Test for Left Remote Control Switch (S68)
Reference 245-BCU-143, Circuit Test for Rockshaft Control Stepper Motor (M08)
Reference 245-BCU-144, Circuit Test on Relay for LTC Coolant Pump K02/3
Reference 245-BCU-145, Circuit Test for HMS Switch (S43)
Reference 245-BCU-146, Circuit Test for Air Brake Solenoid Valve (Y31)
Reference 245-BCU-147, Circuit Test for Alternator Relay (K02/2)
Reference 245-BCU-194, Circuit Test for Seat Switch (S40)
Reference 245-BCU-195, Circuit Test for Brake Pedal Switch in Premium Operator's Cab (B112/B88)
Reference 245-BCU-148, Circuit Test for Rear PTO Switch (S21) - Open Operator's Station
Reference 245-BCU-149, Circuit Test for Front PTO Switch (S06) - Open Operator's Station
Reference 245-BCU-150, Circuit Test for Front-Wheel Drive Switch (S63) - Open Operator's Station
Reference 245-BCU-151, Circuit Test for Differential Lock Switch (S22) - Open Operator's Station
Reference 245-BCU-152, Circuit Test for Turn Signal Switch (S08) - Open Operator's Station
Reference 245-BCU-153, Circuit Test for Wheel Speed Sender (B35) (Open Operator's Station)
Reference 245-BCU-154, Circuit Test for Engine Speed Sender (B01) - Open Operator's Station
Reference 245-BCU-155, Circuit Test for PTO Speed Sender (B06) - Open Operator's Station
Reference 245-BCU-156, Circuit Test for Front PTO Speed Sender (B58) (Open Operator's Station)
Reference 245-BCU-157, Circuit Test on Sensitivity Potentiometer (B26) (Open Operator's Station)
Reference 245-BCU-158, Circuit Test on Depth-Setting Potentiometer (Open Operator's Station)
Reference 245-BCU-159, Circuit Test for Position Sensor (B21) (Open Operator's Station)
Reference 245-BCU-160, Circuit Test on Rate-of-Drop Potentiometer (Open Operator's Station)
Reference 245-BCU-161, Circuit Test on Raise-Limit Potentiometer (Open Operator's Station)
Reference 245-BCU-162, Circuit Test for Rapid-Raise Switch (S24) - Open Operator's Station
Reference 245-BCU-163, Circuit Test for Rear PTO Solenoid Valve (Y04) - Open Operator's Station
Reference 245-BCU-164, Circuit Test for Front-Wheel Drive Solenoid Valve (Y03) - Open Operator's Station
Reference 245-BCU-165, Circuit Test for Differential Lock Solenoid Valve (Y05) - Open Operator's Station
Reference 245-BCU-166, Circuit Test on R.h. Draft Sensor (B19) - Open Operator's Station
Reference 245-BCU-167, Circuit Test on L.h. Draft Sensor (B20) - Open Operator's Station
Reference 245-BCU-168, Circuit Test for Left Remote Control Switch (S68) - Open Operator's Station
Reference 245-BCU-169, Circuit Test for Rockshaft Control Stepper Motor (M08) - Open Operator's Station
Reference 245-BCU-196, Circuit Test for Brake Pedal Switch (B112) - Open Operator's Station
Reference 245-BCU-170, Circuit Test for Rear PTO Switch (S21) - SE Tractors
Reference 245-BCU-171, Circuit Test for Front PTO Switch (S06) - SE Tractors
Reference 245-BCU-172, Circuit Test for Front-Wheel Drive Switch (S63) - SE Tractors
Reference 245-BCU-173, Circuit Test for Differential Lock Switch (S22) - SE Tractors
Reference 245-BCU-174, Circuit Test for Hazard Warning Light Switch (S106) - SE Tractors
Reference 245-BCU-175, Circuit Test for Turn Signal Switch (S08) - SE Tractors
Reference 245-BCU-176, Circuit Test for Wheel Speed Sender (B35) - SE Tractors
Reference 245-BCU-177, Circuit Test for Engine Speed Sender (B01) - SE Tractors
Reference 245-BCU-178, Circuit Test for PTO Speed Sender (B06) - SE Tractors
Reference 245-BCU-179, Circuit Test for Front PTO Speed Sender (B58) - SE Tractors
Reference 245-BCU-181, Circuit Test on Depth-Setting Potentiometer (B27) - SE Tractors
Reference 245-BCU-182, Circuit Test for Position Sensor (B21) - SE Tractors
Reference 245-BCU-183, Circuit Test on Rate-of-Drop Potentiometer (B27) - SE Tractors
Reference 245-BCU-184, Circuit Test on Raise-Limit Potentiometer (B27) - SE Tractors
Reference 245-BCU-185, Circuit Test for Rapid-Raise Switch (S24) - SE Tractors
Reference 245-BCU-186, Circuit Test for Rear PTO Solenoid Valve (Y04) - SE Tractors
Reference 245-BCU-187, Circuit Test for Front-Wheel Drive Solenoid Valve (Y03) - SE Tractors
Reference 245-BCU-188, Circuit Test for Differential Lock Solenoid Valve (Y05) - SE Tractors
Reference 245-BCU-189, Circuit Test for Front PTO Solenoid Valve (Y01) - SE Tractors
Reference 245-BCU-190, Circuit Test on R.h. Draft Sensor (B19) - SE Tractors
Reference 245-BCU-191, Circuit Test on L.h. Draft Sensor (B20) - SE Tractors
Reference 245-BCU-192, Circuit Test for Left Remote Control Switch (S68) - SE Tractors
Reference 245-BCU-193, Circuit Test for Rockshaft Control Stepper Motor (M08) - SE Tractors
Reference 245-BCU-197, Circuit Test for Brake Pedal Switch (B112) - SE Tractors
Reference 245-BCU-200, Theory of Operation (Basic Functions)
Reference 245-BCU-201, Theory of Operation (Hitch Control)
Group BIF: BIF - Basic Informator
Reference 245-BIF-001, Calibration and Input Addresses
Reference 245-BIF-100, Test Procedure in the Case of Occasional BIF Circuit Problems
Reference 245-BIF-101, Circuit Test for Fuel Gauge Sending Unit (B03)
Reference 245-BIF-102, Circuit Test for Coolant Temperature Gauge Sender (B08)
Reference 245-BIF-103, Circuit Test for Hydraulic Oil Temperature Sender (B60)
Reference 245-BIF-104, Circuit Test for Engine Oil Pressure Sender (B04)
Reference 245-BIF-105, Circuit Test for Transmission Oil Pressure Sender (B31)
Reference 245-BIF-106, Circuit Test of Sender for Restricted Air Cleaner Warning Light (B02)
Reference 245-BIF-107, Circuit Test for Alternator D+ Voltage
Reference 245-BIF-108, Circuit Test of Sender for Restricted Oil Filter Warning Light (B07)
Reference 245-BIF-109, Circuit Test for Switch that Warns of a Restriction at Hydraulic Oil Filter (B111) (AutoPowr/IVT transmission)
Reference 245-BIF-110, Circuit Test for Switch that Warns of a Restriction at Hydraulic Oil Filter (B111)
Reference 245-BIF-111, Circuit Test for the Roll-Mode Switch (RMS) (S32)
Reference 245-BIF-200, Theory of Operation
Group ECU: ECU - Engine Control Unit
Reference 245-ECU-001, Calibration and Input Addresses
