John Deere MY18 Tractors 6110R-6215R Diagnosis and Tests Service Technical Manual (TM410319)

Catalog: 
Make: 
Price: $165.00

John Deere MY18 Tractors 6110R-6215R Diagnosis and Tests Service Technical Manual (TM410319)

tm410319 - MY18 Tractors 6110R—6215R Diagnostics - (Worldwide Edition) Technical Manual.pdf

Complete Diagnosis & Tests Technical Manual with electrical wiring diagrams for John Deere MY18 Tractors 6110R, 6120R, 6130R, 6135R, 6145R, 6155R, 6175R, 6195R, 6215R - Worldwide Edition, with all the shop information to maintain, test, repair, service like professional mechanics.

John Deere MY18 Tractors 6110R-6215R workshop Diagnosis & Test technical manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

Total Pages: 15,392 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable, high quality)
Language: English

tm410319 - MY 18 Tractors 6110R—6215R Diagnostics -: (Worldwide Edition)

Table of Contents

Foreword

MY18 (Model Identification)

Section 210: General Information

Group 05: Safety Measures

General Information - Safety - Summary of References

Recognize Safety Information

Understand Signal Words

Follow Safety Instructions

Prevent Machine Runaway

Operating the Tractor Safely

Operating the Loader Tractor Safely

Passenger Seat

Use Safety Lights and Devices

Towing Trailers/Implements Safely (Mass)

Use Caution On Slopes and Uneven Terrain

Freeing a Mired Machine

Avoid Backover Accidents

Handle Fluids Safely—Avoid Fires

Handling Batteries Safely

Prepare for Emergencies

Avoid High-Pressure Fluids

Service Cooling System Safely

Remove Paint Before Welding or Heating

Avoid Heating Near Pressurized Fluid Lines

Work In Ventilated Area

Avoid Contact with Agricultural Chemicals

Handle Agricultural Chemicals Safely

Stay Clear of Rotating Drivelines

Wear Protective Clothing

Protect Against Noise

Practice Safe Maintenance

Avoid Hot Exhaust

Exhaust Filter Cleaning

Clean Exhaust Filter Safely

Read Operator Manuals for ISOBUS Implements

Use Steps and Handholds Correctly

Use Seat Belt Properly

Park Machine Safely

Use Proper Lifting Equipment

Construct Dealer-Made Tools Safely

Support Machine Properly

Work in Clean Area

Illuminate Work Area Safely

Service Machines Safely

Service Accumulator Systems Safely

Service Tires Safely

Use Proper Tools

Service Front-Wheel Drive Tractor Safely

Avoid Eye Contact With Radar

Keep ROPS Installed Properly

Replace Safety Signs

Replace Safety Signs

Dispose of Waste Properly

Live With Safety

Safety Measures on Electronic Control Units

Servicing Electronic Control Units

Welding Near Electronic Control Units

Keep Electronic Control Unit Connectors Clean

Safety Instructions for Replacing a Halogen Bulb

Safety Instructions for Replacing Xenon (HID) Bulbs and Ballast Units

Safety Instructions for Replacing LED Worklights

Group 10: General References

General Information - General References, Summary of References

Trademarks

Hydraulic Designators

Electrical Designators

General Information - Inch Bolt and Cap Screws, Torque Values

General Information - Metric Bolt and Cap Screws, Torque Values

General Information - Hydraulic System Inch Fittings, Torque Values

General Information - Hydraulic System Metric Fittings, Torque Values

General Information - Electrical System, Component Identification Table

General Information - Electrical System, How to Read a Diagnostic Schematic

General Information - Electrical System, Lead Numbers and Color Codes

General Information - Electrical System, Symbols in Schematic, Wiring and Harness Diagrams

General Information - Electrical System, Check the Connectors

General Information - Electrical System, Approach to Tabular Diagnostic Procedures

General Information - Electrical System, Troubleshooting Unsolved Problems

General Information - Electrical System, Worksheet for Circuit/Harness Test

General Information - Electrical System, Visual Check

General - Electrical System, Faults and Circuit Tests

General - Electrical System, Test for Open Circuit under Load

General Information - Electrical System, Seven-Step Test Procedure

General Information - Hydraulic System, Symbols in Circuit Diagrams

General - Regions and Country Versions

Section 211: Diagnostic Trouble Codes

Group AIC: AIC Control Software

AIC 000158.03 - Supply Voltage (ELX) Too High

AIC 000158.04 - Supply Voltage (ELX) Too Low

AIC 000168.03 - Supply Voltage (BAT) Too High

AIC 000168.04 - Supply Voltage (BAT) Too Low

AIC 000628.02 - Control Software, Internal Error

AIC 000628.12 - Control Software, Internal Fault

AIC 000629.12 - Control Software, Internal Error

AIC 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

AIC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

AIC 002007.09 - Incorrect CAN Bus Message, Information from RPT Control Software

AIC 002036.09 - Incorrect CAN Bus Message, Information from SCC Control Software

AIC 003509.03 - 5-V Supply Voltage 1, Voltage Too High

AIC 003509.04 - 5-V Supply Voltage 1, Voltage Too Low

AIC 003509.06 - 5-V Supply Voltage 1, Current Too High

AIC 003510.03 - 5-V Supply Voltage 2, Voltage Too High

AIC 003510.04 - 5-V Supply Voltage 2, Voltage Too Low

AIC 003510.06 - 5-V Supply Voltage 2, Current Too High

AIC 176865.02 - Remote Control Switch for Rear PTO, Malfunction

AIC 516315.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position H)

AIC 516316.06 - 12 V Supply Voltage, Current Too High

AIC 516317.06 - 12-V Supply Voltage 2, Current Too High

AIC 516446.09 - LIN Bus Message Cannot Be Received, Information from LIN Bus Module (Positions F and G)

AIC 516461.02 - Multi-Function Lever Out of Range

AIC 517168.02 - Position of CommandPRO™ Joystick, Out of Valid Range

AIC 520257.02 - Auto-Mode Switch Fault

AIC 520285.02 - Transport Lock/Hitch Dampening Button Fault

AIC 520285.03 - Transport Lock/Hitch Dampening Button, Voltage Too High

AIC 520285.11 - Transport Lock/Hitch Dampening Button Fault

AIC 520286.02 - Quick Raise/Lower Switch, Fault

AIC 520286.04 - Quick Raise/Lower Switch, Voltage Too Low

AIC 520286.11 - Quick Raise/Lower Switch, Fault

AIC 520425.07 - Received CAN Bus Messages, High Error Rate

AIC 520426.07 - Transmitted CAN Bus Messages, High Error Rate

AIC 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

AIC 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

AIC 520870.02 - Control Software, Internal Error

AIC 520871.02 - Control Software, Internal Error

AIC 520872.02 - Control Software, Internal Error

AIC 521274.09 - Incorrect LIN Bus 1 Message, Information from LIN Bus Module (Position D or H)

AIC 521275.09 - Incorrect LIN Bus 2 Message, Information from LIN Bus Module (Position E or M)

AIC 521276.09 - Incorrect LIN Bus 3 Message, Information from LIN Bus Module (Position K or P)

AIC 521277.09 - Incorrect LIN Bus 4 Message, Information from LIN Bus Module (Position F or G)

AIC 521401.02 - Control Lever for SCV X (Front Hitch) Out of Range

AIC 521404.02 - Control Lever for SCV XI Out of Range

AIC 521405.02 - Control Lever for SCV XII Out of Range

AIC 521406.02 - Control Lever for SCV XIII Out of Range

AIC 521407.02 - Control Lever for SCV XIV Out of Range

AIC 521408.02 - Select Saved Operating Depth Button, Out Of Range

AIC 521409.02 - Multi-Function Lever, Switch 1 (Front Left) Out of Range

AIC 521410.02 - Multi-Function Lever, Switch 2 (Front Right) Out of Range

AIC 521411.02 - Multi-Function Lever, Switch 3 (Rear Left) Out of Range

AIC 521412.02 - Multi-Function Lever, Switch 4 (Rear Right) Out of Range

AIC 521413.02 - Multi-Function Lever, Switch 5 (Side Left) Out of Range

AIC 521421.02 - Incorrect LIN Bus Message from LIN Bus Module (Position M), Internal Error

AIC 521422.02 - Incorrect LIN Bus Message from LIN Bus Module (Position M), Internal Error

AIC 521431.03 - Rear PTO, Signal Voltage Too High

AIC 521431.04 - Rear PTO, Signal Voltage Too Low

AIC 521432.03 - Front PTO, Signal Voltage Too High

AIC 521432.04 - Front PTO, Signal Voltage Too Low

AIC 521465.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position H)

AIC 521475.02 - Incorrect LIN Bus Message from LIN Bus Module (Position S) (Hitch Draft/Depth Control), Internal Error

AIC 521476.02 - Incorrect LIN Bus Message from LIN Bus Module (Position S) (Raise Height Limit), Internal Fault

AIC 521480.02 - Incorrect LIN Bus Message from LIN Bus Module (Position S) (Drop Rate), Internal Error

AIC 521481.02 - Rear PTO Switch, Signal Out of Valid Range

AIC 521481.07 - Rear PTO switch, Fault

AIC 521483.02 - Front PTO Switch, Signal Out of Valid Range

AIC 521483.07 - Front PTO Switch, Fault

AIC 521570.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position S)

AIC 521571.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position D)

AIC 521572.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position E)

AIC 521573.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position F)

AIC 521574.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Positions F and G)

AIC 521577.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position P)

AIC 522077.11 - Switch for iTEC™ Program Selection, Fault

AIC 522189.02 - Switch for iTEC™ Program Selection, Fault

AIC 522189.03 - Switch for iTEC™ Program Selection, Voltage Too High

AIC 522189.04 - Switch for iTEC™ Program Selection, Voltage Too Low

AIC 522189.11 - Switch for iTEC™ Program Selection, Fault

AIC 522549.02 - Save/Delete Speed (Accelerator Pedal) Button Fault

AIC 522551.02 - Economy Mode Switch Fault

AIC 522553.02 - Cruise Control Switch Fault

AIC 522769.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position M)

AIC 523343.02 - Switch on Multi-Function Lever, Fault

AIC 523343.03 - Switch on Multi-Function Lever, Voltage Too High

AIC 523343.04 - Switch on Multi-Function Lever, Voltage Too Low

AIC 523349.02 - AutoTrac™ Switch Fault

AIC 523349.03 - AutoTrac™ Switch, Voltage Too High

AIC 523349.04 - AutoTrac™ Switch, Voltage Too Low

AIC 523349.11 - AutoTrac™ Switch Fault

AIC 523652.09 - Incorrect LIN Bus Message, Information from LIN Bus Module (Position H)

AIC 523670.02 - Speed Control Lever Voltage Out of Range

AIC 523670.11 - Speed Control Lever Fault

AIC 523671.02 - Shift Unit, Signal Out of Valid Range

AIC 523671.07 - Shift Unit, Fault

AIC 523671.11 - Shift Unit, Fault

AIC 523671.13 - Shift Unit, Signal Out of Valid Range

AIC 523745.02 - Switch for iTEC™ Program Selection, Fault

AIC 523745.03 - Switch for iTEC™ Program Selection, Voltage Too High

AIC 523745.04 - Switch for iTEC™ Program Selection, Voltage Too Low

AIC 523745.11 - Switch for iTEC™ Program Selection, Fault

AIC 523775.02 - Multi-Function Lever Fault

AIC 523776.02 - Transport Lock Button of Multi-Function Lever, Fault

AIC 523804.02 - Multi-Function Lever, Left-Right Axis, Signal Out of Range

AIC 523804.03 - Multi-Function Lever, Left-Right Axis, Voltage Too High

AIC 523804.04 - Multi-Function Lever, Left-Right Axis, Voltage Too Low

AIC 523805.02 - Multi-Function Lever, Fore-Aft Axis, Signal Out of Range

AIC 523805.03 - Multi-Function Lever (E-ICV), Fore-Aft Axis, Voltage Too High

AIC 523805.04 - Multi-Function Lever, Fore-Aft Axis, Voltage Too Low

AIC 523923.02 - Control Lever for E-SCV I, Signal Out of Range

AIC 523923.03 - Control Lever for E-SCV I, Voltage Too High

AIC 523923.04 - Control Lever for E-SCV I, Voltage Too Low

AIC 523953.02 - Sensor Unit for Speed Control Lever, Signal Out of Range

AIC 523953.03 - Sensor Unit for Speed Control Lever, Voltage Too High

AIC 523953.04 - Sensor Unit for Speed Control Lever, Voltage Too Low

AIC 523954.11 - Sensor Unit for Speed Control Lever (Speed Wheel), Output Signals do Not Match

AIC 523971.03 - LIN Bus Module for Hitch Control (Position M), Voltage Too High

AIC 523971.04 - LIN Bus Module for Hitch Control (Position M), Voltage Too Low

AIC 523971.09 - LIN Bus Module for Hitch Control (Position M), Error Rate Too High

AIC 523971.13 - LIN Bus Module for Hitch Control (Position M), Internal Error

AIC 524017.31 - Reverse Drive Lever Supply Voltage Faulty

AIC 524019.31 - Reverse Drive Lever, Faulty Signal from Neutral Switch

AIC 524020.31 - INFORMATION FOR OPERATOR: Reverse Drive Lever is in the Position for Forward or Reverse Travel During Start-Up

AIC 524021.31 - Reverse Drive Lever Switches Actuated Simultaneously

AIC 524096.02 - Hand Throttle Potentiometer, Voltages at Channel 1 and 2 Not in Correct Ratio

AIC 524096.03 - Hand Throttle Potentiometer, Voltage Too High

AIC 524096.04 - Hand Throttle Potentiometer, Voltage Too Low

AIC 524101.02 - Control Lever for E-SCV VI Faulty

AIC 524102.02 - Control Lever for E-SCV V Faulty

AIC 524103.02 - Control Lever for E-SCV IV Faulty

AIC 524103.03 - Control Lever for E-SCV IV, Voltage Too High

AIC 523103.04 - Control Lever for E-SCV IV, Voltage Too Low

AIC 524104.02 - Control Lever for E-SCV III Faulty

AIC 524104.03 - Control Lever for E-SCV III, Voltage Too High

AIC 524104.04 - Control Lever for E-SCV III, Voltage Too Low

AIC 524105.02 - Control Lever for E-SCV II Faulty

AIC 524105.03 - Control Lever for E-SCV II, Voltage Too High

AIC 524105.04 - Control Lever for E-SCV II, Voltage Too Low

AIC 524212.02 - Depth-Setting Potentiometer Faulty

AIC 524212.03 - Depth-Setting Potentiometer Voltage Too High

AIC 524212.04 - Depth-Setting Potentiometer Voltage Too Low

AIC 524212.11 - Depth-Setting Potentiometer, Fault

AIC 524216.02 - Front PTO Switch Faulty

AIC 524216.09 - Incorrect CAN Bus Message, Information from PTF Control Software

AIC 524224.02 - Rear PTO Switch Faulty

AIC 524224.09 - Incorrect CAN Bus Message, Information from RPT Control Software

Group ATC: ATC Control Software

ATC 000158.03 - Control Software, Supply Voltage (ELX) Too High

ATC 000158.04 - Control Software, Supply Voltage (ELX) Too Low

ATC 000170.03 - Sensor for Inside Air Temperature, Voltage Too High

ATC 000170.04 - Sensor for Inside Air Temperature, Voltage Too Low

ATC 000628.12 - Control Software, Internal Error

ATC 000630.02 - Control Software, Internal Error

ATC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

ATC 000871.03 - Refrigerant Pressure Sensor, Voltage Too High

ATC 000871.04 - Refrigerant Pressure Sensor, Voltage Too Low

ATC 000871.13 - Sensor for Refrigerant Pressure, Refrigerant Pressure Out of Range Low

ATC 000871.18 - Refrigerant Pressure Sensor, Malfunction

ATC 000876.03 - A/C Compressor Clutch, Voltage Too High

ATC 000876.04 - A/C Compressor Clutch, Voltage Too Low

ATC 000923.03 - Circulation Blower Motor On, Voltage Too High

ATC 000923.04 - Circulation Blower Motor On, Voltage Too Low

ATC 000923.12 - Circulation Blower Motor Internal Fault

ATC 001546.03 - Heater Valve (Potentiometer), Voltage Too High

ATC 001546.04 - Heater Valve (Potentiometer), Voltage Too Low

ATC 001547.03 - Sensor for Evaporator Core Temperature, Voltage Too High

ATC 001547.04 - Sensor for Evaporator Core Temperature, Voltage Too Low

ATC 001548.03 - Outlet Air Temperature Sensor, Voltage Too High

ATC 001548.04 - Outlet Air Temperature Sensor, Voltage Too Low

ATC 001549.03 - Heater Valve (Actuator), Voltage Too High

ATC 001549.04 - Heater Valve (Actuator), Voltage Too Low

ATC 001549.07 - Heater Valve, Fault

ATC 001549.13 - Heater Valve, Not Calibrated

ATC 001551.03 - Pressurizer Fan Motor for Pressure Inside Cab, Voltage Too High

ATC 001551.04 - Pressurizer Fan Motor for Pressure Inside Cab, Voltage Too Low

ATC 002000.09 - Incorrect CAN BUS Message, Coolant Temperature from ECU Control Software

ATC 002071.09 - Incorrect CAN BUS Message, Information from CCU Control Software

ATC 002139.09 - Incorrect CAN BUS Message, Information from CSM Control Software

ATC 003509.03 - 5-Volt Supply Voltage, Voltage Too High

ATC 003509.04 - 5-Volt Supply Voltage, Voltage Too Low

ATC 003509.06 - 5-V Supply Voltage, Current Too High

ATC 520870.02 - Control Software, Internal Error

ATC 520871.02 - Control Software, Internal Error

ATC 520872.02 - Control Software, Internal Error

ATC 523848.03 - Actuator for Air Distribution (Potentiometer), Voltage Too High

ATC 523848.04 - Actuator for Air Distribution (Potentiometer), Voltage Too Low

ATC 523848.05 - Actuator for Air Distribution, Current Too Low

ATC 523848.06 - Actuator for Air Distribution, Current Too High

ATC 523848.07 - Actuator for Air Distribution, Fault

ATC 523848.13 - Actuator for Air Distribution, Not Calibrated

ATC 524202.03 - Sensor for Ambient Air Temperature (Rear), Voltage Too High

ATC 524202.04 - Sensor for Ambient Air Temperature (Rear), Voltage Too Low

ATC 524203.03 - Sensor for Ambient Air Temperature (Front), Voltage Too High

ATC 524203.04 - Sensor for Ambient Air Temperature (Front), Voltage Too Low

ATC 524219.02 - Defog Sensor, Frequency Out of Valid Range

ATC 524219.03 - Defog Sensor, Voltage Too High

ATC 524219.04 - Defog Sensor, Voltage Too Low

Group CCU: CCU Control Software

CCU 000084.04 - Wheel Speed Sensor, Voltage Too Low

CCU 000084.05 - Wheel Speed Sensor, Current Too Low

CCU 000096.03 - Fuel Level Sensor Voltage Too High

CCU 000096.04 - Fuel Level Sensor Voltage Too Low

CCU 000096.17 - Fuel Level Too Low

CCU 000111.01 - Coolant Level Too Low

CCU 000111.09 - Incorrect CAN BUS Message, Information from ECU Control Software

CCU 000126.16 - Transmission Oil Filter Restricted

CCU 000158.03 - Control Software, Supply Voltage (ELX) Too High

CCU 000158.04 - Control Software, Supply Voltage (ELX) Too Low

CCU 000168.04 - Control Software, Supply Voltage (BAT) Too Low

CCU 000177.00 - Transmission Oil Temperature Very High

CCU 000177.03 - Transmission Oil Temperature Sensor, Voltage Too High

CCU 000177.04 - Transmission Oil Temperature Sensor, Voltage Too Low

CCU 000177.09 - CAN Bus Message Cannot Be Received, Information from PTA Control Software

CCU 000177.16 - Transmission Oil Temperature High

CCU 000177.19 - Transmission Oil Temperature Sensor, Fault

CCU 000177.31 - Transmission Oil Temperature Sensor, Fault

CCU 000190.09 - CAN BUS Message Cannot Be Received, Information from ECU Control Unit

CCU 000190.19 - Engine Speed Sensor Fault

CCU 000190.31 - Engine Speed Sensor Fault

CCU 000237.02 - VIN Information, Mismatch

CCU 000237.14 - VIN Information, System Disabled

CCU 000237.31 - VIN Information, Incorrect

CCU 000247.09 - Incorrect CAN Bus Message, CAN Message from ECU Control Unit

CCU 000247.19 - Operating Hours Fault

CCU 000247.31 - Operating Hours Fault

CCU 000569.03 - Differential Lock Solenoid Valve, Voltage Too High

CCU 000569.06 - Differential Lock Solenoid Valve, Current Too High

CCU 000628.02 - Control Software, Internal Error

CCU 000628.12 - Control Software, Internal Fault

CCU 000629.12 - Control Software, Internal Error

CCU 000630.14 - Control Software, Internal Error

CCU 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

CCU 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

CCU 000959.09 - Incorrect CAN Bus Message, CAN Message from VTV Control Unit

CCU 001058.03 - Pressure Switch for Air Brake System, Voltage Too High

CCU 001058.04 - Pressure Switch for Air Brake System, Voltage Too Low

CCU 001058.12 - Pressure Switch for Air Brake System, Malfunction

CCU 001058.16 - INFORMATION FOR OPERATOR: Pressure Switch for Air-Brake System Is Not Activated (Pressure Too High)

CCU 001058.18 - INFORMATION FOR OPERATOR: Pressure Switch for Air-Brake System Is Not Activated (Pressure Too Low)

CCU 001069.02 - INFORMATION FOR OPERATOR: Tire Circumference Not or Incorrectly Calibrated

CCU 001231.12 - Implement CAN Bus, High Error Rate

CCU 001231.14 - Implement CAN Bus, Very High Error Rate

CCU 001713.02 - Hydraulic Oil Filter Sensor, Fault

CCU 001713.15 - Hydraulic Oil Filter Dirty

CCU 001713.16 - Hydraulic Oil Filter Blocked

CCU 001865.09 - Incorrect CAN Bus Message, Information from OIC Control Software

CCU 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Unit

CCU 002003.09 - Incorrect CAN Bus Message, Information from PTA Control Software

CCU 002005.09 - Incorrect CAN Bus Message, Information from TIA Control Software

CCU 002019.09 - Incorrect CAN BUS Message, Information from XSC Control Software

CCU 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

CCU 002139.09 - Incorrect CAN BUS Message, Information from CSM Control Software

CCU 002145.09 - Incorrect CAN Bus Message, Information from FCC Control Software

CCU 002198.09 - Incorrect CAN Bus Message, Information from XMA Control Software

CCU 002221.09 - Incorrect CAN Bus Message, Information from PLC Control Software

CCU 002602.09 - Incorrect CAN Bus Message, Information from OIC Control Software

CCU 002602.12 - Hydraulic Oil Level Sensor Fault

CCU 002602.16 - Hydraulic Oil Level Sensor, Value Too High

CCU 002602.18 - Hydraulic Oil Level Sensor, Value Too Low

CCU 003353.07 - Alternator Fault

CCU 003353.09 - Alternator Fault

CCU 003353.14 - Alternator Fault

CCU 003353.15 - Alternator, Temperature Too High

CCU 003509.03 - 5-Volt Supply Voltage 1, Voltage Too High

CCU 003509.04 - 5-Volt Supply Voltage 1, Voltage Too Low

CCU 003509.06 - 5-V Supply Voltage 1, Current Too High

CCU 003510.03 - 5-Volt Supply Voltage 2, Voltage Too High

CCU 003510.04 - 5-Volt Supply Voltage 2, Voltage Too Low

CCU 003510.06 - 5-V Supply Voltage 2, Current Too High

CCU 003597.03 - 12-Volt Supply Voltage, Voltage Too High

CCU 003597.06 - 12 V Supply Voltage, Current Too High

CCU 005016.06 - 12 V Supply Voltage, Current Too High

CCU 516102.00 - Engine Oil Level High

CCU 516102.01 - Low Engine Oil

CCU 516123.09 - Incorrect LIN Bus Message, LIN Message from Battery Cut-Off Relay

CCU 516123.14 - Battery Cut-Off Relay Mismatch

CCU 516123.31 - Battery Cut-Off Relay Fault

CCU 516942.12 - Anti-Blocking System (ABS) of Trailer, High Error Rate

CCU 517245.02 - INFORMATION FOR OPERATOR: Hydraulic Trailer Brake System, Fault

CCU 517245.03 - Solenoid Valve for Hydraulic Trailer Brake, Voltage Too High

CCU 517245.05 - Solenoid Valve for Hydraulic Trailer Brake, Voltage Too Low

CCU 517245.06 - Solenoid Valve for Hydraulic Trailer Brake, Current Too High

CCU 517245.19 - INFORMATION FOR OPERATOR: Hydraulic Trailer Brake, Fault

CCU 517245.31 - Hydraulic Trailer Brake, Fault

CCU 517368.12 - Trailer Brake, Malfunction

CCU 520425.07 - Received CAN Bus Messages, High Error Rate

CCU 520426.07 - Transmitted CAN Bus Messages, High Error Rate

CCU 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

CCU 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

CCU 520870.02 - Control Software, Internal Error

CCU 521979.06 - Keep-Alive Signal, Current Too High

CCU 522451.02 - Wheel Angle Sensor, Voltages in Channel 1 and Channel 2 Not in Correct Ratio

CCU 522451.03 - Wheel Angle Sensor Channel 2, Voltage Too High

CCU 522451.04 - Wheel Angle Sensor Channel 2, Voltage Too Low

CCU 522578.09 - CAN Bus Message Cannot Be Received, Information from CSM Control Software

CCU 522578.19 - Switch for Selecting Front-Wheel Drive as Brake Assistance, Malfunction

CCU 522578.31 - Switch for Selecting Front-Wheel Drive as Brake Assistance, Malfunction

CCU 522580.09 - CAN Bus Message Cannot Be Received, Information from CSM Control Software

CCU 522580.19 - Switch for Automatic Mode of Front-Wheel Drive, Malfunction

CCU 522580.31 - Switch for Automatic Mode of Front-Wheel Drive, Malfunction

CCU 522581.09 - CAN Bus Message Cannot Be Received, Information from CSM Control Software

CCU 522581.19 - Switch for Switching On Front-Wheel Drive, Malfunction

CCU 522581.31 - Switch for Switching On Front-Wheel Drive, Malfunction

CCU 523219.04 - Differential Lock Solenoid Valve, Voltage Too Low

CCU 523666.03 - Control Software, Supply Voltage (BAT) Too High

CCU 523666.04 - Control Software, Supply Voltage (BAT) Too Low

CCU 523769.31 - Front-Wheel Drive Switch, Fault

CCU 523789.13 - Wheel Angle Sensor Not Calibrated

CCU 523826.03 - Wheel Angle Sensor Channel 1, Voltage Too High

CCU 523826.04 - Wheel Angle Sensor Channel 1, Voltage Too Low

CCU 523826.09 - Incorrect CAN BUS Message, CAN Message (Steering Angle Sensor) from XSC Control Software

CCU 524157.09 - Incorrect CAN Bus Message, CAN Message from OIC Control Software

CCU 524157.19 - Brake Pedal, Right Signal, Malfunction

CCU 524157.31 - Brake Pedal, Right Signal, Malfunction

CCU 524162.09 - Incorrect CAN Bus Message, CAN Message from OIC Control Software

CCU 524162.19 - Brake Pedal, Left Signal, Malfunction

CCU 524162.31 - Brake Pedal, Left Signal, Malfunction

CCU 524191.02 - INFORMATION FOR OPERATOR: Air-Brake System, Fault

CCU 524191.03 - Air Brake System Solenoid Valve Voltage Too High

CCU 524191.05 - Air Brake System Solenoid Valve Voltage Too Low

CCU 524191.06 - Air Brake System Solenoid Valve Current Too High

CCU 524191.19 - INFORMATION FOR OPERATOR: Air-Brake System, Fault

CCU 524191.31 - Air-Brake System, Fault

CCU 524198.02 - Rear Chassis Control Unit, Internal Error

CCU 524218.09 - Incorrect CAN Bus Message, CAN Message from OIC Control Software

CCU 524218.19 - Park Lock Fault

CCU 524218.31 - Park Lock Fault

CCU 524223.03 - Differential Lock Switch, Fault

CCU 524235.03 - Front-Wheel Drive Solenoid Valve, Voltage Too High

CCU 524235.06 - Front-Wheel Drive Solenoid Valve, Current Too High

Group CLC: CLC Control Software

CLC 000444.06 - Control Software CLC, Current Too High

CLC 000628.02 - Control Software, Internal Error

CLC 000630.13 - Control Software, Internal Error

CLC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

CLC 000920.03 - Acoustic Alarm Voltage Too High

CLC 000920.06 - Acoustic Alarm Current Too High

CLC 001865.09 - Incorrect CAN Bus Message, Information from OIC Control Software

CLC 001877.06 - Implement Switch, Current Too High

CLC 001877.09 - Incorrect CAN Bus Message, Information from HCC Control Software

CLC 001877.19 - Hitch Control Fault

CLC 001877.31 - Hitch Control Fault

CLC 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Unit

CLC 002025.09 - Incorrect CAN Bus Message, Information from ATC/ETC Control Software

CLC 002040.09 - Incorrect CAN Bus Message, Information from PDU Control Software

CLC 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

CLC 002050.06 - Control Software, Current Too High

CLC 002055.09 - Incorrect CAN Bus Message, Information from RLC Control Software

CLC 002071.09 - Incorrect CAN BUS Message, Information from CCU Control Software

CLC 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

CLC 002145.09 - Incorrect CAN Bus Message, Information from FCC Control Software

CLC 002240.09 - Incorrect CAN Bus Message, Information from TEC Control Software

CLC 002368.03 - Left Extra-Wide Vehicle Warning Light (ECE), Voltage Too High

CLC 002368.05 - Left Extra-Wide Vehicle Warning Light (ECE), Current Too Low

CLC 002368.06 - Left Extra-Wide Vehicle Warning Light (ECE), Current Too High

CLC 002370.03 - Right Extra-Wide Vehicle Warning Light (ECE), Voltage Too High

CLC 002370.05 - Right Extra-Wide Vehicle Warning Light (ECE), Current Too Low

CLC 002370.06 - Right Extra-Wide Vehicle Warning Light (ECE), Current Too High

CLC 002372.03 - Brake Light on Tractor, Voltage Too High

CLC 002372.05 - Brake Light on Tractor, Current Too Low

CLC 002372.06 - Brake Light on Tractor, Current Too High

CLC 002376.06 - Trailer Brake Light, Current Too High

CLC 002378.05 - Tail Light and Extra-Wide Vehicle Warning Light, Current Too Low

CLC 002378.06 - Tail Light and Extra-Wide Vehicle Warning Light, Current Too High

CLC 002392.03 - Back-Up Alarm, Voltage Too High

CLC 002392.06 - Back-Up Alarm, Current Too High

CLC 516676.09 - Incorrect CAN Bus Message, Information from HCC Control Software

CLC 516676.19 - Implement Switch Fault

CLC 516676.31 - Implement Switch Fault

CLC 520490.03 - Implement Supply Voltage, Voltage Too High

CLC 520490.06 - Implement Supply Voltage, Current Too High

CLC 520491.03 - Supply Voltage for a Control Unit on Implement, Voltage Too High

CLC 520491.06 - Supply Voltage for a Control Unit on Implement, Current Too High

CLC 520715.03 - Pressurizer Fan Motor for Pressure Inside Cab, Voltage Too High

CLC 520715.05 - Fan Motor for Pressure Inside Cab, Current Too Low

CLC 520715.06 - Fan Motor for Pressure Inside Cab, Current Too High

CLC 520870.02 - Control Software, Internal Error

CLC 521388.06 - Windshield Wiper (Home Position), Current Too High

CLC 521394.03 - Rear Window Wiper Motor, Voltage Too High

CLC 521394.06 - Rear Window Wiper Motor, Current Too High

CLC 521547.03 - Left Worklight on Rear of Fender, Voltage Too High

CLC 521547.06 - Left Worklight on Rear of Fender, Current Too High

CLC 521565.03 - Right Worklight on Rear of Fender, Voltage Too High

CLC 521565.06 - Right Worklight on Rear of Fender, Current Too High

CLC 521835.20 - Control Software CLC, Ground Contact Malfunction

CLC 522434.06 - Windshield Wiper (Slow), Current Too High

CLC 522435.06 - Windshield Wiper (Fast), Current Too High

CLC 522620.03 - Horn, Voltage Too High

CLC 522620.06 - Horn, Current Too High

CLC 522876.19 - CAN Bus Message, Fault

CLC 522876.31 - CAN Bus Message, Fault

CLC 524162.09 - CAN Bus Message Cannot be Received, Information from OIC Control Software

CLC 524259.00 - Cab Control Unit, Temperature Too High

CLC 524259.15 - Cab Control Unit, Temperature Too High

CLC 524259.16 - Cab Control Unit, Temperature Too High

Group CSC: CSC Control Software

CSC 000084.15 - Wheel Speed Detected During Calibration

CSC 000084.19 - Incorrect CAN Bus Message, Wheel Speed Signal Incorrect

CSC 000190.17 - Incorrect CAN Bus Message, Engine Speed Too Low

CSC 000190.19 - Incorrect CAN Bus Message, Engine Speed Not Detected

CSC 000574.19 - Incorrect CAN Bus Message, Enable Signal Not Detected or Incorrect

CSC 000629.12 - Control Software, Internal Error

CSC 000898.19 - Incorrect CAN Bus Message, Engine Speed Not Detected or Incorrect

CSC 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

CSC 002003.09 - Incorrect CAN Bus Message, Information from TIA/TIQ Control Software

CSC 002005.09 - Incorrect CAN Bus Message, Information from TIQ Control Software

CSC 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

CSC 002020.09 - Incorrect CAN Bus Message, Information from SFA Control Software

CSC 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

CSC 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

CSC 002145.09 - Incorrect CAN Bus Message, Information from FCC Control Software

CSC 003511.03 - 5-V Supply Voltage to CSC Sensors, Voltage Too High

CSC 003511.04 - 5-V Supply Voltage to CSC Sensors, Voltage Too Low

CSC 003511.06 - 5-V Supply Voltage to CSC Sensors, Current Too High

CSC 520425.07 - Received CAN Bus Messages, High Error Rate

CSC 520426.07 - Transmitted CAN Bus Messages, High Error Rate

CSC 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

CSC 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

CSC 520870.02 - Control Software, Internal Error

CSC 520870.13 - Control Software Not or Incorrectly Calibrated

CSC 520871.02 - Control Software, Internal Error

CSC 520871.13 - Control Software, Internal Error

CSC 520892.02 - Control Software, Internal Error

CSC 522288.03 - Proportional Solenoid Valve for Cab Suspension, Voltage Too High

CSC 522288.05 - Proportional Solenoid Valve for Cab Suspension, Current Too Low

CSC 522288.06 - Proportional Solenoid Valve for Cab Suspension, Current Too High

CSC 522457.19 - Incorrect CAN Bus Message, Commanded Transmission Speed

CSC 522763.19 - Reverse Drive Lever, Fault

CSC 523666.03 - Supply Voltage of Rear Chassis Control Unit, Voltage Too High

CSC 523666.04 - Supply Voltage of Rear Chassis Control Unit, Voltage Too Low

CSC 523671.19 - Incorrect CAN Bus Message, Signal from Reverse Drive Lever

CSC 523948.03 - Solenoid Valve for Lowering Cab Suspension, Voltage Too High

CSC 523948.05 - Solenoid Valve for Lowering Cab Suspension, Current Too Low

CSC 523948.06 - Solenoid Valve for Lowering, Current Too High

CSC 523949.03 - Solenoid Valve for Raising, Voltage Too High

CSC 523949.05 - Solenoid Valve for Raising, Current Too Low

CSC 523949.06 - Solenoid Valve for Raising, Current Too High

CSC 523973.02 - Cab Position Out of Valid Range (2 - 3 V) During Calibration

CSC 523973.03 - Cab Suspension All the Way Up, Voltage Too High (During Calibration)

CSC 523973.04 - Cab Suspension All the Way Down, Voltage Too Low (During Calibration)

CSC 523973.07 - Cab Suspension Does Not Reach Level Position in Target Time, Fault

CSC 523973.10 - Cab Suspension Fails to Reach Level Position or End Stops in the Target Time During Calibration

CSC 523973.13 - Cab Suspension Sensor Not Calibrated Correctly

CSC 523973.14 - Cab Suspension Sensor Not Calibrated

CSC 523973.15 - Sensor for Cab Suspension at Bottom Stop, Incorrect Sensor Signal

CSC 523973.16 - Pressure Reduction, Lowest Position Not Reached, Fault

CSC 523973.17 - Cab Suspension All the Way Up During Calibration, Incorrect Sensor Signal

CSC 523973.18 - Bleeding (Cab Suspension), Level Position Not Reached

CSC 523973.31 - Cab Moves in Wrong Direction During Calibration

CSC 524157.19 - Incorrect CAN Bus Message, Right Brake Pedal

CSC 524162.19 - Incorrect CAN Bus Message, Left Brake Pedal

CSC 524165.19 - Incorrect CAN Bus Message, Clutch

CSC 524167.19 - Incorrect CAN Bus Message, Transmission

Group CRU: CRU Control Software

CRU 000168.03 - Control Software, Supply Voltage (BAT) Too High

CRU 000237.02 - VIN Information, Mismatch

CRU 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

CRU 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

CRU 520194.02 - VIN Information, Mismatch

CRU 521156.12 - XM Satellite Radio, Fault

CRU 521780.06 - USB port, current too high

CRU 522453.12 - Control Software, Internal Error

CRU 524259.00 - CD Drive, Temperature Too High

CRU 524259.31 - Radio, Temperature Too High

Group CSM: CSM Control Software

CSM 000168.04 - Control Software, Supply Voltage (BAT) Too Low

CSM 000628.02 - Control Software, Internal Error

CSM 000628.12 - Control Software, Internal Error

CSM 000629.12 - Control Software, Internal Error

CSM 000630.02 - Control Software, Internal Error

CSM 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

CSM 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

CSM 002875.04 - Hazard Warning Light Button, Voltage Too Low

CSM 520425.07 - Received CAN Bus Messages, High Error Rate

CSM 520426.07 - Transmitted CAN Bus Messages, High Error Rate

CSM 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

CSM 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

CSM 521160.02 - Button for Volume Control (Lower Volume), Fault

CSM 521160.08 - Button for Volume Control (Lower Volume), Fault

CSM 521161.02 - Button for Volume Control (Raise Volume), Fault

CSM 521161.08 - Button for Volume Control (Raise Volume), Fault

CSM 521162.02 - Button for Previous Radio Station/Track, Fault

CSM 521162.08 - Button for Previous Radio Station/Track, Fault

CSM 521163.02 - Button for Next Radio Station/Track, Fault

CSM 521163.08 - Button for Next Radio Station/Track, Fault

CSM 521164.02 - Fan Control Button (+), Fault

CSM 521164.08 - Fan Control Button (+), Fault

CSM 521165.02 - Radio Mute Button, Fault

CSM 521165.08 - Radio Mute Button, Fault

CSM 521166.02 - Temperature Control Button (+), Fault

CSM 521166.08 - Temperature Control Button (+), Fault

CSM 521167.02 - Fan Control Button (-), Fault

CSM 521167.08 - Fan Control Button (-), Fault

CSM 521168.02 - Air Flow Distribution Button, Fault

CSM 521168.08 - Air Flow Distribution Button, Fault

CSM 521169.02 - Temperature Control Button (-), Fault

CSM 521169.08 - Temperature Control Button (-), Fault

CSM 521856.02 - Cancel Button (X Button), Fault

CSM 521856.08 - Cancel Button (X Button), Fault

CSM 522558.02 - Button for Switching the Differential Lock On and Off Manually, Fault

CSM 522558.08 - Button for Switching the Differential Lock On and Off Manually, Fault

CSM 522559.02 - Button for Switching the Differential Lock On and Off Automatically, Fault

CSM 522559.08 - Button for Switching the Differential Lock On and Off Automatically, Fault

CSM 522560.02 - Beacon Light Button, Fault

CSM 522560.08 - Beacon Light Button, Fault

CSM 522563.02 - Button for Light Combination 1 or 2, Fault

CSM 522563.08 - Button for Light Combination 1 or 2, Fault

CSM 522564.02 - ISOBUS (ISB) Button, Fault

CSM 522564.03 - ISOBUS (ISB) Button, Voltage Too High

CSM 522564.04 - ISOBUS (ISB) Button, Voltage Too Low

CSM 522564.08 - ISOBUS (ISB) Button, Fault

CSM 522565.02 - Button for Transport Lock (E-SCVs), Fault

CSM 522565.08 - Transport Lock Button (E-SCVs), Fault

CSM 522566.02 - Front-Wheel Drive Button, Fault

CSM 522566.08 - Front-Wheel Drive Button, Fault

CSM 522567.02 - Button for Automatic Mode of Front-Wheel Drive, Fault

CSM 522567.08 - Button for Automatic Mode of Front-Wheel Drive, Fault

CSM 522568.02 - iTEC™ Menu Hotkey, Fault

CSM 522568.08 - Phone Menu Hotkey, Fault

CSM 522569.02 - Position 16 Hotkey, Fault

CSM 522569.08 - Climate Control Menu Hotkey, Fault

CSM 522570.02 - Rear PTO Menu Hotkey, Fault

CSM 522570.08 - Lights Menu Hotkey, Fault

CSM 522571.02 - Reconfigurable Controls Menu Hotkey, Fault

CSM 522571.08 - Position 14 Hotkey, Fault

CSM 522572.02 - Transmission Menu Hotkey, Fault

CSM 522572.08 - E-SCV Menu Hotkey, Fault

CSM 522573.02 - Climate Control Menu Hotkey, Fault

CSM 522573.08 - Audio Menu Hotkey, Fault

CSM 522574.02 - Engine Menu Hotkey, Fault

CSM 522574.08 - Reconfigurable Controls Menu Hotkey, Fault

CSM 522575.02 - Lights Menu Hotkey, Fault

CSM 522575.08 - iTEC™ Menu Hotkey, Fault

CSM 522576.02 - Rear Hitch Menu Hotkey, Fault

CSM 522576.08 - Rear Hitch Menu Hotkey, Fault

CSM 522577.02 - Audio Menu Hotkey, Fault

CSM 522577.08 - Position 6 Hotkey, Fault

CSM 522578.02 - E-SCV Menu Hotkey, Fault

CSM 522578.08 - Transmission Menu Hotkey, Fault

CSM 522579.02 - Phone Menu Hotkey, Fault

CSM 522579.08 - Rear PTO Menu Hotkey, Fault

CSM 522580.02 - Next RunPage Button, Fault

CSM 522580.08 - Next RunPage Button, Fault

CSM 522581.02 - Position 2 Hotkey, Fault

CSM 522581.08 - Engine Menu Hotkey, Fault

CSM 522770.09 - LIN Bus Message Cannot Be Received, Information from LIN Bus Module (Position W)

CSM 522771.09 - LIN Bus Message Cannot Be Received, Information from LIN Bus Module (Position K)

Group ECU: ECU Control Software

ECU 000027.03 - EGR Valve Position Signal Out of Range High

ECU 000027.04 - EGR Valve Position Signal Out of Range Low

ECU 000027.07 - EGR Valve Actuator Fault

ECU 000051.03 - Air Throttle Actuator Position Signal Out of Range High

ECU 000051.04 - Air Throttle Actuator Position Signal Out of Range Low

ECU 000051.07 - Air Throttle Actuator Fault

ECU 000051.14 - Air Throttle Actuator and EGR Valve Connectors Swapped

ECU 000094.03 - Low-Pressure Fuel Signal Out of Range High

ECU 000094.04 - Low-Pressure Fuel Signal Out of Range Low

ECU 000094.16 - Low-Pressure Fuel Signal Moderately High

ECU 000094.17 - Low-Pressure Fuel Signal Slightly Low

ECU 000094.18 - Low-Pressure Fuel Signal Moderately Low

ECU 000097.03 - Water-In-Fuel Signal Voltage Out of Range High

ECU 000097.04 - Water-In-Fuel Signal Voltage Out of Range Low

ECU 000097.16 - Water-In-Fuel Level Moderately High

ECU 000098.09 - Incorrect CAN Bus Message, Information from Engine Oil Level Sensor

