Complete service Repair Manual Supplement for John Deere Excavator Logger 330LC, 370, with all the repair information to maintain, repair, and rebuild like professional mechanics.

John Deere Excavator Logger 330LC, 370 workshop repair manual Supplement includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM1911 - John Deere 330LC and 370 Excavator Logger Technical Manual Supplement - Repair.PDF
TM1911 - John Deere 330LC and 370 Excavator Logger Technical Manual Supplement - Repair.epub

Total Pages: 556 pages
File Format: PDF/EPUB/MOBI/AZW (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English

MAIN SECTIONS (SN. 081001-)
 Foreword
   Technical Information Feedback Form
   General Information
      Safety
      General Specifications
      Torque Values
      Fuels and Lubricants
   Tracks
      Track System
   Axles and Suspension Systems
      Axle Shaft, Bearings, and Reduction Gears
      Hydraulic System
   Engine Auxiliary Systems
      Cold Weather Starting Aids
      Speed Controls
      External Exhaust Systems
      External Fuel Supply Systems
   Electrical System
      Batteries, Support, and Cables
      Wiring Harness and Switches
      System Controls
   Frame or Supporting Structure
      Frame Installation
      Frame Bottom Guards
      Chassis Weights
   Operator's Station
      Removal and Installation
      Operator Enclosure
      Steps and Handholds
      Heating and Air Conditioning
   Sheet Metal and Styling
      Miscellaneous Shields
   Safety and Convenience
      Fire Extinguisher
      Horn and Warning Devices
   Pneumatic Systems
      Removal and Installation
   Excavator
      Frames
      Hydraulic System
   Dealer Fabricated Tools

tm1911 - 330LC and 370 Excavator Logger Repair Supplement (S.N. 081001-)

Table of Contents

Foreword

Technical Information Feedback Form

Section 00: General Information

Group 01: Safety

John Deere Excavator Logger Safety Features

Recognize Safety Information

Understand Signal Words

Follow Safety Instructions

Inspect Machine

Use Handholds and Steps

Use Seat Belt

Maintain Seat Belt

Move and Operate Machine Safely

Operate Only From Operator's Seat

Secondary Exits

Operate Machine Safely

(Road Builder) Dig with Caution

Operate with Caution

Avoid Tipping

Avoid Power Lines

Drive Machine Safely

Beware of Exhaust Fumes

Park Machine Safely

Keep Riders Off Machine

Operate Attachment Safely

Keep the Operator Protective Structure (OPS) in Place

Handle Fluids Safely-Avoid Fires

Prepare for Emergencies

Handle Starting Fluid Safely

Clean Trash from Machine

Protect Against Flying Debris

Wear Protective Clothing

Protect Against Noise

Handle Chemical Products Safely

Warn Others of Service Work

Stay Clear of Moving Parts

Support Machine Properly

Service Cooling System Safely

Practice Safe Maintenance

Remove Paint Before Welding or Heating

Avoid Heating Near Pressurized Fluid Lines

Avoid High-Pressure Fluids

Prevent Battery Explosions

Clean the Machine Regularly

Store Attachments Safely

Dispose of Waste Properly

Group 02: General Specifications

330LC Log Loader With Logger Front Live Heel Grapple With 2921 mm (9 Ft 7 In.) Track Gauge and Forestry Cab-Specifications

330LC Log Loader With Logger Front B-N-T Grapple With 3100 mm (10 Ft 2 In.) Track Gauge, Rear Entry Cab and Heavy Duty Belly Pan-Specifications

370 Log Loader With Logger Front Live Heel Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry Cab -Specifications

370 Road Builder With 2692 mm (8 Ft 10 In.) Track Gauge Specifications

330LC Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 4 m (13 Ft 1 In.) Arm and 2692 mm (8 Ft 10 In.) Track Gauge Working Ranges

330LC Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 3.2 m (10 Ft 6 In.) Arm and 2692 mm (8 Ft 10 In.) Track Working Ranges

330LC Log Loader Logger Front Live Heel Grapple with Rear Entry Cab Working Ranges

330LC Log Loader Logger Front B-N-T Grapple Working Ranges

370LC Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 4 m (13 Ft 1 In.) Arm and 2692 mm (8 Ft 10 In.) Track Gauge with Forestry Cab Working Ranges

370 Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 32 m (10 Ft 6 In.) Arm and 2692 mm (8 Ft 10 In.) Track Gauge with Forestry Cab Working Ranges

370 Log Loader Logger Front Live Heel Grapple Working Ranges

330LC Road Builder Working Ranges

370 Road Builder Working Ranges

330LC/370 Excavator Logger Engine Specifications

330LC and 370 Drain and Refill Capacities

Lift Capacity-330LC Logger Live Heel Grapple With 2921 mm (9 Ft 7 In.) Track Gauge and Rear Entry or Forestry Cab

Lift Capacity-330LC Logger Live Heel Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab

Lift Capacity-330LC Logger Butt-N-Top Grapple With 2921 mm (9 Ft 7 In.) Track Gauge and Forestry Cab

Lift Capacity-330LC Logger Butt-N-Top Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab

Lift Capacity-330LC Logger Road Builder With 2692 mm (8 Ft 10 In.) Track Gauge, 1179 kg (2,600 lb) Bucket

Lift Capacity-370 Logger Live Heel Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab

Lift Capacity-370 Logger Butt-N-Top Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab

Lift Capacity-370 Logger Road Builder With 2591 mm (8 Ft 10 in.) Track Gauge, 1179 kg (2,600 lb) Bucket

Group 03: Torque Values

Unified Inch Bolt and Cap Screw Torque Values

Metric Bolt and Cap Screw Torque Values

Additional Metric Cap Screw Torque Values

Check Oil Lines and Fittings

Service Recommendations for O-Ring Boss Fittings

Service Recommendations for Flat Face O-Ring Seal Fittings

Service Recommendations for 37° Flare and 30° Cone Seat Connectors

Service Recommendations For Flared Connections-Straight or Tapered Threads

Service Recommendations For Inch Series Four Bolt Flange Fittings

Service Recommendations for Metric Series Four Bolt Flange Fitting

Group 04: Fuels and Lubricants

Diesel Fuel

Dieselscan Fuel Analysis

Lubricity Of Diesel Fuels

Low Sulfur Diesel Fuel Conditioner

Diesel Fuel Storage

Fuel Tank

Do Not Use Galvanized Containers

Diesel Engine Oil

Hydraulic Oil

Cab and Riser Tilt Power Pack Oil

Swing Gearbox, Propel Gearbox and Pump Gearbox Oils

Track Roller, Front Idler, and Carrier Roller Oil

Track Adjuster, Working Tool Pivot, Swing Bearing, and Swing Bearing Gear Grease

Oil Filters

Lubricant Storage

Alternative and Synthetic Lubricants

Mixing of Lubricants

Section 01: Tracks

Group 0130: Track System

Service Equipment and Tools

Other Material

Specifications

Remove and Install Rock Guards

Measure Track Roller Wear

Remove and Install Track Roller

Remove and Install Track Carrier Roller

Disassemble and Assemble Track Carrier Roller

Measure Track Chain Link Wear

Measure Track Chain Bushing Wear

Adjust Track Sag

Disassemble and Assemble Track Adjuster Cylinder-330LC

Section 02: Axles and Suspension Systems

Group 0250: Axle Shaft, Bearings, and Reduction Gears

Specifications

Remove and Install Propel Gearbox-330LC

Group 0260: Hydraulic System

Service Equipment and Tools

Specifications

Remove and Install Propel Motor and Park Brake-330LC

Section 05: Engine Auxiliary Systems

Group 0505: Cold Weather Starting Aids

Other Material

Remove and Install Cold Weather Start Aid

Group 0515: Speed Controls

Specifications

Engine Speed Learning Procedure-Rear Entry Cab

Engine Speed Learning Procedure-Forestry and Road Builder Cab Excavator Logger

Group 0530: External Exhaust Systems

Remove and Install Muffler

Group 0560: External Fuel Supply Systems

Other Material

Specifications

Remove and Install Fuel Tank (Standard With Counterweight Tank)-330LC/370

Remove and Install Fuel Tank (High Capacity)-330LC/370

Section 16: Electrical System

Group 1671: Batteries, Support, and Cables

Charge Battery (Rear Entry Cab)

Adding 12-Volt Accessories

Group 1674: Wiring Harness and Switches

Functional Schematic and Component Location Legend

Forestry Cab Component Location Drawing

Rear Entry Cab Component Location Drawing

Road Builder Cab Component Location Drawing

Live Heel Grapple Frame Component Location Drawing

Butt-N-Top Grapple Frame Component Location Drawing

Road Builder Frame Component Location

Combo Machine Frame

Connecting Engine and Pump Controller (EPC) Harness Connector

Replacing Fuses Rear Entry Cab

Replacing Fuses-Forestry and Road Builder Cab

Fuse (Blade-Type) Color Codes

Remove and Install Forestry Cab Ground Straps

Remove and Install 24-Volt to 12-Volt Power Converter

Group 1675: System Controls

Welding On Machine

Remove and Install Engine and Pump Controller (EPC) (Forestry and Road Builder Cab)

Remove and Install Engine and Pump Controller (EPC) (Rear Entry Cab)

Section 17: Frame or Supporting Structure

Group 1740: Frame Installation

Welding On Machine

Group 1746: Frame Bottom Guards

Specifications

Under Decking Covers

Extreme Duty Swivel Guard

Group 1749: Chassis Weights

Service Equipment and Tools

Specifications

Remove and Install Counterweight

Remove and Install Counterweight With Fuel Tank

Section 18: Operator's Station

Group 1800: Removal and Installation

Specifications

Remove and Install Rear Entry Cab

Remove and Install Cab - Road Builder and Forestry Machines

Remove and Install Cab with Riser - Road Builder and Forestry Machines

Group 1810: Operator Enclosure

Other Material

Remove and Install Window Panel and Two Piece Molding

Remove and Install Rear Entry Cab Front and Door Windows

Remove and Install Cab Door Windows (Road Builder Machine)