Reference 245-ECU-100, Diagnosis of Electrical Circuits for Level 1 and Level 4 Engine Control Units (ECU)
Reference 245-ECU-101, Diagnosis of Electrical Circuits for Level 11 and Level 12 Engine Control Units (ECU)
Reference 245-ECU-200, Theory of Operation (Stage I Engines to 97/68/EC; Level 1)
Reference 245-ECU-201, Theory of Operation (Stage I Engines to 97/68/EC; Level 4)
Reference 245-ECU-202, Theory of Operation (Stage II Engines to 97/68/EC; Level 11 with AutoQuad Transmission)
Reference 245-ECU-203, Theory of Operation (Stage II Engines to 97/68/EC; Level 11 with AutoPowr/IVT Transmission)
Reference 245-ECU-204, Theory of Operation (Stage II Engines to 97/68/EC; Level 12)
Reference 245-ECU-205, CAN BUS Information
Group EPC: EPC - Control Unit for PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions
Reference 245-EPC-001, Calibration and Input Addresses
Reference 245-EPC-002, EPC – Fine-Tuning
Reference 245-EPC-100, Test Procedure in the Event of Occasional EPC Circuit Problems
Reference 245-EPC-101, Circuit Test for Enable Proportional Solenoid Valve (Y38)
Reference 245-EPC-102, Circuit Test for Forward Solenoid Valve (Y33)
Reference 245-EPC-103, Circuit Test for Reverse Solenoid Valve (Y36)
Reference 245-EPC-104, Circuit Test for K1 Solenoid Valve (Y40)
Reference 245-EPC-105, Circuit Test for K2 Solenoid Valve (Y39)
Reference 245-EPC-106, Circuit Test for K3 Solenoid Valve (Y32)
Reference 245-EPC-107, Circuit Test for Transmission Speed Sender (B104/1) for 6820 and 6920 Tractors
Reference 245-EPC-108, Circuit Test for Transmission Speed Sender (B104/2) for 6120 - 6620 Tractors
Reference 245-EPC-109, Circuit Test for Enable Pressure Sender (B105)
Reference 245-EPC-110, Circuit Test for Clutch Pedal Switch (S72)
Reference 245-EPC-111, Circuit Test for Clutch Pedal Potentiometer (B65)
Reference 245-EPC-112, Circuit Test for Power/Eco Mode Switch (S85)
Reference 245-EPC-113, Circuit Test for Upshift and Downshift Switches (S48, S49 and S81) up to Tractor Serial Number 398655
Reference 245-EPC-114, Circuit Test for Transmission Enable Relay (K09/5)
Reference 245-EPC-115, Circuit Test for Come-Home Plug (K10/4)
Reference 245-EPC-116, Circuit Test for Reverse Drive Lever without N Indicator Light (A47)
Reference 245-EPC-117, Circuit Test for Park Switch (S114 or S116)
Reference 245-EPC-118, Circuit Test for Power Mode and Eco Mode Indicator Lights
Reference 245-EPC-119, Circuit Test for Reverse Drive Lever with N Indicator Light (A68) up to Tractor Serial Number 398655
Reference 245-EPC-120, Circuit Test for Solenoid Valve 1 (Y62)
Reference 245-EPC-121, Circuit Test for Solenoid Valve 2 (Y63)
Reference 245-EPC-122, Circuit Test for Auto-Mode Potentiometer (B144)
Reference 245-EPC-123, Circuit Test for Upshift and Downshift Switches (S102 and S125) from Tractor Serial Number 398656
Reference 245-EPC-124, Circuit Test for Auto-Mode Switch (S102)
Reference 245-EPC-125, Circuit Test for Reverse Drive Lever with N Indicator Light (A68) from Tractor Serial Number 398656
Reference 245-EPC-200, Theory of Operation
Group JDL: JDL - Control Unit for JDLink
Reference 245-JDL-001, JDLink Calibration and Input Addresses
Reference 245-JDL-200, JDLink - Theory of Operation
Group PLC: PLC - Park Lock Controller
Reference 245-PLC-001, Calibration and Input Addresses
Reference 245-PLC-100, Test Procedure in the Event of Occasional PLC Circuit Problems
Reference 245-PLC-101, Circuit Test for Park Lock Solenoid Valve (Y15-2)
Reference 245-PLC-102, Circuit Test for Transmission Output Speed Sender (B84)
Reference 245-PLC-103, Circuit Test for Park Lock Pressure Sender (B90)
Reference 245-PLC-104, Circuit Test for Acoustic Alarm (K10/2)
Reference 245-PLC-105, Circuit Test for Reverse Drive Lever (S80)
Reference 245-PLC-200, Theory of Operation
Group PRF: PRF - Performance Monitor
Reference 245-PRF-001, Calibration and Input Addresses
Reference 245-PRF-011, Calibration of Ground Speed Sensor (Radar)
Reference 245-PRF-021, Setting Wheel Slip Back to Zero
Reference 245-PRF-101, Circuit Test for Keypad Operation
Reference 245-PRF-200, Theory of Operation
Group SFA: SFA - Control Unit for Front-Wheel Drive Axle and Cab Suspension
Reference 245-SFA-001, Calibration and Input Addresses (Front-Wheel Drive Axle with TLS)
Reference 245-SFA-002, Calibration and Input Addresses of Cab Suspension
Reference 245-SFA-100, Test Procedure in the Event of Occasional SFA Circuit Problems
Reference 245-SFA-101, Circuit Test for Front-Wheel Drive Axle Solenoid Valves Y10 and Y11
Reference 245-SFA-102, Circuit Test for Cab Suspension Solenoid Valves Y42 and Y43
Reference 245-SFA-103, Circuit Test for TLS Position Sensor (B53)
Reference 245-SFA-104, Circuit Test for Cab Position Sensor (B110)
Reference 245-SFA-200, Theory of Operation
Group SIC: SIC - Control Unit for Electrically Activated Selective Control Valves
Reference 245-SIC-001, Calibration and Input Addresses
Reference 245-SIC-100, Preliminary Check of SIC Circuit
Reference 245-SIC-101, Circuit Test for Multi-Function Lever (S64)
Reference 245-SIC-102, Circuit Test for E-ICV Transport Lock Switch (S65)
Reference 245-SIC-103, Circuit Test for E-ICV Safety Switch (Integrated into S64)
Reference 245-SIC-104, Circuit Test for E-ICV no.1 Stepper Motor (M12)
Reference 245-SIC-105, Circuit Test for E-ICV no.2 Stepper Motor (M13)
Reference 245-SIC-106, Circuit Test for E-ICV no.3 Stepper Motor (M14)
Reference 245-SIC-107, Circuit Test for E-SCV no.1, Potentiometer or Switch at Control Lever is Faulty
Reference 245-SIC-108, Circuit Test for E-SCV no.2, Potentiometer or Switch at Control Lever is Faulty
Reference 245-SIC-109, Circuit Test for E-SCV no.3, Potentiometer or Switch at Control Lever is Faulty
Reference 245-SIC-110, Circuit Test for E-SCV no.4, Potentiometer or Switch at Control Lever is Faulty
Reference 245-SIC-111, Circuit Test for E-SCV Transport Lock Switch (S110)
Reference 245-SIC-112, Circuit Test for E-SCV Function Adjustment Knob (B115)
Reference 245-SIC-113, Circuit Test for E-SCV no.1 Stepper Motor (M36)
Reference 245-SIC-114, Circuit Test for E-SCV No.2 Stepper Motor (M37)