ECU 000098.12 - Engine Oil Level Sensor, Fault

ECU 000100.01 - Engine Oil Pressure Signal Extremely Low

ECU 000100.02 - Engine Oil Pressure Faulty

ECU 000100.03 - Engine Oil Pressure Signal Out of Range High

ECU 000100.04 - Engine Oil Pressure Signal Out of Range Low

ECU 000100.18 - Engine Oil Pressure Moderately Low

ECU 000101.00 - Crankcase Pressure Signal Extremely High

ECU 000101.03 - Engine Crankcase Pressure Signal Out of Range High

ECU 000101.04 - Engine Crankcase Pressure Signal Out of Range Low

ECU 000101.16 - Crankcase Pressure Moderately High

ECU 000102.03 - Manifold Air Pressure Signal Out of Range High

ECU 000102.04 - Intake Manifold Air Pressure Signal Out of Range Low

ECU 000102.07 - Manifold Air Pressure Sensor Signal Fault

ECU 000103.00 - VGT Speed Signal Extremely High

ECU 000103.02 - Turbocharger Speed Signal Invalid

ECU 000103.05 - Turbocharger Speed Sensor Resistance Too High

ECU 000105.00 - Manifold Air Temperature Extremely High

ECU 000105.03 - Manifold Air Temperature Sensor, Voltage Too High

ECU 000105.04 - Manifold Air Temperature Sensor, Voltage Too Low

ECU 000105.15 - Manifold Air Temperature Signal Slightly High

ECU 000105.16 - Manifold Air Temperature Signal Moderately High

ECU 000107.00 - Air Filter Pressure Differential Extremely High

ECU 000107.15 - Air Filter Pressure Differential Slightly High

ECU 000107.16 - Air Filter Pressure Differential Moderately High

ECU 000108.02 - Barometric Pressure Signal Invalid

ECU 000108.07 - Barometric Pressure Signal Mismatch

ECU 000109.01 - Coolant Pressure Signal Extremely Low

ECU 000109.03 - Coolant Pressure Signal Out of Range High

ECU 000109.04 - Coolant Pressure Signal Out of Range Low

ECU 000109.17 - Coolant Pressure Signal Slightly Low

ECU 000109.18 - Coolant Pressure Signal Moderately Low

ECU 000109.31 - Coolant Pressure Signal Fault

ECU 000110.00 - Coolant Temperature Signal Extremely High

ECU 000110.03 - Coolant Temperature Signal Too High

ECU 000110.04 - Coolant Temperature Signal Out of Range Low

ECU 000110.15 - Coolant Temperature Signal Slightly High

ECU 000110.16 - Coolant Temperature Signal Moderately High

ECU 000110.17 - Coolant Temperature Signal Slightly Low

ECU 000111.01 - Coolant Level Switch Activated at High Coolant Temperature

ECU 000111.07 - Coolant Level Switch Fault

ECU 000111.17 - Coolant Level Switch Activated

ECU 000111.18 - Coolant Level Switch Activated at Moderate Coolant Temperature

ECU 000152.12 - Control Software, Internal Error

ECU 000152.14 - Control Software, Internal Error

ECU 000152.16 - Control Software, Internal Error

ECU 000157.01 - Fuel Rail Pressure Signal Extremely Low

ECU 000157.02 - Fuel Rail Pressure Signal Invalid

ECU 000157.03 - Fuel Rail Pressure Signal Out of Range High

ECU 000157.04 - Fuel Rail Pressure Signal Out of Range Low

ECU 000157.12 - Fuel Rail Pressure Faulty

ECU 000157.16 - Fuel Rail Pressure Signal Moderately High

ECU 000157.17 - Fuel Rail Pressure Signal Slightly Low

ECU 000157.18 - Fuel Rail Pressure Signal Moderately Low

ECU 000158.12 - Control Software, Internal Error

ECU 000168.01 - Engine Control Unit, Supply Voltage (BAT) Too Low

ECU 000168.16 - Engine Control Unit, Supply Voltage (BAT) Moderately High

ECU 000168.17 - Engine Control Unit, Supply Voltage (BAT) Too Low

ECU 000168.18 - Engine Control Unit, Supply Voltage (BAT) Moderately Low

ECU 000174.00 - Fuel Temperature Signal Extremely High

ECU 000174.03 - Fuel Temperature Signal Out of Range High

ECU 000174.04 - Fuel Temperature Signal Out of Range Low

ECU 000174.16 - Fuel Temperature Signal Moderately High

ECU 000189.31 - Engine Speed Derate Condition Exists

ECU 000190.00 - Engine Speed Extremely High

ECU 000190.16 - Engine Speed Moderately High

ECU 000237.02 - VIN Information, Mismatch

ECU 000237.13 - VIN Information, Option Code Invalid

ECU 000237.31 - VIN Information, Incorrect

ECU 000412.00 - EGR Temperature Signal Extremely High

ECU 000412.03 - EGR Temperature Signal Out of Range High

ECU 000412.04 - EGR Temperature Signal Out of Range Low

ECU 000412.15 - EGR Temperature Signal Slightly High

ECU 000412.16 - EGR Temperature Signal Moderately High

ECU 000611.03 - Injection Valve Driver 1, Voltage Too High

ECU 000611.04 - Injection Valve Driver 1, Short To Ground

ECU 000612.03 - Injection Valve Driver 2, Voltage Too High

ECU 000612.04 - Injection Valve Driver 2, Short To Ground

ECU 000613.03 - Driver Of Fuel Pressure Control Valves, Voltage Too High

ECU 000613.04 - Driver Of Fuel Pressure Control Valves, Short To Ground

ECU 000613.31 - Driver Of Fuel Pressure Control Valves Faulty

ECU 000629.02 - Control Software, Internal Error

ECU 000629.12 - Control Software, Internal Fault

ECU 000629.13 - Control Software, Internal Fault

ECU 000629.14 - Control Software, Internal Error

ECU 000629.31 - Control Software, Internal Error

ECU 000636.02 - Camshaft Speed Signal Invalid

ECU 000636.05 - Camshaft Speed Sensor, Resistance Too High

ECU 000636.06 - Camshaft Speed Sensor, Resistance Too Low

ECU 000636.08 - Camshaft Speed Missing

ECU 000636.10 - Camshaft Speed Signal Rate of Change Abnormal

ECU 000637.02 - Crankshaft Speed Invalid

ECU 000637.05 - Crankshaft Speed Sensor, Resistance Too High

ECU 000637.06 - Crankshaft Speed Sensor, Resistance Too Low

ECU 000637.07 - Camshaft Speed and Crankshaft Speed Signals Out of Sync

ECU 000637.08 - Crankshaft Speed Missing

ECU 000637.10 - Crankshaft Speed Signal Rate of Change Abnormal

ECU 000641.00 - VGT Actuator Temperature Extremely High

ECU 000641.05 - Driver of VGT Actuator, Resistance Too High

ECU 000641.06 - Driver of VGT Actuator, Resistance Too Low

ECU 000641.07 - VGT Actuator Learned Value Error

ECU 000641.09 - CAN Bus Message Cannot Be Received, Information from VGT Actuator

ECU 000641.12 - VGT Actuator Internal Fault

ECU 000641.13 - VGT Actuator, Calibration Error

ECU 000641.16 - VGT Actuator Temperature Slightly High

ECU 000641.31 - VGT Actuator Supply Voltage Fault

ECU 000647.05 - Proportional Solenoid Valve for Charge Air Cooler Hydraulic Motor, Current Too Low

ECU 000647.06 - Proportional Solenoid Valve for Charge Air Cooler Hydraulic Motor, Current Too High

ECU 000651.02 - Part Number of Injector 1 Invalid

ECU 000651.05 - Injection Valve 1, Resistance Too High

ECU 000651.06 - Injection Valve 1, Resistance Too Low

ECU 000651.13 - Injection Valve 1, Calibration Error

ECU 000651.18 - Injection Valve 1 Fault

ECU 000652.02 - Part Number of Injector 2 Invalid

ECU 000652.05 - Injection Valve 2, Resistance Too High

ECU 000652.06 - Injection Valve 2, Resistance Too Low

ECU 000652.13 - Injection Valve 2, Calibration Error

ECU 000652.18 - Injection Valve 2 Fault

ECU 000653.02 - Part Number of Injector 3 Invalid

ECU 000653.05 - Injection Valve 3, Resistance Too High

ECU 000653.06 - Injection Valve 3, Resistance Too Low

ECU 000653.13 - Injection Valve 3, Calibration Error

ECU 000653.18 - Injection Valve 3 Fault

ECU 000654.02 - Part Number of Injector 4 Invalid

ECU 000654.05 - Injection Valve 4, Resistance Too High

ECU 000654.06 - Injection Valve 4, Resistance Too Low

ECU 000654.13 - Injection Valve 4, Calibration Error

ECU 000654.18 - Injection Valve 4 Fault

ECU 000655.02 - Part Number of Injector 5 Invalid

ECU 000655.05 - Injection Valve 5, Resistance Too High

ECU 000655.06 - Injection Valve 5, Resistance Too Low

ECU 000655.13 - Injection Valve 5, Calibration Error

ECU 000655.18 - Injection Valve 5 Fault

ECU 000656.02 - Part Number of Injector 6 Invalid

ECU 000656.05 - Injection Valve 6, Resistance Too High

ECU 000656.06 - Injection Valve 6, Resistance Too Low

ECU 000656.13 - Injection Valve 6, Calibration Error

ECU 000656.18 - Injection Valve 6 Fault

ECU 000676.05 - Relay for Electric Starting Aid, Current Too Low

ECU 000676.06 - Relay for Electric Starting Aid, Current Too High

ECU 000676.14 - Cold Start Aid Signal Received When Not Expected

ECU 000676.31 - Cold Start Aid Relay Signal Not Received When Expected

ECU 000695.19 - Unapproved Engine Speed Request

ECU 000970.31 - Engine Start Fault

ECU 001075.02 - Fuel Pump Fault

ECU 001075.04 - Fuel Pump, Voltage Too Low

ECU 001075.05 - Fuel Pump, Resistance Too High

ECU 001075.06 - Fuel Pump, Resistance Too Low

ECU 001075.09 - CAN Bus Message Cannot Be Received, Information from Fuel Pump

ECU 001075.12 - Fuel Pump Fault

ECU 001075.15 - Fuel Pump, Temperature Too High

ECU 001110.31 - Engine Protection Shutdown

ECU 001136.00 - Engine Control Unit, Temperature Too High

ECU 001136.02 - Engine Control Unit, Temperature Invalid

ECU 001136.16 - Engine Control Unit, Temperature Moderately High

ECU 001172.12 - Intake Air Temperature Fault

ECU 001176.07 - Intake Air Pressure Mismatch

ECU 001176.12 - Intake Air Pressure Fault

ECU 001180.00 - Calculated VGT Turbine Inlet Temperature Extremely High

ECU 001180.16 - Calculated VGT Turbine Inlet Temperature Moderately High

ECU 001209.03 - Exhaust Manifold Pressure Signal Out of Range High

ECU 001209.04 - Exhaust Manifold Pressure Signal Out of Range Low

ECU 001209.07 - Exhaust Manifold Pressure Mismatch

ECU 001321.05 - Engine Starter Solenoid Lockout Relay Circuit Has High Resistance

ECU 001321.06 - Engine Starter Solenoid Lockout Relay Circuit Has Low Resistance

ECU 001321.16 - ECU has Detected that the Starter has been Engaged Too Long

ECU 001322.31 - Engine Misfires Detected

ECU 001347.05 - Fuel Pressure Control Valve 1, Resistance Too High

ECU 001347.06 - Fuel Pressure Control Valve 1, Resistance Too Low

ECU 001347.07 - Control Valve 1 Fuel Pressure Deviation

ECU 001348.05 - Fuel Pressure Control Valve 2, Resistance Too High

ECU 001348.06 - Fuel Pressure Control Valve 2, Resistance Too Low

ECU 001351.05 - Compressor Clutch for Trailer Air Brakes, Current Too Low

ECU 001351.06 - Compressor Clutch for Trailer Air Brakes, Current Too High

ECU 001550.05 - A/C Compressor Clutch, Current Too Low

ECU 001550.06 - A/C Compressor Clutch, Current Too High

ECU 001569.31 - Engine in Derate Condition

ECU 001639.01 - Viscous Fan Drive (Electrical), Speed Not Present

ECU 001639.16 - Viscous Fan Drive (Electrical), Speed Moderately High

ECU 001639.18 - Viscous Fan Drive (Electrical), Speed Low

ECU 001761.01 - DEF Tank Empty

ECU 001761.03 - DEF Tank Fluid Level Sensor, Voltage Too High

ECU 001761.04 - DEF Tank Fluid Level Sensor, Voltage Too Low

ECU 001761.17 - DEF Tank Fluid Level Moderately Low

ECU 001761.18 - DEF Tank Fluid Level Low

ECU 002003.09 - Incorrect CAN Bus Message, Information from PTA Control Software

ECU 002003.14 - VIN Information, Mismatch

ECU 002003.19 - VIN Information, Mismatch

ECU 002005.09 - Incorrect CAN Bus Message, Information from TIN/TIA Control Software

ECU 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

ECU 002006.13 - VIN Information, Mismatch

ECU 002006.14 - VIN Information, Mismatch

ECU 002006.19 - VIN Information, Mismatch

ECU 002007.09 - Incorrect CAN Bus Message, Information from RPT Control Software

ECU 002025.09 - Incorrect CAN Bus Message, Information from ATC/ETC Control Software

ECU 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

ECU 002071.14 - VIN Information, Mismatch

ECU 002071.19 - VIN Information, Mismatch

ECU 002629.03 - Compressor Outlet Temperature Signal Out Of Range High

ECU 002629.04 - Compressor Outlet Temperature Signal Out Of Range Low

ECU 002630.00 - Charge Air Cooler Outlet Temperature Signal Extremely High

ECU 002630.03 - Charge Air Cooler Outlet Temperature Signal Out Of Range High

ECU 002630.04 - Charge Air Cooler Outlet Temperature Signal Out Of Range Low

ECU 002630.15 - Charge Air Cooler Outlet Temperature Signal Slightly High

ECU 002630.16 - Charge Air Cooler Outlet Temperature Signal Moderately High

ECU 002659.01 - NOx Based EGR Flow Correction Extremely Low

ECU 002659.02 - EGR Flow Signal Invalid

ECU 002659.03 - EGR Flow Signal Out of Range High

ECU 002659.04 - EGR Flow Signal Out of Range Low

ECU 002659.14 - EGR Flow Signal Fault

ECU 002659.15 - EGR Flow Signal Moderately High

ECU 002659.17 - EGR Flow Signal Moderately Low

ECU 002659.18 - NOx Based EGR Flow Correction Moderately Low

ECU 002790.16 - Fixed Turbocharger Compressor Outlet Temperature Moderately High

ECU 002791.05 - EGR Valve Actuator, Current Too Low

ECU 002791.06 - EGR Valve Actuator, Current Too High

ECU 002791.07 - EGR Valve Actuator Fault

ECU 002791.13 - EGR Valve Actuator, Calibration Error

ECU 002795.03 - VGT Actuator, Voltage Too High

ECU 002795.04 - VGT Actuator, Voltage Too Low

ECU 002795.07 - VGT Actuator Fault

ECU 002795.10 - Calculated Rate of Change of VGT Actuator Abnormal

ECU 002795.13 - VGT Actuator, Calibration Error

ECU 002795.31 - VGT Actuator Fault

ECU 002797.03 - Injection Valve Supply Voltage 1, Voltage Too High

ECU 002797.05 - Injection Valve Supply Voltage 1, Resistance Too High

ECU 002797.06 - Injection Valve Supply Voltage 1, Resistance Too Low

ECU 002798.03 - Injection Valve Supply Voltage 2, Voltage Too High

ECU 002798.05 - Injection Valve Supply Voltage 2, Resistance Too High

ECU 002798.06 - Injection Valve Supply Voltage 2, Resistance Too Low

ECU 003031.03 - DEF Tank Fluid Temperature Signal Out of Range High

ECU 003031.04 - DEF Tank Fluid Temperature Sensor, Voltage Too Low

ECU 003031.12 - DEF Tank Fluid Tank Temperature Error

ECU 003216.09 - CAN Bus Message Cannot Be Received, Information from Aftertreatment Inlet NOx Sensor

ECU 003216.12 - Aftertreatment Inlet NOx Sensor Faulty

ECU 003216.14 - Aftertreatment Inlet NOx Sensor Faulty

ECU 003226.09 - CAN Bus Message Cannot Be Received, Information from Aftertreatment Outlet NOx Sensor

ECU 003226.12 - Aftertreatment Outlet NOx Sensor Faulty

ECU 003226.14 - Aftertreatment Outlet NOx Sensor Faulty

ECU 003246.00 - DPF Outlet Temperature Extremely High

ECU 003246.12 - DPF Outlet Temperature Fault

ECU 003251.00 - DPF Differential Pressure Sensor Fault

ECU 003251.02 - DPF Differential Pressure Signal Invalid

ECU 003251.03 - DPF Differential Pressure Signal Out of Range High

ECU 003251.04 - DPF Differential Pressure Signal Out of Range Low

ECU 003251.07 - DPF Differential Pressure Sensor Fault

ECU 003353.31 - Alternator, Fault

ECU 003361.03 - DEF Dosing Injector Signal Out of Range High

ECU 003361.04 - DEF Dosing Injector Signal Out of Range Low

ECU 003361.05 - DEF Dosing Injector Circuit Has High Resistance

ECU 003361.06 - DEF Dosing Injector Circuit Has Low Resistance

ECU 003361.07 - DEF Dosing Injector Position Invalid

ECU 003361.31 - DEF Dosing Injector Active without Injection

ECU 003464.05 - Air Throttle Actuator, Resistance Too High

ECU 003464.06 - Air Throttle Actuator, Resistance Too Low

ECU 003464.07 - Air Throttle Actuator Fault

ECU 003464.13 - Air Throttle Actuator Calibration Error

ECU 003465.05 - Air Throttle Actuator, Resistance Too High

ECU 003465.06 - Air Throttle Actuator, Resistance Too Low

ECU 003465.07 - Air Throttle Actuator Fault

ECU 003465.13 - Air Throttle Actuator Calibration Error

ECU 003473.03 - Actuator Signal Out of Range High

ECU 003473.04 - Actuator Signal Out of Range Low

ECU 003473.07 - Air Throttle Signal, Fault

ECU 003509.03 - Sensor Supply Voltage 1 Out of Range High

ECU 003509.04 - Sensor Supply Voltage 1 Out of Range Low

ECU 003510.03 - Sensor Supply Voltage 2 Out of Range High

ECU 003510.04 - Sensor Supply Voltage 2 Out of Range Low

ECU 003511.03 - Sensor Supply Voltage 3 Out of Range High

ECU 003511.04 - Sensor Supply Voltage 3 Out of Range Low

ECU 003512.03 - Sensor Supply Voltage 4 Out of Range High

ECU 003512.04 - Sensor Supply Voltage 4 Out of Range Low

ECU 003513.03 - Sensor Supply Voltage 5 Out of Range High

ECU 003513.04 - Sensor Supply Voltage 5 Out of Range Low

ECU 003514.03 - Sensor Supply Voltage 6 Out of Range High

ECU 003514.04 - Sensor Supply Voltage 6 Out of Range Low

ECU 003516.01 - Aftertreatment DEF Concentration Extremely Low

ECU 003516.07 - Aftertreatment DEF Concentration Sensor Obstructed

ECU 003516.09 - Aftertreatment DEF Concentration Sensor Loss of Communication

ECU 003516.12 - Aftertreatment DEF Concentration Sensor Error

ECU 003516.14 - Aftertreatment DEF Contaminated

ECU 003516.16 - Aftertreatment DEF Concentration Moderately High

ECU 003517.07 - DEF Tank Fluid Level Sensor Obstructed

ECU 003517.12 - DEF Tank Fluid Level Error

ECU 003711.14 - Diesel Particulate Filter Active Regeneration Inhibited Due to Low Exhaust Gas Temperature

ECU 003711.31 - Diesel Particulate Filter Active Regeneration Inhibited Due to Low Exhaust Gas Temperature

ECU 003719.00 - Calculated Soot Level Extremely High

ECU 003719.10 - Calculated Soot Load Rate of Change Abnormal

ECU 003719.13 - Excessive DPF Recovery Attempts

ECU 003719.14 - Calculated Soot Level Extremely High

ECU 003719.15 - Calculated Soot Level Slightly High

ECU 003719.16 - Calculated Soot Level Moderately High

ECU 003720.15 - Calculated Ash Level Slightly High

ECU 003720.16 - Calculated Ash Level Moderately High

ECU 003936.00 - Calculated Unintended Combustibles in DPF Extremely High

ECU 003936.15 - Calculated Unintended Combustibles in DPF Slightly High

ECU 003936.16 - Calculated Unintended Combustible In DPF Moderately High

ECU 004334.00 - DEF Dosing Unit Pressure Extremely High

ECU 004334.01 - DEF Dosing Unit Pressure Extremely Low

ECU 004334.03 - DEF Dosing Unit Signal Out of Range High

ECU 004334.04 - DEF Dosing Unit Signal Out of Range Low

ECU 004334.11 - DEF Dosing Unit Pressure Signal Fault

ECU 004334.16 - DEF Dosing Unit Pressure Moderately High

ECU 004334.18 - DEF Dosing Unit Pressure Moderately Low

ECU 004334.31 - DEF Dosing Unit Pressure Fault

ECU 004341.05 - DEF Dosing Unit Pressure Line Heater, Resistance Too High

ECU 004341.06 - DEF Dosing Unit Pressure Line Heater, Resistance Too Low

ECU 004343.05 - DEF Dosing Unit Return Line Heater, Resistance Too High

ECU 004343.06 - DEF Dosing Unit Return Line Heater, Resistance Too Low

ECU 004345.05 - DEF Dosing Unit Supply Line Heater, Resistance Too High

ECU 004345.06 - DEF Dosing Unit Supply Line Heater, Resistance Too Low

ECU 004360.07 - SCR Inlet Temperature Fault

ECU 004360.12 - SCR Inlet Temperature Faulty

ECU 004363.12 - SCR Outlet Temperature Faulty

ECU 004364.01 - Catalytic Converter Efficiency of SCR System Extremely Low

ECU 004364.17 - Catalytic Converter Efficiency of SCR System Slightly Low

ECU 004364.18 - Catalytic Converter Efficiency of SCR System Moderately Low

ECU 004366.05 - DEF Tank Heater Coolant Valve, Resistance Too High

ECU 004366.06 - DEF Tank Heater Coolant Valve, Resistance Too Low

ECU 004366.16 - DEF Tank Heater Coolant Control Valve is Stuck Open

ECU 004366.18 - DEF Tank Heater Coolant Control Valve is Stuck Closed

ECU 004376.05 - DEF Dosing Unit Reversing Valve, Resistance Too High

ECU 004376.06 - DEF Dosing Unit Reversing Valve, Resistance Too Low

ECU 004376.14 - DEF Dosing System Powerdown Fault

ECU 004490.12 - Intake Air Humidity Fault

ECU 004765.00 - DOC Inlet Temperature Extremely High

ECU 004765.12 - DOC Inlet Temperature Fault

ECU 004766.12 - DOC Outlet Temperature Fault

ECU 004766.15 - DOC Outlet Temperature Slightly High

ECU 004766.16 - DOC Outlet Temperature Moderately High

ECU 004766.17 - DOC Outlet Temperature Slightly Low

ECU 004766.18 - DOC Outlet Temperature Moderately Low

ECU 004795.13 - Exhaust Filter Calibration Fault

ECU 004795.31 - DPF Missing

ECU 005018.00 - Calculated Unintended Combustibles in DOC Extremely High

ECU 005018.15 - Calculated Unintended Combustibles In DOC Slightly High

ECU 005018.16 - Calculated Unintended Combustibles in DOC Moderately High

ECU 005125.03 - Sensor Supply Voltage 7 Out of Range High

ECU 005125.04 - Sensor Supply Voltage 7 Out of Range Low

ECU 005126.03 - Sensor Supply Voltage 8 Out of Range High

ECU 005126.04 - Sensor Supply Voltage 8 Out of Range Low

ECU 005127.03 - Sensor Supply Voltage 9 Out of Range High

ECU 005127.04 - Sensor Supply Voltage 9 Out of Range Low

ECU 005128.05 - Sensor Supply Voltage 10, Resistance Too High

ECU 005128.06 - Sensor Supply Voltage 10, Resistance Too Low

ECU 005246.00 - SCR Operator Stage #3 Derate Notification

ECU 005246.13 - SCR Operator Derate Notification Active

ECU 005246.14 - SCR Operator Stage #4 Derate Notification

ECU 005246.15 - SCR Operator Stage #1 Derate Notification

ECU 005246.16 - SCR Operator Stage #2 Derate Notification

ECU 005246.31 - SCR Operator Final Derate Notification

ECU 005298.01 - Output of Diesel Oxidation Catalyst Extremely Low

ECU 005298.18 - Efficiency of Diesel Oxidation Catalyst Moderately Low

ECU 005435.06 - Low Resistance in Pump Circuit of DEF Dosing Unit

ECU 005435.09 - CAN Bus Message Cannot Be Received, Information from DEF Dosing Unit

ECU 005435.11 - Fault in the Circuit of DEF Dosing Unit Pump

ECU 005435.14 - DEF Dosing Unit Pump Motor Fault

ECU 005435.31 - Fault in the DEF Dosing Unit Pump

ECU 005571.05 - High Resistance in Circuit for Fuel Rail Pressure Surge Relief Valve

ECU 005571.06 - Low Resistance in Circuit for Fuel Rail Pressure Surge Relief Valve

ECU 005743.09 - Data Cannot Be Received, Information from SCR Temperature Module

ECU 005745.05 - DEF Dosing Unit Heater, Resistance Too High

ECU 005745.06 - DEF Dosing Unit Heater, Resistance Too Low

ECU 005745.18 - DEF Dosing Unit Heater, Temperature Moderately Low

ECU 005745.31 - DEF Dosing Unit Heater, Temperature Faulty

ECU 520629.31 - Control Software, Internal Error

ECU 521192.11 - Engine Shutdown, Time-Out

ECU 521214.09 - Incorrect CAN Bus Message, Information from EIC Control Software

ECU 521214.14 - VIN Information, Mismatch

ECU 521225.31 - Crankshaft Speed Signal Invalid

ECU 522494.09 - CAN Bus Message Cannot Be Received, Information from Intake Air Sensor

ECU 522495.09 - CAN Bus Message Cannot Be Received, Information from Exhaust Filter Temperature Module

ECU 523653.01 - Supply Voltage (BAT) Too Low

ECU 523653.14 - Battery Disconnected

ECU 523665.01 - Supply Voltage (BAT) Too Low

ECU 523666.01 - Supply Voltage (BAT) Too Low

Group EIC: EIC Control Software

EIC 000166.14 - Engine Power Limited

EIC 000628.02 - Control Software, Internal Error

EIC 000629.12 - Control Software, Internal Error

EIC 000630.13 - Control Software, Internal Error

EIC 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

EIC 002007.09 - Incorrect CAN Bus Message, Information from RPT Control Software

EIC 002029.09 - Incorrect CAN Bus Message, Information from Immobilizer Control Unit

EIC 002029.12 - Incorrect Information from Immobilizer Control Unit

EIC 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

EIC 002185.09 - Incorrect CAN Bus Message, Information from ICA Control Software

EIC 003695.14 - Automatic Exhaust Filter Cleaning Deactivated

EIC 003719.15 - Automatic Exhaust Filter Cleaning not Completed

EIC 003719.16 - Calculated Soot Level Extremely High

EIC 521192.11 - VIN Information, Mismatch

EIC 521192.12 - VIN Information, Mismatch

EIC 521192.13 - VIN Information, Mismatch

EIC 521214.02 - Immobilizer, Fault

EIC 521214.11 - Immobilizer, Fault

EIC 521214.12 - Immobilizer, Fault

EIC 521214.31 - Memory Information Invalid

EIC 521321.09 - Incorrect CAN Bus Message, Information from Immobilizer

EIC 521321.12 - Immobilizer key unknown

EIC 521322.07 - Faulty immobilizer antenna

EIC 521322.31 - Immobilizer key chip fault

EIC 523702.14 - VIN Information, Mismatch

EIC 523702.31 - Memory Information Invalid

Group ETC: ETC Control Software

ETC 000158.03 - ETC Control Software, Supply Voltage Too High

ETC 000158.04 - ETC Control Software, Supply Voltage Too Low

ETC 000170.03 - Sensor for Inside Air Temperature, Voltage Too High

ETC 000170.04 - Sensor for Inside Air Temperature, Voltage Too Low

ETC 000628.12 - Control Software, Internal Fault

ETC 000630.02 - Control Software, Internal Fault

ETC 000639.14 - Vehicle CAN Bus, Very High Error Rate

ETC 000871.03 - Refrigerant Pressure Sensor, Voltage Too High

ETC 000871.04 - Refrigerant Pressure Sensor, Voltage Too Low

ETC 000871.13 - Sensor for Refrigerant Pressure, Refrigerant Pressure Out of Range Low

ETC 000871.18 - Refrigerant Pressure Sensor, Malfunction

ETC 000876.03 - Compressor Clutch Switched On, Voltage Too High

ETC 000876.04 - Compressor Clutch Switched On, Voltage Too Low

ETC 000876.10 - Compressor Clutch, Malfunction

ETC 000876.14 - Compressor Clutch, Overload Protection

ETC 000923.03 - Circulation Blower Motor On, Voltage Too High

ETC 000923.04 - Circulation Blower Motor On, Voltage Too Low

ETC 000923.12 - Circulation Blower Motor Internal Fault

ETC 001546.03 - Heater Valve (Potentiometer), Voltage Too High

ETC 001546.04 - Heater Valve (Potentiometer), Voltage Too Low

ETC 001547.03 - Sensor for Evaporator Core Temperature, Voltage Too High

ETC 001547.04 - Sensor for Evaporator Core Temperature, Voltage Too Low

ETC 001548.03 - Outlet Air Temperature Sensor, Voltage Too High

ETC 001548.04 - Outlet Air Temperature Sensor, Voltage Too Low

ETC 001549.03 - Heater Valve (Actuator), Voltage Too High

ETC 001549.04 - Heater Valve (Actuator), Voltage Too Low

ETC 001549.07 - Heater Valve, Fault

ETC 001549.13 - Heater Valve, Not Calibrated

ETC 002000.09 - Incorrect CAN BUS Message, Coolant Temperature from ECU Control Unit

ETC 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

ETC 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

ETC 003509.03 - 5-Volt Supply Voltage, Voltage Too High

ETC 003509.04 - 5-Volt Supply Voltage, Voltage Too Low

ETC 003509.06 - 5-V Supply Voltage, Current Too High

ETC 520870.02 - Control Software, Internal Error

ETC 520871.02 - Control Software, Internal Error

ETC 520872.02 - Control Software, Internal Error

ETC 523848.03 - Actuator for Air Distribution (Potentiometer), Voltage Too High

ETC 523848.04 - Actuator for Air Distribution (Potentiometer), Voltage Too Low

ETC 523848.05 - Actuator for Air Distribution, Current Too Low

ETC 523848.06 - Actuator for Air Distribution, Current Too High

ETC 523848.07 - Actuator for Air Distribution, Fault

ETC 523848.13 - Actuator for Air Distribution, Not Calibrated

ETC 524202.03 - Sensor for Ambient Air Temperature (Rear), Voltage Too High

ETC 524202.04 - Sensor for Ambient Air Temperature (Rear), Voltage Too Low

ETC 524203.03 - Sensor for Ambient Air Temperature (Front), Voltage Too High

ETC 524203.04 - Sensor for Ambient Air Temperature (Front), Voltage Too Low

ETC 524219.02 - Defog Sensor, Frequency Out of Valid Range

ETC 524219.03 - Defog Sensor, Voltage Too High

ETC 524219.04 - Defog Sensor, Voltage Too Low

Group FCC: FCC Control Software

FCC 000158.00 - Instrument Unit, Supply Voltage (ELX) Too High

FCC 000158.01 - Instrument Unit, Supply Voltage (ELX) Too Low

FCC 000158.17 - Instrument Unit, Supply Voltage (ELX) Too Low

FCC 000158.18 - Instrument Unit, Supply Voltage (ELX) Too Low

FCC 000168.18 - Instrument Unit, Supply Voltage (BAT) Too Low

FCC 000628.02 - Control Software, Internal Error

FCC 000629.12 - Control Software, Internal Error

FCC 000630.02 - Control Software, Internal Error

FCC 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

FCC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

FCC 002005.09 - Incorrect CAN Bus Message, Information from TIA, TID or TIQ Control Software

FCC 002825.13 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

FCC 002825.31 - Reverse Drive Lever, Fault

FCC 002826.31 - Reverse Drive Lever, Fault

FCC 002828.31 - Reverse drive lever, power-zero switch, move switch and either the forward or reverse switch are activated simultaneously for too long a period.

FCC 002829.31 - Reverse drive lever, park lock switch, and neutral switch or power zero switch are activated simultaneously for too long a period

FCC 002865.02 - Switch for windshield and rear window wipers, Malfunction at rear window

FCC 002872.02 - Light Switch, Fault

FCC 002876.02 - Turn-Signal Lever, Fault

FCC 003598.06 - Wake-Up Signal, Current Too High

FCC 522122.31 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

FCC 522123.31 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

FCC 522124.31 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

FCC 522125.31 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

FCC 522358.31 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

FCC 522763.31 - Reverse Drive Lever, Fault

FCC 524020.31 - INFORMATION FOR OPERATOR: Reverse Drive Lever Not in Neutral Position During Start-Up

FCC 524022.31 - Reverse Drive Lever, Fault

FCC 524264.02 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

Group GPM: GPM Control Software

GPM 000168.04 - Supply Voltage (BAT) Too Low

GPM 000191.00 - INFORMATION FOR OPERATOR: Reduce Travel Speed Using Brakes

GPM 000628.02 - Control Software Internal Fault

GPM 000630.02 - Control Software Internal Fault

GPM 521926.12 - INFORMATION FOR OPERATOR: Range C Jumped Out

GPM 521927.12 - INFORMATION FOR OPERATOR: Range B Jumped Out

GPM 521928.05 - Gear 8 Solenoid Current Too Low

GPM 521928.06 - Gear 8 Solenoid Current Too High

GPM 521928.07 - Gear 8 Fault

GPM 521928.12 - INFORMATION FOR OPERATOR: Gear 8 Jumped Out

GPM 521928.17 - Time-Out When Engaging Gear 8

GPM 521928.18 - INFORMATION FOR OPERATOR: Gear 8 Cannot Be Engaged

GPM 521929.05 - Gear 7 Solenoid Current Too Low

GPM 521929.06 - Gear 7 Solenoid Current Too High

GPM 521929.07 - Gear 7 Fault

GPM 521929.12 - INFORMATION FOR OPERATOR: Gear 7 Jumped Out

GPM 521929.17 - Time-Out When Engaging Gear 7

GPM 521929.18 - INFORMATION FOR OPERATOR: Gear 7 Cannot Be Engaged

GPM 521930.05 - Gear 6 Solenoid Current Too Low

GPM 521930.06 - Gear 6 Solenoid Current Too High

GPM 521930.07 - Gear 6 Fault

GPM 521930.12 - INFORMATION FOR OPERATOR: Gear 6 Jumped Out

GPM 521930.17 - Time-Out When Engaging Gear 6

GPM 521930.18 - INFORMATION FOR OPERATOR: Gear 6 Cannot Be Engaged

GPM 521931.05 - Gear 5 Solenoid Current Too Low

GPM 521931.06 - Gear 5 Solenoid Current Too High

GPM 521931.07 - Gear 5 Fault

GPM 521931.12 - INFORMATION FOR OPERATOR: Gear 5 Jumped Out

GPM 521931.17 - Time-Out When Engaging Gear 5

GPM 521931.18 - INFORMATION FOR OPERATOR: Gear 5 Cannot Be Engaged

GPM 521933.05 - Gear 4 Solenoid Current Too Low

GPM 521933.06 - Gear 4 Solenoid Current Too High

GPM 521933.07 - Gear 4 Fault

GPM 521933.12 - INFORMATION FOR OPERATOR: Gear 4 Jumped Out

GPM 521933.17 - Time-Out When Engaging Gear 4

GPM 521933.18 - INFORMATION FOR OPERATOR: Gear 4 Cannot Be Engaged

GPM 521935.12 - INFORMATION FOR OPERATOR: Range A Jumped Out

GPM 521991.06 - Control Unit for Gear Shifting, Current Too High

GPM 521991.12 - Control Unit for Gear Shifting, Temperature Too High

GPM 522089.05 - Gear 1 Solenoid Current Too Low

GPM 522089.06 - Gear 1 Solenoid Current Too High

GPM 522089.07 - Gear 1 Fault

GPM 522089.12 - INFORMATION FOR OPERATOR: Gear 1 Jumped Out

GPM 522089.17 - Time-Out When Engaging Gear 1

GPM 522089.18 - INFORMATION FOR OPERATOR: Gear 1 Cannot Be Engaged

GPM 522090.05 - Gear 2 Solenoid Current Too Low

GPM 522090.06 - Gear 2 Solenoid Current Too High

GPM 522090.07 - Gear 2 Fault

GPM 522090.12 - INFORMATION FOR OPERATOR: Gear 2 Jumped Out

GPM 522090.17 - Time-Out When Engaging Gear 2

GPM 522090.18 - INFORMATION FOR OPERATOR: Gear 2 Cannot Be Engaged

GPM 522092.05 - Gear 3 Solenoid Current Too Low

GPM 522092.06 - Gear 3 Solenoid Current Too High

GPM 522092.07 - Gear 3 Fault

GPM 522092.12 - INFORMATION FOR OPERATOR: Gear 3 Jumped Out

GPM 522092.17 - Time-Out When Engaging Gear 3

GPM 522092.18 - INFORMATION FOR OPERATOR: Gear 3 Cannot Be Engaged

GPM 522191.07 - Side Shaft 2 Fault

GPM 522192.07 - Side Shaft 1 Fault

GPM 524277.00 - INFORMATION FOR OPERATOR: Reduce Engine Speed To Allow Downshifting

Group HCC: HCC Control Software

HCC 000158.03 - Control Software, Supply Voltage (ELX) Too High

HCC 000158.04 - Control Software, Supply Voltage (ELX) Too Low

HCC 000168.03 - Control Software, Supply Voltage (BAT) Too High

HCC 000168.04 - Control Software, Supply Voltage (BAT) Too Low

HCC 000190.02 - INFORMATION FOR OPERATOR: Engine Speed Too Low During Calibration

HCC 000237.02 - VIN Information, Mismatch

HCC 000237.12 - VIN Information, High Error Rate

HCC 000237.14 - VIN Information, System Disabled

HCC 000231.31 - VIN Information, Incorrect

HCC 000444.03 - Control Software, Supply Voltage (BAT on Pin J4) Too High

HCC 000444.04 - Control Software, Supply Voltage (BAT) Too Low

HCC 000444.06 - Control Software, Current Too Low

HCC 000628.02 - Control Software, Internal Error

HCC 000629.12 - Control Software, Internal Error

HCC 000630.13 - Control Software Not or Incorrectly Calibrated

HCC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

HCC 001638.02 - INFORMATION FOR OPERATOR: Transmission Oil Temperature Too Low During Calibration

HCC 001673.02 - Hitch Position Sensor, Error

HCC 001873.02 - Hitch Position Sensor Out of Range

HCC 001873.03 - Hitch Position Sensor, Voltage Too High

HCC 001873.04 - Hitch Position Sensor, Voltage Too Low

HCC 001873.11 - Hitch Position Sensor, Measuring Range Too Small

HCC 001873.13 - Hitch Position Sensor Not or Incorrectly Calibrated

HCC 001873.31 - Hitch Position Sensor, Fault

HCC 001881.03 - Draft Sensor, Voltage Too High

HCC 001881.04 - Draft Sensor, Voltage Too Low

HCC 001881.13 - Draft Sensor Out of Range

HCC 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

HCC 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

HCC 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

HCC 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

HCC 002149.09 - Incorrect CAN Bus Message, Information from VLC Control Software

HCC 002152.09 - Incorrect CAN Bus Message, Information from Hitch Control Valve

HCC 002602.18 - INFORMATION FOR OPERATOR: Low Transmission Oil Level

HCC 003509.03 - 5-Volt Supply Voltage, Voltage Too High

HCC 003509.04 - 5 V Supply Voltage, Voltage Too Low

HCC 003509.06 - 5-Volt Supply Voltage, Current Too High

HCC 520285.02 - Hitch Lock Switch, Error

HCC 520285.09 - Incorrect LIN Bus Message from Hitch Lock Switch

HCC 520286.02 - Quick Raise/Lower Switch for Lower End Point, Error

HCC 520286.09 - Incorrect LIN Bus Message from Quick Raise/Lower Switch for Lower End Point

HCC 520870.02 - Control Software, Internal Error

HCC 520871.02 - Control Software, Internal Error

HCC 521000.02 - CAN Bus Message Cannot Be Received, Information from UIC Control Software

HCC 521000.09 - CAN Bus Message Cannot Be Received, Information from UIC Control Software

HCC 521000.31 - Switch for Hitch Remote Control (Right/Left), Fault

HCC 521001.02 - HCC Calibration Fault while Raising

HCC 521001.05 - Rear Hitch Control Valve (Raising), Current Too Low

HCC 521001.06 - Rear Hitch Control Valve (Raising), Current Too High

HCC 521001.07 - Rear Hitch Control Valve (Raising), Fault

HCC 521001.11 - Rear Hitch Control Valve (Raising), Fault

HCC 521001.13 - Calibration Fault at Rear Hitch Control Valve while Raising

HCC 521002.02 - HCC Calibration Fault while Lowering

HCC 521002.03 - Rear Hitch Control Valve (Lowering), Voltage Too High

HCC 521002.04 - Rear Hitch Control Valve (Lowering), Voltage Too Low

HCC 521002.05 - Rear Hitch Control Valve (Lowering), Current Too Low

HCC 521002.06 - Rear Hitch Control Valve (Lowering), Current Too High

HCC 521002.07 - Rear Hitch Control Valve (Lowering), Fault

HCC 521002.11 - Rear Hitch Control Valve (Lowering), Fault

HCC 521002.13 - Calibration Fault at Rear Hitch Control Valve while Lowering

HCC 521408.02 - Rear Hitch Lower Switch, Fault

HCC 521408.09 - Incorrect CAN Bus Message: Rear Hitch Lower Switch

HCC 521421.09 - Rear Hitch Encoder Lower Message Missing

HCC 521421.19 - Incorrect CAN Bus Message: Encoder for Lowering Rear Hitch

HCC 521421.31 - INFORMATION FOR OPERATOR: Rear Hitch Encoder Lower Data Fault

HCC 521422.09 - Rear Hitch Encoder Raise Message Missing

HCC 521422.19 - Incorrect CAN Bus Message: Rear Hitch Encoder Raise

HCC 521422.31 - INFORMATION FOR OPERATOR: Rear Hitch Encoder Raise Data Fault

HCC 521475.09 - Message (Increase Value) for Draft Response / Depth Control of Rear Hitch Missing

HCC 521475.19 - Incorrect CAN Bus Message: Rear Hitch Control Knob for Draft Response / Depth Control, Increase Value

HCC 521475.31 - INFORMATION FOR OPERATOR: Data Error at Rear Hitch Control Knob for Draft Response / Depth Control (Increase Value)

HCC 521476.09 - Rear Hitch Height Limit Increase Message Missing

HCC 521476.19 - Incorrect CAN Bus Message: Rear Hitch Height Limit Encoder Increase