Remove and Install Rear Entry Cab Right Side Window

Remove and Install Rear Entry Cab Door

Remove and Install Left Hand Window Guard - Rear Entry Cab

Remove and Install Left Side Windows - Rear Entry Cab

Remove and Install Cab Front OSHA Window

Remove and Install Rear Entry Cab OSHA Windows

Remove and Install Cab Front Window (Forestry Machine)

Remove and Install Cab Front Windows (Road Builder Machine)

Remove and Install Right Hand and Left Hand Front Window (Forestry Machine)

Remove and Install Left Hand and Right Hand Sliding Window (Forestry Machine)

Remove and Install Cab Left Hand Rear Window (Road Builder Machine)

Remove and Install Cab Right Hand Window (Road Builder Machine)

Remove and Install Rear Escape Window (Forestry Machine)

Remove and Install Rear Escape Window (Road Builder Machine)

Remove and Install Roof Window (Forestry Machine)

Remove and Install Cab Door (Forestry Machine)

Group 1822: Steps and Handholds

Specifications

Remove and Install High Capacity Fuel Tank (Option) Handhold

Remove and Install Step (72 Inch Rear Entry Cab)

Remove and Install Right Side Handrail

Remove and Install Right Side Handrail - Machines with Counterweight Fuel Tank

Remove and Install Left Side Handrail

Group 1830: Heating and Air Conditioning

Specifications

Heater and Air Conditioner

Remove and Install Air Conditioning Piping (Rear Entry Cab)

Remove and Install Receiver Dryer (Rear Entry Cab)

Remove and Install Receiver Dryer (Road Builder and Forestry Machines)

Remove and Install Heater Control Module (Rear Entry Cab)

Remove and Install Evaporator (Rear Entry Cab)

Remove and Install Heater Core and Blower Motor (Forestry and Road Builder Cab)

Remove and Install Heater Core and Blower Motor (Rear Entry Cab)

Remove and Install Heater Hoses (Forestry and Road Builder Cab)

Remove and Install Heater Hoses (Rear Entry Cab)

Section 19: Sheet Metal and Styling

Group 1913: Miscellaneous Shields

Remove and Install Log Deflector

Remove and Install Standard Side Guarding-330LC and 370 Loggers

Remove and Install High Profile Side Guarding With Counterweight Fuel Tank-330LC/370

Remove and Install Side Guarding With High Capacity Fuel Tank-330LC/370

Remove and Install Boom Mounted Arm Cylinder Guard

Remove and Install Boom Cylinder Guard

Section 20: Safety and Convenience

Group 2003: Fire Extinguisher

Remove and Install Fire Extinguisher

Group 2004: Horn and Warning Devices

Remove and Install Air Horn

Section 22: Pneumatic Systems

Group 2200: Removal and Installation

Remove and Install Air Compressor

Remove and Install Accumulator

Remove and Install Check Valve

Remove and Install Pressure Switch

Remove and Install Drain Valve

Remove and Install Air Horn Solenoid

Remove and Install Tilt Power Pack

Section 33: Excavator

Group 3340: Frames

Service Equipment and Tools

Specifications

Remove and Install Combo Piping

Remove and Install Thumb Piping (If Equipped)

Thumb Pilot Hydraulic Plumbing

Remove and Install Bucket Cylinder Guard

Remove and Install Arm (330LC/370 Live Heel Grapple)

Remove and Install Arm (Butt-N-Top Grapple)

Remove and Install Boom (Live Heel Grapple)

Remove and Install Boom (Butt-N-Top Grapple and Road Builder)

Inspect Arm and Boom Pins and Bushings-330LC/370

Group 3360: Hydraulic System

Service Equipment and Tools

Specifications

Remove and Install Hydraulic Filter Restriction Indicator Switch

Remove and Install Hydraulic Pressure Dump Solenoid (If Equipped)

Hydraulic Oil Cleanup Procedure Using Portable Filter Caddy

Remove and Install Pilot Pump-Butt-N-Top Grapple

Remove and Install Pilot Pump-Live Heel Grapple

Remove and Install Reserve Hydraulic Tank (If Equipped)

Remove and Install Proportional Solenoid Valve Manifold

Remove and Install Float and Auxiliary DCV Solenoids-Butt-N-Top Grapple

Remove and Install Grapple Solenoids-Live Heel Grapple

Remove and Install Cab Tilt Solenoids

Disassemble and Assemble Control Valve

Remove and Install Boom Cylinder-330LC/370

Remove and Install Arm Cylinder-330LC/370

Remove and Install Heel Cylinder-330LC/370

Remove and Install Grapple Tilt Cylinder -330LC/370

Disassemble Boom, Arm, or Heel Cylinder-330LC/370

Assemble Boom, Arm, or Heel Cylinder-330LC/370

Remove and Install Cab Tilt Cylinder

Disassemble and Assemble Cab Tilt Cylinder

Section 99: Dealer Fabricated Tools

Group 9900: Dealer Fabricated Tools

DF1063 Lift Bracket

DFT1130 Adapter

John Deere Excavator Logger 330LC, 370 Service Repair Manual Supplement (TM1911)