Reference 245-SIC-115, Circuit Test for E-SCV no.3 Stepper Motor (M38)
Reference 245-SIC-116, Circuit Test for E-SCV no.4 Stepper Motor (M39)
Reference 245-SIC-200, Theory of Operation
Group SSU: SSU - Control Unit for AutoTrac
Reference 245-SSU-001, Calibration and Input Addresses
Reference 245-SSU-100, Test Procedure in the Event of Occasional SSU Circuit Problems
Reference 245-SSU-101, Circuit Test for Wheel Angle Sensor (WAS) B139
Reference 245-SSU-102, Circuit Test for Steering Input Device SID (B138)
Reference 245-SSU-103, Circuit Test for AutoTrac Switch (S123)
Reference 245-SSU-104, Circuit Test for Steering Control Valve (Y49)
Reference 245-SSU-200, Theory of Operation, AutoTrac Control Unit
Group TCU: TCU - Control Unit for AutoPowr/IVT Transmission
Reference 245-TCU-001, Calibration and Input Addresses
Reference 245-TCU-001A, Output Test Mode Chart
Reference 245-TCU-100, Test Procedure in the Event of Occasional TCU Circuit Problems
Reference 245-TCU-101, Circuit Test for Transmission Enable Signal from Relay K02/1 and Clutch Pedal Switch (S72)
Reference 245-TCU-102, Circuit Test for Oil Temperature Sender
Reference 245-TCU-103, Circuit Test for Transmission Oil Filter Switch (S73)
Reference 245-TCU-104, Circuit Test for Transmission Oil Pressure Switch (S74)
Reference 245-TCU-105, Circuit Test for Switch (B87) of Filter By-Pass Valve (Cold-Weather Starting)
Reference 245-TCU-106, Circuit Test for Transmission Input Speed Sender (B61)
Reference 245-TCU-107, Circuit Test for Transmission Output Speed Sender (B63)
Reference 245-TCU-108, Circuit Test for Hydrostatic Speed Sender (B62)
Reference 245-TCU-109, Circuit Test for Park Lock Solenoid Valve (Y15-1)
Reference 245-TCU-110, Circuit Test for C1 Solenoid Valve
Reference 245-TCU-111, Circuit Test for C2 Solenoid Valve
Reference 245-TCU-112, Circuit Test for C3 Solenoid Valve
Reference 245-TCU-113, Circuit Test for C4 Solenoid Valve
Reference 245-TCU-114, Circuit Test for BG Solenoid Valve
Reference 245-TCU-115, Circuit Test for Hydrostatic Unit Proportional Solenoid Valve (Y1)
Reference 245-TCU-116, Circuit Test for Hydrostatic Unit Proportional Solenoid Valve (Y2)
Reference 245-TCU-117, Circuit Test for CF Proportional Solenoid Valve of the Forward Clutch
Reference 245-TCU-118, Circuit Test for CR Proportional Solenoid Valve of the Reverse Clutch
Reference 245-TCU-200, Theory of Operation
Group TEC: TEC - Control Unit for Tractor Equipment Interface
Reference 245-TEC-001, Calibration and Input Addresses
Reference 245-TEC-100, Test Procedure in the Event of Occasional TEC Circuit Problems
Reference 245-TEC-101, Circuit Test for Relay K46, Power Supply of Components at Implement BUS
Reference 245-TEC-102, Circuit Test for Relay K47, Power Supply of Implement BUS
Reference 245-TEC-200, Theory of Operation
Group UIC: UIC - User Interface Controller
Reference 245-UIC-001, Calibration and Input Addresses
Reference 245-UIC-100, Test Procedure in the Event of Occasional UIC Circuit Problems
Reference 245-UIC-101, Circuit Test for Reverse Drive Lever (S80)
Reference 245-UIC-102, Circuit Test for Cruise Control Potentiometer (A19)
Reference 245-UIC-103, Circuit Test for AutoPowr Selector (B83)
Reference 245-UIC-104, Circuit Test for Speed Wheel on Speed Control Lever (S108)
Reference 245-UIC-105, Circuit Test for Speed Control Lever (S108 and B67)
Reference 245-UIC-106, Circuit Test for Hand Throttle Potentiometer (B78)
Reference 245-UIC-107, Circuit Test for Accelerator Pedal Potentiometer (B79)
Reference 245-UIC-108, Circuit Test for Brake Pedal Sensors (B88)
Reference 245-UIC-109, Circuit Test for Clutch Pedal Potentiometer (B65)
Reference 245-UIC-110, Circuit Test for Front-Wheel Drive Axle Speed Sender (B89)
Reference 245-UIC-111, Circuit Test for Air Brake Solenoid Valve (Y31) (for Tractors up to Serial No. 398790)
Reference 245-UIC-112, Circuit Test for Seat Switch (S40)
Reference 245-UIC-113, Circuit Test for Come-Home Plug (K10/4)
Reference 245-UIC-200, Theory of Operation
Group UIM: UIM - User Interface Module, Keyboard for GreenStar Display 2100
Reference 245-UIM-001, Calibration and Input Addresses
Reference 245-UIM-200, Theory of Operation
Section 250: SYNCROPLUS TRANSMISSION
Group 05: Introductory Checks
Reference 250-05-001, Introductory Checks for Transmission and Hydraulic Diagnosis
Group 10: Operational Check-Out
Reference 250-10-001, SyncroPlus Transmission-Operational Check-Out
Group 15: Tests and Adjustments
Reference 250-15-001, SyncroPlus Transmission-System Check
Reference 250-15-002, SyncroPlus Transmission-Checking System Pressure
Reference 250-15-003, SyncroPlus Transmission-Adjusting System Pressure
Reference 250-15-004, SyncroPlus Transmission-Checking Components Dependent on System Pressure
Reference 250-15-005, SyncroPlus Transmission-Checking the Filter Relief Valve
Reference 250-15-006, SyncroPlus Transmission-Checking the Engagement Override Valve and Clutch Pedal Valve
Reference 250-15-007, SyncroPlus Transmission-Checking the Modulation of the Clutch Pedal Valve
Reference 250-15-008, SyncroPlus Transmission-Checking the Lube Oil Pressure
Reference 250-15-009, SyncroPlus Transmission-Checking the Cooling System
Reference 250-15-010, SyncroPlus Transmission-Checking the Rate of Flow
Reference 250-15-011, SyncroPlus Transmission-Checking the Cooler Relief Valve
Reference 250-15-012, SyncroPlus Transmission-Checking the Transmission Oil Filter
Reference 250-15-013, SyncroPlus Transmission-Layout of Test Ports and Sending Units
Reference 250-15-014, SyncroPlus Transmission-Checking and Adjusting the Shift Units
Reference 250-15-015, SyncroPlus Transmission-Adjusting the Park Lock
Reference 250-15-016, SyncroPlus Transmission-Checking and Adjusting the Linkage on the Range Transmission
Reference 250-15-017, SyncroPlus Transmission-Checking and Adjusting the Linkage on the Gear Transmission
Reference 250-15-018, SyncroPlus Transmission-Checking and Adjusting the Neutral Start Switch
Reference 250-15-019, SyncroPlus Transmission-Adjusting the Clutch Pedal