HCC 521476.31 - INFORMATION FOR OPERATOR: Rear Hitch Height Limit Encoder Increase Data Fault

HCC 521477.09 - Message (Decrease Value) for Draft Response / Depth Control of Rear Hitch Missing

HCC 521477.19 - Incorrect CAN Bus Message: Rear Hitch Control Knob for Draft Response / Depth Control, Decrease Value

HCC 521477.31 - INFORMATION FOR OPERATOR: Data Error at Rear Hitch Control Knob for Draft Response / Depth Control (Decrease Value)

HCC 521478.09 - Rear Hitch Drop Rate Encoder Message (Decrease Value) Missing

HCC 521478.19 - Incorrect CAN Bus Message: Rear Hitch Drop Rate Encoder, Decrease Value

HCC 521478.31 - INFORMATION FOR OPERATOR: Data Error of Rear Hitch Control Knob for Decreasing Rate-of-Drop Value

HCC 521479.09 - Rear Hitch Height Limit Encoder Decrease Value Message Missing

HCC 521479.19 - Incorrect CAN Bus Message: Data Error of the Rear Hitch Control Knob for Decreasing Raise Limit

HCC 521479.31 - INFORMATION FOR OPERATOR: Data Error of Rear Hitch Control Knob for Decreasing Raise Limit

HCC 521480.09 - Rear Hitch Drop Rate Encoder Message (Increase Value) Missing

HCC 521480.19 - Incorrect CAN Bus Message: Rear Hitch Drop Rate Encoder, Decrease Value

HCC 521480.31 - INFORMATION FOR OPERATOR: Data Error of Rear Hitch Control Knob for Decreasing Rate-of-Drop Value

HCC 522390.09 - Incorrect CAN Bus Message, Information from Implement

HCC 522390.11 - Tractor-Implement Automation™, Fault

HCC 523652.02 - Control Unit Connected to Wrong Wiring Harness Connector

HCC 523701.05 - Stepper Motor for Hitch (Coil 1), Open Circuit

HCC 523701.06 - Stepper Motor for Hitch (Coil 1), Current Too High

HCC 523703.03 - Draft Sensor (Right), Voltage Too High

HCC 523703.04 - Draft Sensor (Right), Voltage Too Low

HCC 523703.13 - Draft Sensor (Right) Out of Range

HCC 523714.31 - Solenoid Valve for Draft Link Stabilizer (No-Float Position), Fault

HCC 523715.31 - Solenoid Valve for Draft Link Stabilizer (Float Position), Fault

HCC 523751.05 - Stepper Motor for Hitch (Coil 2), Open Circuit

HCC 523751.06 - Stepper Motor for Hitch (Coil 2), Current Too High

HCC 523775.19 - Activation Button of Multi-Function Lever, Fault

HCC 523775.31 - INFORMATION FOR OPERATOR: Activation Button of Multi-Function Lever, Fault

HCC 523788.02 - PIN Configuration for Optional Rear Hitch Functions has Changed

HCC 523788.14 - INFORMATION FOR OPERATOR: Rear Hitch Configuration has Changed

HCC 523832.03 - Rate-of-Drop Potentiometer, Voltage Too High

HCC 523832.04 - Rate-of-Drop Potentiometer, Voltage Too Low

HCC 523832.13 - Rate-of-Drop Potentiometer, Out of Range

HCC 523833.03 - Height-Limit Potentiometer, Voltage Too High

HCC 523833.04 - Height-Limit Potentiometer, Voltage Too Low

HCC 523833.13 - Height-Limit Potentiometer, Out of Range

HCC 523834.03 - Depth-Setting Potentiometer Voltage Too High

HCC 523834.04 - Depth-Setting Potentiometer Voltage Too Low

HCC 523834.09 - CAN Bus Message Cannot be Received, Information from AIC Control Software

HCC 523834.13 - Depth-Setting Potentiometer Not Calibrated

HCC 523834.19 - Depth-Setting Potentiometer, Fault

HCC 523834.31 - Depth-Setting Potentiometer, Fault

HCC 523842.03 - Potentiometer for Hitch Load/Depth Control, Voltage Too High

HCC 523842.04 - Potentiometer for Hitch Load/Depth Control, Voltage Too Low

HCC 523842.13 - Potentiometer for Hitch Load/Depth Control Not Calibrated

HCC 523843.02 - Quick Raise/Lower Switch and Switch for Remote Control of Rear Hitch, Fault

HCC 523843.09 - CAN Bus Message Cannot be Received, Information from AIC Control Software

HCC 523843.15 - Quick Raise/Lower Switch Not in Center Position

HCC 523843.19 - Quick Raise/Lower Switch, Fault

HCC 523843.31 - Quick Raise/Lower Switch, Fault

HCC 523910.02 - Control Software, Internal Fault

HCC 523950.13 - Rear Hitch Position Sensor, Not Calibrated

HCC 523952.31 - Rear Hitch Control Lever, Fault

HCC 524212.02 - Depth Control Regulator, Malfunction

HCC 524212.09 - Incorrect CAN Bus Message, Information from Depth Control Regulator from AIC Control Software

HCC 524212.15 - Depth Control Regulator is Out of Range

HCC 524212.19 - Incorrect CAN Bus Message, Information from Depth Control Regulator from AIC Control Software

HCC 524212.31 - Depth Control Regulator, Malfunction

HCC 524259.00 - Temperature of Rear Chassis Control Unit Extremely High

HCC 524259.16 - Temperature of Rear Chassis Control Unit High

Group HV1: HV1 control software

HV1 000158.03 - Supply Voltage too High

HV1 000158.04 - Supply Voltage too Low

HV1 000158.16 - Supply Voltage (ELX) Too High

HV1 000158.18 - Supply Voltage (ELX) Too Low

HV1 000628.02 - Control Software, Internal Error

HV1 002035.09 - Incorrect CAN Bus Message, Information from HCC Control Software

HV1 004084.07 - Control Valve of the Rear Hitch, Fault

HV1 004084.16 - Control Valve of Rear Hitch, Deflection Too Large

HV1 004084.18 - Control Valve of Rear Hitch, Deflection Too Small

HV1 004085.12 - Control Valve of the Rear Hitch, Internal Error

HV1 004085.07 - Neutral Position of Control Valve of Rear Hitch, Fault

HV1 520255.09 - Incorrect or Missing CAN Bus Message, Information from HCC Control Software

HV1 520255.19 - Missing CAN Bus Message, Information from HCC Control Software

HV1 520256.00 - Stepper Motor for Rear Hitch Blocked

HV1 520258.00 - Stepper Motor for Rear Hitch, Temperature Out of Range High

HV1 520258.01 - Stepper Motor for Rear Hitch, Temperature Out of Range Low

HV1 520259.02 - Neutral Position Fault, Signal Out of Range

HV1 520260.00 - Stepper Motor for Rear Hitch, Current Out of Range High

Group ICA: ICA Control Software

ICA 000628.02 - Control Software, Internal Error

ICA 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

ICA 521192.12 - VIN Information, Mismatch

Group JDL: JDL Control Software

JDL 000237.11 - JDLink Not Registered

JDL 000247.09 - Communication Error

JDL 000639.09 - JDLink Not Detecting CAN Bus Messages

JDL 000841.05 - GPS Antenna Error - Open Circuit

JDL 000841.06 - GPS Antenna Error - Grounded/Short Circuit

JDL 000841.07 - GPS Antenna Error - No Data Received

JDL 000964.13 - Real-Time Clock Failure

JDL 002850.02 - Cellular Antenna Error - Abnormal Signal

JDL 002850.05 - Cellular Antenna Error - Open Circuit

JDL 002850.06 - Cellular Antenna Error - Grounded/Short Circuit

JDL 002852.11 - Unable to Detect SIM Card

JDL 516672.14 - Network Authorization Failed

JDL 517244.02 - Wi-Fi Antenna, No Valid Signal

JDL 517244.05 - WiFi Antenna, Open Circuit

JDL 517244.06 - WiFi Antenna, Short to Ground / Short Circuit

JDL 522976.11 - Unable to Load Custom Alerts

JDL 522976.13 - Unable to Load Configuration

JDL 523310.00 - Low Memory

Group MFC: MFC Control Software

MFC 000628.02 - Control Software, Internal Error

MFC 000628.12 - Control Software, Internal Error

MFC 000629.12 - Control Software, Internal Error

MFC 000630.02 - Control Software, Internal Error

MFC 516315.09 - LIN Bus Message Cannot Be Received, Information from LIN Bus Module (Positions F and G)

MFC 516446.09 - LIN Bus Message Cannot Be Received, Information from LIN Bus Module (Positions F and G)

MFC 521409.02 - Multi-Function Lever (Switch 5), Fault

MFC 521410.02 - Multi-Function Lever (Switch 6), Fault

MFC 521411.02 - Multi-Function Lever (Switch 7), Fault

MFC 521412.02 - Multi-Function Lever (Switch 8), Fault

MFC 521413.02 - Multi-Function Lever (Switch 9), Fault

MFC 523343.02 - Multi-Function Lever (Rocker Switch for Function 3), Fault

MFC 523775.02 - Multi-Function Lever (Hand Detection), Fault

MFC 523776.02 - Multi-Function Lever (Lock Button), Fault

MFC 523804.02 - Multi-Function Lever (“Left/Right” Axis), Fault

MFC 523804.03 - Multi-Function Lever (“Left/Right” Axis), Voltage Too High

MFC 523804.04 - Multi-Function Lever (“Left-Right” Axis), Voltage Too Low

MFC 523805.02 - Multi-Function Lever (“Left/Right” Axis), Fault

MFC 523805.03 - Multi-Function Lever (“Left/Right” Axis), Voltage Too High

MFC 523805.04 - Multi-Function Lever (“Left-Right” Axis), Voltage Too Low

Group OIC: OIC Control Software

OIC 000091.02 - Foot Throttle Potentiometer, Voltages at Channel 1 and Channel 2 Not in the Correct Ratio

OIC 000091.03 - Foot Throttle Potentiometer, Voltage at Channel 1 Too High

OIC 000091.04 - Foot Throttle Potentiometer, Voltage at Channel 1 Too Low

OIC 000091.08 - INFORMATION FOR OPERATOR: Foot Throttle Potentiometer, Fault

OIC 000158.03 - Control Software, Supply Voltage (ELX) Too High

OIC 000158.04 - Control Software, Supply Voltage (ELX) Too Low

OIC 000168.03 - Control Software, Supply Voltage Too High

OIC 000168.04 - Control Software, Supply Voltage Too Low

OIC 000237.02 - VIN Information, Mismatch

OIC 000237.12 - VIN Information, High Error Rate

OIC 000237.14 - VIN Information, System Disabled

OIC 000237.31 - VIN Information, Incorrect

OIC 000628.02 - Control Software, Internal Fault

OIC 000628.12 - Control Software, Internal Error

OIC 000629.12 - Control Software, Internal Error

OIC 000639.12 - Vehicle CAN Bus (500 kBd), Very High Error Rate

OIC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

OIC 001504.02 - Operator Presence Switch Out of Range

OIC 001504.03 - Operator Presence Switch, Voltage Too High

OIC 001504.04 - Operator Presence Switch, Voltage Too Low

OIC 001504.08 - Operator Presence Switch Active Too Long, Time-out

OIC 003032.02 - Position of Right Brake Pedal, Out of Valid Range

OIC 003032.03 - Sensor Unit for Right Brake Pedal, Voltage Too High

OIC 003032.04 - Sensor Unit for Right Brake Pedal, Voltage Too Low

OIC 003032.08 - Mismatch between Right and Left Brake Pedals, Time-out

OIC 003032.13 - Sensor of Right Brake Pedal, Not Calibrated

OIC 003033.02 - Position of Left Brake Pedal, Out of Valid Range

OIC 003033.03 - Sensor Unit for Left Brake Pedal, Voltage Too High

OIC 003033.04 - Sensor Unit for Left Brake Pedal, Voltage Too Low

OIC 003033.08 - Mismatch between Left and Right Brake Pedals, Time-out

OIC 003033.13 - Sensor of Left Brake Pedal, Not Calibrated

OIC 003033.14 - INFORMATION FOR OPERATOR: Left Brake Pedal Not Actuated

OIC 003509.03 - 5-V Supply Voltage No. 1, Voltage Too High

OIC 003509.04 - 5-V Supply Voltage No. 1, Voltage Too Low

OIC 003509.06 - 5-V Supply Voltage No. 1, Current Too High

OIC 003510.03 - 5-V Supply Voltage No. 2, Voltage Too High

OIC 003510.04 - 5-V Supply Voltage No. 2, Voltage Too Low

OIC 003510.06 - 5-V Supply Voltage No. 2, Current Too High

OIC 003511.03 - 5-V Supply Voltage No. 3, Voltage Too High

OIC 003511.04 - 5-V Supply Voltage No. 3, Voltage Too Low

OIC 003511.06 - 5-V Supply Voltage No. 3, Current Too High

OIC 003597.03 - Switched Supply Voltage of the Cab Control Unit, Voltage Too High

OIC 003597.04 - Switched Supply Voltage of the Cab Control Unit, Voltage Too Low

OIC 003597.06 - Switched Supply Voltage of the Cab Control Unit, Current Too High

OIC 003598.03 - Supply Voltage 2 of the Cab Control Unit, Voltage Too High

OIC 003598.06 - Supply Voltage 2 of the Cab Control Unit, Current Too High

OIC 003599.03 - Supply Voltage 3 of the Cab Control Unit, Voltage Too High

OIC 003599.06 - Supply Voltage 3 of the Cab Control Unit, Current Too High

OIC 517002.02 - Sensor for Brake Pedal Lock Out of Range

OIC 517002.03 - Sensor for Brake Pedal Lock, Voltage Too High

OIC 517002.04 - Sensor for Brake Pedal Lock, Voltage Too Low

OIC 520425.07 - Reception of CAN Bus Message, Fault

OIC 520426.07 - Transmission of CAN Bus Message, Fault

OIC 520542.03 - CAN Bus +, Voltage Too High

OIC 520543.04 - CAN Bus -, Lead, Voltage Too Low

OIC 520870.02 - Control Software, Internal Error

OIC 520872.02 - Control Software, Internal Error

OIC 520965.03 - CAN BUS Terminating Resistor, CAN BUS Voltage Too High

OIC 520965.04 - CAN Bus Terminating Resistor, CAN Bus Voltage Too Low

OIC 520965.06 - CAN Bus Terminating Resistor, CAN Bus Current Too High

OIC 521423.08 - Left Brake Pedal Position, Fault

OIC 521423.09 - Left Brake Pedal Position, High Error Rate

OIC 522578.03 - Front-Wheel Drive Switch, Voltage Too High

OIC 522916.03 - Remote Control Switch for E-SCVs, Voltage Too High

OIC 522916.04 - Remote Control Switch for E-SCVs, Voltage Too Low

OIC 523677.02 - Clutch switch on range-shift lever, Internal fault

OIC 523677.03 - Clutch switch on range-shift lever, Voltage too high

OIC 523677.04 - Clutch switch on range-shift lever, Voltage too low

OIC 523677.07 - Declutch Switch on Range-Shift Lever, Malfunction

OIC 523690.03 - Switch for Remote Control of Rear Hitch (Right/Left), Voltage Too High

OIC 523690.04 - Switch for Remote Control of Rear Hitch (Right/Left), Voltage Too Low

OIC 523758.03 - Right Switch for Remote Control of Rear PTO, Voltage Too High

OIC 523758.04 - Right Switch for Remote Control of Rear PTO, Voltage Too Low

OIC 523759.03 - Left Switch for Remote Control of Rear PTO, Voltage Too High

OIC 523759.04 - Left Switch for Remote Control of Rear PTO, Voltage Too Low

OIC 524157.02 - Right Brake Pedal, Fault

OIC 524173.02 - Clutch Pedal Potentiometer, Voltages at Channel 1 and Channel 2 Out of Range

OIC 524173.03 - Clutch Pedal Potentiometer, Channel 1, Voltage Too High

OIC 524173.04 - Clutch Pedal Potentiometer, Channel 1, Voltage Too Low

OIC 524173.07 - Clutch Pedal Depressed While There is a Malfunction at the Clutch Pedal Switch

OIC 524173.08 - Clutch Pedal Potentiometer Out of Range

OIC 524223.03 - Differential Lock Switch, Voltage Too High

Group PAP: PAP Control Software

PAP 000628.12 - Control Software, Internal Error

PAP 000629.12 - Control Software, Internal Error

PAP 000630.02 - Control Software Internal Fault

PAP 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

PAP 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

Group PDU: PDU Control Software

PDU 000096.09 - Incorrect CAN Bus Message, Information from CCU Control Software

PDU 000569.09 - Incorrect CAN Bus Message, Information from CCU Control Software

PDU 000628.12 - Control Software, Internal Error

PDU 000629.09 - Control Software, Internal Error

PDU 000629.12 - Control Software, Internal Fault

PDU 000630.02 - Control Software, Internal Error

PDU 000630.11 - Control Software, Internal Error

PDU 000630.13 - Control Software, Internal Error

PDU 001087.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PDU 001761.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PDU 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PDU 002003.09 - Incorrect CAN Bus Message, Information from PTA, PTQ or PTD Control Software

PDU 002005.09 - Incorrect CAN Bus Message, Information from TIA, TIQ or TID Control Software

PDU 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

PDU 002007.09 - Incorrect CAN Bus Message, Information from RPT Control Software

PDU 002019.09 - Incorrect CAN Bus Message, Information from XSC Control Software

PDU 002020.09 - Incorrect CAN BUS Message, Information from SFA Control Software

PDU 002025.09 - Incorrect CAN Bus Message, Information from ATC/ ETC Control Software

PDU 002030.09 - Incorrect CAN Bus Message, Information from VLC Control Software

PDU 002034.09 - Incorrect CAN Bus Message, Information from SCC Control Software

PDU 002035.09 - Incorrect CAN Bus Message, Information from HCC Control Software

PDU 002036.09 - Incorrect CAN Bus Message, Information from PTF Control Software

PDU 002042.09 - Incorrect CAN Bus Message, Information from VTI Control Software

PDU 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

PDU 002050.09 - Incorrect CAN BUS message, Information from BLC control software

PDU 002055.09 - Incorrect CAN Bus Message, Information from RLC Control Software

PDU 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

PDU 002076.09 - Incorrect CAN BUS Message, Information from RCU Control Software

PDU 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

PDU 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

PDU 002149.09 - Incorrect CAN Bus Message, Information from VLC Control Software

PDU 002189.09 - Incorrect CAN Bus Message, Information from XMC Control Software

PDU 002213.09 - Incorrect CAN Bus Message, Information from SCO Control Software

PDU 002238.09 - Incorrect CAN Bus Message, Information from SMV Control Software

PDU 002240.09 - Incorrect CAN Bus Message, Information from TEC Control Software

PDU 002248.09 - Incorrect CAN Bus Message, Information from SMV Control Software

PDU 002255.09 - CAN Bus Message Incorrect

PDU 002348.09 - Incorrect CAN Bus Message, Information from VLC Control Software

PDU 002358.09 - Incorrect CAN Bus Message, Information from RLC Control Software

PDU 002612.09 - Incorrect CAN Bus Message, Information from CCU Control Software

PDU 003698.09 - Incorrect CAN Bus Message, Information from ECU Control Software (Temperature of Exhaust System)

PDU 005245.09 - Incorrect CAN Bus Message, Information from ECU Control Software (DEF Tank Level)

PDU 516444.09 - Incorrect CAN Bus Message, Information from RLC Control Software

PDU 516847.05 - Forward Travel Indicator Light on Instrument Unit, Voltage Too Low

PDU 516847.06 - Forward Travel Indicator Light on Instrument Unit, Current Too High

PDU 516848.05 - Reverse Travel Indicator Light on Instrument Unit, Voltage Too Low

PDU 516848.06 - Reverse Travel Indicator Light on Instrument Unit, Current Too High

PDU 521229.09 - Incorrect CAN Bus Message, Information from AIC Control Software

PDU 522532.09 - Incorrect CAN Bus Message, Information from AIC Control Software

PDU 523791.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PDU 524158.02 - Control Software, Internal Error

Group PL1: PL1 Control Software

PL1 000158.03 - Supply Voltage (ELX) Too High

PL1 000158.04 - Supply Voltage (ELX) Too Low

PL1 000237.02 - VIN Information, Mismatch

PL1 000237.12 - VIN Information, Incorrect

PL1 000237.14 - VIN Information, System De-Activated

PL1 000237.31 - VIN Information, Incorrect

PL1 000628.02 - Control Software, Internal Fault

PL1 000629.06 - Control Unit, Current Too High

PL1 000629.12 - Control Software, Internal Error

PL1 000630.02 - Control Software, Internal Error

PL1 000630.13 - Driver Not Calibrated

PL1 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

PL1 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

PL1 001231.12 - Drive Train CAN Bus (1000 kBd), High Error Rate

PL1 001231.14 - Drive Train CAN Bus (1000 kBd), High Error Rate

PL1 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

PL1 002824.02 - Reverse Drive Lever, Fault

PL1 516123.14 - Battery Disconnected

PL1 520872.02 - Control Software, Internal Error

PL1 521979.06 - Keep-Alive Voltage for Park Lock, Current Too High

PL1 523960.31 - INFORMATION FOR OPERATOR: Operator Not Seated When Reverse Drive Lever Was Actuated

PL1 523961.12 - INFORMATION FOR OPERATOR: Travel Speed Detected With Park Lock Engaged

Group PL2: PL2 Control Software

PL2 002190.09 - Incorrect CAN Bus Message, Information from PL1 Control Software

PL2 002192.09 - Incorrect CAN Bus Message, Information from PL3 Control Software

PL2 002193.09 - Incorrect CAN Bus Message, Information from PL4 Control Software

PL2 516397.05 - Park Lock Solenoid 1 (DirectDrive Transmission), Current Too Low

Group PL3: PL3 Control Software

PL3 000158.03 - Supply Voltage (ELX) Too High

PL3 000158.04 - Supply Voltage (ELX) Too Low

PL3 000237.02 - VIN Information, Mismatch

PL3 000237.12 - VIN Information, Incorrect

PL3 000237.14 - VIN Information, System De-Activated

PL3 000237.31 - VIN Information, Incorrect

PL3 000628.02 - Control Software, Internal Fault

PL3 000629.06 - Control Unit, Current Too High

PL3 000629.12 - Control Software, Internal Error

PL3 000629.14 - Control Software, Internal Error

PL3 000630.13 - Driver Not Calibrated

PL3 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

PL3 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

PL3 001231.12 - Drive Train CAN Bus (1000 kBd), High Error Rate

PL3 001231.14 - Drive Train CAN Bus (1000 kBd), High Error Rate

PL3 003597.06 - Output for Driver, Current Too High

PL3 520872.02 - Control Software, Internal Error

PL3 523966.14 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Select Direction of Travel

PL3 523966.31 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Select Neutral or Park Position

PL3 524173.02 - Clutch Pedal Potentiometer Fault

PL3 524173.03 - Clutch Pedal Potentiometer Voltage Too High

PL3 524173.04 - Clutch Pedal Potentiometer Voltage Too Low

PL3 524180.07 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Actuate Clutch to Stop

PL3 524180.14 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Fully Actuate Clutch Pedal

PL3 524180.31 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Release Clutch Pedal

Group PL4: PL4 Control Software

PL4 002190.09 - Incorrect CAN Bus Message, Information from PL1 Control Software

PL4 002191.09 - Incorrect CAN Bus Message, Information from PL2 Control Software

PL4 002192.09 - Incorrect CAN Bus Message, Information from PL3 Control Software

PL4 516398.05 - Park Lock Solenoid 2 (DirectDrive Transmission), Current Too Low

Group PLC: PLC Control Software

PLC 000158.03 - Supply Voltage (ELX) Too High

PLC 000158.04 - Supply Voltage (ELX) Too Low

PLC 000168.04 - Supply Voltage (BAT) Too Low

PLC 000190.09 - Incorrect CAN Bus Message, Engine Speed cannot be Received Regularly

PLC 000190.19 - CAN Bus Message, Engine Speed is Missing

PLC 000190.31 - CAN Bus Message, Engine Speed is Invalid

PLC 000628.02 - Control Software, Internal Error

PLC 000630.13 - Control Software, Internal Error

PLC 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PLC 002003.10 - Incorrect CAN Bus Message, Information from PTA Control Software

PLC 002003.12 - CAN Bus Message Missing, Information from PTA Control Software

PLC 002246.10 - Incorrect CAN Bus Message, Information from MDI Control Software

PLC 002246.12 - CAN Bus Message Missing, Information from MDI Control Software

PLC 002824.02 - Reverse Drive Lever, Fault

PLC 003510.03 - 5-V Power Supply Too High

PLC 003510.04 - 5-V Power Supply Too Low

PLC 003510.06 - 5-V Supply Voltage, Current Too High

PLC 520572.04 - Sensor for Transmission Output Speed, Voltage Too Low

PLC 520572.19 - CAN Bus Message, Transmission Output Speed is Invalid

PLC 520870.02 - Control Software, Internal Error

PLC 520871.02 - Control Software, Internal Error

PLC 520872.02 - Control Software, Internal Error

PLC 522379.04 - Park Lock Solenoid Valve 2, Voltage Too Low

PLC 522379.05 - Park Lock Solenoid Valve 2, Current Too Low

PLC 522379.14 - Park Lock Solenoid Valve 2, Voltage Too High

PLC 522379.15 - Park Lock Solenoid Valve 2, Current Too High

PLC 522379.17 - Park Lock Solenoid Valve 2, Open Circuit

PLC 523961.02 - Park Lock, Fault

PLC 523961.07 - Park Lock, Fault

PLC 523961.12 - Park Lock, Fault

PLC 523666.03 - Supply Voltage (BAT) Too High

PLC 523666.04 - Supply Voltage (BAT) Too Low

PLC 524173.03 - Clutch Pedal Potentiometer Voltage Too High

PLC 524173.04 - Clutch Pedal Potentiometer Voltage Too Low

PLC 524175.03 - Wheel Speed Sensor, Voltage Too High

PLC 524175.04 - Wheel Speed Sensor, Voltage Too Low

PLC 524195.03 - Sensor for Park Lock Pressure, Voltage Too High

PLC 524195.04 - Sensor for Park Lock Pressure, Voltage Too Low

PLC 524232.03 - Sensor for Park Lock Pressure, Voltage Too High

PLC 524232.04 - Sensor for Park Lock Pressure, Voltage Too Low

PLC 524232.12 - Sensor for Park Lock Pressure, Fault

Group PTA: PTA Control Software

PTA 000126.00 - Transmission Oil Filter Pressure Switch, Filter Restricted

PTA 000127.00 - Transmission Pressure High

PTA 000127.01 - Transmission Oil Pressure too Low

PTA 000127.03 - Transmission Pressure Sensor Voltage Too High

PTA 000127.04 - Transmission Pressure Sensor Voltage Too Low

PTA 000161.00 - Sensor for Transmission Input Speed, Speed Too High

PTA 000161.02 - Sensor for Transmission Input Speed, Speed Drop Not Plausible

PTA 000161.03 - Sensor for Transmission Input Speed, Voltage Too High

PTA 000161.04 - Sensor for Transmission Input Speed, Voltage Too Low

PTA 000161.08 - Transmission Input Speed or Motor Speed Incorrect

PTA 000161.11 - Sensor for Transmission Input Speed, Speed does Not Match Engine Speed

PTA 000168.00 - Transmission Control Unit (AutoPowr/IVT), Supply Voltage (BAT) Too High

PTA 000168.01 - Transmission Control Unit (AutoPowr/IVT), Supply Voltage (BAT) Too Low

PTA 000168.02 - Internal Transmission Supply Voltage (VPS1) Faulty

PTA 000177.00 - Transmission Oil Temperature Sensor, Temperature Very High

PTA 000177.03 - Transmission Oil Temperature Sensor, Voltage Too High

PTA 000177.04 - Transmission Oil Temperature Sensor, Voltage Too Low

PTA 000190.19 - CAN Bus Message, Engine Speed is Missing

PTA 000191.00 - Sensor for Transmission Output Speed, Speed Too High

PTA 000191.02 - Sensor for Transmission Output Speed, Speed Faulty

PTA 000191.03 - Sensor for Transmission Output Speed, Voltage at Channel 1 Too High

PTA 000191.04 - Sensor for Transmission Output Speed, Voltage at Channel 1 Too Low

PTA 000191.08 - Transmission Output Speed Sensor, Speed at Channel 1 Lower Than at Channel 2

PTA 000191.11 - Transmission Output Speed Does Not Correspond to Wheel Speed

PTA 000237.02 - VIN Information, Mismatch

PTA 000237.31 - VIN Information, Incorrect

PTA 000444.02 - Internal Transmission Supply Voltage (VPS2) Faulty

PTA 000598.02 - Transmission Enable Circuit Faulty

PTA 000598.03 - Transmission Enable Circuit, Voltage Too High

PTA 000598.12 - Transmission Enable Circuit Fault

PTA 000604.02 - Transmission Enable Signal Faulty

PTA 000604.03 - Transmission Enable Signal, Voltage Too High

PTA 000628.12 - Control Software, Internal Error

PTA 000629.12 - Control Software, Internal Error

PTA 000630.13 - Control Software Not Calibrated

PTA 001387.01 - Lube Oil Pressure Sensor, Oil Pressure Too Low

PTA 001387.03 - Lube Oil Pressure Sensor, Voltage Too High

PTA 001387.04 - Lube Oil Pressure Sensor, Voltage Too Low

PTA 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PTA 002005.09 - Incorrect CAN Bus Message, Information from TIA/TIN Control Software

PTA 002005.10 - Incorrect CAN Bus Message, Information from TIA/TIN Control Software

PTA 002005.12 - CAN Bus Message Missing, Information from TIA/TIN Control Software

PTA 002221.09 - Incorrect CAN Bus Message, Information from PLC Control Software

PTA 002221.10 - Incorrect CAN Bus Message, Information from PLC Control Software

PTA 002221.12 - CAN Bus Message Missing, Information from PLC Control Software

PTA 002246.09 - Incorrect CAN Bus Message, Information from MDI Control Software

PTA 002246.10 - Incorrect CAN Bus Message, Information from MDI Control Software

PTA 002246.12 - CAN Bus Message Missing, Information from MDI Control Software

PTA 003509.01 - 5-V Power Supply Too Low

PTA 003509.02 - 5-Volt Supply Voltage Faulty

PTA 003509.12 - 5-Volt Supply Voltage Faulty

PTA 003510.02 - 5-Volt Supply Voltage Faulty

PTA 003511.02 - 5-Volt Supply Voltage Faulty

PTA 522367.12 - Control Software Incorrectly Configured

PTA 522379.03 - Park Lock Solenoid Valve 1, Voltage Too High

PTA 522379.04 - Park Lock Solenoid Valve 1, Voltage Too Low

PTA 522379.05 - Park Lock Solenoid Valve 1, Current Too Low

PTA 522379.11 - Park Lock Solenoid Valve 1, Malfunction

PTA 522389.03 - Solenoid Valve for Clutch 4, Voltage Too High

PTA 522389.04 - Solenoid Valve for Clutch 4, Voltage Too Low

PTA 522389.05 - Solenoid Valve for Clutch 4, Current Too Low

PTA 522392.03 - Solenoid Valve for Clutch 3, Voltage Too High

PTA 522392.04 - Solenoid Valve for Clutch 3, Voltage Too Low

PTA 522392.05 - Solenoid Valve for Clutch 3, Current Too Low

PTA 522395.03 - Solenoid Valve for Clutch 2, Voltage Too High

PTA 522395.04 - Solenoid Valve for Clutch 2, Voltage Too Low

PTA 522395.05 - Solenoid Valve for Clutch 2, Current Too Low

PTA 522399.03 - Solenoid Valve for Clutch 1, Voltage Too High

PTA 522399.04 - Solenoid Valve for Clutch 1, Voltage Too Low

PTA 522399.05 - Solenoid Valve for Clutch 1, Current Too Low

PTA 522976.02 - Control Software, Internal Error

PTA 523380.02 - Transmission, Internal Error

PTA 523380.12 - Transmission, Internal Error

PTA 523380.31 - Transmission, Internal Error

PTA 523438.02 - Control Software, Internal Error

PTA 523652.11 - Transmission control unit (AutoPowr/IVT) connected to wrong wiring harness connector

PTA 523700.07 - Signals from Transmission Speed Sensors Mismatch

PTA 523917.03 - Hydrostatic Speed Sensor, Voltage in Channel 2 Too High

PTA 523917.04 - Hydrostatic Speed Sensor, Voltage in Channel 2 Too Low

PTA 523917.08 - Hydrostatic Speed Sensor, Speed at Channel 2 Lower Than at Channel 1

PTA 523959.31 - Signal for Direction of Travel, Fault

PTA 524107.03 - Proportional Solenoid Valve 2 for Hydrostatic Unit, Voltage Too High

PTA 524107.04 - Proportional Solenoid Valve 2 for Hydrostatic Unit, Voltage Too Low

PTA 524107.05 - Proportional Solenoid Valve 2 for Hydrostatic Unit, Current Too Low

PTA 524108.03 - Proportional Solenoid Valve 1 for Hydrostatic Unit, Voltage Too High

PTA 524108.04 - Proportional Solenoid Valve 1 for Hydrostatic Unit, Voltage Too Low

PTA 524108.05 - Proportional Solenoid Valve 1 for Hydrostatic Unit, Current Too Low

PTA 526109.10 - Wheel Speed Sensor, Fault

PTA 524110.03 - Sensor for Transmission Output Speed, Voltage at Channel 2 Too High

PTA 524110.04 - Sensor for Transmission Output Speed, Voltage at Channel 2 Too Low

PTA 524110.08 - Transmission Output Speed Sensor, Speed at Channel 2 Lower Than at Channel 1

PTA 524153.03 - Solenoid Valve for Disk Brake, Voltage Too High

PTA 524153.04 - Solenoid Valve for Disk Brake, Voltage Too Low

PTA 524153.05 - Solenoid Valve for Disk Brake, Current Too Low

PTA 524154.03 - Proportional Solenoid Valve for Forward Clutch, Voltage Too High

PTA 524154.04 - Proportional Solenoid Valve for Forward Clutch, Voltage Too Low

PTA 524154.05 - Proportional Solenoid Valve for Forward Clutch, Current Too Low

PTA 524155.03 - Proportional Solenoid Valve for Reverse Clutch, Voltage Too High

PTA 524155.04 - Proportional Solenoid Valve for Reverse Clutch, Voltage Too Low

PTA 524155.05 - Proportional Solenoid Valve for Reverse Clutch, Current Too Low

PTA 524156.07 - Hydrostatic Unit, Current Does Not Match Registered Speed

PTA 524158.02 - Control Software, Wrong Main Control Software

PTA 524161.19 - Incorrect CAN Bus Message, Desired Acceleration from TIA/TIN Control Software

PTA 524165.19 - Incorrect CAN Bus Message, Clutch Torque Command from TIA/TIN Control Software

PTA 524167.19 - Incorrect CAN Bus Message, Park Lock Condition from TIA/TIN Control Software

PTA 524170.19 - Incorrect CAN Bus Message, Park Lock Condition from TIA/TIN Control Software

PTA 524171.19 - Incorrect CAN Bus Message, Direction of Travel from TIA/TIN Control Software

PTA 524172.19 - Incorrect CAN Bus Message, Clutch Pedal Information from TIA/TIN Control Software

PTA 524174.19 - Incorrect CAN Bus Message, Park Lock Activation from TIA/TIN Control Software

PTA 524175.19 - Incorrect CAN Bus Message, Transmission Output Speed from TIA/TIN Control Software

PTA 524176.19 - Incorrect CAN Bus Message, Status of Park Lock Pressure Sensor from TIA/TIN Control Software

PTA 524177.19 - Incorrect CAN Bus Message, Transmission Output Speed from TIA/TIN Control Software

PTA 524178.19 - Incorrect CAN Bus Message, Transmission Output Speed from TIA/TIN Control Software

PTA 524179.19 - Incorrect CAN Bus Message, Status of Park Lock Solenoid Valve 2 from PLC Control Software

PTA 524180.19 - Incorrect CAN Bus Message, Status of Come-Home Mode from TIA/TIN Control Software

PTA 524181.19 - Incorrect CAN Bus Message, Desired Acceleration from TIA/TIN Control Software

PTA 524182.19 - Incorrect CAN Bus Message, Transmission Shift Monitor from TIA/TIN Control Software

PTA 524183.19 - Incorrect CAN Bus Message, Change of Direction of Travel from TIA/TIN Control Software

PTA 524193.17 - INFORMATION FOR OPERATOR: Transmission Warm-up Routine Active

PTA 524193.18 - INFORMATION FOR OPERATOR: Transmission Warm-up Routine Active

PTA 524218.12 - Park Lock, Fault

PTA 524218.31 - Power Zero, Malfunction

PTA 524227.07 - Pressure Switch for Filter Bypass Valve Open by Mistake

PTA 524227.12 - Pressure Switch for Filter Bypass Valve Closed by Mistake

PTA 524233.03 - Hydrostatic Speed Sensor, Voltage in Channel 1 Too High

PTA 524233.04 - Hydrostatic Speed Sensor, Voltage in Channel 1 Too Low

PTA 524233.08 - Hydrostatic Speed Sensor, Speed at Channel 1 Lower Than at Channel 2

Group PTD: PTD Control Software

PTD 000127.01 - Transmission Oil Pressure Too Low

PTD 000127.03 - Transmission Pressure Sensor Voltage Too High

PTD 000127.04 - Transmission Pressure Sensor Voltage Too Low

PTD 000127.12 - Transmission Oil Pressure Sensor, Fault

PTD 000191.17 - Transmission Output Speed Too Low

PTD 000628.02 - Control Software, Internal Error

PTD 000630.02 - Control Software, Internal Error

PTD 000630.13 - Transmission Not Calibrated

PTD 000630.14 - Calibration Values Out of Range

PTD 000734.05 - Proportional Solenoid Valve for Forward Clutch, Current Too Low

PTD 000734.06 - Proportional Solenoid Valve for Forward Clutch, Current Too High

PTD 000735.05 - Proportional Solenoid Valve for Reverse Brake, Current Too Low

PTD 000735.06 - Proportional Solenoid Valve for Reverse Brake, Current Too High

PTD 000736.05 - Proportional Solenoid Valve for Clutch for Side Shaft 2, Current Too Low

PTD 000736.06 - Proportional Solenoid Valve for Clutch for Side Shaft 2, Current Too High

PTD 000737.05 - Proportional Solenoid Valve for Clutch for Side Shaft 1, Current Too Low

PTD 000737.06 - Proportional Solenoid Valve for Clutch for Side Shaft 1, Current Too High

PTD 002000.09 - Incorrect CAN BUS Message, Information from ECU Control Software

PTD 002005.09 - Incorrect CAN Bus Message, Information from TID Control Software

PTD 002005.12 - Incorrect Information from TID Control Software

PTD 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

PTD 002049.09 - Incorrect CAN BUS Message, Information from OIC Control Software

PTD 002071.09 - Incorrect CAN BUS Message, Information from CCU Control Software

PTD 002145.09 - Incorrect CAN BUS Message, Information from FCC Control Software

PTD 002158.09 - Incorrect CAN Bus Message, Information from GPM Control Software

PTD 002159.09 - Incorrect CAN Bus Message, Information from RPM Control Software

PTD 003509.03 - 5 V Supply Voltage, Voltage Too High

PTD 003509.04 - 5-Volt Supply Voltage, Voltage Too Low

PTD 520589.02 - Wheel Speed Sensor (Channel 2), Incorrect Speed

PTD 521237.03 - Forward Clutch Oil Pressure Too High

PTD 521237.04 - Forward Clutch Oil Pressure Too Low

PTD 521239.03 - Reverse Brake Oil Pressure Too High

PTD 521239.04 - Reverse Brake Oil Pressure Too Low

PTD 523331.03 - Reverse Brake Oil Pressure Sensor Voltage Too High

PTD 523331.04 - Reverse Brake Oil Pressure Sensor Voltage Too Low

PTD 523331.12 - Reverse Brake Oil Pressure Sensor, Fault

PTD 523332.03 - Forward Clutch Oil Pressure Sensor Voltage Too High

PTD 523332.04 - Forward Clutch Oil Pressure Sensor Voltage Too Low

PTD 523332.12 - Forward Clutch Oil Pressure Sensor, Fault

PTD 523711.02 - Wheel Speed Sensor (Channel 1), Incorrect Speed

PTD 523953.02 - Reverse Drive Lever, Wrong Direction Detected

PTD 524193.14 - INFORMATION FOR OPERATOR: Transmission Warm-up Routine Active

PTD 524226.08 - Shift Operation Failed

PTD 524239.31 - Wheel Speed Fault

PTD 524254.02 - Transmission Enable Fault

PTD 524267.16 - Forward Clutch, Oil Pressure And Slip Too High

Group PTF: PTF Control Software

PTF 000084.09 - CAN Bus Message Cannot be Received, Information from CCU Control Software

PTF 000158.03 - Control Software, Supply Voltage (ELX) Too High

PTF 000158.04 - Control Software, Supply Voltage (ELX) Too Low

PTF 000168.03 - Control Software, Supply Voltage (BAT) Too High

PTF 000168.04 - Control Software, Supply Voltage (BAT) Too Low

PTF 000177.09 - CAN Bus Message Cannot Be Received, Information from PTA Control Software

PTF 000177.19 - Transmission Oil Temperature Sensor, Fault

PTF 000177.31 - Transmission Oil Temperature Sensor Fault

PTF 000186.01 - Front PTO Speed Sensor, Overload Protection Activated

PTF 000186.04 - Front PTO speed sensor, Voltage too low

PTF 000186.05 - Front PTO speed sensor, Open circuit

PTF 000186.15 - Front PTO speed sensor, Speed too high

PTF 000186.17 - Front PTO speed sensor, Speed too low

PTF 000190.09 - CAN Bus Message Cannot be Received, Information from ECU Control Software

PTF 000190.19 - Engine Speed Sensor, Fault

PTF 000190.31 - Engine Speed Sensor, Fault

PTF 000628.02 - Control Software, Internal Error

PTF 000630.13 - Control Software, Internal Error

PTF 001504.09 - CAN Bus Message Cannot be Received, Information from OIC Control Software

PTF 001504.19 - Operator presence switch, Malfunction

PTF 001504.31 - Operator presence switch, Malfunction

PTF 001893.31 - INFORMATION FOR OPERATOR: Front PTO Switch On When Engine was Started

PTF 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PTF 002003.09 - Incorrect CAN Bus Message, Information from PTA, PTQ or PTD Control Software

PTF 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

PTF 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

PTF 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

PTF 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

PTF 002155.09 - Incorrect CAN Bus Message, Information from PAP Control Software

PTF 002238.09 - Incorrect CAN Bus Message, Information from SMV Control Software

PTF 002240.09 - Incorrect CAN Bus Message, Information from TEC Control Software

PTF 002246.09 - Incorrect CAN Bus Message, Information from MDI Control Software

PTF 520870.02 - Control Software, Internal Error

PTF 520871.02 - Control Software, Internal Error

PTF 520872.02 - Control Software, Internal Error

PTF 521431.02 - Front PTO Signal, Fault

PTF 521431.03 - Front PTO Signal, Voltage Too High

PTF 522011.02 - OIC control software, Malfunction

PTF 522011.09 - Incorrect CAN Bus Message, Information from OIC Control Software

PTF 522011.19 - OIC control software, Malfunction

PTF 522011.31 - OIC control software, Malfunction

PTF 522390.09 - Incorrect CAN Bus Message, Information from Implement

PTF 522390.11 - Tractor-Implement Automation™ Fault

PTF 523665.03 - Control Software, Supply Voltage (BAT) Too High

PTF 523665.04 - Control Software, Supply Voltage (BAT) Too Low

PTF 523666.03 - Control Software, Supply Voltage (BAT) Too High

PTF 523666.04 - Control Software, Supply Voltage (BAT) Too Low

PTF 523749.31 - INFORMATION FOR OPERATOR: Front PTO Load Too High

PTF 523904.31 - INFORMATION FOR OPERATOR: Operator Presence Switch Not Activated While Front PTO is Engaged