Group 20: Theory of Operation
Reference 250-20-001, Syncroplus Transmission-Summary of References
Reference 250-20-010, Syncroplus Transmission-Layout
Reference 250-20-020, SyncroPlus Transmission-Lubrication System
Reference 250-20-030, Syncroplus Transmission-Shift Linkage
Reference 250-20-040, Syncroplus Transmission-Synchronization
Reference 250-20-050, Syncroplus Transmission-Operation of Transmission Oil Circuit (including Diagram)
Reference 250-20-100, Perma Clutch II Module-Exploded View
Reference 250-20-110, Perma Clutch II Module-Layout
Reference 250-20-120, Perma Clutch II Module-Powerflow
Reference 250-20-130, Perma Clutch II Module-Transmission Oil Pump
Reference 250-20-140, Perma Clutch II Module-Hydraulic Circuit Diagram
Reference 250-20-150, Perma Clutch II Module-Description of Various Valves and Components
Reference 250-20-160, Perma Clutch II Module-Operation of Pressure Regulating Valve and Filter Relief Valve
Reference 250-20-170, Perma Clutch II Module-Operation of Clutch Pedal Valve and Engagement Override Valve
Reference 250-20-180, Perma Clutch II Module-Operation of Cooling System
Reference 250-20-200, Gear Transmission-Layout
Reference 250-20-210, Gear Transmission- Powerflow
Reference 250-20-220, Gear Transmission- Neutral Start Switch
Reference 250-20-300, Creeper Transmission- Layout and Operation
Reference 250-20-310, Creeper Transmission- Powerflow
Section 251: POWER REVERSER TRANSMISSION
Group 10: Operational Check-Out
Reference 251-10-001, Power Reverser Transmission-Operational Check-Out
Group 15: Tests and Adjustments
Reference 251-15-001, Power Reverser Transmission-System Check
Reference 251-15-002, Power Reverser Transmission-Checking System Pressure
Reference 251-15-003, Power Reverser Transmission-Adjusting System Pressure
Reference 251-15-004, Power Reverser Transmission-Checking Components Dependent on System Pressure
Reference 251-15-005, Power Reverser Transmission-Checking the Filter Relief Valve
Reference 251-15-006, Power Reverser Transmission-Checking and Adjusting the Engagement Override Valve and Clutch Pedal Valve
Reference 251-15-007, Power Reverser Transmission-Checking the Disk Clutch and Disk Brake
Reference 251-15-008, Power Reverser Transmission-Checking the Lube Oil Pressure
Reference 251-15-009, Power Reverser Transmission-Checking the Cooling System
Reference 251-15-010, Power Reverser Transmission-Checking the Rate of Flow
Reference 251-15-011, Power Reverser Transmission-Checking the Cooler Relief Valve
Reference 251-15-012, Power Reverser Transmission-Checking the Transmission Oil Filter
Reference 251-15-013, Power Reverser Transmission-Adjusting the Modulation Time
Reference 251-15-014, Power Reverser Transmission-Layout of Test Ports and Sending Units
Reference 251-15-015, Power Reverser Transmission-Checking and Adjusting the Shift Units
Reference 251-15-016, Power Reverser Transmission-Adjusting the Park Lock
Reference 251-15-017, Power Reverser Transmission-Checking and Adjusting the Linkage on the Range Transmission
Reference 251-15-018, Power Reverser Transmission-Checking and Adjusting the Linkage on the Gear Transmission
Reference 251-15-019, Power Reverser Transmission-Adjusting the Reverse Drive Linkage
Reference 251-15-020, Power Reverser Transmission-Adjusting the Reverse Drive Lever
Reference 251-15-021, Power Reverser Transmission-Adjusting the Clutch Pedal
Group 20: Theory of Operation
Reference 251-20-001, Power Reverser Transmission-Summary of References
Reference 251-20-010, Power Reverser Transmission-Layout
Reference 251-20-020, Power Reverser Transmission-Lubrication System
Reference 251-20-030, Power Reverser-Shift Linkage
Reference 251-20-040, Power Reverser Transmission-Synchronization
Reference 251-20-050, Power Reverser Transmission-Operation of Transmission Oil Circuit (including Diagram)
Reference 251-20-100, Power Reverser Module-Sectional View
Reference 251-20-110, Power Reverser Module-Components
Reference 251-20-120, Power Reverser Module-Layout and Powerflow
Reference 251-20-130, Power Reverser Module-Transmission Oil Pump
Reference 251-20-140, Power Reverser Module-Valves and Other Hydraulic Components
Reference 251-20-150, Power Reverser Module-Hydraulic Circuit Diagram
Reference 251-20-160, Power Reverser Module-Description of Various Valves and Components
Reference 251-20-170, Power Reverser Module-Operation of Pressure Regulating Valve and Filter Relief Valve
Reference 251-20-180, Power Reverser Module-Operation of Forward/Reverse Modulation
Reference 251-20-190, Power Reverser Module-Operation of Clutch Pedal Valve
Reference 251-20-200, Power Reverser Module-Operation of Engagement Override Valve
Reference 251-20-210, Power Reverser Module-Operation of Cooling System
Reference 251-20-300-Gear Transmission, Layout and Powerflow
Section 253: AUTOPOWR/IVT TRANSMISSION
Group 10: Operational Check-Out
Reference 253-10-001, AutoPowr/IVT Transmission - Operational Checkout
Group 15: Tests and Adjustments
Reference 253-15-003, Safety Measures when Testing the Transmission via the Output Test Mode for Components (Address TCU049)
Reference 253-15-001, AutoPowr/IVT Transmission - Test Result Table
Reference 253-15-001A, Determining the Cause of an Hydraulic Malfunction that Triggers Diagnostic Trouble Codes TCU 304077.07 and TCU 304079.07
Reference 253-15-001B, Determining Which Clutch has the Problem and What Type of Damage has Triggered Diagnostic Trouble Code TCU 304077.07
Reference 253-15-001C, Determining What Type of Damage has Triggered Diagnostic Trouble Code TCU 304079.07
Reference 253-15-002, AutoPowr/IVT Transmission - Checking the Transmission Oil Circuit
Reference 253-15-004, AutoPowr/IVT Transmission - Inter-active Test of Hydrostatic Unit with Service ADVISOR
Reference 253-15-005, AutoPowr/IVT Transmission - Test Ports (6320 to 6620)
Reference 253-15-006, AutoPowr/IVT Transmission - Test Ports (6820 and 6920)
Reference 253-15-007, AutoPowr/IVT Transmission - Checklist (List of Questions) for Diagnostic Trouble Code TCU304077.07
Reference 253-15-008, AutoPowr/IVT Transmission - Checklist (List of Questions) for Diagnostic Trouble Code TCU304079.07
Reference 253-15-009A, AutoPowr/IVT Transmission - Checklist (List of Questions) for AutoPowr/IVT Problems
Reference 253-15-009B, AutoPowr/IVT Transmission - Checklist (List of Questions) for Noises/Vibrations
Reference 253-15-010, AutoPowr/IVT Transmission - Checking System Pressure
Reference 253-15-011, AutoPowr/IVT Transmission - Checking Reduced System Pressure (Pressure for Other Consumers)
Reference 253-15-012, AutoPowr/IVT Transmission - Checking Oil Cooler Pressure
Reference 253-15-013, AutoPowr/IVT Transmission - Checking Lube Oil Pressure (When No Consumer is Activated)
Reference 253-15-014, AutoPowr/IVT Transmission - Checking Pressure at the C1 Clutch
Reference 253-15-015, AutoPowr/IVT Transmission - Checking Pressure at the C2 Clutch
Reference 253-15-016, AutoPowr/IVT Transmission - Checking Pressure at the C3 Clutch
Reference 253-15-017, AutoPowr/IVT Transmission - Checking Pressure at the C4 Clutch
Reference 253-15-018, AutoPowr/IVT Transmission - Checking Pressure at the BG Disk Brake
Reference 253-15-019, AutoPowr/IVT Transmission - Checking Pressure at the Forward Clutch (CF)
Reference 253-15-020, AutoPowr/IVT Transmission - Checking Pressure at the Reverse Clutch (CR)
Reference 253-15-021, AutoPowr/IVT Transmission - Checking Park Lock Pressure
Group 20: Theory of Operation
Reference 253-20-001, AutoPowr/IVT Transmission - Operation (Summary of References)
Reference 253-20-010, AutoPowr/IVT Transmission - Operation
Reference 253-20-011, AutoPowr/IVT Transmission - Layout of Transmission Sub-Assembly
Reference 253-20-012, AutoPowr/IVT Transmission - Sectional View of Transmission
Reference 253-20-013, AutoPowr/IVT Transmission - Transmission Peripherals
Reference 253-20-014, AutoPowr/IVT Transmission - Transmission Control Components
Reference 253-20-015, AutoPowr/IVT Transmission - Transmission Control
Reference 253-20-016, AutoPowr/IVT Transmission - Description of Transmission Oil Circuit
Reference 253-20-017, AutoPowr/IVT Transmission - Description of System Pressure Control Block
Reference 253-20-018, AutoPowr/IVT Transmission - Description of Clutch Control Block
Reference 253-20-019, AutoPowr/IVT Transmission - Operation of Hydrostatic Unit
Reference 253-20-020, AutoPowr/IVT Transmission - Diagram of Transmission
Reference 253-20-021, AutoPowr/IVT Transmission - Summary of Engaged Elements
Reference 253-20-022, AutoPowr/IVT Transmission - Power Flows
Reference 253-20-023, AutoPowr/IVT Transmission - Oil Flows
Reference 253-20-024, AutoPowr/IVT Transmission - Operation of Park Lock
Reference 253-20-025, AutoPowr/IVT Transmission - Shift Controls
Section 255: POWRQUAD, POWRQUAD PLUS, AUTOQUAD AND AUTOQUAD PLUS TRANSMISSIONS
Group 10: Operational Check-Out
Reference 255-10-001, PowrQuad Transmission - Operational Check-Out
Group 15: Tests and Adjustments
Reference 255-15-001, PowrQuad Transmission-System Check
Reference 255-15-002, PowrQuad Transmission-Test Ports
Reference 255-15-003, PowrQuad Transmission - Checking Rate of Flow at Cooler
Reference 255-15-021, PowrQuad Transmission - Check Cooler Relief Valve
Reference 255-15-004, PowrQuad Transmission - Checking System Pressure
Reference 255-15-003, PowrQuad Transmission - Checking Rate of Flow at Cooler
Reference 255-15-006, PowrQuad Transmission-Checking the Cooling Oil Control Valves
Reference 255-15-008, PowrQuad Transmission-Checking Pressure at Forward Clutch
Reference 255-15-009, PowrQuad Transmission - Checking Pressure at Reverse Brake
Reference 255-15-010, PowrQuad Transmission - Checking Pressure at B1 Brake
Reference 255-15-011, PowrQuad Transmission - Checking Pressure at B2 Brake
Reference 255-15-012, PowrQuad Transmission - Checking Pressure at B3 Brake
Reference 255-15-013, PowrQuad Transmission - Checking Pressure at C4 Clutch
Reference 255-15-014, PowrQuad Transmission-Adjusting System Pressure
Reference 255-15-015, PowrQuad Transmission-Test Result Table
Reference 255-15-016, PowrQuad Transmission-Adjusting the Reverse Drive Linkage
Reference 255-15-017, PowrQuad Transmission-Adjusting the Shift Linkage and Park Lock
Reference 255-15-018, Adjusting the Reverse Drive Lever (Reverser Control on Steering Column)
Reference 255-15-019, Checking and Adjusting the Shift Mechanisms/Linkages (PowrQuad Plus & AutoQuad Transm. up to Tractor Serial No. 398655)
Reference 255-15-020, Checking and Adjusting the Shift Mechanisms/Linkages (PowrQuad Plus & AutoQuad Plus Transm. from Tractor Serial No. 398656)
Group 20: Theory of Operation
Reference 255-20-001, PowrQuad, PowrQuad Plus and AutoQuad Transmissions - Summary of References
Reference 255-20-050, PowrQuad Transmission-Layout
Reference 255-20-100, PowrQuad Module-Layout
Reference 255-20-280, PowrQuad Module-Sectional and 3D View
Reference 255-20-290, PowrQuad Module-Location of Valves, Sensors and Switches
Reference 255-20-110, PowrQuad Module-Element Engagement Chart
Reference 255-20-120, PowrQuad Module-Pneumatic Pump
Reference 255-20-130, PowrQuad Module-Transmission Oil Pump
Reference 255-20-140, PowrQuad Module-Pressure-Regulating Valve and Filter Relief Valve
Reference 255-20-150, PowrQuad Module-Overspeed Relief Valve and Anti-Cavitation Check Valve
Reference 255-20-160, PowrQuad Module-Clutch Cooling Components
Reference 255-20-170, PowrQuad Module-Clutch Cooling Valve (Forward/Reverse)
Reference 255-20-180, PowrQuad Module-System 1 Oil and System 2 Oil
Reference 255-20-190, PowrQuad Module-Hydraulic Schematic, Mechanically Actuated PowrQuad Module
Reference 255-20-200, PowrQuad Module-Operation of Forward/Reverse Modulation, Mechanically Actuated PowrQuad Module
Reference 255-20-210, PowrQuad Module-Neutral Start Circuit, Mechanically Actuated PowrQuad Module
Reference 255-20-220, PowrQuad Module-Operation of Gear-to-Gear Modulation, Mechanically Actuated PowrQuad Module
Reference 255-20-230, PowrQuad Module-Hydraulic Schematic, Electrically Actuated PowrQuad Module
Reference 255-20-240, PowrQuad Module-Operation of Forward/Reverse Modulation, Electrically Actuated PowrQuad Module