PTF 523905.04 - Front PTO Solenoid Valve, Voltage Too Low

PTF 523905.05 - Front PTO Solenoid Valve, Current Too Low

PTF 523905.14 - Front PTO Solenoid Valve, Voltage Too High

PTF 523905.15 - Front PTO Solenoid Valve, Current Too High

PTF 523905.17 - Front PTO Solenoid Valve, Open Circuit

PTF 524216.02 - Front PTO switch, Malfunction

PTF 524216.09 - Incorrect CAN Bus Message, Information from OIC Control Software

PTF 524216.19 - Front PTO switch, Malfunction

PTF 524216.31 - Front PTO switch, Malfunction

Group PTQ: PTQ Control Software

PTQ 000084.07 - Wheel Speed Detected During Transmission Calibration, Malfunction

PTQ 000084.14 - Wheel Speed Sensor, Fault

PTQ 000127.01 - Transmission Oil Pressure Out of Range Low

PTQ 000127.03 - Transmission Oil Pressure Switch, Voltage Too High

PTQ 000127.04 - Transmission Oil Pressure Switch, Voltage Too Low

PTQ 000168.01 - Control Software, Supply Voltage (BAT) Too Low

PTQ 000168.18 - Control Software, Supply Voltage (BAT) Too Low

PTQ 000190.18 - INFORMATION FOR OPERATOR: Engine Speed Too Low

PTQ 000191.00 - Transmission Speed Too High During Calibration

PTQ 000191.17 - Transmission Speed Too Low

PTQ 000628.02 - Control Software, Internal Error

PTQ 000628.12 - Control Software, Internal Error

PTQ 000630.02 - Control Software, Internal Error

PTQ 000630.13 - Transmission System Not Calibrated

PTQ 000630.14 - Stored Calibration Values Out of Range

PTQ 000639.12 - Powertrain CAN BUS, High Error Rate

PTQ 000734.05 - Forward Solenoid Valve, Current Too Low

PTQ 000734.06 - Forward Solenoid Valve, Current Too High

PTQ 000735.05 - Reverse Solenoid Valve, Current Too Low

PTQ 000735.06 - Reverse Solenoid Valve, Current Too High

PTQ 000736.05 - Gear Selector Solenoid Valve K1, Current Too Low

PTQ 000736.06 - Gear Selector Solenoid Valve K1, Current Too High

PTQ 000737.05 - Gear Selector Solenoid Valve K2, Current Too Low

PTQ 000737.06 - Gear Selector Solenoid Valve K2, Current Too High

PTQ 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

PTQ 002005.09 - Incorrect CAN Bus Message, Information from TIQ Control Software

PTQ 002005.12 - Vehicle CAN Bus (500 kBd), High Error Rate

PTQ 002019.09 - Incorrect CAN Bus Message, Information on Wheel Speed

PTQ 002145.09 - Incorrect CAN Bus Message, Information from FCC Control Software

PTQ 002824.02 - Reverse Drive Lever, Not-Neutral Switch, Out of Range

PTQ 002833.31 - INFORMATION FOR OPERATOR: Vehicle Rolls Despite Park Lock Being Engaged

PTQ 004309.14 - INFORMATION FOR OPERATOR: When Changing Ranges, Vehicle Changes Direction

PTQ 521925.31 - INFORMATION FOR OPERATOR: Operator's Seat Not Occupied During a Range Change

PTQ 522150.14 - INFORMATION FOR OPERATOR: Engine overload protection

PTQ 522188.14 - INFORMATION FOR OPERATOR: Transmission Speed Too High During Shift Operation

PTQ 522847.05 - Proportional Solenoid Valve for Transmission Enable, Current Too Low

PTQ 522847.06 - Proportional Solenoid Valve for Transmission Enable, Current Too High

PTQ 523677.14 - INFORMATION FOR OPERATOR: Declutch Switch on Range-Shift Lever Disabled

PTQ 523677.31 - INFORMATION FOR OPERATOR: Declutch Switch on Range-Shift Lever Deactivated, No Operator Present

PTQ 523953.02 - Reverse Drive Lever Out of Range

PTQ 523961.07 - INFORMATION FOR OPERATOR: Reverse Drive Lever Not In Neutral Position

PTQ 523966.31 - Tractor in "come home" mode - INFORMATION FOR OPERATOR: Reverse drive lever in position for neutral or park

PTQ 524173.03 - Clutch Pedal Potentiometer, Channel 1, Voltage Too High

PTQ 524173.04 - Clutch Pedal Potentiometer, Channel 1, Voltage Too Low

PTQ 524230.03 - Proportional Solenoid Valve for Transmission Enable, Voltage Too High

PTQ 524230.04 - Proportional Solenoid Valve for Transmission Enable, Voltage Too Low

PTQ 524230.05 - Proportional Solenoid Valve for Transmission Enable, Current Too Low

PTQ 524230.06 - Proportional Solenoid Valve for Transmission Enable, Current Too High

PTQ 524234.03 - Transmission Enable Sensor, Voltage Too High

PTQ 524234.04 - Transmission Enable Sensor, Voltage Too Low

PTQ 524254.02 - Transmission Enable Signal, Internal Fault

PTQ 524267.16 - INFORMATION FOR OPERATOR: Forward Clutch Overloaded

Group RLC: RLC Control Software

RLC 000158.00 - Control Software, Supply Voltage (ELX) Too High

RLC 000158.01 - Control Software, Supply Voltage (ELX) Too Low

RLC 000158.03 - Control Software, Supply Voltage (ELX) Too High

RLC 000158.04 - Control Software, Supply Voltage (ELX) Too Low

RLC 000158.17 - Control Software, Supply Voltage (ELX) Too Low

RLC 000158.18 - Control Software, Supply Voltage (ELX) Too Low

RLC 000444.03 - Control Software, Supply Voltage (BAT at Terminal J4) Too High

RLC 000444.04 - Control Software, Supply Voltage (BAT at Terminal J4) Too Low

RLC 000444.06 - Control Software, Current (Pin J4) Too High

RLC 000628.02 - Control Software, Internal Error

RLC 000628.12 - Control Software, Internal Error

RLC 000629.12 - Control Software, Internal Error

RLC 000630.02 - Control Software, Internal Error

RLC 000630.13 - Control Software, Internal Error

RLC 000630.14 - Control Software, Internal Error

RLC 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

RLC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

RLC 001231.12 - Implement CAN Bus, High Error Rate

RLC 001231.14 - Implement CAN Bus, Very High Error Rate

RLC 001487.06 - Backlighting, Current Too High

RLC 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Unit

RLC 002007.09 - Incorrect CAN Bus Message, Information from RPT Control Software

RLC 002025.09 - Incorrect CAN Bus Message, Information from ATC/ ETC Control Software

RLC 002036.09 - Incorrect CAN Bus Message, Information from PTF Control Software

RLC 002040.09 - Incorrect CAN Bus Message, Information from PDU Control Software

RLC 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

RLC 002050.09 - Incorrect CAN Bus Message, Information from CLC Control Software

RLC 002055.06 - RLC Control Software, Current Too High

RLC 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

RLC 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

RLC 002145.09 - Incorrect CAN Bus Message, Information from FCC Control Software

RLC 002149.09 - Incorrect CAN Bus Message, Information from VLC Control Software

RLC 002240.09 - Incorrect CAN Bus Message, Information from TEC Control Software

RLC 002352.03 - Low Beam for Headlights on Cab Frame, Voltage Too High

RLC 002352.05 - Low-Beam Headlights on Cab Frame, Current Too Low

RLC 002352.06 - Low-Beam Headlights on Cab Frame, Current Too High

RLC 002358.03 - High-Beam Headlights on Cab Frame, Voltage Too High

RLC 002358.05 - High-Beam Headlights on Cab Frame, Current Too Low

RLC 002358.06 - High-Beam Headlights on Cab Frame, Current Too High

RLC 002368.03 - Left Front Turn-Signal Light, Voltage Too High

RLC 002368.05 - Left Turn-Signal Light on Front, Current Too Low

RLC 002368.06 - Left Turn-Signal Light on Front, Current Too High

RLC 002370.03 - Right Front Turn-Signal Light, Voltage Too High

RLC 002370.05 - Right Turn-Signal Light on Front, Current Too Low

RLC 002370.06 - Right Turn-Signal Light on Front, Current Too High

RLC 002382.03 - Clearance Lights on Cab Frame, Voltage Too High

RLC 002382.05 - Clearance Lights on Cab Frame, Current Too Low

RLC 002382.06 - Clearance Lights on Cab Frame, Current Too High

RLC 002386.03 - Beacon Light, Voltage Too High

RLC 002386.05 - Beacon Light, Current Too Low

RLC 002386.06 - Beacon Light, Current Too High

RLC 002390.03 - License Plate Light, Voltage Too High

RLC 002390.05 - License Plate Light, Current Too Low

RLC 002390.06 - License Plate Light, Current Too High

RLC 002865.02 - Rear Window Wiper Switch, Fault

RLC 003976.03 - Dome Light, Voltage Too High

RLC 003976.05 - Dome Light, Current Too Low

RLC 003976.06 - Dome Light, Current Too High

RLC 004058.02 - Dome Light Switch Fault

RLC 520273.03 - Console Light, Voltage Too High

RLC 520273.05 - Console Light, Current Too Low

RLC 520273.06 - Console Light, Current Too High

RLC 520425.07 - Received CAN Bus Messages, High Error Rate

RLC 520426.07 - Transmitted CAN Bus Messages, High Error Rate

RLC 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

RLC 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

RLC 521393.06 - Rear Window Wiper (Home Position), Current Too High

RLC 521535.03 - Left Worklight on Cab Frame, Voltage Too High

RLC 521535.05 - Left Worklight on Cab Frame, Current Too Low

RLC 521535.06 - Left Worklight on Cab Frame, Current Too High

RLC 521536.03 - Left Worklight on Cab Frame, Voltage Too High

RLC 521536.05 - Left Worklight on Cab Frame, Current Too Low

RLC 521536.06 - Left Worklight on Cab Frame, Current Too High

RLC 521537.03 - Left Outer Worklight on Front of Roof, Left Turn-Signal Light on Front of Roof (SAE) or Left Extra-Wide Vehicle Turn-Signal Light (SAE), Voltage Too High

RLC 521537.05 - Left Outer Worklight on Front of Roof, Left Turn-Signal Light on Front of Roof (SAE) or Left Extra-Wide Vehicle Turn-Signal Light (SAE), Current Too Low

RLC 521537.06 - Left Outer Worklight on Front of Roof, Left Turn-Signal Light on Front of Roof (SAE) or Left Extra-Wide Vehicle Turn-Signal Light (SAE), Current Too High

RLC 521538.03 - Left Inner Worklight on Front of Roof, Voltage Too High

RLC 521538.05 - Left Center Worklight on Front of Roof, Current Too Low

RLC 521538.06 - Left Center Worklight on Front of Roof, Current Too High

RLC 521539.03 - Left Inner Worklight on Front of Roof, Voltage Too High

RLC 521539.05 - Left Inner Worklight on Front of Roof, Current Too Low

RLC 521539.06 - Left Inner Worklight on Front of Roof, Current Too High

RLC 521541.03 - Left Side-Facing Worklight on Rear of Roof, Voltage Too High

RLC 521541.05 - Left Side-Facing Worklight on Rear of Roof, Current Too Low

RLC 521541.06 - Left Side-Facing Worklight on Rear of Roof, Current Too High

RLC 521542.03 - Left Outer Worklight on Rear of Roof or Left Turn-Signal Light on Rear of Roof (SAE), Voltage Too High

RLC 521542.05 - Left Outer Worklight on Rear of Roof or Left Turn-Signal Light on Rear of Roof (SAE), Current Too Low

RLC 521542.06 - Left Outer Worklight on Rear of Roof or Left Turn-Signal Light on Rear of Roof (SAE), Current Too High

RLC 521544.03 - Left Inner Worklight on Rear of Roof, Voltage Too High

RLC 521544.05 - Left Inner Worklights on Rear of Roof, Current Too Low

RLC 521544.06 - Left Inner Worklights on Rear of Roof, Current Too High

RLC 521553.03 - Right Worklight on Cab Frame, Voltage Too High

RLC 521553.05 - Right Worklight on Cab Frame, Current Too Low

RLC 521553.06 - Right Worklight on Cab Frame, Current Too High

RLC 521554.03 - Right Worklight on Cab Frame, Voltage Too High

RLC 521554.05 - Right Worklight on Cab Frame, Current Too Low

RLC 521554.06 - Right Worklight on Cab Frame, Current Too High

RLC 521555.03 - Right Outer Worklight on Front of Roof, Right Turn-Signal Light on Front of Roof (SAE) or Right Extra-Wide Vehicle Turn-Signal Light (SAE), Voltage Too High

RLC 521555.05 - Right Outer Worklight on Front of Roof, Right Turn-Signal Light on Front of Roof (SAE) or Right Extra-Wide Vehicle Turn-Signal Light (SAE), Current Too Low

RLC 521555.06 - Right Outer Worklight on Front of Roof, Right Turn-Signal Light on Front of Roof (SAE) or Right Extra-Wide Vehicle Turn-Signal Light (SAE), Current Too High

RLC 521556.03 - Right Center Worklight on Front of Roof, Voltage Too High

RLC 521556.05 - Right Center Worklight on Front of Roof, Current Too Low

RLC 521556.06 - Right Center Worklight on Front of Roof, Current Too High

RLC 521557.03 - Right Inner Worklight on Front of Roof, Voltage Too High

RLC 521557.05 - Right Inner Worklight on Front of Roof, Current Too Low

RLC 521557.06 - Right Inner Worklight on Front of Roof, Current Too High

RLC 521559.03 - Right Side-Facing Worklight on Rear of Roof, Voltage Too High

RLC 521559.05 - Right Side-Facing Worklight on Rear of Roof, Current Too Low

RLC 521559.06 - Right Side-Facing Worklight on Rear of Roof, Current Too High

RLC 521560.03 - Right Outer Worklight on Rear of Roof or Right Turn-Signal Light on Rear of Roof (SAE), Voltage Too High

RLC 521560.05 - Right Outer Worklight on Rear of Roof or Right Turn-Signal Light on Rear of Roof (SAE), Current Too Low

RLC 521560.06 - Right Outer Worklight on Rear of Roof or Right Turn-Signal Light on Rear of Roof (SAE), Current Too High

RLC 521562.03 - Right Inner Worklight on Rear of Roof, Voltage Too High

RLC 521562.05 - Right Inner Worklights on Rear of Roof, Current Too Low

RLC 521562.06 - Right Inner Worklights on Rear of Roof, Current Too High

RLC 521567.06 - Turn-Signal Lights, Current Too High

RLC 521835.20 - Control Software RLC, Ground Contact Fault

RLC 522343.03 - Heated Rear Window, Voltage Too High

RLC 522343.05 - Heated Rear Window, Current Too Low

RLC 522343.06 - Heated Rear Window, Current Too High

RLC 522433.03 - Rear Window Wiper, Voltage Too High

RLC 522433.06 - Rear Window Wiper, Current Too High

RLC 522435.06 - Windshield Wiper (Fast), Current Too High

RLC 524259.00 - Roof Control Unit, Temperature Too High

RLC 524259.15 - Roof Control Unit, Temperature Too High

RLC 524259.16 - Roof Control Unit, Temperature Too High

Group RPM: RPM Control Software

RPM 000168.04 - Supply Voltage (BAT) Too Low

RPM 000628.02 - Control Software Internal Fault

RPM 000630.02 - Control Software Internal Fault

RPM 521926.05 - Range C Solenoid Current Too Low

RPM 521926.06 - Range C Solenoid Current Too High

RPM 521926.07 - Range C Fault

RPM 521926.17 - Time-Out When Engaging Range C

RPM 521926.18 - INFORMATION FOR OPERATOR: Range C Cannot Be Engaged

RPM 521927.05 - Range B Solenoid Current Too Low

RPM 521927.06 - Range B Solenoid Current Too High

RPM 521927.07 - Range B Fault

RPM 521927.17 - Time-Out When Engaging Range B

RPM 521927.18 - INFORMATION FOR OPERATOR: Range B Cannot Be Engaged

RPM 521935.05 - Range A Solenoid Current Too Low

RPM 521935.06 - Range A Solenoid Current Too High

RPM 521935.07 - Range A Fault

RPM 521935.17 - Time-Out When Engaging Range A

RPM 521935.18 - INFORMATION FOR OPERATOR: Range A Cannot Be Engaged

RPM 521991.06 - Control Unit for Range Shifting, Current Too High

RPM 521991.12 - Control Unit for Range Shifting, Temperature Too High

Group RPT: RPT Control Software

RPT 000084.09 - CAN Bus Message Cannot be Received, Information from CCU Control Software

RPT 000084.19 - Wheel Speed Sensor, Fault

RPT 000084.31 - Wheel Speed Sensor, Malfunction

RPT 000158.03 - Control Software, Supply Voltage (ELX) Too High

RPT 000158.04 - Control Software, Supply Voltage (ELX) Too Low

RPT 000168.03 - Control Software, Supply Voltage (BAT) Too High

RPT 000168.04 - Control Software, Supply Voltage (BAT) Too Low

RPT 000177.09 - CAN Bus Message Cannot Be Received, Information from PTA Control Software

RPT 000177.19 - Transmission Oil Temperature Sensor, Fault

RPT 000177.31 - Transmission Oil Temperature Sensor, Malfunction

RPT 000186.01 - Rear PTO Speed Sensor, Overload Protection Activated

RPT 000186.04 - Rear PTO Speed Sensor, Voltage Too Low

RPT 000186.05 - Rear PTO Speed Sensor, Open Circuit

RPT 000186.15 - Rear PTO Speed Sensor, Speed Too High

RPT 000186.17 - Rear PTO Speed Sensor, Speed Too Low

RPT 000190.09 - CAN Bus Message Cannot be Received, Information from ECU Control Software

RPT 000190.19 - Engine Speed Sensor, Fault

RPT 000190.31 - Engine Speed Sensor, Malfunction

RPT 000628.02 - Control Software Internal Fault

RPT 000630.13 - Control Software Not or Incorrectly Calibrated

RPT 001504.09 - CAN Bus Message Cannot be Received, Information from OIC Control Software

RPT 001504.19 - Operator presence switch, Malfunction

RPT 001504.31 - Operator Presence Switch, Malfunction

RPT 001883.00 - Rear PTO Speed Much Too High

RPT 001883.31 - Rear PTO speed too high

RPT 001890.03 - PTO Shaft Spline Identifier Switch, Voltage Too High

RPT 001890.04 - PTO Shaft Spline Identifier Switch, Voltage Too Low

RPT 001890.31 - PTO Shaft Spline Identifier Switch, Malfunction

RPT 001894.31 - INFORMATION FOR OPERATOR: Rear PTO Switch On When Engine was Started

RPT 001896.14 - INFORMATION FOR OPERATOR: Rear PTO Switch On Although Preselection of Rear PTO Speed Was in Neutral

RPT 001896.31 - INFORMATION FOR OPERATOR: Do Not Change Preselection of Rear PTO Speed Repeatedly

RPT 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

RPT 002003.09 - Incorrect CAN Bus Message, Information from PTA/PTQ Control Software

RPT 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

RPT 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

RPT 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

RPT 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

RPT 002155.09 - Incorrect CAN Bus Message, Information from PAP Control Software

RPT 002238.09 - Incorrect CAN Bus Message, Information from SMV Control Software

RPT 002240.09 - Incorrect CAN Bus Message, Information from TEC Control Software

RPT 002246.09 - Incorrect CAN Bus Message, Information from MDI Control Software

RPT 002818.31 - INFORMATION FOR OPERATOR: Operator Presence Switch Not Activated

RPT 520870.02 - Control Software Internal Fault

RPT 520871.02 - Control Software, Internal Error

RPT 520872.02 - Control Software, Internal Error

RPT 521431.02 - Rear PTO Signal, Fault

RPT 521431.03 - Rear PTO Signal, Voltage Too High

RPT 522011.02 - OIC Control Software, Malfunction

RPT 522011.09 - Incorrect CAN Bus Message, Information from OIC Control Software

RPT 522011.19 - OIC Control Software, Malfunction

RPT 522011.31 - OIC Control Software, Malfunction

RPT 522390.09 - Incorrect CAN Bus Message, Information from Implement

RPT 522390.11 - Tractor-Implement Automation™ Fault

RPT 523665.03 - Control Software, Supply Voltage (BAT) Too High

RPT 523665.04 - Control Software, Supply Voltage (BAT) Too Low

RPT 523666.03 - Control Software, Supply Voltage (BAT) Too High

RPT 523666.04 - Control Software, Supply Voltage (BAT) Too Low

RPT 523749.31 - INFORMATION FOR OPERATOR: Rear PTO Load Too High

RPT 523806.00 - Solenoid for PTO Speed 3, Current Overload Protection Active at PAP Control Software

RPT 523806.01 - Solenoid for PTO Speed 3, Supply Voltage Faulty at PAP Control Software

RPT 523806.03 - Solenoid for PTO Speed 3 On, Voltage Too High at PAP Control Software

RPT 523806.04 - Solenoid for PTO Speed 3 On, Current Too High at PAP Control Software

RPT 523806.05 - Solenoid for PTO Speed 3 On, No Current Present at PAP Control Software

RPT 523806.09 - Solenoid for PTO Speed 3, Incorrect CAN Bus Message from PAP Control Software

RPT 523806.11 - Solenoid for PTO Speed 3, Fault

RPT 523806.12 - Solenoid for PTO Speed 3 Off, Current Present at PAP Control Software

RPT 523806.19 - Solenoid for PTO Speed 3, Incorrect CAN Bus Message

RPT 523811.00 - Solenoid for PTO Speed 1, Current Overload Protection Active at PAP Control Software

RPT 523811.01 - Solenoid for PTO Speed 1, Supply Voltage Faulty at PAP Control Software

RPT 523811.03 - Solenoid for PTO Speed 1 On, Voltage Too High at PAP Control Software

RPT 523811.04 - Solenoid for PTO Speed 1 On, Current Too High at PAP Control Software

RPT 523811.05 - Solenoid for PTO Speed 1 On, No Current Present at PAP Control Software

RPT 523811.09 - Solenoid for PTO Speed 1, Incorrect CAN Bus Message from PAP Control Software

RPT 523811.11 - Solenoid for PTO Speed 1, Fault

RPT 523811.12 - Solenoid for PTO Speed 1 Off, Current Present at PAP Control Software

RPT 523811.19 - Solenoid for PTO Speed 1, Incorrect CAN Bus Message

RPT 523812.00 - Solenoid for PTO Speed 2, Current Overload Protection Active at PAP Control Software

RPT 523812.01 - Solenoid for PTO Speed 2, Supply Voltage Faulty at PAP Control Software

RPT 523812.03 - Solenoid for PTO Speed 2 On, Voltage Too High at PAP Control Software

RPT 523812.04 - Solenoid for PTO Speed 2 On, Current Too High at PAP Control Software

RPT 523812.05 - Solenoid for PTO Speed 2 On, No Current Present at PAP Control Software

RPT 523812.09 - Solenoid for PTO Speed 2, Incorrect CAN Bus Message from PAP Control Software

RPT 523812.11 - Solenoid for PTO Speed 2, Fault

RPT 523812.12 - Solenoid for PTO Speed 2 Off, Current Present at PAP Control Software

RPT 523812.19 - Solenoid for PTO Speed 2, Incorrect CAN Bus Message

RPT 523813.00 - Solenoid for PTO Speed 1, Current Overload Protection Active at PAP Control Software

RPT 523813.01 - Solenoid for PTO Speed 1, Supply Voltage Faulty at PAP Control Software

RPT 523813.03 - Solenoid for PTO Speed 1 On, Voltage Too High at PAP Control Software

RPT 523813.04 - Solenoid for PTO Speed 1 On, Current Too High at PAP Control Software

RPT 523813.05 - Solenoid for PTO Speed 1 On, No Current Present at PAP Control Software

RPT 523813.09 - Solenoid for PTO Speed 1, Incorrect CAN Bus Message from PAP Control Software

RPT 523813.11 - Solenoid for PTO Speed 1, Fault

RPT 523813.12 - Solenoid for PTO Speed 1 Off, Current Present at PAP Control Software

RPT 523813.19 - Solenoid for PTO Speed 1, Incorrect CAN Bus Message

RPT 523814.00 - Solenoid for PTO Speed 2, Current Overload Protection Active at PAP Control Software

RPT 523814.01 - Solenoid for PTO Speed 2, Supply Voltage Faulty at PAP Control Software

RPT 523814.03 - Solenoid for PTO Speed 2 On, Voltage Too High at PAP Control Software

RPT 523814.04 - Solenoid for PTO Speed 2 On, Current Too High at PAP Control Software

RPT 523814.05 - Solenoid for PTO Speed 2 On, No Current Present at PAP Control Software

RPT 523814.09 - Solenoid for PTO Speed 2, Incorrect CAN Bus Message from PAP Control Software

RPT 523814.11 - Solenoid for PTO Speed 2, Fault

RPT 523814.12 - Solenoid for PTO Speed 2 Off, Current Present at PAP Control Software

RPT 523814.19 - Solenoid for PTO Speed 2, Incorrect CAN Bus Message

RPT 523815.00 - Solenoid for PTO Speed 3, Current Overload Protection Active at PAP Control Software

RPT 523815.01 - Solenoid for PTO Speed 3, Supply Voltage Faulty at PAP Control Software

RPT 523815.03 - Solenoid for PTO Speed 3 On, Voltage Too High at PAP Control Software

RPT 523815.04 - Solenoid for PTO Speed 3 On, Current Too High at PAP Control Software

RPT 523815.05 - Solenoid for PTO Speed 3 On, No Current Present at PAP Control Software

RPT 523815.09 - Solenoid for PTO Speed 3, Incorrect CAN Bus Message from PAP Control Software

RPT 523815.11 - Solenoid for PTO Speed 3, Fault

RPT 523815.12 - Solenoid for PTO Speed 3 Off, Current Present at PAP Control Software

RPT 523815.19 - Solenoid for PTO Speed 3, Incorrect CAN Bus Message

RPT 523908.09 - Incorrect CAN Bus Message, Information from OIC Control Software

RPT 523908.14 - INFORMATION FOR OPERATOR: Remote Control Switch for Rear PTO is Activated

RPT 523908.19 - Remote Control Switch for Rear PTO, Malfunction

RPT 523908.31 - Remote Control Switch for Rear PTO, Malfunction

RPT 524218.09 - Incorrect CAN Bus Message, Information from PTA, PTD or PTQ Control Software

RPT 524218.19 - Park Position Signal Fault

RPT 524218.31 - Park Position Signal Fault

RPT 524224.02 - Rear PTO Switch, Malfunction

RPT 524224.09 - Incorrect CAN Bus Message, Information from OIC Control Software

RPT 524224.19 - Rear PTO switch, Fault

RPT 524224.31 - Rear PTO Switch, Malfunction

RPT 524252.04 - Rear PTO Solenoid Valve, Voltage Too Low

RPT 524252.05 - Rear PTO Solenoid Valve, Current Too Low

RPT 524252.14 - Rear PTO Solenoid Valve, Voltage Too High

RPT 524252.15 - Rear PTO Solenoid Valve, Current Too High

RPT 524252.17 - Rear PTO Solenoid Valve, Open Circuit

Group SB1: SB1 Control Software

SB1 000158.16 - Stepper Motor for E-SCV I, Voltage Too High

SB1 000158.18 - Stepper Motor for E-SCV I, Voltage Too Low

SB1 000628.02 - Stepper Motor for E-SCV I, Internal Error

SB1 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SB1 520255.09 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB1 520255.19 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB1 520256.00 - Control Software, Internal Error

SB1 520258.00 - Stepper Motor for E-SCV I, Temperature Too High

SB1 520258.01 - Stepper Motor for E-SCV I, Temperature Too Low

SB1 520259.02 - Stepper Motor for E-SCV I, Internal Error

SB1 520260.00 - Stepper Motor for E-SCV I, Current Too High

Group SB2: SB2 Control Software

SB2 000158.16 - Stepper Motor for E-SCV II, Voltage Too High

SB2 000158.18 - Stepper Motor for E-SCV II, Voltage Too Low

SB2 000628.02 - Stepper Motor for E-SCV II, Internal Error

SB2 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SB2 520255.09 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB2 520255.19 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB2 520256.00 - Control Software, Internal Error

SB2 520258.00 - Stepper Motor for E-SCV II, Temperature Too High

SB2 520258.01 - Stepper Motor for E-SCV II, Temperature Too Low

SB2 520259.02 - Stepper Motor for E-SCV II, Internal Error

SB2 520260.00 - Stepper Motor for E-SCV II, Current Too High

Group SB3: SB3 Control Software

SB3 000158.16 - Stepper Motor for E-SCV III, Voltage Too High

SB3 000158.18 - Stepper Motor for E-SCV III, Voltage Too Low

SB3 000628.02 - Stepper Motor for E-SCV III, Internal Error

SB3 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SB3 520255.09 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB3 520255.19 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB3 520256.00 - Control Software, Internal Error

SB3 520258.00 - Stepper Motor for E-SCV III, Temperature Too High

SB3 520258.01 - Stepper Motor for E-SCV III, Temperature Too Low

SB3 520259.02 - Stepper Motor for E-SCV III, Internal Error

SB3 520260.00 - Stepper Motor for E-SCV III, Current Too High

Group SB4: SB4 Control Software

SB4 000158.16 - Stepper Motor for E-SCV IV, Voltage Too High

SB4 000158.18 - Stepper Motor for E-SCV IV, Voltage Too Low

SB4 000628.02 - Stepper Motor for E-SCV IV, Internal Error

SB4 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SB4 520255.09 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB4 520255.19 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB4 520256.00 - Control Software, Internal Error

SB4 520258.00 - Stepper Motor for E-SCV IV, Temperature Too High

SB4 520258.01 - Stepper Motor for E-SCV IV, Temperature Too Low

SB4 520259.02 - Stepper Motor for E-SCV IV, Internal Error

SB4 520260.00 - Stepper Motor for E-SCV IV, Current Too High

Group SB5: SB5 Control Software

SB5 000158.16 - Stepper Motor for E-SCV V (E-SCV XIV), Voltage Too High

SB5 000158.18 - Stepper Motor for E-SCV V (E-SCV XIV), Voltage Too Low

SB5 000628.02 - Stepper Motor for E-SCV V (E-SCV XIV), Internal Error

SB5 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SB5 520255.09 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB5 520255.19 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB5 520256.00 - Control Software, Internal Error

SB5 520258.00 - Stepper Motor for E-SCV V (E-SCV XIV), Temperature Too High

SB5 520258.01 - Stepper Motor for E-SCV V (E-SCV XIV), Temperature Too Low

SB5 520259.02 - Stepper Motor for E-SCV V (E-SCV XIV), Internal Error

SB5 520260.00 - Stepper Motor for E-SCV V (E-SCV XIV), Current Too High

Group SB6: SB6 Control Software

SB6 000158.16 - Stepper Motor for E-SCV VI (E-SCV V), Voltage Too High

SB6 000158.18 - Stepper Motor for E-SCV VI (E-SCV V), Voltage Too Low

SB6 000628.02 - Stepper Motor for E-SCV VI (E-SCV V), Internal Error

SB4 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SB6 520255.09 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB6 520255.19 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SB6 520256.00 - Control Software, Internal Error

SB4 520258.00 - Stepper Motor for E-SCV VI (E-SCV V), Temperature Too High

SB6 520258.01 - Stepper Motor for E-SCV VI (E-SCV V), Temperature Too Low

SB6 520259.02 - Stepper Motor for E-SCV VI (E-SCV V), Internal Error

SB6 520260.00 - Stepper Motor for E-SCV VI (E-SCV V), Current Too High

Group SBJ: SBJ Control Software

SBJ 000158.16 - Stepper Motor for E-SCV X, Voltage Too High

SBJ 000158.18 - Stepper Motor for E-SCV X, Voltage Too Low

SBJ 000628.02 - Stepper Motor for E-SCV X, Internal Error

SBJ 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SBJ 520255.09 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBJ 520255.19 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBJ 520256.00 - Control Software, Internal Error

SBJ 520258.00 - Stepper Motor for E-SCV X, Temperature Too High

SBJ 520258.01 - Stepper Motor for E-SCV X, Temperature Too Low

SBJ 520259.02 - Stepper Motor for E-SCV XI, Internal Error

SBJ 520260.00 - Stepper Motor for E-SCV XI, Current Too High

Group SBK: SBK Control Software

SBK 000158.16 - Stepper Motor for E-SCV XI, Voltage Too High

SBK 000158.18 - Stepper Motor for E-SCV XI, Voltage Too Low

SBK 000628.02 - Stepper Motor for E-SCV XI, Internal Error

SBK 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SBK 520255.09 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBK 520255.19 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBK 520256.00 - Control Software, Internal Error

SBK 520258.00 - Stepper Motor for E-SCV XI, Temperature Too High

SBK 520258.01 - Stepper Motor for E-SCV XI, Temperature Too Low

SBK 520259.02 - Stepper Motor for E-SCV XI, Internal Error

SBK 520260.00 - Stepper Motor for E-SCV XI, Current Too High

Group SBL: SBL Control Software

SBL 000158.16 - Stepper Motor for E-SCV XII, Voltage Too High

SBL 000158.18 - Stepper Motor for E-SCV XII, Voltage Too Low

SBL 000628.02 - Stepper Motor for E-SCV XII, Internal Error

SBL 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SBL 520255.09 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBL 520255.19 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBL 520256.00 - Control Software, Internal Error

SBL 520258.00 - Stepper Motor for E-SCV XII, Temperature Too High

SBL 520258.01 - Stepper Motor for E-SCV XII, Temperature Too Low

SBL 520259.02 - Stepper Motor for E-SCV XII, Internal Error

SBL 520260.00 - Stepper Motor for E-SCV XII, Current Too High

Group SBM: SBM Control Software

SBM 000158.16 - Stepper Motor for E-SCV XIII, Voltage Too High

SBM 000158.18 - Stepper Motor for E-SCV XIII, Voltage Too Low

SBM 000628.02 - Stepper Motor for E-SCV XIII, Internal Error

SBM 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SBM 520255.09 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBM 520255.19 - CAN Bus Message Cannot be Received, Information from SCO Control Software

SBM 520256.00 - Control Software, Internal Error

SBM 520258.00 - Stepper Motor for E-SCV XIII, Temperature Too High

SBM 520258.01 - Stepper Motor for E-SCV XIII, Temperature Too Low

SBM 520259.02 - Stepper Motor for E-SCV XIII, Internal Error

SBM 520260.00 - Stepper Motor for E-SCV XIII, Current Too High

Group SBN: SBN Control Software

SBN 000158.16 - Stepper Motor for E-SCV XIV, Voltage Too High

SBN 000158.18 - Stepper Motor for E-SCV XIV, Voltage Too Low

SBN 000628.02 - Stepper Motor for E-SCV XIV, Internal Error

SBN 000630.02 - Replacement Stepper Motor with Default Parameter Set Installed

SBN 520255.09 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SBN 520255.19 - CAN Bus Message Cannot be Received, Information from SCC Control Software

SBN 520256.00 - Control Software, Internal Error

SBN 520258.00 - Stepper Motor for E-SCV XIV, Temperature Too High

SBN 520258.01 - Stepper Motor for E-SCV XIV, Temperature Too Low

SBN 520259.02 - Stepper Motor for E-SCV XIV, Internal Error

SBN 520260.00 - Stepper Motor for E-SCV XIV, Current Too High

Group SCC: SCC Control Software

SCC 000158.04 - Control Software, Supply Voltage (ELX) Too Low

SCC 000168.03 - Control Software, Supply Voltage (BAT) Too High

SCC 000168.04 - Control Software, Supply Voltage (BAT) Too Low

SCC 000237.02 - VIN Information, Mismatch

SCC 000237.12 - VIN Information, Mismatch

SCC 000237.14 - VIN Information, System Disabled

SCC 000237.31 - VIN Information, Incorrect

SCC 000629.12 - Control Software, Internal Error

SCC 000924.03 - Stepper Motors for E-SCV I, E-SCV II and E-SCV V (E-SCVXIV), Voltage Too High

SCC 000924.04 - Stepper Motors for E-SCV I, E-SCV II and E-SCV V (E-SCV XIV), Voltage Too Low

SCC 000925.03 - Stepper Motors for E-SCV III, E-SCV IV and E-SCV VI (E-SCV V), Voltage Too High

SCC 000925.04 - Stepper Motors for E-SCV III, E-SCV IV and E-SCV VI (E-SCV V), Voltage Too Low

SCC 002000.09 - Incorrect CAN BUS Message, Information from ECU Control Unit

SCC 002003.09 - CAN Bus Message Cannot Be Received, Information from PTA/PTQ or PTD Control Software

SCC 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

SCC 002034.09 - Incorrect CAN Bus Message, Information from SCO Control Software

SCC 002049.09 - Incorrect CAN BUS Message, Information from OIC Control Software

SCC 002071.09 - Incorrect CAN BUS Message, Information from CCU Control Software

SCC 002140.09 - Incorrect CAN BUS Message, Information from AIC Control Software

SCC 002161.09 - CAN Bus Message Cannot Be Received, Information from E-SCV I

SCC 002162.09 - CAN Bus Message Cannot Be Received, Information from E-SCV II

SCC 002163.09 - CAN Bus Message Cannot Be Received, Information from E-SCV III

SCC 002164.09 - CAN Bus Message Cannot Be Received, Information from E-SCV IV

SCC 002165.09 - CAN Bus Message Cannot Be Received, Information from E-SCV V

SCC 002166.09 - CAN Bus Message Cannot Be Received, Information from E-SCV VI

SCC 002174.09 - CAN Bus Message Cannot Be Received, Information from E-SCV XIV

SCC 002208.09 - Incorrect CAN Bus Message, Information from MFC Control Software

SCC 002213.09 - Incorrect CAN BUS Message, Information from SCO Control Software

SCC 003510.03 - 5-V Supply Voltage, Voltage Too High

SCC 003510.04 - 5-Volt Supply Voltage, Voltage Too Low

SCC 516451.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCC 516451.31 - Control Lever for E-SCV XV, Fault

SCC 516456.03 - Sensor for Suction Pressure (Charge Pump), Voltage Too High

SCC 516456.04 - Sensor for Suction Pressure (Charge Pump), Voltage Too Low

SCC 516456.18 - Sensor for Suction Pressure (Charge Pump), Pressure Too Low

SCC 516457.14 - Control Software, Internal Fault

SCC 516741.03 - Commutation Valve for Front Hitch (Rerouting the Oil from Coupler XIV to Coupler XV, Voltage Too High

SCC 516741.05 - Commutation Valve for Front Hitch (Rerouting the Oil from Coupler XIV to Coupler XV, Current Too Low

SCC 516741.06 - Commutation Valve for Front Hitch (Rerouting the Oil from Coupler XIV to Coupler XV, Current Too High

SCC 517342.31 - Control Lever Fault

SCC 517343.31 - Multi-Function Lever Fault

SCC 517344.31 - CommandPRO™ Joystick, Fault

SCC 521000.02 - Left Remote Control Switch for E-SCVs, Fault

SCC 522390.09 - Incorrect CAN BUS Message, Information from Implement

SCC 522390.11 - Tractor-Implement Automation™, Malfunction

SCC 523218.03 - Output for E-SCV III, E-SCV IV and E-SCV VI, Voltage Too High

SCC 523218.04 - Output for E-SCV III, E-SCV IV and E-SCV VI, Voltage Too Low

SCC 523219.03 - Output for E-SCV I, E-SCV II and E-SCV V, Voltage Too High

SCC 523219.04 - Output for E-SCV I, E-SCV II and E-SCV V, Voltage Too Low

SCC 523333.02 - Right Remote Control Switch for E-SCVs, Fault

SCC 523693.02 - Control Lever for E-SCV I, Fault

SCC 523693.09 - CAN Bus Message Cannot Be Received, Information from AIC Control Software

SCC 523693.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCC 523694.02 - Control Lever for E-SCV II, Fault

SCC 523694.09 - CAN Bus Message Cannot Be Received, Information from AIC Control Software

SCC 523694.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCC 523695.02 - Control Lever for E-SCV V, Fault

SCC 523695.09 - CAN Bus Message Cannot Be Received, Information from AIC Control Software

SCC 523695.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCC 523696.02 - Control Lever for E-SCV VI, Fault

SCC 523696.09 - CAN Bus Message Cannot Be Received, Information from AIC Control Software

SCC 523696.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCC 523775.31 - Multi-Function Lever, E-SCV Activation Switch, Fault

SCC 523910.02 - Control Software, Internal Error

SCC 524015.02 - Control Lever for E-SCV III, Fault

SCC 524015.09 - CAN Bus Message Cannot Be Received, Information from AIC Control Software

SCC 524015.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCC 524038.02 - Control Lever for E-SCV IV, Fault

SCC 524038.09 - CAN Bus Message Cannot Be Received, Information from AIC Control Software

SCC 524038.19 - Incorrect CAN Bus Message, Information from AIC Control Software

Group SCO: SCO Control Software

SCO 000084.14 - INFORMATION FOR OPERATOR: Travel Speed Too High

SCO 000084.19 - Wheel Speed Sensor, Fault

SCO 000158.04 - Control Software, Supply Voltage (ELX) Too Low

SCO 000168.03 - Control Software, Supply Voltage (BAT) Too High

SCO 000168.04 - Control Software, Supply Voltage (BAT) Too Low

SCO 000177.02 - Hydraulic Oil Temperature Too Low During Front Hitch Calibration

SCO 000190.02 - INFORMATION FOR OPERATOR: Engine Speed Too Low During Front Hitch Calibration

SCO 000190.09 - Incorrect CAN BUS Message, Information from ECU Control Unit

SCO 000190.19 - Engine Speed Sensor Fault

SCO 000628.02 - Control Software, Internal Error

SCO 000629.12 - Control Software, Internal Error

SCO 000924.03 - Stepper Motors for E-SCV X and E-SCV XI, Supply Voltage Too High

SCO 000924.04 - Stepper Motors for E-SCV X and E-SCV XI, Supply Voltage Too Low

SCO 000925.03 - Stepper Motor for E-SCV XII, Supply Voltage Too High

SCO 000925.04 - Stepper Motor for E-SCV XII, Supply Voltage Too Low

SCO 000926.03 - Stepper Motor for E-SCV XIII and E-SCV XIV, Supply Voltage Too High

SCO 000926.04 - Stepper Motor for E-SCV XIII and E-SCV XIV, Supply Voltage Too Low

SCO 001872.02 - Calibration Not Successful

SCO 001872.03 - Front Hitch Position Sensor, Voltage Too High

SCO 001872.04 - Front Hitch Position Sensor, Voltage Too Low

SCO 001872.16 - Front Hitch Position Sensor, Voltage Too High

SCO 001872.18 - Front Hitch Position Sensor, Voltage Too Low

SCO 002000.09 - Incorrect CAN BUS Message, Information from ECU Control Unit

SCO 002003.09 - CAN Bus Message Cannot Be Received, Information from PTA/PTQ or PTD Control Software

SCO 002006.09 - CAN Bus Message Cannot Be Received, Information from EIC Control Software