Reference 255-20-250, PowrQuad Module-Operation of Gear-to-Gear Modulation, Electrically Actuated PowrQuad Module
Reference 255-20-260, PowrQuad Module-Reverse Drive Lever and Gear Shift Lever, Mechanically Actuated PowrQuad Module
Reference 255-20-270, PowrQuad Module-Reverse Drive Lever and Range Shift Lever with Gearshift Switches, Electrically Actuated PowrQuad Module
Reference 255-20-400, PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions-Summary of Transmission Versions
Reference 255-20-410, PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions-Components
Reference 255-20-420, PowrQuad Plus Transmission-Description of Shift Functions
Reference 255-20-430, AutoQuad Transmission-Description of Shift Functions
Reference 255-20-450, PowrQuad Plus Transmission (from Tractor Serial No. 398656)-Description of Shift Functions
Reference 255-20-460, AutoQuad Plus Transmission-Description of Shift Functions
Reference 255-20-440, PowrQuad Plus, AutoQuad and AutoQuad Plus Transmissions-Description of Clutch Actuation
Reference 255-20-500-Range Transmission (6020-6620 Tractors), Layout
Reference 255-20-510-Range Transmission (6020-6620 Tractors), Power-Flows
Reference 255-20-520-Range Transmission, Park Lock (6020-6620 Tractors)
Reference 255-20-530, Range Transmission (6820 and 6920 Tractors)-Layout
Reference 255-20-700, Creeper Transmission (6020-6620 Tractors)-Operation
Reference 255-20-710, Creeper Transmission (6020-6620 Tractors)-Powerflow
Reference 255-20-720, Creeper Transmission (6820 and 6920 Tractors)-Operation
Section 256: DRIVE SYSTEMS
Group 10: Operational Check-Out
Reference 256-10-001, Drive Systems - Operational Check
Group 15: Tests and Adjustments
Reference 256-15-001, Drive Systems-System Check
Reference 256-15-002, Checking Pressure at the Front-Wheel Drive Clutch
Reference 256-15-003, Checking Pressure at the Hydraulic Differential Lock
Reference 256-15-004, Checking Pressure at the Rear PTO
Reference 256-15-005, Checking Pressure at the Front PTO
Reference 256-15-006, Drive Systems-Test Result Table
Reference 256-15-007, Front PTO-Adjusting System Pressure
Group 20: Theory of Operation
Reference 256-20-001, Drive Systems-Summary of References
Reference 256-20-100, Front-Wheel Drive Clutch (6020 to 6620 Tractors)-Layout
Reference 256-20-110, Front-Wheel Drive Clutch (6020 to 6620 Tractors)-Oil-Flow and Power-Flow
Reference 256-20-120, Front-Wheel Drive Clutch (6020 to 6620 Tractors)-Cooling and Lubrication
Reference 256-20-130, Front-Wheel Drive Clutch (6820 and 6920 Tractors)-Layout
Reference 256-20-140, Front-Wheel Drive Clutch (6820 and 6920 Tractors)-Oil-Flow and Power-Flow
Reference 256-20-200, Differential (6020 to 6620 Tractors)-Layout
Reference 256-20-210, Differential (6820 and 6920 Tractors)-Layout
Reference 256-20-220, Differential - Power Flows
Reference 256-20-230, Differential-Oil-Flows
Reference 256-20-300, Final Drives (6020 to 6620 Tractors)-Operation and Layout
Reference 256-20-310, Final Drives (6820 and 6920 Tractors)-Operation and Layout
Reference 256-20-400, Rear PTO Options-Description
Reference 256-20-410, Rear PTO Options-PTO Modulating Valve and Solenoid Valve
Reference 256-20-420, Rear PTO Options-PTO Clutch and PTO Brake
Reference 256-20-430, Rear PTO Options (6820 and 6920 Tractors)-Lube Cut-Off Valve
Reference 256-20-440, Rear PTO Options-Power-Flows
Reference 256-20-500, Front PTO Options-Operation
Reference 256-20-510, Front PTO Options-Description, Hydraulic Circuit
Reference 256-20-520, Front PTO Options-PTO Modulating Valve and Solenoid Valve
Reference 256-20-530, Front PTO Options-Hydraulic Pump
Reference 256-20-540, Front PTO Options-Oil Cooler
Section 260: STEERING AND BRAKES
Group 05: Introductory Checks
Reference 260-05-001, Tests and Adjustments - Summary of References
Reference 260-05-001, Preliminary Checks - Steering System
Reference 260-05-002, Preliminary Checks - Brake System
Reference 260-05-003, Preliminary Checks - AutoTrac Steering System
Group 10: Operational Check-Out
Operational Checkout (Summary of References)
Reference 260-10-001, Safety Information
Reference 260-10-010, Steering Check
Reference 260-10-010, Brake Check
Reference 260-10-030, Operational Check of AutoTrac Steering System
Group 15: Tests and Adjustments
Reference 260-15-001, Tests and Adjustments - Summary of References
Reference 260-15-010, Special Tools
Reference 260-15-020, Connecting SensoControl Test Equipment
Reference 260-15-030, Specifications
Reference 260-15-040, Checking the Steering Valve
Reference 260-15-050, Checking the Brake System
Reference 260-15-060, Bleeding the Brakes (Brake Valve, Power-Fill Brakes and MFWD and Disk Brake)
Reference 260-15-070, Adjusting the Brake Pedals and Switches
Reference 260-15-080, Handbrake Checks
Reference 260-15-090, Checking the Trailer Brake Valve
Reference 260-15-100, Adjusting the Trailer Brake Valve
Reference 260-15-110, Checking the Air Brake (Visual Inspection)
Reference 260-15-120, Checking the System for Leaks
Reference 260-15-130, Checking the “Supply” Coupling End
Reference 260-15-140, Checking the Pressure Limiting Valve or Precharge Valve
Reference 260-15-145, Adjusting the Precharge Valve (from serial no. 398656)
Reference 260-15-150, Checking the Dual-Line Brake Valve
Reference 260-15-160, Checking the Single-Line Brake Valve
Reference 260-15-170, Adjusting the Handbrake when Air Brakes are Equipped
Reference 260-15-200, AutoTrac Steering Accuracy Check
Group 20: Theory of Operation
Reference 260-20-001, Operation - Summary of References
Reference 260-20-010, Description of Steering Valves, Operation
Reference 260-20-020, Brake Valve (with Power Fill), Operation
Reference 260-20-030, Brake Valve (with MFWD and Disk Brakes), Operation
Reference 260-20-040, Rear Wheel Brakes, Operation
Reference 260-20-050, Handbrake, Description
Reference 260-20-060, Trailer Brake Valve, Description
Reference 260-20-080, Description of Air Brake System
Reference 260-20-081, Description of Air Brake System (from Serial Number 398656)