SCO 002034.09 - Incorrect CAN Bus Message, Information from SCC Control Software

SCO 002049.09 - Incorrect CAN BUS Message, Information from OIC Control Software

SCO 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

SCO 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

SCO 002140.09 - Incorrect CAN BUS Message, Information from AIC Control Software

SCO 002170.09 - CAN Bus Message Cannot Be Received, Information from E-SCV X

SCO 002171.09 - CAN Bus Message Cannot Be Received, Information from E-SCV XI

SCO 002172.09 - CAN Bus Message Cannot Be Received, Information from E-SCV XII

SCO 002173.09 - CAN Bus Message Cannot Be Received, Information from E-SCV XIII

SCO 002174.09 - CAN Bus Message Cannot Be Received, Information from E-SCV XIV

SCO 002208.09 - Incorrect CAN Bus Message, Information from MFC Control Software

SCO 003509.03 - 5-V Supply Voltage, Voltage Too High

SCO 003509.04 - 5-V Supply Voltage, Voltage Too Low

SCO 516122.03 - Stepper Motor for E-SCV X, Supply Voltage Too High

SCO 516122.05 - Stepper Motor for E-SCV X, Current Too Low

SCO 516122.06 - Stepper Motor for E-SCV X, Current Too High

SCO 516457.14 - Control Software, Internal Fault

SCO 516741.03 - Commutation Valve (E-SCV XIV and E-SCV XV), Voltage Too High

SCO 516741.05 - Commutation Valve (E-SCV XIV and E-SCV XV), Current Too Low

SCO 516741.06 - Commutation Valve (E-SCV XIV and E-SCV XV), Current Too High

SCO 516814.03 - Diverter Valve / Memo Function, Voltage Too High

SCO 516814.06 - Diverter Valve / Memo Function, Current Too High

SCO 516816.03 - Valve for Hitch Dampening, Voltage Too High

SCO 516816.05 - Valve for Hitch Dampening, Current Too Low

SCO 516816.06 - Valve for Hitch Dampening, Current Too High

SCO 517127.19 - Loader Boom Position Sensor Fault

SCO 517128.19 - Loader Bucket Position Sensor, Fault

SCO 517342.31 - Control Lever Fault

SCO 517343.31 - Multi-Function Lever Fault

SCO 520529.03 - Loader Boom Position Sensor (Channel 1), Voltage Too High

SCO 520529.04 - Loader Boom Position Sensor (Channel 1) Voltage Too Low

SCO 520529.07 - Loader Boom Position Sensor Fault

SCO 520529.12 - Loader Boom Position Sensor Fault

SCO 520529.13 - Control Software Not Calibrated

SCO 520529.14 - Return-to-Position Function Not Calibrated

SCO 520529.16 - Loader Boom Position Sensor Value Too High

SCO 520529.18 - Loader Boom Position Sensor Value Too Low

SCO 520529.31 - Loader Boom Position Sensor, Voltage Ratio Between Channel 1 and Channel 2 Not Correct

SCO 520530.03 - Loader Boom Position Sensor (Channel 2), Voltage Too High

SCO 520530.04 - Loader Boom Position Sensor (Channel 2), Voltage Too Low

SCO 520530.14 - Settings for Front Loader Incorrect

SCO 520531.03 - Loader Bucket Position Sensor, Voltage Too High

SCO 520531.04 - Loader Bucket Position Sensor, Voltage Too Low

SCO 520531.07 - Loader Bucket Position Sensor Fault

SCO 520531.11 - Loader Bucket Position Sensor Fault

SCO 520531.12 - Loader Bucket Position Sensor Fault

SCO 520531.14 - Return-to-Position Function Fault

SCO 520531.16 - Loader Bucket Position Sensor Angle Too High

SCO 520531.17 - Loader Bucket Position Sensor Value Too Low

SCO 520531.18 - Loader Bucket Position Sensor Value Too High

SCO 520873.02 - Control Software, Internal Error

SCO 520874.02 - Control Software, Internal Error

SCO 520893.02 - Control Software, Internal Error

SCO 521401.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCO 521401.31 - Control Lever for E-SCV X, Fault

SCO 521404.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCO 521404.31 - Control Lever for E-SCV XI, Fault

SCO 521405.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCO 521405.31 - Control Lever for E-SCV XII, Fault

SCO 521406.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCO 521406.31 - Control Lever for E-SCV XIII, Fault

SCO 521407.19 - Incorrect CAN Bus Message, Information from AIC Control Software

SCO 521407.31 - Control Lever for E-SCV XIV, Fault

SCO 522390.09 - Incorrect CAN BUS Message, Information from Implement

SCO 522390.11 - Tractor-Implement Automation™ Fault

SCO 523216.03 - E-SCV X and E-SCV XI, Voltage Too High

SCO 523216.04 - E-SCV X and E-SCV XI, Voltage Too Low

SCO 523217.03 - E-SCV XII, Voltage Too High

SCO 523217.04 - E-SCV XII, Voltage Too Low

SCO 523218.03 - E-SCV XIII and E-SCV XIV, Voltage Too High

SCO 523218.04 - E-SCV XIII and E-SCV XIV, Voltage Too Low

SCO 523272.02 - Remote Control Switch of Front Hitch, Fault

SCO 523343.19 - Incorrect CAN Bus Message, Information from MFC Control Software

SCO 523775.19 - Multi-Function Lever, E-SCV Activation Switch, Fault

SCO 523775.31 - Multi-Function Lever, E-SCV Activation Switch, Fault

SCO 523804.19 - Multi-Function Lever (Potentiometer) Function 2, Fault

SCO 523805.19 - Incorrect CAN Bus Message, Information from MFC Control Software

SCO 523827.14 - CAN Bus Message Cannot Be Received, Information from E-SCV XIII

SCO 523828.14 - CAN Bus Message Cannot Be Received, Information from E-SCV XII

SCO 523829.13 - Return-to-Position Function Not Calibrated

SCO 523910.02 - Control Software, Internal Error

Group SFA: SFA Control Software

SFA 000084.15 - Wheel Speed Detected During Calibration

SFA 000084.19 - Incorrect CAN Bus Message, Wheel Speed Signal Incorrect

SFA 000158.03 - Front Chassis Control Unit, Supply Voltage (ELX) Too High

SFA 000158.04 - Front Chassis Control Unit, Supply Voltage (ELX) Too Low

SFA 000168.03 - Front Chassis Control Unit, Supply Voltage (BAT) Too High

SFA 000168.04 - Front Chassis Control Unit, Supply Voltage (BAT) Too Low

SFA 000190.17 - Incorrect CAN Bus Message, Engine Speed Too Low

SFA 000190.19 - Incorrect CAN Bus Message, Engine Speed Not Detected

SFA 000237.02 - VIN Information, Mismatch

SFA 000237.12 - VIN Information, Internal Fault

SFA 000237.14 - VIN Information, System Disabled

SFA 000237.31 - VIN Information, Incorrect

SFA 000628.02 - Control Software, Internal Fault

SFA 000628.12 - Control Software, Internal Fault

SFA 000629.12 - Control Software, Internal Fault

SFA 000630.13 - Data Storage Fault

SFA 000630.31 - Control Software Not Calibrated

SFA 000639.12 - Vehicle CAN Bus, Internal Error

SFA 000639.14 - Vehicle CAN Bus, Very High Error Rate

SFA 001865.19 - Incorrect CAN Bus Message, Key Switch Status Incorrect

SFA 001881.19 - Incorrect CAN Bus Message, Draft Sensor from HCC Control Software

SFA 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

SFA 002035.09 - Incorrect CAN Bus Message, Information from HCC Control Software

SFA 002047.09 - Incorrect CAN Bus Message, Information from CSC Control Software

SFA 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

SFA 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

SFA 003509.03 - 5-V Supply Voltage to Sensor for Suspended Front-Wheel Drive Axle, Voltage Too High

SFA 003509.04 - 5-V Supply Voltage to Sensor for Suspended Front-Wheel Drive Axle, Voltage Too Low

SFA 003509.06 - 5-V Supply Voltage to Sensor for Suspended Front-Wheel Drive Axle, Current Too High

SFA 520425.07 - Reception of CAN Bus Message, Fault

SFA 520426.07 - Transmitting CAN Bus Message, Fault

SFA 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

SFA 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

SFA 520870.02 - Control Software, Internal Error

SFA 520870.13 - Suspended Front-Wheel Drive Axle, Error During Calibration

SFA 520871.02 - Control Software, Internal Error

SFA 520871.13 - Control Software, Internal Error

SFA 520892.02 - Control Software, Internal Error

SFA 523368.02 - Control Software, Internal Error

SFA 523666.03 - Supply Voltage of Front Chassis Control Unit, Voltage Too High

SFA 523666.04 - Supply Voltage of Front Chassis Control Unit, Voltage Too Low

SFA 523847.03 - Solenoid Valve for Pressure Build-Up of Suspended Front-Wheel Drive Axle, Voltage Too High

SFA 523847.05 - Solenoid Valve for Pressure Build-Up of Suspended Front-Wheel Drive Axle, Current Too Low

SFA 523847.06 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Build-up, Current Too High

SFA 523948.03 - Solenoid Valve for Lowering the Suspended Front-Wheel Drive Axle, Voltage Too High

SFA 523948.05 - Suspended Front-Wheel Drive Axle Lower Solenoid Valve, Current Too Low

SFA 523948.06 - Suspended Front-Wheel Drive Axle Lower Solenoid Valve, Current Too High

SFA 523949.03 - Suspended Front-Wheel Drive Axle Raise Solenoid Valve, Voltage Too High

SFA 523949.05 - Suspended Front-Wheel Drive Axle Raise Solenoid Valve, Current Too Low

SFA 523949.06 - Suspended Front-Wheel Drive Axle Raise Solenoid Valve, Current Too High

SFA 523951.02 - Calibration of the Suspended Front-Wheel Drive Axle, Front-Wheel Drive Axle Moves in Wrong Direction

SFA 523951.10 - Calibration of Suspended Front-Wheel Drive Axle, Fault

SFA 523951.13 - Suspended Front-Wheel Drive Axle Not Calibrated

SFA 523951.14 - Suspended Front-Wheel Drive Axle Not Calibrated

SFA 523951.15 - Pressure Reduction During Calibration of Suspended Front-Wheel Drive Axle, Bottom Position Not Reached

SFA 523964.03 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Reduction, Voltage Too High

SFA 523964.05 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Reduction, Current Too Low

SFA 523964.06 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Reduction, Current Too High

SFA 523965.14 - INFORMATION FOR OPERATOR: Suspended Front-Wheel Drive Axle Disabled

SFA 523965.31 - Activation of Manual Mode Failed

SFA 523974.02 - Pressure Change in the Wrong Direction (While Testing Oil Pressure Sensor of Suspended Front-Wheel Drive Axle)

SFA 523974.03 - Oil Pressure Sensor of Suspended Front-Wheel Drive Axle, Voltage Too High

SFA 523974.04 - Oil Pressure Sensor of Suspended Front-Wheel Drive Axle, Voltage Too Low

SFA 523974.14 - Required Standard Pressure Could Not Be Achieved

SFA 523974.16 - Required Minimum Pressure Could Not Be Achieved

SFA 523974.18 - Required Maximum Pressure Could Not be Achieved

SFA 523975.03 - Suspended Front-Wheel Drive Axle All the Way Down, Voltage Too High (During Calibration)

SFA 523975.04 - Suspended Front-Wheel Drive Axle All the Way Up, Voltage Too Low (During Calibration)

SFA 523975.13 - Suspended Front-Wheel Drive Axle in Level Position, Voltage Out of Tolerance (During Calibration)

SFA 523976.03 - Suspended Front-Wheel Drive Axle Position Sensor, Voltage Too High

SFA 523976.04 - Suspended Front-Wheel Drive Axle Position Sensor, Voltage Too Low

SFA 523976.31 - INFORMATION FOR OPERATOR: Suspended Front-Wheel Drive Axle Does Not Reach Level Position in Required Time

SFA 524055.02 - Front Chassis Control Unit, Internal Error

SFA 524157.19 - Incorrect CAN Bus Message, Status of Right Brake Pedal from OIC Control Software

SFA 524162.19 - Incorrect CAN Bus Message, Status of Left Brake Pedal from OIC Control Software

SFA 524198.02 - Front Chassis Control Unit, Internal Error

Group TEC: TEC Control Software

TEC 000628.12 - Control Software, Internal Error

TEC 000629.12 - Control Software, Internal Error

TEC 000630.02 - Control Software, Internal Error

TEC 000630.14 - Control Software, Internal Error

TEC 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

TEC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

TEC 001231.12 - Implement CAN Bus, High Error Rate

TEC 001231.14 - Implement CAN Bus, Very High Error Rate

TEC 003213.12 - Additional Input Devices, Fault

TEC 520425.07 - Received CAN Bus Messages, High Error Rate

TEC 520426.07 - Transmitted CAN Bus Messages, High Error Rate

TEC 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

TEC 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

TEC 522550.14 - No ISO - compatible implement connected to CAN-BUS implement

Group TEI: TEI Control Software

TEI 000628.12 - Control Software, Internal Error

TEI 000629.12 - Control Software, Internal Error

TEI 000630.02 - Control Software, Internal Error

TEI 000630.14 - Control Software, Internal Error

TEI 000639.12 - 500 kBd Vehicle CAN BUS, High Error Rate

TEI 000639.14 - Vehicle CAN BUS (500 kBd), Very High Error Rate

TEI 001231.12 - ISOBUS, Implement, High Error Rate

TEI 001231.14 - ISOBUS, Implement, Very High Error Rate

TEI 003213.12 - Additional Input Devices, Fault

TEI 520425.07 - Received CAN Bus Messages, High Error Rate

TEI 520426.07 - Transmitted CAN Bus Messages, High Error Rate

TEI 520542.03 - Vehicle CAN Bus (500 kBd), Voltage Too High

TEI 520543.04 - Vehicle CAN Bus (500 kBd), Voltage Too Low

TEI 522550.14 - No ISO - compatible implement connected to CAN-BUS implement

Group TIA: TIA Control Software

TIA 000091.02 - Foot Throttle Potentiometer, Voltages at Channel 1 and Channel 2 Not in the Correct Ratio

TIA 000091.03 - Foot Throttle Potentiometer, Voltage at Channel 1 Too High

TIA 000091.04 - Foot Throttle Potentiometer, Voltage at Channel 1 Too Low

TIA 000190.01 - INFORMATION FOR OPERATOR: Engine Speed Too Low

TIA 000191.19 - Incorrect CAN Bus Message, Transmission Output Speed from PTA Control Software

TIA 000237.02 - VIN Information, Mismatch

TIA 000237.14 - VIN Information, System Disabled

TIA 000237.31 - VIN Information, Incorrect

TIA 000587.31 - Control Software Incorrectly Configured

TIA 000598.31 - Transmission Enable Circuit Faulty

TIA 000606.16 - Engine Speed Too High

TIA 000628.02 - Control Software, Internal Error

TIA 000629.12 - Control Software, Internal Error

TIA 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

TIA 000974.02 - Hand Throttle Potentiometer, Voltages at Channel 1 and Channel 2 Not in the Correct Ratio

TIA 000974.03 - Hand Throttle Potentiometer, Voltage at Channel 1 Too High

TIA 000974.04 - Hand Throttle Potentiometer, Voltage at Channel 1 Too Low

TIA 001504.19 - Incorrect CAN Bus Message, Signal of the Operator Presence Switch from OIC Control Software

TIA 001504.30 - Operator Presence Switch, Signal Faulty

TIA 001504.31 - INFORMATION FOR OPERATOR: Power Zero Preselected without Valid Operator Presence Signal

TIA 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

TIA 002003.07 - Incorrect CAN BUS Message, Engine Speed and Transmission Input Speed

TIA 002003.09 - Incorrect CAN Bus Message, Information from PTA Control Software

TIA 002019.09 - Incorrect CAN Bus Message, Information from XSC Control Software

TIA 002020.09 - Incorrect CAN Bus Message, Information from SFA Control Software

TIA 002033.09 - Incorrect CAN Bus Message, Information from PDU Control Software

TIA 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

TIA 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

TIA 002145.09 - Incorrect CAN Bus Message, Information from FCC Control Software

TIA 002221.09 - Incorrect CAN Bus Message, Information from PLC Control Software

TIA 002255.09 - Incorrect CAN Bus Message, Information from RLC Control Software

TIA 002826.31 - Reverse Drive Lever, Positions Actuated Simultaneously

TIA 002828.31 - Reverse Drive Lever, Positions Actuated Simultaneously for Too Long a Period

TIA 003032.02 - Sensor Unit for Right Brake Pedal, Malfunction

TIA 003033.02 - Sensor Unit for Left Brake Pedal, Malfunction

TIA 003509.02 - 5-Volt Supply Voltage Faulty

TIA 003509.03 - 5-Volt Supply Voltage, Voltage Too High

TIA 003509.04 - 5-Volt Supply Voltage, Voltage Too Low

TIA 004310.09 - Incorrect CAN Bus Message, Information from Implement

TIA 004310.11 - Tractor-Implement Automation™, Malfunction

TIA 004310.14 - Tractor-Implement Automation™ Deactivated

TIA 520283.14 - INFORMATION FOR OPERATOR: Move Reverse Drive Lever to Neutral Position

TIA 522149.31 - INFORMATION FOR OPERATOR: Travel Speed Reduced

TIA 522390.09 - Incorrect CAN Bus Message, Information from Implement

TIA 522390.11 - Tractor-Implement Automation™, Malfunction

TIA 522431.11 - Control Software, Internal Error

TIA 522652.02 - Control Software, Internal Error

TIA 523438.02 - Control Software, Internal Error

TIA 523953.02 - Potentiometer for Speed Control Lever, Voltages at Channel 1 and Channel 2 not in the Correct Ratio

TIA 523956.31 - INFORMATION FOR OPERATOR: Engine Cut Out - Reverse Drive Lever Still in Forward or Reverse Position

TIA 523957.31 - INFORMATION FOR OPERATOR: Tractor Start with Reverse Drive Lever Not in Park Lock or Neutral Position

TIA 523959.31 - Error in Transmission

TIA 523960.31 - INFORMATION FOR OPERATOR: Forward or Reverse Position Preselected without Valid Operator Presence Signal

TIA 523961.02 - Park Lock cannot be Disengaged

TIA 523961.07 - Park Lock, Fault

TIA 523961.12 - Park Lock, Malfunction (Ground Speed Detected with Park Lock Engaged)

TIA 523962.31 - Front-Wheel Drive Axle Speed Sensor, Signal does Not Match Transmission Output Speed

TIA 523966.11 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Restart Engine

TIA 523966.14 - INFORMATION FOR OPERATOR: Tractor in Come Home Mode, Select a Direction of Travel

TIA 523966.31 - INFORMATION FOR OPERATOR: Tractor in Come Home Mode, Select Neutral or Park Lock Position

TIA 523967.02 - Sensor Unit for Speed Control Lever, Malfunction in Speed Band 1

TIA 524019.31 - INFORMATION FOR OPERATOR: Reverse Driver Lever Engaged in Neutral Position For Too Long

TIA 524020.31 - INFORMATION FOR OPERATOR: Reverse Drive Lever in Forward or Reverse Position During the Start Procedure

TIA 524032.01 - Reverse Drive Lever, Forward or Reverse Position and Power Zero Position Faulty

TIA 524032.04 - Reverse Drive Lever, Forward or Reverse Position Faulty

TIA 524109.19 - Incorrect CAN BUS Message, Transmission Output Speed from PTA Control Software and PLC Control Software

TIA 524173.02 - Clutch Pedal Potentiometer, Voltages at Channel 1 and Channel 2 not in the Correct Ratio

TIA 524173.07 - Clutch Pedal Potentiometer, Adjustment Error

TIA 524180.07 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Press Clutch to Stop

TIA 524180.14 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Fully Press Clutch Pedal

TIA 524180.31 - INFORMATION FOR OPERATOR: Tractor in Come-Home Mode, Release Clutch Pedal

TIA 524188.01 - Control Software, Internal Error

TIA 524190.14 - INFORMATION FOR OPERATOR: Anti-Jack-Knife Control Activated

TIA 524193.14 - INFORMATION FOR OPERATOR: Transmission Warm-up Routine Active

TIA 524230.06 - Transmission Enable Signal, Current Too High

TIA 524254.02 - Transmission Enable Relay, Fault

TIA 524254.31 - Transmission Enable Relay, Fault

TIA 524264.02 - Control Software, Internal Error

Group TID: TID Control Software

TID 000190.18 - INFORMATION FOR OPERATOR: Engine Speed Too Low

TID 002000.09 - Incorrect CAN BUS Message, Information from ECU Control Software

TID 002003.09 - Incorrect CAN Bus Message, Information from PTD Control Software

TID 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

TID 002007.09 - Incorrect CAN Bus Message, Information from RPT Control Software

TID 002019.09 - Incorrect CAN Bus Message, Information from XSC Control Software

TID 002020.09 - Incorrect CAN BUS Message, Information from SFA Control Software

TID 002035.09 - Incorrect CAN BUS Message, Information from HCC Control Software

TID 002036.09 - Incorrect CAN BUS Message, Information from PTF Control Software

TID 002049.09 - Incorrect CAN BUS Message, Information from OIC Control Software

TID 002071.09 - Incorrect CAN BUS Message, Information from CCU Control Software

TID 002140.09 - Incorrect CAN BUS Message, Information from AIC Control Software

TID 002145.09 - Incorrect CAN BUS Message, Information from FCC Control Software

TID 002161.09 - Incorrect CAN Bus Message, Information from SV1 Control Software

TID 002820.31 - Operator Presence System, Fault

TID 520870.02 - Control Software, Internal Error

TID 520871.02 - Control Software, Internal Error

TID 520872.02 - Control Software, Internal Error

TID 520958.14 - INFORMATION FOR OPERATOR: Shifting Transmission Not Permitted

TID 520958.31 - INFORMATION FOR OPERATOR: Shifting Transmission Not Permitted, Maximum Travel Speed Will Be Exceeded

TID 520959.14 - INFORMATION FOR OPERATOR: Shifting Transmission Not Permitted, Operator Not Present

TID 522149.14 - Travel Speed Reduced

TID 522149.31 - Travel Speed Reduced

TID 522390.09 - Incorrect CAN BUS Message, Information from Implement

TID 522390.11 - Tractor-Implement Automation™ Fault

TID 523922.31 - Emergency Brake, Fault

TID 524173.02 - Clutch Pedal Potentiometer Fault

TID 524230.06 - Transmission Enable Circuit, Current Too High

TID 526254.03 - Transmission Enable Circuit, Voltage Too High

TID 526254.04 - Transmission Enable Circuit, Voltage Too Low

TID 524277.00 - INFORMATION FOR OPERATOR: Reduce Engine Speed To Allow Downshifting

Group TIQ: TIQ Control Software

TIQ 000177.17 - Transmission Oil Temperature Too Low

TIQ 000190.01 - Engine Speed Out of Valid Range Low

TIQ 000525.07 - Wheel Speed Sensor, Fault

TIQ 000628.02 - Control Software, Internal Error

TIQ 000628.12 - Control Software, Internal Error

TIQ 000629.12 - Control Software, Internal Error

TIQ 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

TIQ 001745.14 - CAN Bus Fault, Driving of Vehicle is Limited

TIQ 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

TIQ 002003.09 - Incorrect CAN Bus Message, Information from PTQ Control Software

TIQ 002006.09 - Incorrect CAN Bus Message, Information from EIC Control Software

TIQ 002007.09 - Incorrect CAN Bus Message, Information from RPT Control Software

TIQ 002019.09 - Incorrect CAN Bus Message, Information from XSC Control Software

TIQ 002020.09 - Incorrect CAN Bus Message, Information from SFA Control Software

TIQ 002035.09 - Incorrect CAN Bus Message, Information from HCC Control Software

TIQ 002036.09 - Incorrect CAN Bus Message, Information from PTF Control Software

TIQ 002049.09 - Incorrect CAN Bus Message, Information from OIC Control Software

TIQ 002071.09 - Incorrect CAN Bus Message, Information from CCU Control Software

TIQ 002139.09 - Incorrect CAN Bus Message, Information from CSM Control Software

TIQ 002140.09 - Incorrect CAN Bus Message, Information from AIC Control Software

TIQ 002145.09 - Incorrect CAN Bus Message, Information from FCC Control Software

TIQ 002161.09 - Incorrect CAN Bus Message, Information from SV1

TIQ 002820.31 - INFORMATION FOR OPERATOR: Operator Presence Switch Not Activated

TIQ 520870.02 - Control Software, Internal Error

TIQ 520871.02 - Control Software, Internal Error

TIQ 520958.14 - INFORMATION FOR OPERATOR: Speed Change Due to Active Speed Limit Not Possible

TIQ 520958.31 - INFORMATION FOR OPERATOR: Speed Change Due to Active Speed Limit Not Possible

TIQ 520959.14 - INFORMATION FOR OPERATOR: No valid signal from operator presence switch during shifting

TIQ 522149.14 - Reduced Ground Speed, Fault

TIQ 522149.31 - INFORMATION FOR OPERATOR: Reduced Ground Speed

TIQ 522390.09 - Incorrect CAN Bus Message, Information from Implement

TIQ 522390.11 - Tractor-Implement Automation Deactivated

TIQ 523677.02 - INFORMATION FOR OPERATOR: Declutch Switch on Range-Shift Lever Fault

TIQ 523677.14 - INFORMATION FOR OPERATOR: Declutch Switch On Range-Shift Lever Activated/Not Activated

TIQ 523922.31 - INFORMATION FOR OPERATOR: Park Brake Engaged but Vehicle is Moving

TIQ 523961.07 - Park Lock, Fault

TIQ 523966.31 - Tractor in "come home" mode - INFORMATION FOR OPERATOR: Reverse drive lever in position for neutral or park

TIQ 524020.31 - INFORMATION FOR OPERATOR: Reverse Drive Lever is in the Position for Forward or Reverse Travel During Start-Up

TIQ 524173.18 - INFORMATION FOR OPERATOR: Clutch Pedal Not Actuated Properly

TIQ 524230.06 - Transmission Enable Valve, Current Too High

TIQ 524254.03 - Transmission Enable Circuit, Voltage Too High

TIQ 524254.04 - Transmission Enable Circuit, Voltage Too Low

TIQ 524277.00 - INFORMATION FOR OPERATOR: Engine speed too high for downshifting

TIQ 524279.31 - INFORMATION FOR OPERATOR: Operator Presence Switch Not Activated While Transmission Is In Neutral

Group VLC: VLC Control Software

VLC 000237.02 - VIN Information, Mismatch

VLC 000237.12 - VIN Information, Incorrect

VLC 000237.14 - VIN Information, System Disabled

VLC 000237.31 - VIN Information, Incorrect

VLC 000444.03 - Control Software, Supply Voltage (BAT at Terminal J4) Too High

VLC 000444.04 - Control Software, Supply Voltage (BAT at Terminal J4) Too Low

VLC 000444.06 - Control Software, Current (Pin J4) Too High

VLC 000628.02 - Control Software, Internal Error

VLC 000628.12 - Control Software, Internal Error

VLC 000629.12 - Control Software, Internal Error

VLC 000630.13 - Control Software, Internal Fault

VLC 000630.31 - Control Software Internal Fault

VLC 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

VLC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

VLC 002000.09 - Incorrect CAN Bus Message, Information from ECU Control Software

VLC 002040.09 - Incorrect CAN Bus Message, Information from PDU Control Software

VLC 002047.09 - Incorrect CAN Bus Message, Information from CCU Control Software

VLC 002049.09 - Incorrect CAN BUS Message, Information from OIC Control Software

VLC 002050.09 - Incorrect CAN BUS Message, Information from CLC Control Software

VLC 002055.09 - Incorrect CAN BUS Message, Information from RLC Control Software

VLC 002145.09 - Incorrect CAN BUS Message, Information from FCC Control Software

VLC 002149.06 - Control Software, Current Too High

VLC 002240.09 - Incorrect CAN Bus Message, Information from TEC Control Software

VLC 002348.03 - High-Beam Headlights, Voltage Too High

VLC 002348.05 - High-Beam Headlights, Current Too Low

VLC 002348.06 - High-Beam Headlights, Current Too High

VLC 002350.03 - Low-Beam Headlights, Voltage Too High

VLC 002350.05 - Low-Beam Headlights, Current Too Low

VLC 002350.06 - Low-Beam Headlights, Current Too High

VLC 002368.03 - Left Turn Signal Light on Implement, Voltage Too High

VLC 002368.06 - Left Turn Signal Light on Implement, Current Too High

VLC 002370.03 - Right Turn Signal Light on Implement, Voltage Too High

VLC 002370.06 - Right Turn Signal Light on Implement, Current Too High

VLC 002372.03 - Brake Light on Implement, Voltage Too High

VLC 002372.06 - Brake Light on Implement, Current Too High

VLC 003598.04 - Wakeup Signal, Voltage Too Low

VLC 520425.07 - Received CAN Bus Messages, High Error Rate

VLC 520426.07 - Transmitted CAN Bus Messages, High Error Rate

VLC 520542.03 - Vehicle CAN BUS (500 kBd), Voltage Too High

VLC 520543.04 - Vehicle CAN BUS (500 kBd), Voltage Too Low

VLC 520870.02 - Control Software, Internal Error

VLC 521533.03 - Left Front Corner Worklight, Voltage Too High

VLC 521533.05 - Left Front Corner Worklight, Current Too Low

VLC 521533.06 - Left Front Corner Worklight, Current Too High

VLC 521550.03 - Right Front Corner Worklight, Voltage Too High

VLC 521550.05 - Right Front Corner Worklight, Current Too Low

VLC 521550.06 - Right Front Corner Worklight, Current Too High

VLC 521835.20 - Control Software VLC, Ground Contact Fault

VLC 522311.03 - Pump for Rear Window Washer, Voltage Too High

VLC 522311.05 - Pump for Rear Window Washer, Current Too Low

VLC 522311.06 - Pump for Rear Window Washer, Current Too High

VLC 522312.03 - Pump for Windshield Washer, Voltage Too High

VLC 522312.05 - Pump for Windshield Washer, Current Too Low

VLC 522312.06 - Pump for Windshield Washer, Current Too High

VLC 524259.00 - Rear Chassis Control Unit, Temperature Too High

VLC 524259.15 - Rear Chassis Control Unit, Temperature Too High

VLC 524259.16 - Rear Chassis Control Unit, Temperature Too High

Group VTI: VTI Control Software

VTI 000158.03 - Control Software, Supply Voltage (ELX) Too High

VTI 000158.04 - Control Software, Supply Voltage (ELX) Too Low

VTI 000158.05 - Control Software, Supply Voltage (ELX) Too Low During Software Installation

VTI 000168.03 - Control Software, Supply Voltage (BAT) Too High

VTI 000441.00 - Control Software, Display Temperature Too High

VTI 000441.01 - Control Software, Display Temperature Too Low

VTI 000442.00 - Control Software, Display Temperature Too High

VTI 000442.01 - Control Software, Display Temperature Too Low

VTI 001563.11 - Task Controller, Software of Implement Not Compatible

VTI 001570.11 - Task Controller, Communication Interrupted

VTI 516776.31 - Control Software, Internal Fault

VTI 517232.02 - Vehicle CAN Bus (500 kBd), Fault

VTI 517233.12 - Control Software, Internal Fault

VTI 520211.05 - USB Memory Device Removed During Software Installation

VTI 522976.02 - Control Software, Internal Error

VTI 522976.11 - Control Software, Internal Error

VTI 522976.13 - Control Software, Internal Error

VTI 522976.14 - Control Software, Internal Error

VTI 522976.19 - Control Software, Internal Error

VTI 523436.00 - Control Software, Internal Error

VTI 523436.08 - Control Software, Internal Error

VTI 523436.09 - Control Software, Internal Error

VTI 523436.12 - Control Software, Internal Error

VTI 523436.14 - Control Software, Internal Error

VTI 523773.03 - Vehicle CAN BUS (500 kBd), Voltage Too High (CAN+)

VTI 523773.04 - Vehicle CAN BUS (500 kBd), Voltage Too Low (CAN+)

VTI 523774.03 - Vehicle CAN BUS (500 kBd), Voltage Too High (CAN-)

VTI 523774.04 - Vehicle CAN BUS (500 kBd), Voltage Too Low (CAN-)

VTI 524055.00 - Control Software, Internal Error

VTI 524055.15 - Control Software, Internal Error

VTI 524055.16 - Control Software, Internal Error

VTI 524215.03 - Implement CAN Bus, Voltage Too High (CAN+)

VTI 524215.04 - Implement CAN Bus, Voltage Too Low (CAN+)

VTI 524217.03 - Implement CAN Bus, Voltage Too High (CAN-)

VTI 524217.04 - Implement CAN Bus, Voltage Too Low (CAN-)

VTI 524259.00 - Control Software, Display Temperature Too High

VTI 524259.01 - Control Software, Display Temperature Too Low

Group VTV: VTV Control Software

VTV 000158.03 - Control Software, Supply Voltage (ELX) Too High

VTV 000158.04 - Control Software, Supply Voltage (ELX) Too Low

VTV 000158.05 - Control Software, Supply Voltage (ELX) Too Low During Software Installation

VTV 000168.03 - Control Software, Supply Voltage (BAT) Too High

VTV 000441.00 - Control Software, Display Temperature Too High

VTV 000441.01 - Control Software, Display Temperature Too Low

VTV 000442.00 - Control Software, Display Temperature Too High

VTV 001563.11 - Task Controller, Software of Implement Not Compatible

VTV 001570.11 - Task Controller, Communication Interrupted

VTV 516776.31 - Control Software, Internal Error

VTV 516843.09 - Connection to Processor, Fault

VTV 516849.09 - Connection to Processor, Fault

VTV 517232.02 - Vehicle CAN Bus (500 kBd), Fault

VTV 517233.12 - Control Software, Internal Error

VTV 520211.05 - USB Memory Device Removed During Software Installation

VTV 522976.02 - Control Software, Internal Error

VTV 522976.11 - Control Software, Internal Error

VTV 522976.13 - Control Software, Internal Error

VTV 522976.14 - Control Software, Internal Error

VTV 522976.19 - Control Software, Internal Error

VTV 523436.00 - Control Software, Internal Error

VTV 523436.08 - Control Software, Internal Error

VTV 523436.09 - Control Software, Internal Error

VTV 523436.12 - Control Software, Internal Error

VTV 523436.14 - Control Software, Internal Error

VTV 523773.03 - Vehicle CAN BUS (500 kBd), Voltage Too High (CAN+)

VTV 523773.04 - Vehicle CAN BUS (500 kBd), Voltage Too Low (CAN+)

VTV 523774.03 - Vehicle CAN BUS (500 kBd), Voltage Too High (CAN-)

VTV 523774.04 - Vehicle CAN BUS (500 kBd), Voltage Too Low (CAN-)

VTV 524055.00 - Control Software, Internal Error

VTV 524055.15 - Control Software, Internal Error

VTV 524055.16 - Control Software, Internal Error

VTV 524215.03 - Implement CAN Bus, Voltage Too High (CAN+)

VTV 524215.04 - Implement CAN Bus, Voltage Too Low (CAN+)

VTV 524217.03 - Implement CAN Bus, Voltage Too High (CAN-)

VTV 524217.04 - Implement CAN Bus, Voltage Too Low (CAN-)

VTV 524259.00 - Control Software, Display Temperature Too High

VTV 524259.01 - Control Software, Display Temperature Too Low

Group XMC: XMC Control Software

XMC 000168.01 - Steering Control Unit (AutoTrac™), Supply Voltage (BAT) Too Low

XMC 000609.12 - Control Software, Internal Fault

XMC 000628.12 - Control Software, Internal Fault

XMC 000629.02 - Control Software, Internal Fault

XMC 000629.12 - Control Software, Internal Fault

XMC 000639.08 - Vehicle CAN-BUS (500 kBd), Time-Out

XMC 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

XMC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

XMC 000701.02 - Incompatible Harness on Steering Control Unit (AutoTrac™)

XMC 000704.09 - Control Software, Internal Fault

XMC 000705.09 - Control Software, Internal Fault

XMC 000708.10 - Steering Wheel Position Sensor Channel 1, Fault

XMC 000708.16 - Steering Wheel Position Sensor, Frequency on Channel 1 Too High

XMC 000708.18 - Steering Wheel Position Sensor, Frequency on Channel 1 Too Low

XMC 000708.20 - Steering Wheel Position Sensor Channel 1, Fault

XMC 000708.21 - Steering Wheel Position Sensor Channel 1, Fault

XMC 000709.10 - Steering Wheel Position Sensor Channel 2, Fault

XMC 000709.16 - Steering Wheel Position Sensor, Frequency on Channel 2 Too High

XMC 000709.18 - Steering Wheel Position Sensor, Frequency on Channel 2 Too Low

XMC 000709.20 - Steering Wheel Position Sensor Channel 2, Fault

XMC 000709.21 - Steering Wheel Position Sensor Channel 2, Fault

XMC 001231.08 - Control Software, Internal Fault

XMC 001231.12 - Control Software, Internal Fault

XMC 001231.14 - Control Software, Internal Fault

XMC 002019.09 - Incorrect CAN BUS Message, Information from XSC Control Software

XMC 003032.02 - Position of Right Brake Pedal, Out of Valid Range

XMC 003032.03 - Sensor Unit for Right Brake Pedal, Voltage Too High

XMC 003032.04 - Sensor Unit for Right Brake Pedal, Voltage Too Low

XMC 003032.13 - Sensor of Right Brake Pedal, Not Calibrated

XMC 003033.02 - Position of Left Brake Pedal, Out of Valid Range

XMC 003033.03 - Sensor Unit for Left Brake Pedal, Voltage Too High

XMC 003033.04 - Sensor Unit for Left Brake Pedal, Voltage Too Low

XMC 003033.13 - Sensor of Left Brake Pedal, Not Calibrated

XMC 003841.00 - Wheel Angle Sensor Channel 1, Voltage Too High

XMC 003841.01 - Wheel Angle Sensor Channel 1, Voltage Too Low

XMC 003841.02 - Wheel Angle Sensor, Voltages in Channel 1 and Channel 2 Not in Correct Ratio

XMC 003842.00 - Wheel Angle Sensor Channel 2, Voltage Too High

XMC 003842.01 - Wheel Angle Sensor Channel 2, Voltage Too Low

XMC 003849.01 - Main and Electrical Hydraulic Pump PP2, Oil Pressure Too Low

XMC 003853.03 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Voltage Too High

XMC 003853.04 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Voltage Too Low

XMC 003854.03 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Voltage Too High

XMC 003854.04 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Voltage Too Low

XMC 003855.03 - Oil Pressure Sensor (Electric Hydraulic Pump BPP), Voltage Too High

XMC 003855.04 - Oil Pressure Sensor (Electric Hydraulic Pump BPP), Voltage Too Low

XMC 003856.01 - Main Hydraulic Pump PP1, Oil Pressure Too Low

XMC 003882.02 - Received Speed Signals, Fault

XMC 003882.11 - Received Speed Signals, Fault

XMC 003888.03 - Sensor Unit for Right Brake Pedal, Voltage Too High

XMC 003888.04 - Sensor Unit for Right Brake Pedal, Voltage Too Low

XMC 003888.08 - Sensor Unit for Right Brake Pedal, Fault

XMC 003888.13 - Sensor of Left Brake Pedal, Not Calibrated

XMC 003889.03 - Sensor Unit for Left Brake Pedal, Voltage Too High

XMC 003889.04 - Sensor Unit for Left Brake Pedal, Voltage Too Low

XMC 003889.08 - Sensor Unit for Left Brake Pedal, Fault

XMC 003889.13 - Sensor of Left Brake Pedal, Not Calibrated

XMC 522269.07 - Steering Control Valve, Malfunction

XMC 522270.07 - Steering Control Valve, Malfunction

XMC 522777.02 - Steering Wheel Position Sensor, Values in Channel 1 and Channel 2 Not in Correct Ratio

XMC 522845.16 - Steering Control Valve, Current Too High

XMC 522845.18 - Steering Control Valve, Current Too Low

XMC 522846.03 - Steering Control Valve, Voltage Too High

XMC 522846.05 - Steering Control Valve, Open Circuit

XMC 522846.06 - Steering Control Valve, Current Too High

XMC 522846.16 - Steering Control Valve, Current Too High

XMC 522846.18 - Steering Control Valve, Current Too Low

XMC 522847.16 - Steering Control Valve, Current Too High

XMC 522847.18 - Steering Control Valve, Current Too Low

XMC 522848.03 - Steering Control Valve, Voltage Too High

XMC 522848.05 - Steering Control Valve, Open Circuit

XMC 522848.06 - Steering Control Valve, Current Too High

XMC 522848.16 - Steering Control Valve, Current Too High

XMC 522848.18 - Steering Control Valve, Current Too Low

XMC 522920.09 - Incorrect CAN BUS Message, Information from XSC Control Software

XMC 522976.12 - Control Software, Internal Fault

XMC 523137.14 - Control Software, Internal Fault

XMC 523789.13 - Wheel Angle Sensor Not Calibrated

XMC 523795.13 - Steering Control Valve Not Calibrated

XMC 524055.02 - Control Software, Internal Fault

XMC 524055.12 - Control Software, Internal Fault

Group XSC: XSC Control Software

XSC 000084.02 - Wheel Speed Sensor, Fault

XSC 000609.12 - Control Software, Internal Fault

XSC 000611.09 - Control Software, Internal Fault

XSC 000628.12 - Control Software, Internal Fault

XSC 000629.02 - Control Software, Internal Fault

XSC 000629.12 - Control Software, Internal Fault

XSC 000629.31 - Control Software, Internal Fault

XSC 000639.08 - Vehicle CAN-BUS (500 kBd), Time-Out

XSC 000639.12 - Vehicle CAN Bus (500 kBd), High Error Rate

XSC 000639.14 - Vehicle CAN Bus (500 kBd), Very High Error Rate

XSC 000701.02 - Incompatible Harness on Steering Control Unit (AutoTrac™)

XSC 000704.09 - Control Software, Internal Fault

XSC 000705.09 - Control Software, Internal Error

XSC 000708.10 - Steering Wheel Position Sensor Channel 1, Fault

XSC 000708.16 - Steering Wheel Position Sensor, Frequency on Channel 1 Too High

XSC 000708.18 - Steering Wheel Position Sensor, Frequency on Channel 1 Too Low

XSC 000708.20 - Steering Wheel Position Sensor Channel 1, Fault

XSC 000708.21 - Steering Wheel Position Sensor Channel 1, Fault

XSC 000709.10 - Steering Wheel Position Sensor Channel 2, Fault

XSC 000709.16 - Steering Wheel Position Sensor, Frequency on Channel 2 Too High

XSC 000709.18 - Steering Wheel Position Sensor, Frequency on Channel 2 Too Low

XSC 000709.20 - Steering Wheel Position Sensor Channel 2, Fault

XSC 000709.21 - Steering Wheel Position Sensor Channel 2, Fault

XSC 000818.05 - AB-COM Relay, Current Too Low

XSC 000818.06 - AB-COM Relay, Voltage Too Low

XSC 001044.07 - Electric Hydraulic Pump, Pressure Too Low

XSC 001044.09 - Electrical Hydraulic Pump, Fault

XSC 001044.14 - Electrical Hydraulic Pump, Fault

XSC 001231.08 - Control Software, Internal Fault

XSC 001231.12 - Control Software, Internal Fault

XSC 001231.14 - Control Software, Internal Fault

XSC 001504.14 - Operator Presence Switch, No-one on Operator's Seat While AutoTrac is Running

XSC 001504.31 - Operator Presence Switch, No-one on Operator's Seat While AutoTrac is Running

XSC 001807.02 - Steering Wheel Position Sensor, Incorrect Signal

XSC 001807.10 - Steering Wheel Position Sensor, Incorrect Signal

XSC 001807.16 - Steering Wheel Position Sensor, Frequency at Channel 1 Too High

XSC 001807.18 - Steering Wheel Position Sensor, Frequency at Channel 1 Too Low

XSC 001807.20 - Steering Wheel Position Sensor Channel 1, Malfunction

XSC 001807.21 - Steering Wheel Position Sensor Channel 1, Malfunction

XSC 001807.31 - Steering Wheel Position Sensor, Malfunction

XSC 002000.09 - CAN Bus Message Cannot Be Received, Information from ECU Control Software

XSC 002003.09 - CAN Bus Message Cannot Be Received, Information from PTA/PTQ or PTD Control Software

XSC 002005.09 - CAN Bus Message Cannot Be Received, Information from TIA/TIQ or TID Control Software

XSC 002028.09 - CAN Bus Message Cannot Be Received, Information from ITC Control Software

XSC 002042.09 - CAN Bus Message Cannot Be Received, Information from VTI Control Software

XSC 002049.09 - CAN Bus Message Cannot Be Received, Information from OIC Control Software

XSC 002071.09 - CAN Bus Message Cannot Be Received, Information from CCU Control Software

XSC 002198.09 - CAN Bus Message Cannot Be Received, Information from XMC Control Software

XSC 002240.09 - CAN Bus Message Cannot be Received, Information from TEC Control Software

XSC 003509.03 - 5 V Supply Voltage 1 Too High

XSC 003509.04 - 5 V Supply Voltage 1 Too Low

XSC 003511.03 - 5 V Supply Voltage 3 Too High

XSC 003511.04 - 5 V Supply Voltage 3 Too Low

XSC 003512.03 - 5 V Supply Voltage 4 Too High

XSC 003512.04 - 5 V Supply Voltage 4 Too Low

XSC 003841.00 - Wheel Angle Sensor Channel 1, Voltage Too High

XSC 003841.01 - Wheel Angle Sensor Channel 1, Voltage Too Low

XSC 003841.02 - Wheel Angle Sensor, Voltages in Channel 1 and Channel 2 Not in Correct Ratio

XSC 003842.00 - Wheel Angle Sensor Channel 2, Voltage Too High

XSC 003842.01 - Steering Angle Sensor Channel 2, Voltage Too Low

XSC 003849.01 - Main and Electrical Hydraulic Pump PP2, Oil Pressure Too Low

XSC 003853.03 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Voltage Too High

XSC 003853.04 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Voltage Too Low

XSC 003854.03 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Voltage Too High

XSC 003854.04 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Voltage Too Low

XSC 003855.03 - Oil Pressure Sensor (Electric Hydraulic Pump BPP), Voltage Too High

XSC 003855.04 - Oil Pressure Sensor (Electric Hydraulic Pump BPP), Voltage Too Low

XSC 003856.01 - Main Hydraulic Pump PP1, Oil Pressure Too Low

XSC 003882.02 - Received Speed Signals, Fault

XSC 003882.11 - Received Speed Signals, Fault

XSC 003888.03 - Sensor Unit for Right Brake Pedal, Voltage Too High

XSC 003888.04 - Sensor Unit for Right Brake Pedal, Voltage Too Low

XSC 003888.08 - Sensor Unit for Right Brake Pedal, Fault

XSC 003888.13 - Sensor of Left Brake Pedal, Not Calibrated

XSC 003889.03 - Sensor Unit for Left Brake Pedal, Voltage Too High

XSC 003889.04 - Sensor Unit for Left Brake Pedal, Voltage Too Low

XSC 003889.08 - Sensor Unit for Left Brake Pedal, Fault

XSC 003889.13 - Sensor of Left Brake Pedal, Not Calibrated

XSC 522387.07 - Expected Steering Movement of Front Wheels is Not Detected

XSC 522390.09 - Incorrect CAN BUS Message, Information from Implement

XSC 522390.11 - Tractor-Implement Automation™, Fault

XSC 522390.12 - Tractor-Implement Automation™, Fault

XSC 522390.19 - Tractor-Implement Automation™, Fault

XSC 522451.00 - Wheel Angle Sensor Channel 2, Voltage Too High

XSC 522451.01 - Wheel Angle Sensor Channel 2, Voltage Too Low

XSC 522451.02 - Wheel Angle Sensor, Voltages in Channel 1 and Channel 2 Not in Correct Ratio

XSC 522765.05 - Ground Connection 4, Current Too Low

XSC 522766.05 - Ground Connection 3, Current Too Low

XSC 522767.05 - Ground Connection 2, Current Too Low

XSC 522768.05 - Ground Connection 1, Current Too Low

XSC 522767.05 - Control Software XSC, Ground Contact Fault

XSC 522768.05 - Control Software XSC, Ground Contact Fault

XSC 522777.02 - Steering Wheel Position Sensor, Values in Channel 1 and Channel 2 Not in Correct Ratio

XSC 522777.05 - Steering Wheel Position Sensor, Open Circuit

XSC 522786.01 - Oil Pressure Sensor, Pressure Too Low

XSC 522787.01 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Pressure Too Low

XSC 522787.03 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Voltage Too High

XSC 522787.04 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Voltage Too Low

XSC 522787.15 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Fault

XSC 522787.17 - Oil Pressure Sensor (Main and Electric Hydraulic Pump PP2), Fault

XSC 522789.03 - Oil Pressure Sensor (Electric Hydraulic Pump BPP), Voltage Too High

XSC 522789.04 - Oil Pressure Sensor (Electric Hydraulic Pump BPP), Voltage Too Low

XSC 522789.14 - Hydraulic Oil Temperature Too Low

XSC 522789.15 - Oil Pressure Sensor (Electric Hydraulic Pump BPP), Fault

XSC 522790.01 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Pressure Too Low

XSC 522790.03 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Voltage Too High

XSC 522790.04 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Voltage Too Low

XSC 522790.15 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Fault

XSC 522790.17 - Oil Pressure Sensor (Main Hydraulic Pump PP1), Fault

XSC 522852.03 - Electric Hydraulic Pump, Voltage Too High

XSC 522852.04 - Electric Hydraulic Pump, Voltage Too Low

XSC 522852.05 - Electric Hydraulic Pump, Current Too Low

XSC 522852.06 - Electric Hydraulic Pump, Current Too High

XSC 522853.03 - AB-COM Relay, Voltage Too High

XSC 522853.04 - AB-COM Relay, Voltage Too Low

XSC 522853.05 - AB-COM Relay, Current Too Low

XSC 522853.06 - AB-COM Relay, Current Too High

XSC 522920.09 - Incorrect CAN Bus Message, Information from XMC Control Software

XSC 522976.12 - Control Software, Internal Fault

XSC 523137.14 - Control Software, Internal Fault

XSC 523216.04 - Supply Voltage 4 of the Control Software Too Low

XSC 523217.04 - Supply Voltage 3 of the Control Software Too Low

XSC 523218.04 - Supply Voltage 2 of the Control Software Too Low

XSC 523219.04 - Supply Voltage 1 of the Control Software Too Low

XSC 523218.04 - Control Software, Supply Voltage (BAT) Too Low

XSC 523219.04 - Control Software, Supply Voltage (BAT) Too Low

XSC 523789.05 - Wheel Angle Sensor, Open Circuit

XSC 523789.13 - Wheel Angle Sensor Not Calibrated

XSC 523795.07 - Steering Control Valve, Malfunction

XSC 523795.13 - Steering Control Valve Not Calibrated

XSC 523795.16 - Steering Control Valve, Too High Steering Angle

XSC 523795.18 - Steering Control Valve, Too Low Steering Angle

XSC 523815.03 - Steering Control Valve, Voltage Too High

XSC 523815.04 - Steering Control Valve, Voltage Too Low

XSC 523815.05 - Steering Control Valve, Current Too Low

XSC 523815.06 - Steering Control Valve, Current Too High

XSC 523821.02 - Incompatible Harness on Steering Control Unit (AutoTrac™)

XSC 523824.10 - Steering Wheel Position Sensor Channel 2, Malfunction

XSC 523824.16 - Steering Wheel Position Sensor, Frequency at Channel 2 Too High

XSC 523824.18 - Steering Wheel Position Sensor, Frequency at Channel 2 Too Low

XSC 523824.20 - Steering Wheel Position Sensor Channel 2, Malfunction

XSC 523824.21 - Steering Wheel Position Sensor Channel 2, Malfunction

XSC 523826.00 - Wheel Angle Sensor Channel 1, Voltage Too High

XSC 523826.01 - Wheel Angle Sensor Channel 1, Voltage Too Low

XSC 523826.14 - Steering Wheel Position Sensor, Malfunction

XSC 523925.09 - Incorrect CAN BUS Message, Information from XMC Control Software

XSC 524055.02 - Control Software, Internal Fault

XSC 524055.12 - Control Software, Internal Fault

Section 212: Observable Symptoms and System Diagnostics

Group 20: Engine

Engine Does not Crank

Engine Cranks but will not Start

Problem with DEF Fill Level Indicator

Group 30: Fuel, Air Intake, and Cooling Systems

Problems with the Fuel System

Problems with the Air Intake System

Problems with the Cooling System

Group 40: Electrical System

Check System Voltage

Problems with the System Voltage

Problems with the Starting Circuit

Problems with the Charging Circuit

Problems with the Battery Cut-Off Relay

Problems with the Hazard Flashers

Problems with the Dome Light

Problems with the Lighting System - Egress Light

Problems with the Cigarette Lighter

Problems with the Electrical Cooling Compartment

Problems with the Operator's Seat

Problems with the Electrical Outside Mirrors

Problems with Accessories / Front Loader (X037)

Problems with the Electrohydraulic Pick-Up Hitch

Problems with the Radio (Blocked)

Problems with the Radio (DIM Function)

Problems with Front-Wheel Drive Switching On and Off Automatically

Problems with the Front Hitch

Problems with Rear PTO

Problems When Installing the Front Loader

Problems with the Implement Switch

Problems with the Socket for the Anti-Blocking System (ABS) of Trailer

Group 45: Electronic Control Units

Problems with the Voltage Supply of the Control Units

Problems When Programming Control Units

VIN Security Fault Diagnosis

Problems with Implement CAN Bus

Problems with the CAN Bus - E-SCV and Front Hitch

Problems with the E-SCV and Rear Hitch CAN Bus

Problems with Vehicle CAN Bus (500 kBd)

Problems with Drivetrain CAN Bus

Problems with Engine CAN Bus

Problems with Aftertreatment CAN Bus

Problems with the CommandCenter™

Group 50A: Drivetrain (without Transmission)

Problem with Rear PTO

Problem with Front PTO

Group 50B: AutoPowr™/IVT™ Transmission

AutoPowr™/IVT™ Transmission - Problem with Noise/Vibration

AutoPowr™/IVT™ Transmission Problem

AutoPowr™/IVT™ Transmission - Problem with Transmission Calibration

AutoPowr™/IVT™ Transmission - Vehicle Does Not Reach the Max. Speed

AutoPowr™/IVT™ Transmission - Problem with Reverse Drive Lever

AutoPowr™/IVT™ Transmission - Problem with the Speed Control Lever

Group 50D: DirectDrive Transmission

DirectDrive Transmission, Customizing Vehicle Behavior

DirectDrive Transmission - Shift Unit Problem

DirectDrive Transmission - System Test

DirectDrive Transmission - Hydraulic System Test

DirectDrive Transmission - Vehicle Does Not Reach the Max. Speed

DirectDrive Transmission - Problem with Reverse Drive Lever

DirectDrive Transmission - Shift Unit Problem

PTD Control Software - Fine-Tuning

Group 50C: PowrQuad™ Transmission

Problems with the PowrQuad Plus Transmission

PowrQuad™ Transmission - Vehicle Does Not Reach the Max. Speed

PowrQuad™ Transmission - Problem with Reverse Drive Lever

PowrQuad™ Transmission - Problem with the Gears and Their Modulation

Group 60A: Steering

Problems with Front-Wheel Drive Switching On and Off Automatically

Problems with Differential Lock Switching On and Off Automatically

Problems with Steering

Problems with AutoTrac™

Group 60B: Brakes

Problems with Brakes

Problems with Emergency Brake

Problems with Hydraulic Trailer Brake

Problems with Air Brake System

Pressure Problems with Air Brake System

Group 70: Hydraulic System

Problem with Front Loader

Problem with Front Hitch

Problem with Rear Hitch

Problem with the PFC hydraulic system (E-SCV)

Problem with PFC Hydraulic System (M-SCV)

Problem with the control lever for E-SCV I

Problem with the control lever for E-SCV II

Problem with the control lever for E-SCV III

Problem with the control lever for E-SCV IV

Problem with the multi-function lever function 1

Problem with the multi-function lever function 2

Problem with the multi-function lever function 3

Group 80A: Machine-Specific Systems

Problems with Electro-Hydraulic Pick-Up Hitch (E-PUH)

Group 80B: Suspension Systems

Problems with Suspended Front-Wheel Drive Axle

Problems with Cab Suspension

Group 90: Operator's Cab

Problems with the Automatic Air Conditioning Control

Problems with Air-Conditioning System and/or Heater

Section 220: Engine

Group 20: Aftertreatment, Theory of Operation

Exhaust Aftertreatment System, Theory of Operation - Summary of References

Exhaust Aftertreatment System, Theory of Operation (Final Tier 4/Stage IV)

Group 50: Tests and Adjustments

Engine - Tests and Adjustments, Summary of References

Engine - Special Tools, Summary of References

Engine - Measure PTO Power Output

Section 230: Fuel, Air Intake, and Cooling Systems

Group 05: General Information

Fuel, Air Intake and Cooling Systems - General Information, Summary of References

Fuel, Air Intake and Cooling Systems - General Information

Fuel, Air Intake and Cooling Systems - Explanation of Checks

Fuel, Air Intake and Cooling Systems - Safety Measures

Group 20A: Fuel System, Theory of Operation

Fuel System - Summary of References

Fuel System, Theory of Operation

Group 20B: Air Intake System, Theory of Operation

Air Intake System - Theory of Operation, Summary of References

Air Intake System - Theory of Operation (6110R, 6120R, 6130R and 6135R Tractor Models)

Air Intake System, Theory of Operation

Group 20C: Cooling System, Theory of Operation

Cooling System - Summary of References

Cooling System - Coolant Circuit, Theory of Operation

Group 20D: Charge Air Circuit, Theory of Operation

Charge Air Circuit - Summary of References

Charge Air Circuit, Theory of Operation

Group 20E: Cold-Weather Starting System, Theory of Operation

Cold-Weather Starting System - Theory of Operation, Summary of References

Cold-Weather Starting System - Coolant Preheater, Theory of Operation

Cold-Weather Starting System - Charge Pump Preheater, Theory of Operation

Cold-Weather Starting System - Transmission Oil Preheater, Theory of Operation

Group 20F: DEF Cooling Circuit, Theory of Operation

DEF Cooling Circuit - Theory of Operation, Summary of References

DEF Cooling Circuit, Theory of Operation

DEF Tank Header Assembly, Theory of Operation

Group 20G: Viscous Fan Drive (Electric), Theory of Operation

Viscous Fan Drive (Electric), Electrical, Summary of References

Viscous Fan Drive (Electric), Theory of Operation

Group 30: Fuel, Air Intake, and Cooling Systems - Schematics

Fuel, Air Intake and Cooling Systems - Schematics - Summary of References

General Information, Description of Operation

Transmission Oil Circuit, Schematic

Charge Air Circuit, Schematic of Drive for Hydraulic Motor/Charge Air Cooler

Group 50: Fuel, Air Intake, and Cooling Systems - Tests and Adjustments

Fuel, Air Intake and Cooling Systems - Tests and Adjustments, Summary of References

Specifications

Fuel, Air Intake and Cooling Systems - Special Tools, Summary of References

Fuel System - Check Fuel Transfer Pump

Cooling System - Fill/Bleed the System

Cooling System - Leak Test

Cooling System - Check Viscous Fan Drive

Charge Air Circuit - Check the Fan

Section 239: Fuel, Air Intake, and Cooling Systems - Component Information

Group 40A: Fuel System, Component Information

Fuel System - Component Information, Summary of References

Fuel System - Fuel Cooler, Component Information

Fuel System - Primary Fuel Filter, Component Information

Fuel System - Fuel Filter, Component Information

Fuel System - Fuel Transfer Pump, Component Information

Group 40C: Cooling System, Component Information

Cooling System - Component Information, Summary of References

Cooling System - Radiator, Component Information

Cooling System - Viscous Fan Drive, Component Information

Group 40D: Charge Air Circuit, Component Information

Charge Air Circuit - Component Information, Summary of References

Charge Air Circuit - Charge Air Cooler, Component Information

Charge Air Circuit - Oil Cooler, Component Information

Charge Air Circuit - Thermovalve, Component Information

Charge Air Circuit - Transmission Oil Pump, Component Information

Charge Air Circuit - Hydraulic Motor, Component Information

Group 40E: Cold Start System, Component Information

Cold-Weather Starting System - Component Information, Summary of References

Cold-Weather Starting System - Coolant Preheater, Component Information

Cold-Weather Starting System - Charge Pump Preheater, Component Information

Cold-Weather Starting System - Transmission Oil Preheater, Component Information

Section 240: Electrical System

Group 05: Electrical System - General Information

Electrical System - Special Tools, Summary of References

General - Electrical System, Faults and Circuit Tests

General - Electrical System, Test for Open Circuit under Load

General - Electrical System, Disconnect the Battery on Engines with DEF

Group 20: Electrical System - Theory of Operation

Electrical System - Theory of Operation, Summary of References

CommandARM™ Controls, Theory of Operation and Diagnostics

Front-Wheel Drive with Auto Function, Theory of Operation

Differential Lock with Auto Function, Theory of Operation

Wake-Up Voltage and Keep-Alive Voltage, Theory of Operation

Intelligent Power Management, Theory of Operation

Group 30A: Electrical System - Diagnostic Schematics

30A - Electrical System - Summary of Diagnostic Schematics

Group 50AA: Starter Motor and Charging Circuit

50AA - Electrical System - Starter Motor and Charging Circuit, Summary of References

50AA - Battery Cut-off Switch, Diagnostic Schematic

50AA - Central Voltage Supply, Diagnostic Schematic

50AA - Voltage Supply (Lead 0012), Diagnostic Schematic

50AA - Power Supply to Electronics (ELX), Diagnostic Schematic

50AA - Power Supply of the Accessories (ACC1), Diagnostic Schematic

50AA - Power Supply of the Accessories (ACC2), Diagnostic Schematic

50AA - Power Supply to Electronics (IGN), Diagnostic Schematic

50AA - Voltage Supply (Shunt), Diagnostic Schematic

50AA - Starter Motor, Diagnostic Schematic

50AA - Alternator, Diagnostic Schematic

A136_K05/01_PLB - Battery Cut-Off Relay, Circuit Test

G001 - Battery, Circuit Test

G004 - Alternator, Circuit Test

K02/04_PLB - Starter Relay 1, Circuit Test

K02/05_PLB - Starter Relay 2, Circuit Test

K02/19_LCS - Relay for Ignition, Circuit Test

K03/20_LCS - Diode for Power Supply to Electronics, Circuit Test

K04/04_LCS - Relay for Power Supply to Accessories (ACC1), Circuit Test

K05/01_LCS - Relay for Power Supply to Electronics (ELX), Circuit Test

K05/02_LCS - Relay for Power Supply to Electronics (IGN), Circuit Test

K05/04_LCS - Relay for Power Supply to Accessories (ACC2), Circuit Test

M001 - Starter Motor, Circuit Test

S012 - Key Switch, Circuit Test

Group 50AB: Voltage Converter

Electrical System - Voltage Converter - Tests and Adjustments, Summary of References

50AB - Voltage Converter, Diagnostic Schematic

A146 - Voltage Converter, Circuit Test

Group 50BA: Lights

50BA - Lights, Summary of References

50BA - Park Light, Cab (ECE), Diagnostic Schematic

50BA - Park Light, Cab (SAE), Diagnostic Schematic

50BA - Headlights, Diagnostic Schematic

50BA - Headlights on Cab Frame, Diagnostic Schematic

50BA - Light Switch, Diagnostic Schematic

E003 - Left Clearance Light (ECE), Circuit Test

E004 - Right Clearance Light (ECE), Circuit Test

E007 - Left Headlight on Cab Frame, Circuit Test

E008 - Right Headlight on Cab Frame, Circuit Test

E021-L - Left License Plate Light, Circuit Test

E021-R - Right License Plate Light, Circuit Test

E068 - Left Tail Light, Circuit Test

E069 - Right Tail Light, Circuit Test

E074-L - Left Low-Beam Headlight, Circuit Test

E074-R - Right Low-Beam Headlight, Circuit Test

E075-L - Left High-Beam Headlight, Circuit Test

E075-R - Right High-Beam Headlight, Circuit Test

H092 - Right Extra-Wide Vehicle Warning Light (ECE), Circuit Test

H093 - Left Extra-Wide Vehicle Warning Light (ECE), Circuit Test

S127 - Turn-Signal Lever (High-Beam/Low-Beam Function), Circuit Test

S137 - Light Switch, Circuit Test

Group 50BB: Flood Lights

50BB - Worklights, Summary of References

50BB - Front Corner Flood Lights, Diagnostic Schematic

50BB - Worklights on Rear of Roof, Diagnostic Schematic

50BB - Worklights on Front of Roof, Diagnostic Schematic

50BB - Worklights on Cab Frame, Diagnostic Schematic

50BB - Rear Fender Worklight, Diagnostic Schematic

E009-L - Left Front Corner Worklight, Circuit Test

E009-R - Right Front Corner Flood Light, Circuit Test

E015-L - Left Worklight on Rear Fender, Circuit Test

E015-R - Right Worklight on Rear Fender, Circuit Test

E035-L - Worklight on Left Cab Frame, Circuit Test

E35-R - Right Worklight on Cab Frame, Circuit Test

E078-1L - Left Inner Worklight on Rear of Roof, Circuit Test

E078-1R - Right Inner Worklight on Rear of Roof, Circuit Test

E078-2L - Left Outer Worklight on Rear of Roof, Circuit Test

E078-2R - Right Outer Worklight on Rear of Roof, Circuit Test

E078-3L - Left Side-Facing Worklight on Rear of Roof, Circuit Test

E078-3R - Right Side-Facing Worklight on Rear of Roof, Circuit Test

E079-1L - Left Inner Worklight on Front of Roof, Circuit Test

E079-1R - Right Inner Worklight on Front of Roof, Circuit Test

E079-2L - Left Outer Worklight on Front of Roof, Circuit Test

E079-2R - Right Outer Worklight on Front of Roof, Circuit Test

E079-3L - Left Middle Worklight on Front of Roof, Circuit Test

E079-3R - Right Middle Worklight on Front of Roof, Circuit Test

Group 50BC: Dome Light

50BC - Dome Light, Summary of References

50BC - Access Step Light, Diagnostic Schematic

50BC - Dome Light, Diagnostic Schematic

50BC - Backlighting, Diagnostic Schematics

E076 - Left Dome Light, Circuit Test

E077 - Right Dome Light, Circuit Test

H087/1 - Right Access Step Light, Circuit Test

H087/2 - Left Access Step Light, Circuit Test

H088 - Console Light, Circuit Test

S082 - Switch for Dome Light, Circuit Test

S186-LH - Left Switch for Dome Lights, Circuit Test

S186-RH - Right Switch for Dome Lights, Circuit Test

Group 50BD: Turn-Signal Lights

50BD - Turn-Signal Lights, Summary of References

50BD - Turn-Signal Light Switch on Tractors with PowrQuad™ Transmission, Diagnostic Schematic

50BD - Turn-Signal Light Switch on Tractors with DirectDrive or AutoPowr™/ IVT™ Transmission, Diagnostic Schematic

50BD - Turn-Signal Lights (ECE) Output, Diagnostic Schematic

50BD - Turn-Signal Lights (SAE) Output, Diagnostic Schematic

E070 - Rear Left Turn-Signal Light, Circuit Test

E071 - Rear Right Turn-Signal Light, Circuit Test

H034 - Front Left Turn-Signal Light (ECE), Circuit Test

H042 - Front Right Turn-Signal Light (ECE), Circuit Test

H044 - Front Left Turn-Signal Light in Roof (SAE), Circuit Test

H045 - Front Right Turn-Signal Light in Roof (SAE), Circuit Test

H046 - Rear Left Turn-Signal Light in Roof (SAE), Circuit Test

H047 - Rear Right Turn-Signal Light in Roof (SAE), Circuit Test

H090 - Right Extra-Wide Vehicle Turn-Signal Light (SAE), Circuit Test

H091 - Left Extra-Wide Vehicle Turn-Signal Light (SAE), Circuit Test

S127 - Turn-Signal Lever (Turn-Signal Function), Circuit Test

Group 50CA: Operator's Seat

50CA - Operator's Seat, Summary of References

50CA - Operator's Seat, Diagnostic Schematic

50CA - Operator Presence Switch, Diagnostic Schematic

A029 - Seat with Compressor and Heater, Circuit Test

S040 - Operator Presence Switch, Circuit Test

Group 50CB: Acoustic Alarm

50CB - Acoustic Alarms, Summary of References

50CB - Backup Alarm, Diagnostic Schematic

50CB - Horn, Diagnostic Schematic

50CB - Acoustic Alarm, Diagnostic Schematic

Acoustic Alarm, Circuit Test

H001 - Horn, Circuit Test

H067 - Backup Alarm, Circuit Test

S127 - Turn-Signal Lever (Horn Function), Circuit Test

Group 50CC: Windshield and Rear Window Wipers

50CC - Windshield and Rear Window Wipers, Summary of References

50CC - Rear Window Wiper, Diagnostic Schematic

50CC - Windshield Wiper, Diagnostic Schematic

M005 - Windshield Washer Pump, Circuit Test

M006 - Rear Window Washer Pump, Circuit Test

M039 - Windshield Wiper Motor (in Cab Roof), Circuit Test

M040 - Rear Wiper Motor, Circuit Test

M041 - Windshield Wiper Motor (with Panorama Cab), Circuit Test

S128 - Switch for Windshield and Rear Window Wipers, Circuit Test

S188 - Rear Wiper Shut-Off Switch, Circuit Test

Group 50CD: Heater / Ventilation / Air Conditioning (HVAC)

50CD - Heater/Ventilation/Air-Conditioning System, Summary of References

50CD - Sensors, Diagnostic Schematic

50CD - Valves, Actuators, Diagnostic Schematic

50CD - Air Conditioner Compressor, Diagnostic Schematic

50CD - Heated Rear Window, Diagnostic Schematic

B125 - Sensor for Ambient Air Temperature (at Front), Circuit Test

B126 - Sensor for Ambient Air Temperature (at Rear), Circuit Test

B127 - Sensor for Inside Air Temperature, Circuit Test

B128 - Outlet Temperature Sensor, Circuit Test

B129 - Sensor for Evaporator Core Temperature, Circuit Test

B130 - Refrigerant Pressure Sensor, Circuit Test

B131 - Heater Valve, Circuit Test

B132 - Actuator for Air Distribution, Circuit Test

B143 - Defog Sensor, Circuit Test

M002 - A/C Compressor Clutch, Circuit Test

M009 - Pressurizer Blower Motor for Pressure Inside Cab, Circuit Test

M042 - Circulation Blower Motor, Circuit Test

R017 - Heated Rear Window, Circuit Test

Group 50CE: Power Outlet Sockets

50CE - Electrical System - Sockets, Summary of References

50CE - 3-Terminal Power Outlet Socket (Front Hitch), Diagnostic Schematic

50CE - Connector for Accessories, Diagnostic Schematic

50CE - 2-Terminal Power Outlet Socket, Diagnostic Schematic

50CE - 3-Terminal Power Outlet Socket, Diagnostic Schematic

50CE - Service Socket, Diagnostic Schematic

50CE - Socket for the Anti-Blocking System (ABS), Diagnostic Schematic

50CE - Signal Socket, Diagnostic Schematic

50CE - 7-Terminal Power Outlet Socket, Diagnostic Schematic

E006 - 2-Terminal Power Outlet Socket, Circuit Test

X005 - 7-Terminal Power Outlet Socket (ECE) at Rear, Circuit Test

X006-ECE - 3-Terminal Power Outlet Socket (ECE), Circuit Test

X006-SAE - 3-Terminal Power Outlet Socket (SAE), Circuit Test

X023 - 7-Terminal Power Outlet Socket (SAE), Circuit Test

X037F-3 - Connector for Accessories, Circuit Test

X037F-1 - Connector of Front Loader, Circuit Test

X132 - Signal Socket, Circuit Test

X197 - Socket for the Anti-Blocking System (ABS) of Trailer, Circuit Test

X257 - 3-Terminal Power Outlet Socket (Front Hitch), Circuit Test

X304 - 3-Terminal Multiple Power Outlet Socket Strip, Circuit Test

X571 - Service Socket (CAN Bus), Circuit Test

X883 - 7-Terminal Power Outlet Socket (ECE) at Front, Circuit Test

X884 - 3-Terminal Power Outlet Socket (Field Office™), Circuit Test

X886 - 3-Terminal Power Outlet Socket (Shift Console), Circuit Test

Group 50CF: Radio

50CF - Electrical System - Radio, Summary of References

50CF - Radio, Diagnostic Schematic

50CF - Radio (Retrofit ECE), Diagnostic Schematic

A117 - Left Rear Speaker, Circuit Test

A118 - Right Rear Speaker, Circuit Test

A141 - Audio Interface (USB / 3,5 mm Stereo Jack), Circuit Test

A142 - XM Satellite Radio, Circuit Test

A151 - Left Front Speaker, Circuit Test

A152 - Right Front Speaker, Circuit Test

B145 - Microphone, Circuit Test

W027 - Radio Antenna, Circuit Test

W029 - Antenna for XM Satellite Radio, Circuit Test

Group 50CG: Electrical Outside Mirrors

50CG - Electrical System - Electrical Outside Mirrors - Summary of References

50CG - Electrical Outside Mirrors (Mirror Arm Adjustment), Diagnostic Schematic

50CG - Electrical Outside Mirrors (Mirror Adjustment), Diagnostic Schematic

50CG - Electrical Outside Mirrors (Heater), Diagnostic Schematic

M019 - Left Outside Mirror, Adjusted and Heated Electrically, Circuit Test

M020 - Right Outside Mirror, Adjusted and Heated Electrically, Circuit Test

S103 - Mirror Heater Switch, Circuit Test

S181 - Mirror Adjuster Switch, Circuit Test

S185 - Mirror-Arm Adjuster Switch, Circuit Test

Group 50CH: Accessories

50CH - Accessories, Summary of References

50CH - Beacon Light, Diagnostic Schematic

50CH - Cigarette Lighter, Diagnostic Schematic

50CH - Cooling Compartment, Diagnostic Schematic

50CH - Checking Fuse, Diagnostic Schematic

A077 - Electrical Cooling Compartment, Circuit Test

E005 - Cigarette Lighter, Circuit Test

E027-L - Left Beacon Light, Circuit Test

E027-R - Right Beacon Light, Circuit Test

Group 50EA: TEC Control Software and ISOBUS

50EA - Electrical System - TEC Control Software and ISOBUS, Summary of References

50EA - Rear Implement Sockets, Diagnostic Schematic

50EA - Front Implement Sockets, Diagnostic Schematic

50EA - GreenStar™ Display (GSD4), Diagnostic Schematic

50EA - GreenStar™ Display (GSD2/3), Diagnostic Schematic

50EA - Implement Switch, Diagnostic Schematic

50EA - Socket for GreenStar™ Display, Diagnostic Schematic

50EA - Implement CAN Bus Socket in Cab, Diagnostic Schematic

50EA - StarFire™ ITC Receiver, Diagnostic Schematic

50EA - GreenStar™ Display (General), Diagnostic Schematic

A051 - GreenStar™ Mobile Processor, Circuit Test

A052 - StarFire™ ITC Receiver, Circuit Test

A090 - Rear Implement Socket, Circuit Test

A091 - Front Implement Socket, Circuit Test

K01/20_LCS - Relay for GreenStar™, Circuit Test

K060 - Relays for Implement CAN Bus Socket in Cab, Circuit Test

P019 - GreenStar™ Display (GSD4), Circuit Test

P030 - GreenStar™ Display (GSD2/3), Circuit Test

P033 - Monitor (A-Post), Circuit Test

P034 - Monitor (C-Post), Circuit Test

X574F - Connector of Implement Switch, Circuit Test

X689F - Connector for Power Supply to External Display, Circuit Test

X888M - CAN Bus Implement Socket in Operator's Cab, Circuit Test

Group 50EB: AutoTrac™

50EB - Electrical System - AutoTrac™, Summary of References

50EB - AutoTrac™, Diagnostic Schematic

B138 - Sensor for Steering Wheel Position, Circuit Test

B139 - Steering Angle Sensor, Circuit Test

Y114-1 - Solenoid Valve for Steering Control Valve (Enable Valve) (AutoTrac™), Circuit Test

Y114-2 - Solenoid Valve for Steering Control Valve (Left Turn) (AutoTrac™), Circuit Test

Y114-3 - Solenoid Valve for Steering Control Valve (Right Turn) (AutoTrac™), Circuit Test

Group 50EC: Radar

50EC - Radar, Summary of References

50EC - Ground Speed Sensor (Radar), Diagnostic Schematic

B039 - Ground Speed Sensor (Radar), Circuit Test

Group 50ED: JDLink™/Service ADVISOR™ Remote

50ED - Electrical System - JDLink™/Service ADVISOR™ Remote, Summary of References

50ED - JDLink™/Service ADVISOR™ Remote, Diagnostic Schematic

A155 - Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote), Circuit Test

A159 - Ethernet Network Splitter, Circuit Test

A160 - Control Unit for John Deere Machine Sync, Circuit Test

W024 - Antenna for Telematics (JDLink™ / Service ADVISOR™ Remote), Circuit Test

W030 - Antenna for Machine Sync, Circuit Test

Group 50FA: Electronic Engine Control

50FA - Electronic Engine Control, Summary of References

50FA - Hand Throttle and Accelerator Pedal, Diagnostic Schematic

50FA - Electrical Starting Aid, Diagnostic Schematic

50FA - Air Intake System, Diagnostic Schematic

50FA - Fuel System, Diagnostic Schematic

50FA - Exhaust System, Diagnostic Schematic

50FA - Aftertreatment System, Diagnostic Schematic

50FA - Engine Controller, Diagnostic Schematic

50FA - DEF Dosing Unit Heater, Diagnostic Schematic

50FA - Viscous Fan Drive (Electrical), Diagnostic Schematic

B5504 - Sensor for Engine Oil Level, Circuit Test (6110R - 6135R)

B5504 - Sensor for Engine Oil Level, Circuit Test (6145R - 6215R)

K046 - Relay for Electrical Starting Aid, Circuit Test

R036 - Heating Element for Electrical Starting Aid, Circuit Test

R037 - Resistor for Monitoring the Heating Element of the Electrical Starting Aid, Circuit Test

S047 - LIN Bus Module (Position H), Circuit Test

Y009 - Viscous Fan Drive (Electrical), Circuit Test (6110R - 6135R)

Y009 - Viscous Fan Drive (Electrical), Circuit Test (6145R - 6215R)

Y107 - Proportional Solenoid Valve for Hydraulic Motor of Charge Air Cooler, Circuit Test (6155R - 6215R)

Y137 - Proportional Solenoid Valve for Charge Air Cooler, Circuit Test (6145R)

Group 50FB: Immobilizer

50FB - Immobilizer, Summary of References

50FB - Immobilizer, Diagnostic Schematic

Immobilizer, Test

W028 - Immobilizer Antenna, Circuit Test

Group 50FC: Fuel System

50FC - Fuel System, Summary of References

50FC - Fuel System, Diagnostic Schematic

B176 - Fuel Level Sensor, Circuit Test

M031 - Fuel Pump (Engines under 177 hp / 130 kW), Circuit Test

R002 - Heating Element of Fuel Preheater, Circuit Test

Y5501-1- Fuel Pump (Engines over 177 hp / 130 KW), Circuit Test

Group 50GA: PowrQuad™ Transmission

50GA - PowrQuad™ Transmission, Summary of References

50GA - PowrQuad™ Transmission (Sensors), Diagnostic Schematic

50GA - PowrQuad™ Transmission (Solenoid Valves), Diagnostic Schematic

50GA - PowrQuad™ Transmission (Switch), Diagnostic Schematic

50GA - PowrQuad™ Transmission (Wheel Sensors), Diagnostic Schematic

50GA - PowrQuad™ Transmission (Gas and Clutch Master), Diagnostic Schematic

50GA - PowrQuad™ Transmission (Reverse Drive Lever) Diagnostic Schematic

B007 - Transmission Oil Filter Pressure Switch, Circuit Test

B009-1 - Wheel Speed Sensor on Tractors with Creeper, Circuit Test

B009-2 - Wheel Speed Sensor on Tractors with Creeper, Circuit Test

B031 - Transmission Oil Pressure Switch, Circuit Test

B060 - Transmission Oil Temperature Sensor, Circuit Test

B065 - Clutch Pedal Potentiometer, Circuit Test

B078 - Hand Throttle Potentiometer, Circuit Test

B079-1 - Accelerator Pedal Potentiometer, Circuit Test

B104 - Transmission Output Speed Sensor, Circuit Test

B105 - Enable Pressure Sensor, Circuit Test

B111 - Hydraulic Oil Filter Sensor, Circuit Test

B172-1 - Transmission Output Speed Sensor, Circuit Test

B526 - Sensor for Diagnostic Oil Pressure, Circuit Test

K05/03_LCS - Come-Home Connector (PowrQuad™ Transmission), Circuit Test

S114 - Park Lock Switch, Circuit Test

S125 - Gear Selector Switch, Circuit Test

A162 - Reverse Drive Lever (PowrQuad™ Transmission), Circuit Test

S158 - Gear Selector Switch, Auto Mode and Clutch, Circuit Test

Y033 - Forward Solenoid Valve, Circuit Test

Y036 - Reverse Solenoid Valve, Circuit Test

Y038 - Proportional Solenoid Valve for Transmission Enable, Circuit Test

Y039 - Gear Selector Solenoid Valve K2, Circuit Test

Y040 - Gear Selector Solenoid Valve K1, Circuit Test

Group 50GB: AutoPowr™/IVT™ Transmission

50GB - AutoPowr™/IVT™ Transmission, Summary of References

50GB - AutoPowr™/IVT™ Transmission (Sensors), Diagnostic Schematic

50GB - AutoPowr™ / IVT™ Transmission (Solenoid Valves), Diagnostic Schematic

50GB - AutoPowr™ / IVT™ Transmission (Speed Control Lever), Diagnostic Schematic

50GB - AutoPowr™ / IVT™ Transmission (Come-Home Connector), Diagnostic Schematic

50GB - AutoPowr™/IVT™ Transmission (Reverse Drive Lever), Diagnostic Schematic

A163 - Reverse Drive Lever (AutoPowr™/IVT™ Transmission), Circuit Test

B1 - Transmission Input Speed Sensor (AutoPowr™/IVT™ Transmission), Circuit Test

B2 - Hydrostatic Speed Sensor (AutoPowr™/IVT™ Transmission), Circuit Test

B4 - Sensor for Transmission Output Speed (AutoPowr™/IVT™ Transmission), Circuit Test

B7 - Transmission Oil Temperature Sensor (AutoPowr™/IVT™ Transmission), Circuit Test

B8 - Sensor for Lube Oil Pressure, Circuit Test

B11 - Transmission Oil Pressure Switch, Circuit Test

B065 - Clutch Pedal Potentiometer, Circuit Test

B068 - Potentiometer for Speed Control Lever, Circuit Test

B084 - Wheel Speed Sensor (AutoPowr™/IVT™ Transmission), Circuit Test

B089 - Sensor for Speed of Front-Wheel Drive Axle (AutoPowr™/IVT™ Transmission), Circuit Test

B090 - Sensor for Park Lock Pressure, Circuit Test

B091 - Sensor for Suction Pressure (Charge Pump), Circuit Test

BG - Disk Brake Solenoid Valve, Circuit Test

K01/19_LCS - Transmission Enable Relay (AutoPowr™/IVT™ Transmission), Circuit Test

K1 - Clutch 1 Solenoid Valve, Circuit Test

K2 - Clutch 2 Solenoid Valve, Circuit Test

K3 - Clutch 3 Solenoid Valve, Circuit Test

K4 - Clutch 4 Solenoid Valve, Circuit Test

K05/03_LCS - Come-Home Connector (AutoPowr™/IVT™ Transmission), Circuit Test

KR - Proportional Solenoid Valve for Reverse Clutch, Circuit Test

KV - Proportional Solenoid Valve for Forward Clutch, Circuit Test

S4 - Transmission Oil Filter Pressure Switch, Circuit Test

S9 - Pressure Switch for Filter Bypass Valve (AutoPowr™/IVT™ Transmission), Circuit Test

S070 - Sensor Unit for Speed Control Lever, Circuit Test

Y1 - Proportional Solenoid Valve 1 for Hydrostatic Unit, Circuit Test

Y2 - Proportional Solenoid Valve 2 for Hydrostatic Unit, Circuit Test

Y5 - Park Lock Solenoid Valve 1, Circuit Test

Y16-2 - Park Lock Solenoid Valve 2, Circuit Test

Group 50GC: DirectDrive Transmission

50GC - DirectDrive Transmission, Summary of References

50GC - DirectDrive Transmission (Electronic Transmission Control), Diagnostic Schematic

50GC - DirectDrive Transmission (Sensors), Diagnostic Schematic

50GC - DirectDrive Transmission (Actuators), Diagnostic Schematic

A164 - Reverse Drive Lever (DirectDrive Transmission), Circuit Test

B065 - Clutch Pedal Potentiometer (DirectDrive Transmission), Circuit Test

B223 - Transmission Output Speed Sensor (DirectDrive Transmission), Circuit Test

B224 - Wheel Speed Sensor (Channel 1) (DirectDrive Transmission), Circuit Test

B225 - Wheel Speed Sensor (Channel 2) (DirectDrive Transmission), Circuit Test

B238 - Sensor for Diagnostic Oil Pressure (DirectDrive Transmission), Circuit Test

B239 - Sensor for Transmission Oil Pressure (DirectDrive Transmission), Circuit Test

B240 - Sensor for Oil Pressure of Reverse Brake (DirectDrive Transmission), Circuit Test

B241 - Sensor for Oil Pressure of Forward Clutch (DirectDrive Transmission), Circuit Test

K05/03_LCS - Come-Home Connector (DirectDrive Transmission), Circuit Test

S071 - Shift Unit (DirectDrive Transmission), Circuit Test

Y015 - Park Lock Solenoids (DirectDrive Transmission), Circuit Test

Y098-1 - Proportional Solenoid Valve for Clutch for Side Shaft 1 (DirectDrive Transmission), Circuit Test

Y098-2 - Proportional Solenoid Valve for Clutch for Side Shaft 2 (DirectDrive Transmission), Circuit Test

Y108-1/3/5/7 - Solenoids for Gears on Side Shaft 1 (DirectDrive Transmission), Circuit Test

Y108-2/4/6/8 - Solenoids for Gears on Side Shaft 2 (DirectDrive Transmission), Circuit Test

Y109-1/2 - Solenoids for Ranges A/B (DirectDrive Transmission), Circuit Test

Y112-1 - Range C Solenoid (DirectDrive Transmission), Circuit Test

Y110 - Proportional Solenoid Valve for Forward Clutch (DirectDrive Transmission), Circuit Test

Y111 - Proportional Solenoid Valve for Reverse Brake (DirectDrive Transmission), Circuit Test

Group 50GH: Differential Lock

50GH - Differential Lock, Summary of References

50GH - Differential Lock, Diagnostic Schematic

B139-2 - Steering Angle Sensor, Circuit Test

Y005 - Differential Lock Solenoid Valve, Circuit Test

Group 50GI: Front-Wheel Drive

50GI - Front-Wheel Drive, Summary of References

50GI - Front-Wheel Drive, Diagnostic Schematic

B139-2 - Steering Angle Sensor, Circuit Test

Y003 - Solenoid Valve for Front-Wheel Drive, Circuit Test

Group 50GJ: Rear PTO

50GJ - Rear PTO, Summary of References

50GJ - Rear PTO, Diagnostic Schematic

50GJ - Solenoid, PTO Speed Control (PAPTOS), Diagnostic Schematic

50GJ - Solenoid, PTO Speed Control (PAPTOS) (DirectDrive Transmission), Diagnostic Schematic