Reference 260-20-100, AutoTrac - Operation
Section 270: HYDRAULIC SYSTEM
Group 10: Operational Check-Out
Reference 270-10-010, Hydraulic System Load Check
Reference 270-10-020, Hitch Control - Operational Checkout
Reference 270-10-030, External Control of Hitch - Operational Checkout
Reference 270-10-040, Selective Control Valves - Operational Checkout
Reference 270-10-050, Independent Control Valve (Electrically Actuated) - Operational Checkout
Group 15: Tests and Adjustments
Reference 270-15-001, Safety Measures for Hydraulic Checks
Reference 270-15-010, Heating Up Hydraulic Oil
Reference 270-15-011, Hydraulic System - Oil Pressure Test Ports
Reference 270-15-012, Checking the PFC Hydraulic System
Reference 270-15-013, PFC Hydraulic System - Test Result Table
Reference 270-15-020, Checking the PC Hydraulic System
Reference 270-15-021, PC Hydraulic System - Test Result Table
Reference 270-15-030, Charge Pump - Checking Lube Oil Pressure
Reference 270-15-031, Charge Pump - Checking the Delivery Rate
Reference 270-15-050, Hydraulic Pump - Testing and Adjusting the System Pressure (PFC Hydraulic System)
Reference 270-15-051, Hydraulic Pump - Checking the Delivery Rate (PFC Hydraulic System)
Reference 270-15-052, Hydraulic Pump-Checking the Delivery Rate (PC Hydraulic System)
Reference 270-15-053, Hydraulic Pump - Checking the Pressure-and-Flow Regulator
Reference 270-15-070, Checking the Pressure Differential Dynamically (PFC Hydraulic System Only)
Reference 270-15-071, Checking the LS (Load-Sensing) Pressure
Reference 270-15-090, Selective Control Valves - Check for Leaks at Valve Spools (PFC Hydraulic System Only)
Reference 270-15-091, Selective Control Valves - Checking for Leaks at Couplers
Reference 270-15-092, 300 and 301 Series Selective Control Valves-Adjust Detent Kickout Relief Valve Parts
Reference 270-15-093, Selective Control Valves - Adjusting Left Endplate (with LS Pressure Port and Adjustable LS Pressure Relief)
Reference 270-15-094, Selective Control Valves - Adjusting Right Endplate (with Extra Ports and Adjustable LS Pressure Relief)
Reference 270-15-095, Selective Control Valves - Adjusting the Spacer Housing (with Extra Ports and Adjustable LS Pressure Relief)
Reference 270-15-110, Checking the Stepper Motor and Rockshaft Valve
Reference 270-15-130, Rockshaft Valve - Checking for Leaks
Reference 270-15-131, Rockshaft Valve (Wide Version) - Checking the Pressure-Relief Valve
Reference 270-15-132, Rockshaft Valve - Checking Depth to Which Pressure and Discharge Valves are Screwed In
Reference 270-15-150, Rockshaft - Checking the Position Sensor
Reference 270-15-151, Hitch - Checking and Adjusting Draft Sensors (6020 to 6620)
Reference 270-15-152, Rockshaft - Testing and Adjusting the Draft Potentiometer (6820 to 6920S)
Reference 270-15-170, Adjusting the Power Beyond Valve
Group 20: Theory of Operation
Reference 270-20-001, PFC Hydraulic System - Summary of References
Reference 270-20-002, PC Hydraulic System-Summary of References
Reference 270-20-010, PFC Hydraulic System - Description
Reference 270-20-020, PFC Hydraulic System - Operation
Reference 270-20-030, PFC Hydraulic System - Symbolic Representation
Reference 270-20-040, PFC Hydraulic System - Schematic View
Reference 270-20-050, PFC Hydraulic System - Three-Dimensional View
Reference 270-20-060, PC Hydraulic System-Description
Reference 270-20-070, PC Hydraulic System - Operation
Reference 270-20-080, PC Hydraulic System - Symbolic Representation
Reference 270-20-090, PC Hydraulic System-Schematic View
Reference 270-20-100, PC Hydraulic System-Three-Dimensional View
Reference 270-20-110, PFC Hydraulic System - Charge Pump, Description and Operation
Reference 270-20-120, PFC Hydraulic System-Description of Hydraulic Pump
Reference 270-20-130, PFC Hydraulic System-Oil Lines of Hydraulic Pump
Reference 270-20-140, PFC Hydraulic System - Operation of Hydraulic Pump
Reference 270-20-150, PFC Hydraulic System-Hydraulic Pump Operating Modes
Reference 270-20-160, PC Hydraulic System-Description of Hydraulic Pump
Reference 270-20-170, PC Hydraulic System-Oil Lines of Hydraulic Pump
Reference 270-20-180, PC Hydraulic System-Operation of Hydraulic Pump
Reference 270-20-190, Primary Hydraulic Oil Filter - Description
Reference 270-20-200, Hydraulic Oil Cooler - Description
Reference 270-20-210, PFC Hydraulic System - Description of Hydraulic Oil Filter
Reference 270-20-220, PC Hydraulic System-Description of Hydraulic Oil Filter
Reference 270-20-230, PC Hydraulic System-Description of Lube Priority Valve
Reference 270-20-240, PFC Hydraulic System - Description and Arrangement of Shuttle Valves
Reference 270-20-250, PFC Hydraulic System - Operation of Shuttle Valves
Reference 270-20-260, PC Hydraulic System - Description and Arrangement of Shuttle Valves
Reference 270-20-270, PFC Hydraulic System - Description of Main Block with Priority Valve
Reference 270-20-280, PFC Hydraulic System - Operation of Priority Valve in Main Block
Reference 270-20-290, PC Hydraulic System-Description of Main Block with Priority Valve and By-Pass Valve
Reference 270-20-300, PC Hydraulic System-Operation of Priority Valve and By-Pass Valve
Reference 270-20-310, Power Beyond Valve - Operation
Reference 270-20-320, Rockshaft - Description
Reference 270-20-330, Rockshaft - Operation of Rockshaft Control
Reference 270-20-340, Rockshaft - Operation of Rockshaft Valve
Reference 270-20-350, Rockshaft - Operation of Position Sensor
Reference 270-20-360, Rockshaft - Operation of Draft Sensor
Reference 270-20-370, Rockshaft - Description of Controls
Reference 270-20-380, Rockshaft - Direct Actuation
Reference 270-20-390, 100, 200 and 300 Series Selective Control Valves (Mechanically Actuated) - Description
Reference 270-20-400, 100 Series Selective Control Valve (Mechanically Actuated) - Operation
Reference 270-20-410, 200 Series Selective Control Valve (Mechanically Actuated) - Operation
Reference 270-20-420, 300 Series Selective Control Valve (Mechanically Actuated) - Operation