B006 - Rear PTO Speed Sensor, Circuit Test

B179 - PTO Shaft Spline Identifier Switch, Circuit Test

S021 - Rear PTO Switch, Circuit Test

S044 - Left Remote Control Switch for Rear PTO, Circuit Test

S079 - Rear PTO Switch (CommandARM™), Circuit Test

S121 - Right Remote Control Switch for Rear PTO, Circuit Test

Y073 - Solenoid for PTO Speed 2 (PAPTOS), Circuit Test

Y074 - Solenoid for PTO Speed 1 (PAPTOS), Circuit Test

Y075 - Solenoid for PTO Speed 3 (PAPTOS), Circuit Test

Y081 - Proportional Solenoid Valve for Power-Assisted Rear PTO Shifting (PAPTOS), Circuit Test

Y113-1/2/3 - Solenoids for PTO Speed (PAPTOS) (DirectDrive Transmission), Circuit Test

Group 50GK: Front PTO

50GK - Front PTO, Summary of References

50GK - Front PTO (without Front Hitch), Diagnostic Schematic

50GK - Front PTO (with Front Hitch), Diagnostic Schematic

B058 - Front PTO Speed Sensor, Circuit Test

S006 - Front PTO Switch, Circuit Test

S078 - Front PTO Switch (CommandARM™), Circuit Test

Y094 - Proportional Solenoid Valve for Front PTO, Circuit Test

Group 50GL: Brakes

50GL - Brakes, Summary of References

50GL - Brake Pedal Sensors (AutoPowr™/IVT™ Transmission or DirectDrive Transmission), Diagnostic Schematic

50GL - Brake Pedal Sensors (PowrQuad™ Transmission), Diagnostic Schematic

50GL - Air Brake System, Diagnostic Schematic

50GL - Brake Lights, Diagnostic Schematic

50GL - Hydraulic Trailer Brake, Diagnostic Schematic

B112 - Brake Pedal Sensor Unit (PowrQuad™ Transmission), Circuit Test

B113 - Sensor for Brake Pedal Lock, Circuit Test

B229 - Left Brake Pedal Sensor Unit (AutoPowr™/IVT™ Transmission), Circuit Test

B230 - Right Brake Pedal Sensor Unit (AutoPowr™/IVT™ Transmission), Circuit Test

B231 - Sensor for Air-Brake Pressure, Circuit Test

E072 - Left Brake Light, Circuit Test

E073 - Right Brake Light, Circuit Test

S144 - Pressure Switch for Air Trailer Brakes, Circuit Test

Y115 - Solenoid Valve for Hydraulic Trailer Brake, Circuit Test

Y117 - Solenoid Valve for Air Trailer Brakes, Circuit Test

Y5005 - Compressor Clutch for Air Trailer Brakes, Circuit Test

Group 50HA: Rear Hitch

50HA - Rear Hitch, Summary of References

50HA - Rear Hitch (Sensors), Diagnostic Schematic

50HA - Rear Hitch (ECE Switch), Diagnostic Schematic

50HA - Rear Hitch (SAE Switch), Diagnostic Schematic

50HA - Rear Hitch (Actuators), Diagnostic Schematic

50HA - Rear Hitch (LIN Bus Module), Diagnostic Schematic

B019 - Right Draft Sensor, Circuit Test

B020 - Left Draft Sensor, Circuit Test

B021 - Rear Hitch Position Sensor, Circuit Test

B041 - Draft Sensor, Circuit Test

M045 - Stepper Motor for Rear Hitch, Circuit Test

S023 - Right Remote Control Switch for Rear Hitch, Circuit Test

S068 - Left Remote Control Switch for Rear Hitch, Circuit Test

S200 - Switch for Remote Control of Hitch (SAE), Circuit Test

Y071 - Solenoid Valve for Draft Link Stabilizer (Float Position) (HSB), Circuit Test

Y072 - Solenoid Valve for Draft Link Stabilizer (No-Float Position) (HSB), Circuit Test

Group 50HB: E-SCV Selective Control Valves

50HB - Electrical System - E-SCVs, Summary of References

50HB - Rear Selective Control Valves, Actuation (CommandARM™), Diagnostic Schematic

50HB - Rear Selective Control Valves, Actuation (Shift Console), Diagnostic Schematic

50HB - Rear Selective Control Valves, Stepper Motors, Diagnostic Schematic

50HB - Rear Selective Control Valves, Remote Control, Diagnostic Schematic

50HB - Front Selective Control Valves, Stepper Motors, Diagnostic Schematic

A036 - Stepper Motor for E-SCV I, Circuit Test

A037 - Stepper Motor for E-SCV II, Circuit Test

A038 - Stepper Motor for E-SCV III, Circuit Test

A039 - Stepper Motor for E-SCV IV, Circuit Test

A040 - Stepper Motor for E-SCV V, Circuit Test

A041 - Stepper Motor for E-SCV VI, Circuit Test

M012 - Stepper Motor for E-SCV XI, Circuit Test

M013 - Stepper Motor for E-SCV XII, Circuit Test

M014 - Stepper Motor for E-SCV XIII, Circuit Test

M015 - Stepper Motor for E-SCV X, Circuit Test

S091 - Control Lever for E-SCV I, Circuit Test

S097 - Control Lever for E-SCV II, Circuit Test

S098 - Control Lever for E-SCV III, Circuit Test

S099 - Control Lever for E-SCV IV, Circuit Test

S134 - Left Remote Control Switch for E-SCVs, Circuit Test

S152 - Right Remote Control Switch for E-SCVs, Circuit Test

Group 50HD: Suspended Front-Wheel Drive Axle

50HD - Suspended Front-Wheel Drive Axle, Summary of References

50HD - Suspended Front-Wheel Drive Axle (M50), Diagnostic Schematic

50HD - Suspended Front-Wheel Drive Axle (M400), Diagnostic Schematic

B053 - Sensor for Position of Suspended Front-Wheel Drive Axle (M50), Circuit Test

B053 - Sensor for Position of Suspended Front-Wheel Drive Axle (M400), Circuit Test

B167 - Sensor for Oil Pressure of Suspended Front-Wheel Drive Axle (M50), Circuit Test

B167 - Sensor for Oil Pressure of Suspended Front-Wheel Drive Axle (M400), Circuit Test

Y066 - Solenoid Valve for Lowering the Suspended Front-Wheel Drive Axle (M50), Circuit Test

Y066 - Solenoid Valve for Lowering the Suspended Front-Wheel Drive Axle (M400), Circuit Test

Y067 - Solenoid Valve for Raising the Suspended Front-Wheel Drive Axle (M50), Circuit Test

Y067 - Solenoid Valve for Raising the Suspended Front-Wheel Drive Axle (M400), Circuit Test

Y068 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Reduction (M50), Circuit Test

Y068 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Reduction (M400), Circuit Test

Y069 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Build-Up (M50), Circuit Test

Y069 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Build-Up (M400), Circuit Test

Group 50HE: Cab Suspension

50HE - Cab Suspension, Summary of References

50HE- Cab Suspension, Diagnostic Schematic

B110 - Sensor for Position of Cab, Circuit Test

Y042 - Solenoid Valve for Lowering Cab Suspension, Circuit Test

Y043 - Solenoid Valve for Raising Cab Suspension, Circuit Test

Y103 - Proportional Solenoid Valve for Cab Suspension, Circuit Test

Group 50HF: Electro-Hydraulic Pick-Up Hitch (E-PUH)

50HF - Electro-Hydraulic Wagon Hitch (E-PUH), Summary of References

50HF - Electro-Hydraulic Wagon Hitch (E-PUH), Diagnostic Schematic

S124 - Switch for Electro-Hydraulic Pick-Up Hitch (E-PUH), Circuit Test

Y126 - Solenoid Valve for Electro-Hydraulic Pick-Up Hitch (E-PUH), Circuit Test

Group 50HH: Front Loader

50HH - Electrical System - Front Loader, Summary of References

50HH - Selective Control Valves, Multi-Function Lever (Shift Console), Diagnostic Schematic

50HH - Selective Control Valves, Mechanical Multi-Function Lever (DURA), Diagnostic Schematic

50HH - Front Loader RPT (Sensors), Diagnostic Schematic

50HH - Front Loader (Memo and Control Valves), Diagnostic Schematic

50HH - Front Loader Additional Functions, Diagnostic Schematic

50HH - Front Loader with Control Unit for Front Loader Automation (Sensors), Diagnostic Schematic

B022 - Sensor for Piston Rod Pressure (Loader Bucket), Circuit Test

B023 - Sensor for Piston Pressure, Loader Bucket, Circuit Test

B024 - Sensor for Piston Rod Pressure (Loader Boom), Circuit Test

B025 - Sensor for Piston Pressure (Loader Boom), Circuit Test

B029 - Sensor for Position of Loader Boom, Circuit Test

B030 - Sensor for Position of Loader Bucket, Circuit Test

B043 - Sensor 2 of Inertial Measurement Unit, Component Information

B218 - Sensor for Position of Loader Boom, Circuit Test

B219 - Sensor for Position of Loader Bucket, Circuit Test

K01/02_PLB - Relay for Memo Function (Front Loader), Circuit Test

K01/03_PLB - Relay for Diverter Valve 2 (Front Loader), Circuit Test

K01/04_PLB - Relay for Diverter Valve 1 (Front Loader), Circuit Test

K070 - Relay for Hydraulic Quick Release (Front Loader), Circuit Test

S171 - Mechanical Multi-Function Lever (DURA), Circuit Test

S205 - Switch for Hydraulic Quick Release (Front Loader), Circuit Test

S208 - Switch for Front Loader Worklights, Circuit Test

X455F - Connector for Memo Function Switch (Front Loader), Circuit Test

X811M - Connection Point between Wiring Harness W762/1 and Front Loader, Circuit Test

X1268F - Connector for Memo Function and Control Valves, Circuit Test

X1278F - Connector for Hitch Dampening, Circuit Test

Group 50HI: Front Hitch

50HI - Front Hitch, Summary of References

50HI - Front Hitch, Diagnostic Schematic

B188 - Sensor for Front Hitch Position, Circuit Test

S174 - Switch for Remote Control of Front Hitch, Circuit Test

Y101 - Raise and Lower Valve for Front Hitch, Circuit Test

Y102 - Switch Valve of Front Hitch, Circuit Test

Group 50IA: Display

50IA - Display, Summary of References

50IA - CommandCenter™ and Monitors, Diagnostic Schematic

P031 - CommandCenter™ (CommandARM™), Circuit Test

P032 - CommandCenter™ (Shift Console), Circuit Test

Group 50IB: Cab Switch Module

50IB - Cab Switch Module, Summary of References

50IB - Cab Switch Module, Diagnostic Schematic

50IB - CommandARM™ Switch Module, Diagnostic Schematic

S175 - Control Unit for Cab Switch Module, Circuit Test

Group 50IC: Video Cameras

50IC - Video Cameras, Summary of References

50IC - Video Cameras, Diagnostic Schematic

A157 - Video Camera 1, Circuit Test

A158 - Video Camera 2, Circuit Test

Group 50ID: LIN Bus Modules

50ID - LIN Bus Modules, Summary of References

50ID - LIN Bus 1, Diagnostic Schematic

50ID - LIN Bus 2, Diagnostic Schematic

50ID - LIN Bus 3, Diagnostic Schematic

50ID - LIN Bus 4, Diagnostic Schematic

50ID - LIN Bus - Alternator, Diagnostic Schematic

LIN Bus Shift Console, Diagnostic Schematic

A023 - LIN Bus Module (Shift Console), Circuit Test

S046 - Module with Button for Transport Lock of the E-SCVs and Button for ISOBUS (ISO), Circuit Test

S047 - LIN Bus Module (Position H), Circuit Test

S048 - LIN Bus Module (Position W), Circuit Test

S050 - LIN Bus Module (Position D), Circuit Test

S051 - LIN Bus Module (Position E), Circuit Test

S052 - LIN Bus Module (Position P), Circuit Test

S053 - LIN Bus Module (Position F), Circuit Test

S054 - LIN Bus Module (Position G), Circuit Test

S057 - LIN Bus Module (Position M), Circuit Test

S064 - LIN Bus Module (Positions F and G), Circuit Test

S065 - LIN Bus Module (Position S), Circuit Test

S066 - LIN Bus Module (Position K), Circuit Test

S075 - LIN Bus Module (Multi-Function Lever), Circuit Test

Voltage Check of the LIN Bus 1

Voltage Check of the LIN Bus 2

Voltage Check of the LIN Bus 3

Voltage Check of the LIN Bus 4

Voltage Check of the LIN Bus - Shift Console

Voltage Check of the Alternator LIN Bus

Group 50JA: Bus systems

50JA - CAN Bus Systems, Summary of References

50JA - Vehicle CAN Bus, Diagnostic Schematic

50JA - Implement CAN Bus, Diagnostic Schematic

50JA - Drivetrain CAN Bus, Diagnostic Schematic

50JA - CAN Bus for E-SCV and Rear Hitch, Diagnostic Schematic

50JA - CAN Bus for E-SCV and Front Hitch (Diagnostic Schematic)

50JA - Engine CAN Bus, Diagnostic Schematic

50JA - CAN Bus (Aftertreatment), Diagnostic Schematic

CAN Bus Communication Fault Checks

Voltage Check of Vehicle CAN Bus

Voltage Check of Drivetrain CAN Bus

Check of the Implement CAN Bus

Voltage Check of the E-SCV and Front Hitch CAN Bus

Voltage Check of the CAN Bus for E-SCV and Rear Hitch

Voltage Check of Engine CAN Bus

Voltage Check of Aftertreatment CAN Bus

Group 50X: Ground Connections

Ground Connections, Summary of References

50X - Ground Connections, Diagnostic Schematic

XGND1A - Diagnostic Schematic

XGND3_XGND55_XGND65 - Diagnostic Schematic

XGND5A_XGND53 - Diagnostic Schematic

XGND9 - Diagnostic Schematic

XGND9C_XGND72 - Diagnostic Schematic

XGND10 - Diagnostic Schematic

XGND16 - Diagnostic Schematic

XGND17 - Diagnostic Schematic

XGND40_XGND44_XGND45_XGND46 - Diagnostic Schematic

XGND43A - Diagnostic Schematic

XGND51 - Diagnostic Schematic

XGND52 - Diagnostic Schematic

XGND60 - Diagnostic Schematic

XGND64 - Diagnostic Schematic

XGND65A_XGND73 - Diagnostic Schematic

XGND74 - Diagnostic Schematic

XGND_DPT1 - Diagnostic Schematic

XGND_DPT2 - Diagnostic Schematic

Group 50ZZ: Electronic Control Units

50ZZ - Electronic Control Units - Summary of References

50ZZ - Roof Control Unit, Test

50ZZ - Roof Control Unit (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Roof Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Front Chassis Control Unit, Test

50ZZ - Front Chassis Control Unit (M50) (Power Supply Circuit and Ground Circuit) Diagnostic Schematic

50ZZ - Front Chassis Control Unit (M400) (Power Supply Circuit and Ground Circuit) Diagnostic Schematic

50ZZ - Front Chassis Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Front Chassis Control Unit (M50), Test of 5-V Supply Voltage Circuit

50ZZ - Front Chassis Control Unit (M400) (5-V Supply Voltage Circuit), Diagnostic Schematic

50ZZ - Front Chassis Control Unit (M400), Test of 5-V Supply Voltage Circuit

50ZZ - Cab Switch Module Control Unit, Test

50ZZ - Cab Switch Module Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Engine Control Unit, Test

50ZZ - Engine Control Unit, Power Supply Circuit and Ground Circuit, Diagnostic Schematic

50ZZ - Engine Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Immobilizer Control Unit, Test

50ZZ - Immobilizer Control Unit (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Immobilizer Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Cab Control Unit, Test

50ZZ - Cab Control Unit (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Cab Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Cab Control Unit (5-V Supply Voltage Circuit), Diagnostic Schematic

50ZZ - Cab Control Unit, Test of 5-V Supply Voltage Circuit

50ZZ - Cab Control Unit (12-V Supply Voltage Circuit), Diagnostic Schematic

50ZZ - Cab Control Unit, Test of 12-V Supply Voltage Circuit

50ZZ - Air Conditioner Control Unit, Test

50ZZ - Air Conditioner Control Unit (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Air Conditioner Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Air Conditioner Control Unit (5-V Supply Voltage Circuit), Diagnostic Schematic

50ZZ - Air Conditioner Control Unit, Test of 5-V Supply Voltage Circuit

50ZZ - Steering Control Unit (AutoTrac™), Test

50ZZ - Steering Control Unit (AutoTrac™), (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Steering Control Unit (AutoTrac™), Test of Power Supply Circuit and Ground Circuit

50ZZ - Instrument Unit, Test

50ZZ - Instrument Unit (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Instrument Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - CommandCenter™, Test

50ZZ - Control Unit in the CommandARM™, Test

50ZZ - Control Unit in the CommandARM™ (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Control Unit in the CommandARM™, Test of Power Supply Circuit and Ground Circuit

50ZZ - Control Unit in the CommandARM™ (12-V Supply Voltage Circuit), Diagnostic Schematic

50ZZ - Control Unit in the CommandArm™, Test of 12-V Supply Voltage Circuit

50ZZ - Rear Chassis Control Unit, Test

50ZZ - Rear Chassis Control Unit (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Rear Chassis Control Unit, Test of Power Supply Circuit and Ground Circuit

50ZZ - Rear Chassis Control Unit (5-V Supply Voltage Circuit), Diagnostic Schematic

50ZZ - Rear Chassis Control Unit, Test of 5-V Supply Voltage Circuit

50ZZ - Rear Chassis Control Unit (12-V Supply Voltage Circuits), Diagnostic Schematic

50ZZ - Rear Chassis Control Unit, Test of 12-V Supply Voltage Circuit

50ZZ - Control Unit for Power-Assisted Rear PTO Shifting, Test

50ZZ - Control Unit for Power-Assisted Rear PTO Shifting (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Control Unit for Power-Assisted Rear PTO Shifting, Test of Power Supply Circuit and Ground Circuit

50ZZ - Transmission Control Unit (AutoPowr™/IVT™), Test

50ZZ - Transmission Control Unit (AutoPowr™/IVT™) (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Transmission Control Unit (AutoPowr™/IVT™), Test of Power Supply Circuit and Ground Circuit

50ZZ - Control Unit for Gear Shifting (DirectDrive Transmission), Test

50ZZ - Control Unit for Gear Shifting (DirectDrive Transmission) (Power Supply Circuit and Ground Circuits), Diagnostic Schematic

50ZZ - Control Unit for Gear Shifting (DirectDrive Transmission), Test of Power Supply Circuit and Ground Circuit

50ZZ - Control Unit for Range Shifting (DirectDrive Transmission), Test

50ZZ - Control Unit for Range Shifting (DirectDrive Transmission) (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Control Unit for Range Shifting (DirectDrive Transmission), Test of Power Supply Circuit and Ground Circuit

50ZZ - Control Unit for Range Shifting (DirectDrive Transmission), Test of 5-V Supply Voltage Circuit

50ZZ - Control Unit for Range Shifting (DirectDrive Transmission), Test of 12-V Supply Voltage Circuit

50ZZ - Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote), Test

50ZZ - Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote), Test of Power Supply Circuit and Ground Circuit

50ZZ - Radio, Test

50ZZ - Radio, Test of Power Supply Circuit and Ground Circuit

50ZZ - Control Unit for John Deere Machine Sync, Test of Power Supply Circuit and Ground Circuit

50ZZ - Processor 4100/4600, Test

50ZZ - Processor 4100/4600 (Power Supply Circuit and Ground Circuit), Diagnostic Schematic

50ZZ - Processor 4100/4600, Test of Power Supply Circuit and Ground Circuit

50ZZ - Wake-Up Voltage from Door Switch, Diagnostic Schematic

50ZZ - Wake-Up Voltage from Door Switch, Circuit Test

50ZZ - Wake-Up Voltage from Hazard Flashers, Diagnostic Schematic

50ZZ - Wake-Up Voltage from Hazard Flashers, Circuit Test

50ZZ - Wake-Up Voltage from Cab Control Unit, Diagnostic Schematic

50ZZ - Wake-Up Voltage from Cab Control Unit, Circuit Test

50ZZ - Keep-Alive Voltage for Lights, Diagnostic Schematic

50ZZ - Keep-Alive Voltage for Lights, Circuit Test

50ZZ - Keep-Alive Voltage for Park Lock, Diagnostic Schematic

50ZZ - Keep-Alive Voltage for Park Lock, Circuit Test

50ZZ - Keep-Alive Voltage for Cab Control Unit, Diagnostic Schematic

50ZZ - Keep-Alive Voltage for Cab Control Unit, Circuit Test

Section 245: Electronic Control Units

Group 05: Electronic Control Units - General Information

Electronic Control Units - General Information, Summary of References

Electronic Control Units - Special Tools, Summary of References

JDG1753 Service Jumper Harness Kit Assembly Procedure

Operation and Entering the Diagnostic Addresses with CommandCenter™ (Customer Level)

Operation and Entering the Diagnostic Addresses with CommandCenter™ (Service Level)

Displaying and Deleting Diagnostic Trouble Codes with CommandCenter™

Procedure for Dealing with Diagnostic Trouble Codes

Instructions on Snapshot Captures of PTA Diagnostic Trouble Codes

Software Update Package SUP15_03 (PSI28)

Group 10B: Electronic Control Units - Interactive Tests and Calibrations

Electronic Control Units - Interactive Tests and Calibrations, Summary of References

Procedure in the Event of Problems with Interactive Calibration

Procedure in the Event of Problems with Interactive Tests

General - Interactive Test, Control Unit Information and Input Addresses

ECU - Interactive Tests

EIC - Interactive Test, Engine Power Test

PTA - Interactive Test, Check the Hydrostatic Unit

SFA - Interactive Test, Check the Sensor for Oil Pressure of the Suspended Front-Wheel Drive Axle

ATC - Interactive Calibration, Calibration of Automatic Temperature Control

CCU - Interactive Calibration, Rear Tire (SRI) Exchange

CSC - Interactive Calibration, Calibration of Cab Suspension

CSC - Interactive Calibration, Calibration of Cab Suspension Proportional Valve

ECU - Interactive Calibrations

ETC - Interactive Calibration, Calibration of Air-Conditioning System

HCC - Interactive Calibration, Calibration of Hitch

OIC - Interactive Calibration, Calibration of Brakes

PTA - Interactive Calibration, AutoPowr™/IVT™ - Calibration of Transmission

PTD - Interactive Calibration, Calibration of DirectDrive Transmission

PTQ - Interactive Calibration, Calibration of PowrQuad™ Transmission

RPT - Interactive Calibration, Calibration of Rear PTO

SCC - Interactive Calibration, Valve Configuration

SCO - Interactive Calibration, Valve Configuration

SCO - Interactive Calibration, Selective Control Valve E-SCV X

SFA - Interactive Calibration, Calibration of Suspended Front-Wheel Drive Axle

TIA - Change to Maximum Speed

TID - Change to Maximum Speed

TIQ - Change to Maximum Speed

XMC - Brake Calibration

XSC - Interactive Calibration, Calibration of Wheel Angle Sensor

XSC - Interactive Calibration, Calibration of Steering Control Valve

CommandCenter™ - Calibrate and Set Dual-Beam Radar

AutoPowr™/IVT™ Transmission - Interactive Test for Lube Oil Pressure Test with Service ADVISOR™

AutoPowr™/IVT™ Transmission - Interactive Test of Hydrostatic Unit with Service ADVISOR™

Group 10C: Electronic Control Units - Information on Programming

Electronic Control Units - Information on Programming Electronic Control Units, Summary of References

Important Notes on Programming

Information on Control Units (Control Software) for Programming

Programming Control Units

Programming the CommandCenter™ Control Unit Via USB Drive

Download Tractor-Specific Software Information

Programming Control Units with Software Bundles

Procedure in the Event of a Programming Problem

Procedure in the Event of a Problem Programming VIN Control Units

VIN Security Fault Diagnosis

Software Server Update

Programming E-SCV Stepper Motors

Programming E-SCV Stepper Motors - Replacing Stepper Motor Only

Programming E-SCV Stepper Motors - Replace Stepper Motor and Valve

Programming E-SCV Stepper Motors - E-SCV Field Kit

Group 20: Electronic Control Units - Theory of Operation

Systems, Theory of Operation, Summary of References

Immobilizer Control Unit, Theory of Operation

AIC Control Software, Theory of Operation

ATC Control Software, Theory of Operation

CCU Control Software, Theory of Operation

CLC Control Software, Theory of Operation

CRU Control Software, Theory of Operation

CSC Control Software, Theory of Operation

CSM Control Software, Theory of Operation (CommandARM™)

CSM Control Software, Theory of Operation

ECU Control Software, Theory of Operation

EIC Control Software, Theory of Operation

ETC Control Software, Theory of Operation

FCC Control Software, Theory of Operation

GPM Control Software, Theory of Operation

HCC Control Software, Theory of Operation

ICA Control Software, Theory of Operation

JDL Control Software, Theory of Operation

MFC Control Software, Theory of Operation

OIC Control Software, Theory of Operation

PAP Control Software, Theory of Operation

PDU Control Software, Theory of Operation

PL1 Control Software, Theory of Operation

PL2 Control Software, Theory of Operation

PL3 Control Software, Theory of Operation

PL4 Control Software, Theory of Operation

PLC Control Software, Theory of Operation

PTA Control Software, Theory of Operation

PTD Control Software, Theory of Operation

PTF Control Software, Theory of Operation

PTQ Control Software, Theory of Operation

RLC Control Software, Theory of Operation

RPM Control Software, Theory of Operation

RPT Control Software, Theory of Operation

SB1 Control Software, Theory of Operation

SB2 Control Software, Theory of Operation

SB3 Control Software, Theory of Operation

SB4 Control Software, Theory of Operation

SB5 Control Software, Theory of Operation

SB6 Control Software, Theory of Operation

SBJ Control Software, Theory of Operation

SBK Control Software, Theory of Operation

SBL Control Software, Theory of Operation

SBM Control Software, Theory of Operation

SBN Control Software, Theory of Operation

SCC Control Software, Theory of Operation

SCO Control Software, Theory of Operation

TEC Control Software, Theory of Operation

TEI Control Software, Theory of Operation

SFA Control Software, Theory of Operation

TIA Control Software, Theory of Operation

TIQ Control Software, Theory of Operation

TID Control Software, Theory of Operation

VLC Control Software, Theory of Operation

VTI Control Software (CommandCenter™), Theory of Operation

VTI Control Software (GreenStar™ Display), Theory of Operation

XMC Control Software, Theory of Operation

XSC Control Software, Theory of Operation

Group Immobilizer: Immobilizer Control Unit

Immobilizer Control Unit, Summary of References

Immobilizer Control Unit, Summary of Addresses

Immobilizer Control Unit - Summary of Calibration and Input Addresses

Group AIC: AIC Control Software

AIC Control Software, Summary of References

AIC Control Software, Summary of Addresses

AIC Control Software - Summary of Calibration and Input Addresses

AIC 002 - Control Software Beep Mode

AIC 010 - Speed Control Lever - AutoPowr™/IVT™ Transmission without CommandPRO™ Joystick, Voltage

AIC 011 - Potentiometer for Speed Control Lever Channel 1 (AutoPowr™/IVT™ Transmission without CommandPRO™ Joystick), Voltage

AIC 012 - Potentiometer for Speed Control Lever Channel 2 (AutoPowr™/IVT™ Transmission without CommandPRO™ Joystick), Voltage

AIC 013 - Speed Control Lever - AutoPowr™/IVT™ Transmission without CommandPRO™ Joystick, Voltage

AIC 018 - Sensor Unit for Speed Control Lever - Speed Wheel - Speed Increase (AutoPowr™/IVT™ Transmission without CommandPRO™ Joystick), Status

AIC 019 - Sensor Unit for Speed Control Lever - Speed Wheel - Speed Decrease (AutoPowr™/IVT™ Transmission without CommandPRO™ Joystick), Status

AIC 025 - Hand Throttle Control Lever, Status

AIC 026 - Switch for iTEC™ Program Selection and AutoTrac™, Status

AIC 027 - Controls for Engine Speed Control, Status

AIC 028 - Controls for Hitch Control, Status

AIC 029 - Additional Controls for Hitch Control, Status

AIC 034 - Quick Raise/Lower Switch of Hitch Control (PowrQuad™ Transmission), Status

AIC 035 - Hitch Control Potentiometer (PowrQuad™ Transmission), Voltage

AIC 036 - Hitch Control, Upper End Point (PowrQuad™ Transmission), Calibrated Voltage

AIC 037 - Hitch Control, Lower End Point (PowrQuad™ Transmission), Calibrated Voltage

AIC 040 - LIN Bus Module (Hitch Control - Position M), Status

AIC 041 - LIN Bus Module (Position D - Right), Status

AIC 042 - LIN Bus Module (Position E - Left), Status

AIC 043 - LIN Bus Module (Position E - Right), Status

AIC 044 - LIN Bus Module (Position F - Left), Status

AIC 045 - LIN Bus Module (Position F - Right), Status

AIC 046 - LIN Bus Module (Position G - Left), Status

AIC 047 - LIN Bus Module (Position G - Right), Status

AIC 048 - LIN Bus Module (Position P - Left), Status

AIC 049 - LIN Bus Module (Position P - Right), Status

AIC 050 - Dome Light Dimmer, Status

AIC 051 - Cruise Control Switch, Status

AIC 053 - Transport Position Switch of the Hitch Control, Status

AIC 060 - Rear PTO Switch, Status

AIC 061 - Front PTO Switch, Status

AIC 070 - Dome Light Dimmer, Status

AIC 074 - Cruise Control Switch, Status

AIC 075 - Transport Position Switch of the Hitch Control, Status

AIC 090 - Supply Voltage (BAT), Voltage

AIC 091 - Supply Voltage (ELX), Voltage

AIC 092 - 12-V Supply Voltage 1, Status

AIC 093 - 12-V Supply Voltage 2, Status

AIC 094 - 5-V Supply Voltage 1, Status

AIC 095 - 5-V Supply Voltage 2, Status

AIC 140 - Fine-Tuning of SCV Control Unit (Upper Range), Configuration

AIC 141 - Fine-Tuning of SCV Control Unit (Lower Range), Configuration

AIC 159 - LIN Bus Diagnostic Address, Configuration

Group ATC: ATC Control Software

ATC Control Software - Summary of References

ATC Control Software - Summary of Addresses

ATC Control Software - Summary of Calibration and Input Addresses

ATC 002 - Beep Mode of Control Software

ATC 003 - Circulation Fan Motor, Status

ATC 004 - Air Conditioning Compressor Clutch, Status

ATC 005 - Fan Speed, Shown in Percent

ATC 006 - Desired Inside Temperature

ATC 007 - Air Distribution Mode, Status

ATC 008 - Temperature Inside Cab

ATC 009 - Outlet Temperature, Setpoint

ATC 010 - Temperature in Air Outlet Passage

ATC 011 - Heater Valve Position, Status

ATC 012 - Engine Coolant Temperature

ATC 013 - Ambient Temperature at Front

ATC 014 - Ambient Temperature at Rear

ATC 017 - Refrigerant Pressure on Pressure Side

ATC 018 - Defog Sensor, Frequency

ATC 019 - Pressurizer Fan Motor for Pressure Inside Cab, Status

ATC 020 - Evaporator Core Temperature

ATC 022 - Heater Valve, Calibration

ATC 023 - Actuator for Air Distribution, Calibration

ATC 026 - Sensor for Ambient Temperature (at Front), Configuration

ATC 027 - Sensor for Ambient Temperature (at Rear), Configuration

ATC 028 - Defog Sensor, Configuration

ATC 029 - Sensor for Refrigerant Pressure, Configuration

ATC 030 - Pressurizer Fan Motor for Pressure Inside Cab, Configuration

ATC 032 - Control of Compressor Clutch, Configuration

ATC 033 - Displayed Temperature, Configuration

ATC 035 - Activation of Recirculating Fan, Configuration

ATC 038 - Correction Factor for Ambient Air Temperature, Configuration

ATC 039 - Error Time of Sensor for Evaporator Core Temperature, Configuration

ATC 040 - Temperature Inside Cab, Voltage

ATC 041 - Sensor for Outlet Air Temperature, Voltage

ATC 042 - Sensor for Ambient Air Temperature (Front), Voltage

ATC 043 - Sensor for Ambient Air Temperature (Rear), Voltage

ATC 044 - Refrigerant Pressure Sensor, Voltage

ATC 045 - Evaporator Temperature Sensor, Voltage

ATC 046 - PWM Polarity of Fan, Configuration

ATC 047 - PWM Output Period, Configuration

ATC 048 - Minimum Evaporator Core Temperature, Configuration

ATC 049 - Outlet Air Temperature, Configuration

ATC 050 - Minimum Fan Voltage in Automatic Mode, Configuration

ATC 051 - Minimum Fan Speed in Manual Mode, Configuration

ATC 052 - Backlighting, Configuration

ATC 053 - Ambient Temperature Setting 1, Configuration

ATC 054 - Ambient Temperature Setting 2, Configuration

ATC 055 - Ambient Temperature Setting 3, Configuration

ATC 056 - Ambient Temperature Setting 4, Configuration

ATC 057 - Evaporator Temperature Setting 1, Configuration

ATC 058 - Evaporator Temperature Setting 2, Configuration

ATC 059 - Evaporator Temperature Setting 3, Configuration

ATC 060 - Evaporator Temperature Setting 4, Configuration

ATC 061 - Evaporator Temperature Setting 5, Configuration

ATC 062 - Maximum Circulation Fan Speed in Automatic and Manual Mode, Configuration

ATC 063 - Minimum Circulation Fan Speed in Automatic Mode, Configuration

ATC 064 - Maximum Circulation Fan Speed in Automatic Mode, Configuration

ATC 065 - Closing Range of the Heater Valve, Configuration

ATC 066 - Opening Range of the Heater Valve, Configuration

ATC 067 - A/C Shutdown During Transfer/Transport, Configuration

ATC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

ATC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group CCU: CCU Control Software

CCU Control Software - Summary of References

CCU Control Software - Summary of Addresses

CCU Control Software - Summary of Calibration and Input Addresses

CCU 002 - Control Software Beep Mode

CCU 003 - Wheel Speed Signal and Radar Speed Signal, Status

CCU 004 - Fuel Level Sensor, Voltage

CCU 005 - Implement Switch, Status

CCU 007 - Transmission Oil Sensors, Status

CCU 008 - Transmission Oil Temperature Sensor, Voltage

CCU 009 - Hydraulic Oil Filter Sensor, Status

CCU 010 - Warning Light Control, Status

CCU 011 - Pressure Sensor Diagnostics, Pressure

CCU 012 - Pressure Sensor Diagnostics, Voltage

CCU 014 - Sensor for Air-Brake System, Voltage

CCU 020 - Pressure Sensor Diagnostics, Configuration

CCU 026 - Transmission Oil Monitoring, Configuration

CCU 027 - Engine Speed at which the Transmission Oil Monitoring should Begin, Configuration

CCU 028 - Transmission Oil Temperature Sensor

CCU 032 - Wheel Speed for ISO Socket, Configuration

CCU 033 - Ground Speed Signal, Status

CCU 037 - Reception of Transmission Oil Information, Configuration

CCU 038 - Differential Lock Theory of Operation, Configuration

CCU 039 - Differential Lock Theory of Operation (Technician Setting), Configuration

CCU 040 - CSM CAN BUS Messages, Status

CCU 041 - CSM CAN BUS Messages, Status

CCU 042 - Front-Wheel Drive, Status

CCU 043 - Differential Lock, Status

CCU 044 - Front-Wheel Drive Output, Status

CCU 045 - Front-Wheel Drive Theory of Operation (Technician Setting), Configuration

CCU 048 - Front-Wheel Drive, Configuration

CCU 049 - Differential Lock, Configuration

CCU 059 - Frequency for Wheel Speed

CCU 060 - Ground Speed Sensor (Radar), Configuration

CCU 061 - Signal for Wheel Speed for ISO Socket

CCU 062 - Wheel Speed Signal

CCU 063 - Trailer Brake System, Configuration

CCU 064 - Travel Speed

CCU 065 - Air-Brake System, Configuration

CCU 067 - Electronic Service Check, Hydraulic Oil Level, Status

CCU 068 - Electronic Service Check, Hydraulic Oil Temperature, Status

CCU 073 - Electronic Service Check, Configuration

CCU 075 - Implement Switch, Configuration

CCU076 - Battery Cut-Off Switch, Configuration

CCU 077 - Correction for Battery Temperature Calculation, Configuration

CCU 080 - LIN Bus Signal Alternator, Configuration

CCU 081 - Alternator Charging Log, Configuration

CCU 082 - Alternator, Configuration

CCU 083 - Maximum Approved Tire Index (SRI) for Rear Wheel, Status

CCU 084 - Minimum Approved Tire Index (SRI) for Rear Wheel, Status

CCU 085 - Tire Index (SRI) of Mounted Rear Wheel, Status

CCU 089 - Tire Index (SRI) of Mounted Front Wheel, Status

CCU 091 - Electronic Service Check, Transmission Oil Maximum Level, Configuration

CCU 092 - Electronic Service Check, Transmission Oil Minimum Level, Configuration

CCU 097 - Low Fuel Level Acoustic Alarm, Configuration

CCU 098 - Low Fuel Level Warning on Display, Configuration

CCU 102 - Application, Configuration

CCU 110 - Supply Voltage, Configuration

CCU 144 - Wheel Angle Sensor, Factory Calibration

CCU 145 - Steering Angle Sensor, Calibration

CCU 147 - Executed Wheel Angle Calibration, Status

CCU 148 - Trouble Code Stored for Wheel Angle Calibration, Status

CCU 149 - Front Axle, Configuration

CCU 168 - Wheel Angle, Configuration

CCU 170 - Park Brake, Configuration

CCU 173 - Automatic Switch-Off of Front Wheel Drive Depending on Switch-Off Angle, Configuration

CCU 178 - Automatic Switch-Off of Differential Lock Depending on Switch-Off Angle, Configuration

CCU 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

CCU 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group CLC: CLC Control Software

CLC Control Software - Summary of References

CLC Control Software - Summary of Addresses

CLC Control Software - Summary of Calibration and Input Addresses

CLC 002 - Control Software Beep Mode

CLC 013 - Windshield Wiper Motor, Status

CLC 014 - Horn Switch, Status

CLC 015 - Switch for Park Position of Rear Window Wiper, Status

CLC 019 - Temperature of Cab Control Unit

CLC 020 - Turn Lights Signal Synchronization, Status

CLC 021 - Output for Acoustic Alarm, Display in Amps and Status

CLC 022 - Output for Left Tail Light and Extra-Wide Vehicle Warning Light (ECE), Display in Amps and Status

CLC 023 - Output for Right Tail Light and Extra-Wide Vehicle Warning Light (ECE), Display in Amps and Status

CLC 024 - Output for Trailer Brake Lights, Display in Amps and Status

CLC 025 - Output for Brake Lights, Display in Amps and Status

CLC 026 - Output for Trailer Brake Lights, Display in Amps and Status

CLC 029 - Output for Back-up Alarm, Display in Amps and Status

CLC 030 - Output for Worklight (Left) on Rear Fender, Display in Amps and Status

CLC 031 - Output for Worklight (Right) on Rear Fender, Display in Amps and Status

CLC 032 - Output for Pressurizer Fan Motor for Pressure Inside Cab, Display in Amps and Status

CLC 033 - Horn, Display in Amps and Status

CLC 034 - Windshield Wiper (Fast), Display in Amps and Status

CLC 035 - Windshield Wiper (Slow), Display in Amps and Status

CLC 038 - Backlighting of Switch Console, Status

CLC 039 - Backlighting of Control Device for Hitch, Status

CLC 040 - Voltage Supply for Socket (Implement CAN Bus), Display in Amps and Status

CLC 042 - Windshield Wiper (Output for Park Position), Display in Amps and Status

CLC 045 - Control Software Input Current, Display in Amps

CLC 046 - Supply Voltage (BAT)

CLC 053 - Lights and Backup Alarm, Configuration

CLC 054 - Time Setting at Acoustic Alarm, Configuration

CLC 056 - Tractor Series, Configuration

CLC 057 - Switched Output of Rear Implement Socket, Configuration

CLC 058 - Rear Implement Socket, Configuration

CLC 060 - Forced Shut-Off of Worklights, Status

CLC 061 - Backlighting, Configuration

CLC 062 - Windshield Wiper Motor, Configuration

CLC 075 - Pressurizer Fan Motor for Pressure Inside Cab, Configuration

CLC 099 - Stored Maximum Temperature of Control Unit

CLC 102 - Information on Temperature of Cab Control Unit (below - 40 °C), Display in %

CLC 103 - Information on Temperature of Cab Control Unit (from - 39 °C to 24 °C), Display in %

CLC 104 - Information on Temperature of Cab Control Unit (from 25 °C to 50 °C), Display in %

CLC 105 - Information on Temperature of Cab Control Unit (from 51 °C to 69 °C), Display in %

CLC 106 - Information on Temperature of Cab Control Unit (from 70 °C to 84 °C), Display in %

CLC 107 - Information on Temperature of Cab Control Unit (from 85 °C to 104 °C), Display in %

CLC 108 - Information on Temperature of Cab Control Unit (above 105 °C), Display in %

CLC 120 - Stored Maximum Output Current of Control Unit

CLC 121 - Voltage at Which the Stored Maximum Output Current of Control Unit was Determined

CLC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

CLC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group CRU: CRU Control Software

CRU Control Software - Summary of References

CRU Control Software - Summary of Addresses

CRU Control Software - Summary of Calibration and Input Addresses

CRU 003 - Supply Voltage

CRU 004 - Temperature of Radio

CRU 005 - Brightness of the Display, Configuration

CRU 006 - Time until Radio is Turned Off Automatically, Configuration

CRU 007 - Number of Speakers, Configuration

CRU 008 - Speaker Test, Configuration

CRU 009 - Country Settings, Configuration

CRU 010 - External Audio Source, Status

CRU 012 - Anti-Theft Device, Status

CRU 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

CRU 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group CSC: CSC Control Software

CSC Control Software - Summary of References

CSC Control Software - Summary of Addresses

CSC Control Software - Summary of Calibration and Input Addresses

CSC 002 - CSC Control Software Beep Mode

CSC 003 - Supply Voltage (BAT)

CSC 004 - 5-V Supply Voltage

CSC 005 - Cab Position Sensor, Voltage

CSC 006 - Solenoid Valve for Cab Suspension, Status

CSC 010 - Solenoid Valve for Raising Cab Suspension, Current

CSC 011 - Solenoid Valve for Lowering Cab Suspension, Current

CSC 012 - Commanded Damping, Percent

CSC 013 - Proportional Solenoid Valve for Cab Suspension, Commanded Current

CSC 014 - Proportional Solenoid Valve for Cab Suspension, Current

CSC 020 - Cab Position Sensor, Calibration

CSC 021 - Bleed Air from Cab Suspension

CSC 022 - Relieve Pressure at Cab Suspension

CSC 023 - Manual Raising of the Cab

CSC 024 - Setpoint for Damping of Cab Suspension, Configuration

CSC 030 - Cab Position Sensor - Upper Stop, Voltage

CSC 031 - Cab Position Sensor - Mid-Position, Voltage

CSC 032 - Cab Position Sensor - Lower Stop, Voltage

CSC 040 - Damping Value in MED Mode, Configuration

CSC 041 - Factory-Set Current Value for Proportional Valve, Status

CSC 042 - Factory Set Current Value for Proportional Valve - Lower Threshold, Status

CSC 043 - Factory Set Current Value for Proportional Valve - Upper Threshold, Status

CSC 097 - Calibration Parameter for Position Sensor ON/OFF, Configuration

CSC 099 - Password Query

CSC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

CSC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group CSMcommandarm: CSM Control Software (CommandARM™)

CSM Control Software (CommandARM™) - Summary of References

CSM Control Software (CommandARM™) - Summary of Addresses

CSM Control Software (CommandARM™) - Summary of Calibration and Input Addresses

CSM 010 (CommandARM™) - Fan Control, Status

CSM 011 (CommandARM™) - Radio Adjustment, Status

CSM 012 (CommandARM™) - Miscellaneous Switches, Status

CSM 020 (CommandARM™) - Miscellaneous Switches, Status

CSM 030 (CommandARM™) - Selection Wheel, Status

CSM 031 (CommandARM™) - LIN BUS module (Position W) Upper Row of Buttons, Status

CSM 032 (CommandARM™) - LIN BUS module (Position W) Lower Row of Buttons, Status

CSM 044 (CommandARM™) - Status Displays for Adjustment of Brightness, Configuration