Reference 270-20-430, Selective Control Valves (Electrically Actuated) - Description
Reference 270-20-435, Selective Control Valves (Electrically Actuated) - Description of Controls
Reference 270-20-436, Selective Control Valves (Electrically Actuated) - Adjustment of Flow-Rate and Automatic Shut-Off
Reference 270-20-440, Selective Control Valves (Electrically Actuated) - Operation
Reference 270-20-470, 101, 201 and 301 Series Selective Control Valves - Description
Reference 270-20-480, Couplers - Description
Reference 270-20-490, Endplate of Selective Control Valves - Summary
Reference 270-20-500, Independent Control Valve - Description
Reference 270-20-505, Independent Control Valve (Electrically Actuated) - Description of Controls
Reference 270-20-510, Independent Control Valve - Operation
Section 280: MISCELLANEOUS
Group 10: Operational Check-Out
Reference 280-10-001, Front-Wheel Drive Axle with TLS-Operational Checkout
Group 15: Tests and Adjustments
Reference 280-15-001, Front-Wheel Drive Axle with TLS-System Check
Reference 280-15-002, Front-Wheel Drive Axle with TLS-Checking and Adjusting the Nitrogen Precharge
Reference 280-15-003, Front-Wheel Drive Axle with TLS-Adjusting the Sensor Rod (Position Sensor to Panhard Link)
Reference 280-15-004, Front-Wheel Drive Axle with TLS-Test Result Table
Group 20: Theory of Operation
Reference 280-20-001, Front-Wheel Drive Axle with TLS-Summary of References
Reference 280-20-100, Front-Wheel Drive Axle with TLS-Components
Reference 280-20-110, Front-Wheel Drive Axle with TLS-Operation
Reference 280-20-120, Front-Wheel Drive Axle with TLS-Description, Level Control
Reference 280-20-130, Front-Wheel Drive Axle with TLS-Position Sensor
Reference 280-20-140, Front-Wheel Drive Axle with TLS-Electronic Control Unit (SFA)
Reference 280-20-150, Front-Wheel Drive Axle with TLS-Control Block, Exploded View
Reference 280-20-160, Front-Wheel Drive Axle with TLS-Control Block, Sectional View
Reference 280-20-170, Front-Wheel Drive Axle with TLS-Hydraulic Circuit Diagram, Suspension Function
Reference 280-20-180, Front-Wheel Drive Axle with TLS-Hydraulic Circuit Diagram, Level Control (Up)
Reference 280-20-190, Front-Wheel Drive Axle with TLS-Hydraulic Circuit Diagram, Level Control (Down)
Section 290: OPERATOR'S CAB
Group 10: Operational Check-Out
Reference 290-10-001, Operational Checkout (Summary of References)
Reference 290-10-002, Air-Conditioning System, Heater and Operator’s Seat-Test Sequence
Reference 290-10-003, Hydro-Pneumatic Cab Suspension-Test Sequence
Reference 290-10-004, ClimaTrak ClimaTrak is a trademark of Deere & Company -Test Sequence
Group 15: Tests and Adjustments
Reference 290-15-001, Tests and Adjustments-Summary of References
Reference 290-15-010, Safety at Work
Reference 290-15-015, Handling Refrigerant
Reference 290-15-020, Safety Equipment
Reference 290-15-025, In an Emergency
Reference 290-15-030, Storage of Refrigerant Containers
Reference 290-15-035, R134a Refrigerant
Reference 290-15-040, Important
Reference 290-15-050, Special Tools
Reference 290-15-060, Specifications
Reference 290-15-065, Explanation of Checks
Reference 290-15-070, Pressure Deviations
Reference 290-15-080, MSG95 Operator's Seat Checks
Reference 290-15-100, Hydro-Pneumatic Cab Suspension-System Check
Reference 290-15-110, Hydro-Pneumatic Cab Suspension-Checking and Adjusting the Nitrogen Precharge
Reference 290-15-120, Hydro-Pneumatic Cab Suspension-Adjusting the Sensor Rod
Reference 290-15-130, Hydro-Pneumatic Cab Suspension-Test Result Table
Reference 290-15-200, ClimaTrak-Checks
Reference 290-15-210, ClimaTrak-Pressure Deviations
Group 20: Theory of Operation
Reference 290-20-001, Operation of Air Conditioning/Heating/Ventilation-Summary of References
Reference 290-20-002, Operation of Hydro-Pneumatic Cab Suspension-Summary of References
Reference 290-20-203, ClimaTrak ClimaTrak is a trademark of Deere & Company Operation - Summary of References
Reference 290-20-010, Principle of Heat Exchange
Reference 290-20-015, R134a Refrigerant
Reference 290-20-020, Refrigerant Circuit Layout (6120 to 6920S Tractors)
Reference 290-20-025, Refrigerant Circuit Layout (SE Tractors)
Reference 290-20-030, Refrigerant Circuit Operation
Reference 290-20-035, Component Description
Reference 290-20-040, Heating and Ventilation (6120 to 6920S Tractors)
Reference 290-20-045, Heating and Ventilation (SE Tractors)
Reference 290-20-050, Hydro-pneumatic Cab Suspension-Components
Reference 290-20-055, Hydro-pneumatic Cab Suspension-Operation
Reference 290-20-060, Hydro-pneumatic Cab Suspension-Description, Level Control
Reference 290-20-065, Hydro-pneumatic Cab Suspension-Position Sensor
Reference 290-20-070, Hydro-pneumatic Cab Suspension-Spherical Bearing
Reference 290-20-075, Hydro-pneumatic Cab Suspension-Hydraulic Cylinder/Accumulator
Reference 290-20-080, Hydro-pneumatic Cab Suspension-Control Unit (SFA)
Reference 290-20-085, Hydro-pneumatic Cab Suspension-Control Block, Components
Reference 290-20-090, Hydro-pneumatic Cab Suspension-Hydraulic Diagram “Raising”
Reference 290-20-095, Hydro-pneumatic Cab Suspension-Hydraulic Diagram “Lowering”
Reference 290-20-100, Hydro-pneumatic Cab Suspension-Hydraulic Diagram, “Suspension Function”
Reference 290-20-200, Operation of the ATC (ClimaTrakClimaTrak is a trademark of Deere & Company )
Section 299: SPECIAL TOOLS
Group 05: Special Tools (Dealer-Fabricated)
Reference 299-05-001, Special Tools (Dealer-Fabricated) - Summary
Reference 299-05-010, Holding Tool
Reference 299-05-011, Adjusting Tool
Reference 299-05-012, DFRW2-Needle Valve Test Hose Assembly
Reference 299-05-013, DFRW85-Reverse Brake Test Plate
Reference 299-05-014, DFLX10 and DFLX11-Test Harnesses
Reference 299-05-015, DFLX12-Special Tool for 11-BIT and 29-BIT CAN BUS
Reference 299-05-016, DFLX14-Solenoid Test Harness
Group 10: Special Tools and Test Equipment
JT05791A - Multimeter
Test Harness - KJD10265
John Deere Tractors 6020, 6020SE, 6120, 6120SE, 6220, 6220SE, 6320, 6320SE, 6420, 6420S, 6420SE, 6520, 6520SE, 6620, 6920, 6920S Diagnosis and Tests Service Technical Manual (TM4741)