CSM 045 (CommandARM™) - Adjustment of Brightness for Backlighting, Configuration

CSM 050 (CommandARM™) - Adjustment of Brightness for Backlighting, CAN BUS Message, Status

CSM 051 (CommandARM™) - LIN BUS module (Position K) Indicator Lights, Status on the CAN BUS

CSM 052 (CommandARM™) - LIN BUS module (Position H) Indicator Lights, Status on the CAN BUS

CSM 070 (CommandARM™) - Adjustment of Brightness for Backlighting of LIN BUS Module, Status

CSM 074 (CommandARM™) - LIN BUS module (Position K) Indicator Lights, Status on the LIN BUS

CSM 075 (CommandARM™) - LIN BUS module (Position H) Indicator Lights, Status on the LIN BUS

CSM 090 (CommandARM™)- Supply Voltage (BAT)

CSM 091 (CommandARM™)- Supply Voltage (ELX)

CSM 092 (CommandARM™) - 12-Volt Supply Voltage 1, Display in Milliamps and Status

CSM 093 (CommandARM™) - 12-Volt Supply Voltage 2, Display in Milliamps and Status

CSM 094 (CommandARM™) - 5-Volt Supply Voltage 1, Display in Milliamps and Status

CSM 095 (CommandARM™) - 5-Volt Supply Voltage 2, Display in Milliamps and Status

CSM 159 (CommandARM™) - LIN BUS Module, Status Update

CSM 245 (CommandARM™) - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

CSM 246 (CommandARM™) - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group CSM: CSM Control Software

CSM Control Software - Summary of References

CSM Control Software - Summary of Addresses

CSM Control Software - Summary of Calibration and Input Addresses

CSM 010 - Fan Control, Status

CSM 011 - Radio Adjustment, Status

CSM 012 - Miscellaneous Switches, Status

CSM 020 - Miscellaneous Switches, Status

CSM 030 - Selection Wheel, Status

CSM 031 - Miscellaneous Switches, Status

CSM 032 - Miscellaneous Switches, Status

CSM 044 - Status Displays for Adjustment of Brightness, Configuration

CSM 045 - Adjustment of Brightness for Backlighting, Configuration

CSM 051 - Miscellaneous Indicator Light Switches, Status on the CAN Bus

CSM 052 - Button for Front-Wheel Drive and Differential Lock, Status on the CAN BUS

CSM 070 - Adjustment of Brightness for Backlighting of LIN BUS Module, Status

CSM 074 - LIN BUS Module Indicator Lights, Status on the LIN BUS

CSM 075 - LIN BUS Module Indicator Lights, Status on the LIN BUS

CSM 090 - Supply Voltage (BAT)

CSM 091 - Supply Voltage (ELX)

CSM 100 - Air Conditioning, Configuration

CSM 101 - Air Circulation Button, Configuration

CSM 102 - Tractor Series, Configuration

CSM 105 - Front-Wheel Drive, Configuration

CSM 106 - Front Differential Lock, Configuration

CSM 107 - Rear Differential Lock, Configuration

CSM 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

CSM 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group ECU: ECU Control Software

ECU Control Software, Summary of References

ECU Control Software, Summary of Addresses

Group EIC: EIC Control Software

EIC Control Software, Summary of References

EIC Control Software, Summary of Addresses

EIC Control Software, Summary of Calibration and Input Addresses

EIC 004 - Enable Debug Data, Configuration

EIC 005 - Enable Debug Data, Configuration

EIC 040 - Exhaust Filter Service Cleaning Enable, Configuration

EIC 041 - Automatic Exhaust Filter Cleaning, Configuration

EIC 050 - Hand Throttle Potentiometer, Percent

EIC 051 - Accelerator Pedal Potentiometer, Percent

EIC 052 - Calculated Engine Speed of Hand Throttle Potentiometer

EIC 053 - Calculated Engine Speed of Accelerator Pedal Potentiometer

EIC 058 - Requested Engine Speed

EIC 059 - Engine Speed

EIC 060 - Engine Operating Hours

EIC 061 - Operating Hours, Tractor

EIC 070 - Power Boost (IPM), EOL Status

EIC 072 - Rear PTO, Output

EIC 073 - Front PTO, Output

EIC 075 - Power Boost (IPM Rear PTO), Status

EIC 076 - Power Boost (IPM Rear PTO), Percent

EIC 077 - Power Boost (IPM Rear PTO)

EIC 078 - Calculated Output of Rear PTO

EIC 079 - Calculated Output of Front PTO

EIC 080 - Power Boost (IPM Travel Speed), Status

EIC 081 - Power Boost (IPM Travel Speed), Percent

EIC 082 - Power Boost (IPM Travel Speed)

EIC 100 - Key for Immobilizer (Currently Active ID)

EIC 101 - Key for Immobilizer (Programmed ID for Key Number 1)

EIC 102 - Key for Immobilizer (Programmed ID for Key Number 2)

EIC 103 - Key for Immobilizer (Programmed ID for Key Number 3)

EIC 104 - Key for Immobilizer (Programmed ID for Key Number 4)

EIC 105 - Key for Immobilizer (Programmed ID for Key Number 5)

EIC 106 - Manual Identification of Key for Immobilizer, Configuration

EIC 110 - Number of Keys Programmed for the Immobilizer

EIC 111 - Key for Immobilizer (Currently Active Key Number)

EIC 112 - Security Code of Immobilizer, Status

EIC 113 - Detected CAN Bus Speed of Immobilizer Control Unit, Status

EIC 114 - Immobilizer Control Unit, Error Message

EIC 115 - Immobilizer Control Unit, Part Number

EIC 116 - Immobilizer Control Unit, Software Version Number

EIC 178 - FieldCruise™ 2, Configuration

EIC 179 - FieldCruise™ Speed 2, Configuration

EIC 180 - Activation of Cruise Control, Configuration

EIC 181 - Cruise Control, Configuration

EIC 182 - Activation of Power Boost (IPM), Configuration

EIC 183 - Exhaust Filter Cleaning, Configuration

EIC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

EIC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group ETC: ETC Control Software

ETC Control Software, Summary of References

ETC Control Software - Summary of Addresses

ETC Control Software, Summary of Calibration and Input Addresses

ETC 002 - Control Software Beep Mode

ETC 003 - Fan, Status

ETC 004 - Compressor Clutch, Status

ETC 005 - Fan Speed, Shown in Percent

ETC 006 - Desired Inside Temperature

ETC 007 - Air Distribution Mode, Status

ETC 008 - Temperature Inside Cab

ETC 009 - Outlet Temperature, Setpoint

ETC 010 - Temperature in Air Outlet Passage

ETC 011 - Heater Valve Position, Status

ETC 012 - Engine Coolant Temperature

ETC 013 - Ambient Temperature at Front

ETC 014 - Ambient Temperature at Rear

ETC 017 - Refrigerant Pressure on Pressure Side

ETC 018 - Defog Sensor, Frequency

ETC 019 - Pressurizer Fan Motor for Pressure Inside Cab, Status

ETC 020 - Evaporator Core Temperature

ETC 022 - Heater Valve, Calibration

ETC 023 - Actuator for Air Distribution, Calibration

ETC 026 - Sensor for Ambient Temperature (at Front), Configuration

ETC 027 - Sensor for Ambient Temperature (at Rear), Configuration

ETC 028 - Defog Sensor, Configuration

ETC 029 - Sensor for Refrigerant Pressure, Configuration

ETC 030 - Pressurizer Fan Motor for Pressure Inside Cab, Configuration

ETC 032 - Control of Compressor Clutch, Configuration

ETC 035 - Activation of Recirculating Fan, Configuration

ETC 040 - Temperature Inside Operator's Cab, Voltage

ETC 041 - Sensor for Outlet Air Temperature, Voltage

ETC 042 - Sensor for Ambient Air Temperature (Front), Voltage

ETC 043 - Sensor for Ambient Air Temperature (Rear), Voltage

ETC 044 - Refrigerant Pressure on Pressure Side, Voltage

ETC 045 - Evaporator Core Temperature, Voltage

ETC 046 - PWM Polarity of Fan, Configuration

ETC 047 - PWM Output Period, Configuration

ETC 049 - Outlet Air Temperature, Configuration

ETC 050 - Minimum Fan Voltage in Automatic Mode, Configuration

ETC 051 - Minimum Fan Speed in Manual Mode, Configuration

ETC 052 - Backlighting, Configuration

ETC 062 - Maximum Circulation Fan Speed in Automatic and Manual Mode, Configuration

ETC 063 - Minimum Circulation Fan Speed in Automatic Mode, Configuration

ETC 064 - Maximum Circulation Fan Speed in Automatic Mode, Configuration

ETC 065 - Closing Range of the Heater Valve, Configuration

ETC 066 - Opening Range of the Heater Valve, Configuration

ETC 067 - A/C Shutdown During Transfer/Transport, Configuration

ETC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

ETC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group FCC: FCC Control Software

FCC Control Software - Summary of References

FCC Control Software - Summary of Addresses

FCC Control Software - Summary of Calibration and Input Addresses

FCC 002 - Control Software Beep Mode

FCC 005 - Reverse Drive Lever, Status

FCC 006 - Reverse Drive Lever Neutral Switch Position, Status and Voltage

FCC 007 - Reverse Drive Lever Reverse Switch Position, Status and Voltage

FCC 008 - Turn Signal Switch, Status

FCC 009 - Light Switch, Status

FCC 010 - High-Beam Switch, Windshield Wiper Shut-off Switch, Wake-up Signal and ELX Supply Voltage, Status

FCC 011 - Windshield Wiper Switch, Status

FCC 012 - Rear Window Wiper Switch, Status

FCC 013 - Supply Voltage (ELX)

FCC 015 - Reverse Drive Lever, Status

FCC 050 - Transmission Type, Configuration

FCC 051 - Reverse Drive Lever, Configuration

FCC 052 - Turn-Signal Lever, Configuration

FCC 053 - Light Switch, Configuration

FCC 054 - High-Beam Switch, Configuration

FCC 055 - Windshield Wiper, Configuration

FCC 056 - Rear Window Wiper, Configuration

FCC 057 - Horn Switch, Configuration

FCC 058 - Hazard Warning Light Switch, Configuration

FCC 059 - Windshield Wiper Shut-off Switch, Configuration

FCC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

FCC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group GPM: GPM Control Software

GPM Control Software, Summary of References

GPM Control Software, Summary of Addresses

GPM 011 - Gear 1 Solenoid, Temperature

GPM 012 - Gear 2 Solenoid, Temperature

GPM 013 - Gear 3 Solenoid, Temperature

GPM 014 - Gear 4 Solenoid, Temperature

GPM 015 - Gear 5 Solenoid, Temperature

GPM 016 - Gear 6 Solenoid, Temperature

GPM 017 - Gear 7 Solenoid, Temperature

GPM 018 - Gear 8 Solenoid, Temperature

GPM 021 - Gear 1 Solenoid, Inductance

GPM 022 - Gear 2 Solenoid, Inductance

GPM 023 - Gear 3 Solenoid, Inductance

GPM 024 - Gear 4 Solenoid, Inductance

GPM 025 - Gear 5 Solenoid, Inductance

GPM 026 - Gear 6 Solenoid, Inductance

GPM 027 - Gear 7 Solenoid, Inductance

GPM 028 - Gear 8 Solenoid, Inductance

GPM 031 - Number of Failed Attempts to Engage Gear 1

GPM 032 - Number of Failed Attempts to Engage Gear 2

GPM 033 - Number of Failed Attempts to Engage Gear 3

GPM 034 - Number of Failed Attempts to Engage Gear 4

GPM 035 - Number of Failed Attempts to Engage Gear 5

GPM 036 - Number of Failed Attempts to Engage Gear 6

GPM 037 - Number of Failed Attempts to Engage Gear 7

GPM 038 - Number of Failed Attempts to Engage Gear 8

GPM 041 - Gear 1 Solenoid, Resistance

GPM 042 - Gear 2 Solenoid, Resistance

GPM 043 - Gear 3 Solenoid, Resistance

GPM 044 - Gear 4 Solenoid, Resistance

GPM 045 - Gear 5 Solenoid, Resistance

GPM 046 - Gear 6 Solenoid, Resistance

GPM 047 - Gear 7 Solenoid, Resistance

GPM 048 - Gear 8 Solenoid, Resistance

Group HCC: HCC Control Software

HCC Control Software - Summary of References

HCC Control Software - Summary of Addresses

HCC Control Software - Summary of Calibration and Input Addresses

HCC 002 - Control Software Beep Mode

HCC 003 - Hitch and E-SCV Present/Not Present, Configuration

HCC 004 - Hitch Position, Voltage

HCC 005 - Right Draft Sensor or Load Control Shaft, Voltage

HCC 006 - Left Draft Sensor, Voltage

HCC 007 - Remote Control Switch for Hitch, Status

HCC 013 - 5-V Supply Voltage

HCC 014 - Supply Voltage (ELX)

HCC 015 - Supply Voltage (BAT)

HCC 016 - Internal Supply Voltage to Control Software

HCC 019 - Transmission Oil Temperature

HCC 020 - Hitch, Calibration

HCC 021 - Hitch, configuration

HCC 022 - Rear Hitch Operator Command, Status

HCC 023 - Activation of Stepper Motor for Hitch, Display in %

HCC 024 - Gain Factor for the Lift Rate at Hitch (Rear), Configuration

HCC 025 - Left Draft Sensor (Voltage with No Load on Draft Link), Configuration

HCC 026 - Right Draft Sensor or Load Control Shaft (Voltage with No Load on Draft Link), Configuration

HCC 027 - Rear Hitch Draft Sensor Gain, Configuration

HCC 028 - Hitch Position (Upper Stop), Voltage

HCC 029 - Hitch Position (Lower Stop), Voltage

HCC 030 - Stepper Motor of Hitch Control, Status

HCC 031 - Stepper Motor of Hitch Control, Status, Flow Signal

HCC 033 - Maximum Flow Rate when Raising the Hitch, Status

HCC 034 - Upper Deadband (Raise) of the Hitch Valve, Status

HCC 035 - Lower Deadband (Lower) of the Hitch Valve, Status

HCC 060 - Draft Link Stabilizer Valves, Configuration

HCC 061 - Through-Flow Valve of Draft Link Stabilizer, Amperage

HCC 062 - Lock Valve of Draft Link Stabilizer, Amperage

HCC 063 - Ground Speed Sensor (Radar) Present/Not Present, Configuration

HCC 080 - Lift Cylinder Speed, Status

HCC 087 - Rear Hitch Slippage, Display in %

HCC 088 - Threshold Value for Rear Hitch Slip, Display in %

HCC 089 - Draft Link Stabilizer Strut, Status

HCC 090 - Draft Link Stabilizer Strut Present/Not Present, Configuration

HCC 091 - Hitch Dampening, Configuration

HCC 093 - Gain for Lowering Speed during Quick Lowering of the Hitch, Configuration

HCC 094 - Distance (in Meter) for the Quick Lowering with iTEC™, Configuration

HCC 149 - Installed Control Software, Status

HCC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

HCC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group HV1: HV1 Control Software

HV1 Control Software, Summary of References

HV1 Control Software, Summary of Addresses

HV1 Control Software, Summary of Calibration and Input Addresses

HV1 003 - Specified Flow Speed and Direction of the Hitch Valve, Status

HV1 004 - Set Speed of the Hitch Valve, Status

HV1 011 - 12-Volt Supply Voltage of the Stepper Motor

HV1 012 - Temperature of the Stepper Motor of the Hitch Valve

HV1 050 - Communication with other Control Units, Configuration

HV1 051 - Assigned Address of the Stepper Motor of the Hitch Control, Configuration

HV1 061 - CAN Bus Timeout, Status

HV1 100 - Deadband Range of the Hitch Valve, Status

HV1 120 - Operating Mode of the Stepper Motor, Status

Group ICA: ICA Control Software

ICA Control Software, Summary of References

ICA Control Software, Summary of Addresses

ICA 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

ICA 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group JDL: JDL Control Software

JDL Control Software, Summary of References

Group MFC: MFC control software

MFC Control Software - Summary of References

MFC Control Software - Summary of Addresses

MFC Control Software - Summary of Calibration and Input Addresses

MFC 030 - Axes of the Multi-Function Lever, Status

MFC 031 - 3. Function and Activation Switch of Multi-Function Lever, Status

MFC 032 - Buttons of the Multi-Function Lever, Status

MFC 050 - Backlighting via CAN Bus, Status

MFC 054 - Transport Lock of Multi-Function Lever, Status

MFC 070 - Backlighting via LIN Bus, Status

MFC 076 - Lighting of the Lock Switch, Status

MFC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

MFC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group OIC: OIC Control Software

OIC Control Software - Summary of References

OIC Control Software - Summary of Addresses

OIC Control Software - Summary of Calibration and Input Addresses

OIC 002 - Control Software Beep Mode

OIC 004 - Brake Pedal Switch (PowrQuad™ Transmission), Status

OIC 005 - Differential Lock Switch, Status

OIC 006 - Right Remote Control Switch for Rear PTO, Status

OIC 007 - Left Remote Control Switch for Rear PTO, Status

OIC 008 - Control Software Activation, Status

OIC 009 - Remote Control Switch for Hitch (Raise), Status

OIC 010 - Wake-Up Voltages, Status

OIC 011 - Remote Control Switch for Hitch (Lower), Status

OIC 013 - Remote Control Switch for E-SCVs (Extend), Status

OIC 014 - Remote Control Switch for E-SCVs (Retract), Status

OIC 018 - Rear Window Wiper Shut-Off Switch and Door Switch, Status

OIC 021 - Come-Home Connector, Operator Presence Switch and Key Switch, Status

OIC 030 - ELX Driver Current

OIC 031 - Driver for OIC Control Software, Current

OIC 032 - CAN Bus Signal Driver Current

OIC 033 - Driver for OIC Software for Automatic Battery Switch-Off, Status

OIC 050 - Clutch Pedal Potentiometer (Channel 1), Voltage

OIC 051 - Clutch Pedal Potentiometer (Channel 2), Voltage

OIC 053 - Accelerator Pedal Potentiometer (Channel 1), Voltage

OIC 054 - Accelerator Pedal Potentiometer (Channel 2), Voltage

OIC 057 - Supply Voltage (ELX)

OIC 058 - Supply Voltage (BAT)

OIC 059 - 5-V Supply Voltage 1

OIC 060 - 5-V Supply Voltage 2

OIC 061 - 5-V Supply Voltage 3

OIC 063 - System Sensor Current 1

OIC 064 - System Sensor Current 2

OIC 065 - System Sensor Current 3

OIC 068 - Brake Calibration

OIC 069 - Left Brake Calibration Results, Status

OIC 070 - Right Brake Calibration Results, Status

OIC 071 - Brake Calibration Result, Status

OIC 072 - Clutch Pedal Sensor, Minimum Voltage

OIC 073 - Clutch Pedal Sensor, Maximum Voltage

OIC 074 - Accelerator Pedal Sensor, Minimum Voltage

OIC 075 - Accelerator Pedal Sensor, Maximum Voltage

OIC 080 - Reference Voltage, Configuration

OIC 081 - Minimum Degree of Utilization of Clutch Pedal, Current in Percentage

OIC 082 - Maximum Degree of Utilization of Clutch Pedal, Current in Percentage

OIC 083 - Maximum Degree of Utilization of Accelerator Pedal, Current in Percent

OIC 084 - Minimum Degree of Utilization of Accelerator Pedal, Current in Percent

OIC 085 - Accelerator Pedal, Potentiometer 2, Voltage

OIC 086 - Accelerator Pedal, Potentiometer 1, Voltage

OIC 090 - Debug Mode for Diagnostic Trouble Codes, Configuration

OIC 101 - Control Software Present/Not Present (OIC, AIC, TIA, ASU, CLC, SMV, TEC, TII), Configuration

OIC 102 - Control Software Present / Not Present (TIP, TIQ, EIC, FCC, MFC), Status

OIC 104 - Rear Window Wiper Shut-Off Switch, Status

OIC 106 - Transmission Type, Status

OIC 107 - Remote Control Switch for Hitch, Status

OIC 108 - Switches for Remote Control of E-SCVs, Status

OIC 109 - Remote Control Switch for Rear PTO, Status

OIC 110 - Operator Presence Switch (Status)

OIC 112 - Key Switch, Status

OIC 113 - Connector for Come-Home Function, Status

OIC 115 - Accelerator Pedal, Status

OIC 116 - Foot Brake, Status

OIC 117 - Transfer of Transmission Information, Status

OIC 118 - Clutch Pedal, Status

OIC 119 - Differential Lock, Status

OIC 120 - Reverse Brake Signal, Status

OIC 125 - Hazard Switch, Configuration

OIC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

OIC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group PAP: PAP Control Software

PAP Control Software - Summary of References

PAP Control Software - Summary of Addresses

PAP 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

PAP 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group PDU: PDU Control Software

PDU Control Software - Summary of References

PDU Control Software - Summary of Addresses

PDU Control Software - Summary of Configuration and Calibration Addresses

PDU 002 - Control Software Beep Mode

PDU 004 - Supply Voltage (ELX)

PDU 020 - Country Settings, Configuration

PDU 021 - Adjustment of Units on Display, Configuration

PDU 022 - Adjustment of Brightness of Indicator Lights, Configuration

PDU 023 - Adjustment of Brightness of Instrument Lighting, Configuration

PDU 024 - Speed Selection, Configuration

PDU 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

PDU 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group PL1: PL1 Control Software

PL1 Control Software, Summary of References

PL1 Control Software, Summary of Addresses

PL1 010 - Keep-Alive Voltage for Park Lock, Status

Group PL2: PL2 Control Software

PL2 Control Software, Summary of References

PL2 Control Software, Summary of Addresses

PL2 050 - Ratio of Front-Wheel Drive

PL2 051 - Ratio of Differential

Group PL3: PL3 Control Software

PL3 Control Software, Summary of References

PL3 Control Software, Summary of Addresses

Group PL4: PL4 Control Software

PL4 Control Software, Summary of References

PL4 Control Software, Summary of Addresses

PL4 050 - Ratio of Front-Wheel Drive

PL4 051 - Ratio of Differential

Group PLC: PLC Control Software

PLC Control Software - Summary of References

PLC Control Software - Summary of Addresses

PLC Control Software, Summary of Calibration and Input Addresses

PLC 002 - Control Software Beep Mode with Speed Sensors

PLC 003 - Control Software Beep Mode without Speed Sensors

PLC 004 - Wheel Speed Sensor, Status

PLC 010 - Reverse Drive Lever, Status

PLC 012 - Park Lock Pressure Sensor, Voltage

PLC 016 - Park Lock Solenoid Valve 2, Status

PLC 021 - Wheel Speed Sensor

PLC 023 - Transmission Output Speed Sensor

PLC 032 - Supply Voltage (BAT)

PLC 034 - 5-V Supply Voltage

PLC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

PLC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group PTA: PTA Control Software

PTA Control Software - Summary of References

PTA Control Software - Summary of Addresses

PTA Control Software - Summary of Calibration and Input Addresses

PTA 002 - Control Software Beep Mode with Speed Sensors

PTA 003 - Control Software Beep Mode without Speed Sensors

PTA 005 - Pressure Switches for Transmission Oil Filter, Transmission Oil, and Filter By-Pass Valve, Status

PTA 007 - Transmission Enable Relay, Status:

PTA 010 - Hydrostatic Speed and Transmission Input Speed Sensors, Status

PTA 011 - Wheel Speed and Transmission Output Speed Sensors, Status

PTA 017 - Transmission Oil Pressure Sensor, Voltage

PTA 018 - Lube Oil Pressure Sensor, Voltage

PTA 019 - Transmission Oil Temperature Sensor, Voltage

PTA 020 - Transmission, Calibration

PTA 021 - Transmission Oil Temperature Sensor

PTA 022 - Lube Oil Pressure Sensor

PTA 023 - Transmission Oil Pressure Sensor

PTA 032 - Solenoid Valves for Clutches 1, 2 and 3, Status

PTA 033 - Solenoid Valves for Clutch 4 and Disk Brake, Status

PTA 036 - Proportional Solenoid Valve for Forward Clutch, Current

PTA 037 - Proportional Solenoid Valve for Reverse Clutch, Current

PTA 038 - Park Lock Solenoid Valve 1, Status

PTA 042 - Proportional Solenoid Valve 1 for Hydrostatic Unit, Current

PTA 043 - Proportional Solenoid Valve 2 for Hydrostatic Unit, Current

PTA 044 - Tractor Model Identification Numbers, Configuration

PTA 045 - Transmission Input Speed Sensor

PTA 046 - Hydrostatic Speed Sensor

PTA 047 - Transmission Output Speed Sensor

PTA 048 - Wheel Speed Sensor

PTA 049 - Test Mode, Configuration

Group PTD: PTD Control Software

PTD Control Software, Summary of References

PTD Control Software, Summary of Addresses

PTD Control Software, Summary of Calibration and Input Addresses

PTD Control Software - Fine-Tuning

PTD 002 - Control Software Beep Mode with Speed Sensors

PTD 003 - Control Software Beep Mode without Speed Sensors

PTD 004 - Transmission Output Speed Sensor, Status

PTD 005 - Wheel Speed Sensor (Channel 1), Status

PTD 006 - Wheel Speed Sensor (Channel 2), Status

PTD 009 - Transmission Enable, Status

PTD 010 - Park Lock, Status

PTD 020 - Reverse Drive Lever, Status

PTD 021 - Current Direction of Travel, Status

PTD 022 - Transmission Warm-up Routine and Come-Home Feature, Status

PTD 023 - Clutch and Brake Pedals, Status

PTD 024 - Transmission Output Speed Sensor

PTD 027 - Wheel Speed Sensor (Channel 1), Speed

PTD 028 - Wheel Speed Sensor (Channel 2), Speed

PTD 029 - Wheel Speed Sensor (Channel 1)

PTD 030 - Wheel Speed Sensor (Channel 2)

PTD 031 - Test Mode of Proportional Solenoid Valve for Forward Clutch, Configuration

PTD 032 - Test Mode of Proportional Solenoid Valve for Reverse Brake, Configuration

PTD 033 - Test Mode of Proportional Solenoid Valve for Clutch for Side Shaft 2, Configuration

PTD 034 - Test Mode of Proportional Solenoid Valve for Clutch for Side Shaft 1, Configuration

PTD 035 - Forward Clutch Commanded Pressure

PTD 036 - Forward Clutch Oil Pressure Sensor

PTD 037 - Commanded Current of Proportional Solenoid Valve for Forward Clutch

PTD 038 - Proportional Solenoid Valve for Forward Clutch, Current

PTD 039 - Reverse Brake Commanded Pressure

PTD 040 - Reverse Brake Oil Pressure Sensor

PTD 041 - Commanded Current of Proportional Solenoid Valve for Reverse Brake

PTD 042 - Proportional Solenoid Valve for Reverse Brake, Current

PTD 043 - Commanded Pressure of Clutch for Side Shaft 2

PTD 044 - Commanded Current of Proportional Solenoid Valve for Clutch for Side Shaft 2

PTD 045 - Proportional Solenoid Valve for Clutch for Side Shaft 2, Current

PTD 046 - Commanded Pressure of Clutch for Side Shaft 1

PTD 047 - Commanded Current of Proportional Solenoid Valve for Clutch for Side Shaft 1

PTD 048 - Proportional Solenoid Valve for Clutch for Side Shaft 1, Current

PTD 049 - Diagnostic Oil Pressure Sensor

PTD 050 - Transmission Oil Pressure Sensor

PTD 060 - Transmission Oil Temperature

PTD 061 - Value for Other Hydraulic Oil, Configuration

PTD 062 - Other Hydraulic Oil, Configuration

PTD 064 - Transmission Calibration

PTD 065 - Forward Clutch Fill Pressure, Configuration

PTD 066 - Reverse Brake Fill Pressure, Configuration

PTD 067 - Fill Pressure for Clutch for Side Shaft 2, Configuration

PTD 068 - Fill Pressure for Clutch for Side Shaft 1, Configuration

PTD 069 - Forward Clutch Fill Time, Configuration

PTD 070 - Reverse Brake Fill Time, Configuration

PTD 071 - Fill Time for Clutch for Side Shaft 2, Configuration

PTD 072 - Fill Time for Clutch for Side Shaft 1, Configuration

PTD 080 - Keep Customer Settings when Reprogramming, Configuration

PTD 090 - Ratio of Front-Wheel Drive, Status

PTD 091 - Maximum Speed, Status

PTD 092 - Ratio of Differential, Status

PTD 100 - Enable Debug Data, Configuration

Group PTF: PTF Control Software

PTF Control Software - Summary of References

PTF Control Software - Summary of Addresses

PTF 002 - Control Software Beep Mode

PTF 003 - Supply Voltage (BAT)

PTF 005 - Front PTO Switch, Status

PTF 006 - Front PTO Solenoid Valve Driver, Status

PTF 007 - Front PTO Solenoid Valve Supply Line, Current

PTF 008 - Wake-Up Signal, Status

PTF 009 - Front PTO Solenoid Valve Return Line, Current

PTF 010 - Front PTO Speed Sensor, Voltage

PTF 012 - Operator Presence, Status

PTF 014 - Front PTO Speed

PTF 019 - Control Software Operational State, Status

PTF 021 - Fill Pulse Time for Front PTO, Configuration

PTF 022 - Level of Current Correction for Front PTO

PTF 025 - Operator Presence Notification System, Status

PTF 027 - Operator Presence Signal, EOL Configuration

PTF 028 - EU Regulations, EOL Configuration

PTF 029 - Tractor Series, EOL Configuration

PTF 030 - Front PTO Type, EOL Configuration

PTF 031 - Allocation of Front PTO Clutch, EOL Configuration

PTF 033 - Front PTO Speed, EOL Configuration

PTF 043 - Remote Control Switch for Front PTO, EOL Configuration

PTF 045 - Front PTO Switch, EOL Configuration

PTF 048 - Overload Protection at Start-Up

PTF 049 - C3 Parameter

PTF 050 - C4 Parameter

PTF 051 - Maximum Load Parameter

PTF 052 - Front PTO Speed Filter

PTF 055 - Front PTO Speed, Configuration

PTF 060 - Configuration of Front PTO Switch, Configuration

PTF 061 - Configuration of Front PTO Switch, Status

PTF 062 - Configuration of Front PTO Switch LED, Status

PTF 080 - Tractor-Implement Automation Enable, Status

PTF 081 - Tractor-Implement Automation Error Messages (Front PTO)

Group PTQ: PTQ Control Software

PTQ Control Software - Summary of References

PTQ Control Software - Summary of Addresses

PTQ Control Software - Summary of Calibration and Input Addresses

PTQ Control Software - Fine-Tuning

PTQ 002 - Control Software Beep Mode with Frequencies

PTQ 003 - Control Software Beep Mode without Frequencies

PTQ 004 - Crankshaft Speed Sensor, Status

PTQ 006 - Transmission Enable Signal, Status

PTQ 007 - Reverse Drive Lever, Status

PTQ 009 - Come-Home Connector, Operator Presence Switch and Operating Mode, Status

PTQ 010 - Reverse Drive Lever Not-Neutral Switch, Voltage

PTQ 011 - Clutch Pedal Potentiometer, Status

PTQ 012 - Clutch Pedal Potentiometer (Channel A), Voltage

PTQ 014 - Transmission Speed

PTQ 015 - Enable Pressure Sensor, Voltage

PTQ 016 - Automatic Engine Speed Increase when Shifting Forward/Reverse, Configuration

PTQ 017 - Automatic Engine Speed Increase at Driving Start, Configuration

PTQ 018 - Changed Clutch Modulation at Low Engine Speed, Configuration

PTQ 021 - Commanded Current for Proportional Solenoid Valve for Transmission Enable, Current

PTQ 022 - Enable Pressure Sensor, Pressure

PTQ 031 - System Pressure 2, Status

PTQ 032 - System Pressure, Status

PTQ 035 - Value for Other Hydraulic Oil, Configuration

PTQ 036 - Transmission Oil Temperature Sensor, Temperature

PTQ 037 - Hydraulic Oil Type, Configuration

PTQ 038 - Transmission Calibration

PTQ 039 - Transmission Calibration Values, Status

PTQ 040 - Forward Clutch Fill Pressure, Configuration

PTQ 041 - Reverse Brake Fill Pressure, Configuration

PTQ 042 - Forward Clutch Fill Time, Configuration

PTQ 043 - Reverse Brake Fill Time, Configuration

PTQ 048 - Operator Presence Switch, Configuration

PTQ 049 - Number of Transmission Signals, Status

PTQ 060 - Test of Gear Selector Solenoid Valves

PTQ 061 - Gear Selector Solenoid Valves, Current

PTQ 062 - Test of Solenoid Valves for Forward Clutch/Reverse Brake

PTQ 063 - Solenoid Valves for Forward Clutch/Reverse Brake, Current

PTQ 064 - Check of Proportional Solenoid Valve for Transmission Enable

PTQ 065 - Proportional Solenoid Valve for Transmission Enable, Current

PTQ 066 - Enable Pressure Sensor, Pressure

PTQ 067 - Enable Pressure Sensor, Voltage

PTQ 198 - Keep Customer Settings when Reprogramming, Configuration

PTQ 199 - Display of Additional CAN Bus Messages, Configuration

PTQ 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

PTQ 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group RLC: RLC Control Software

RLC Control Software - Summary of References

RLC Control Software - Summary of Addresses

RLC Control Software - Summary of Configuration and Calibration Addresses

RLC 002 - Control Software Beep Mode

RLC 006 - Vehicle CAN BUS (500 kBd), Signal Voltage (CAN -)

RLC 007 - Vehicle CAN BUS (500 kBd), Signal Voltage (CAN +)

RLC 008 - Implement CAN BUS, Signal Voltage (CAN -)

RLC 009 - Implement CAN BUS, Signal Voltage (CAN +)

RLC 012 - Supply Voltage (ELX)

RLC 013 - Output for Turn Light Synchronization, Current and Status

RLC 014 - Supply Voltage (BAT)

RLC 015 - Temperature of Roof Control Unit

RLC 016 - Output for Left Rear Turn-Signal Light, Current and Status

RLC 017 - Output for Right Rear Turn-Signal Light, Current and Status

RLC 018 - Output for Dome Light, Status

RLC 019 - Output for License Plate Light, Current and Status

RLC 020 - Output for Left Worklight on Cab Frame, Current and Status

RLC 021 - Output for Right Worklight on Cab Frame, Current and Status

RLC 022 - Output for Left Side-Facing Worklight on Rear of Roof, Current and Status

RLC 023 - Output for Right Side-Facing Worklight on Rear of Roof, Current and Status

RLC 024 - Output for Left Inner Worklight on Rear of Roof or Left Xenon (HID) Worklight on Rear of Roof, Current and Status

RLC 025 - Output for Right Inner Worklight on Rear of Roof or Right Xenon (HID) Worklight on Rear of Roof, Current and Status

RLC 026 - Output for Left Middle Worklight on Front of Roof or Left Xenon (HID) Worklight on Front of Roof, Current and Status

RLC 027 - Output for Right Middle Worklight on Front of Roof or Right Xenon (HID) Worklight on Front of Roof, Current and Status

RLC 028 - Output for Left Outer Worklight on Front of Roof, Left Turn-Signal Light or Extra-Wide Vehicle Warning Light on Front of Roof (SAE), Current and Status

RLC 029 - Output for Right Outer Worklight on Front of Roof, Right Turn-Signal Light or Extra-Wide Vehicle Warning Light on Front of Roof (SAE), Current and Status

RLC 030 - Output for Left Outer Worklight on Rear of Roof or Left Turn-Signal Light on Rear of Roof (SAE), Current and Status

RLC 031 - Output for Right Outer Worklight on Rear of Roof or Right Turn-Signal Light on Rear of Roof (SAE), Current and Status

RLC 032 - Output for Left Inner Worklight on Front of Roof, Current and Status

RLC 033 - Output for Right Inner Worklight on Front of Roof, Current and Status

RLC 034 - Output for Left Clearance Light (ECE), Current and Status

RLC 035 - Output for Right Clearance Light (ECE), Current and Status

RLC 036 - Output for Left Front Turn-Signal Light (ECE), Current and Status

RLC 037 - Output for Right Front Turn-Signal Light (ECE), Current and Status

RLC 038 - Output for Windshield Wiper Motor (Fast), Current and Status

RLC 039 - Output for Windshield Wiper Motor (Slow), Current and Status

RLC 040 - Output for Rear Window Wiper Motor, Current and Status

RLC 041 - Output for Right Low-Beam Headlight on Cab Frame, Current and Status

RLC 042 - Output for Left Low-Beam Headlight on Cab Frame, Current and Status

RLC 043 - Output for Right High-Beam Headlight on Cab Frame, Right Worklight on Cab Frame or Right Xenon (HID) Worklight on Cab Frame, Current and Status

RLC 044 - Output for Left High-Beam Headlight on Cab Frame, Left Worklight on Cab Frame or Left Xenon (HID) Worklight on Cab Frame, Current and Status

RLC 045 - Control Software Input Current, Current

RLC 046 - Output for Console Light, Current and Status

RLC 047 - Output for Left Beacon Light, Current and Status

RLC 048 - Output for Right Beacon Light, Current and Status

RLC 049 - Output for Heated Rear Window Indicator Light, Current and Status

RLC 050 - Output for Heated Rear Window, Current and Status

RLC 051 - Output for Backlighting of Radio and Backlighting of Switch for Electrical Outside Mirrors, Status

RLC 052 - Park Position of Windshield and Rear Window Wipers and Module Wake-Up Signal, Status

RLC 054 - Various Switch Inputs (Cab), Status

RLC 055 - Heated Rear Window, Configuration

RLC 056 - Left and Right Beacon Lights, Configuration

RLC 057 - Turn-Signal Lights, Configuration

RLC 058 - Rear Window Wiper Moves to End Position After Ignition is Turned Off, Configuration

RLC 059 - Adjustment of Daytime Brightness, Configuration

RLC 061 - Backlighting, Configuration

RLC 062 - Windshield Wiper and Tractor Series, Configuration

RLC 063 - Rear Window Wiper and Tractor Series, Configuration

RLC 064 - Front Corner Worklights, Configuration

RLC 065 - Worklights on Rear of Roof, Configuration

RLC 066 - Worklights on Front of Roof, Configuration

RLC 067 - Headlights, Configuration

RLC 068 - Worklights on Cab Frame, Configuration

RLC 069 - Duration of Light Page Display Until Previous Page is Displayed Again on CommandCenter (SDU), Configuration

RLC 070 - Voltage Threshold for Forced Shut-Off of Lighting, Configuration

RLC 071 - Forced Shut-Off of Lighting After Voltage Falls Below Threshold, Configuration

RLC 072 - On-Time of Egress Lighting After Ignition Off, Configuration

RLC 073 - On-Time of Egress Lighting With Ignition On and Engine Off, Configuration

RLC 074 - Low-Beam Headlights On/Off with Switch in Parking Light Position, Configuration

RLC 078 - Remote Control of Rear PTO, Configuration

RLC 079 - Tractor Series, Configuration

RLC 080 - Overvoltage Protection of Configured Worklights, Configuration

RLC 081 - Right Dome Light with Switch/Console Light, Configuration

RLC 082 - Trailer Lights, Configuration

RLC 085 - Symbol for Worklights on Rear of Fenders, Configuration

RLC 086 - Forced Shut-Off of Worklights, Configuration

RLC 087 - Operator Warning (Light Switch On, Ignition Off and Door Open), Configuration

RLC 088 - Self-Cancellation of Turn-Signal Lights, Configuration

RLC 089 - License Plate Light, Configuration

RLC 090 - Clearance Lights, Configuration

RLC 091 - Tractor Tires, Configuration

RLC 092 - Dome Light, Configuration

RLC 099 - Stored Maximum Temperature of Control Unit

RLC 102 - Information on Temperature of Roof Control Unit (below - 40 °C), Display in %

RLC 103 - Information on Temperature of Roof Control Unit (from - 40 °C to 24 °C), Display in %

RLC 104 - Information on Temperature of Roof Control Unit (from 25 °C to 50 °C), Display in %

RLC 105 - Information on Temperature of Roof Control Unit (from 51 °C to 69 °C), Display in %

RLC 106 - Information on Temperature of Roof Control Unit (from 70 °C to 84 °C), Display in %

RLC 107 - Information on Temperature of Roof Control Unit (from 85 °C to 105 °C), Display in %

RLC 108 - Information on Temperature of Roof Control Unit (above 105 °C), Display in %

RLC 120 - Stored Maximum Output Current of Control Unit

RLC 121 - Voltage at Which the Stored Maximum Output Current of Control Unit was Determined

RLC 123 - Light Switch, Configuration

RLC 124 - Access Step Lighting, Configuration

RLC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

RLC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group RPM: RPM Control Software

RPM Control Software, Summary of References

RPM Control Software, Summary of Addresses

RPM 011 - Range A Solenoid, Temperature

RPM 012 - Range B Solenoid, Temperature

RPM 013 - Range C Solenoid, Temperature

RPM 021 - Range A Solenoid, Inductance

RPM 022 - Range B Solenoid, Inductance

RPM 023 - Range C Solenoid, Inductance

RPM 031 - Number of Failed Attempts to Engage Range A

RPM 032 - Number of Failed Attempts to Engage Range B

RPM 033 - Number of Failed Attempts to Engage Range C

RPM 041 - Range A Solenoid, Resistance

RPM 042 - Range B Solenoid, Resistance

RPM 043 - Range C Solenoid, Resistance

Group RPT: RPT Control Software

RPT Control Software - Summary of References

RPT Control Software - Summary of Addresses

RPT Control Software - Summary of Calibration and Input Addresses

RPT 002 - Control Software Beep Mode

RPT 003 - Supply Voltage (BAT)

RPT 005 - Rear PTO Switch, Status

RPT 006 - Activation of Rear PTO Solenoid Valve, Status

RPT 007 - Rear PTO Solenoid Valve (Supply), Current

RPT 008 - Wake-Up Signal, Status

RPT 009 - Rear PTO Solenoid Valve (Ground), Current

RPT 010 - Rear PTO Speed Sensor, Voltage

RPT 011 - PTO Shaft Spline Identifier Switch, Voltage

RPT 012 - Operator Presence Switch, Status

RPT 013 - Right and Left Remote Control Switches for Rear PTO, Status

RPT 014—Rear PTO Speed

RPT 019 - Control Software Operational State, Status

RPT 020 - Rear PTO, Calibration

RPT 021 - Fill Pulse Time for Rear PTO, Configuration

RPT 022 - Level of Current Correction for Rear PTO

RPT 023 - Rear PTO Calibration, Status

RPT 025 - Operator Presence Notification System, Status

RPT 026 - Transmission Options, EOL Configuration

RPT 027 - Operator Presence Switch, EOL Configuration

RPT 028 - EU Regulations, EOL Configuration

RPT 029 - Tractor Series, EOL Configuration

RPT 030 - Allocation of Rear PTOs by Model, EOL Configuration

RPT 031 - Allocation of Rear PTO Clutch by Tractor Model, EOL Configuration

RPT 032 - Number of Available Rear PTO Speeds, EOL Configuration

RPT 034 - With 2 Rear PTO Speeds (540 /1000), EOL Configuration

RPT 035 - With 3 Rear PTO Speeds (540 /540E /1000 or 540E /1000 /1000E), EOL Configuration

RPT 040 - Power-Assisted Shifting of Rear PTO (PAPTOS), EOL Configuration

RPT 041 - PTO Shaft Spline Identifier Switch, EOL Configuration

RPT 042 - Power Boost at Rear PTO

RPT 043 - Remote control switches for rear PTO, EOL configuration

RPT 044 - Rear PTO Cruise Control, EOL Configuration

RPT 045 - Rear PTO Switch, EOL Configuration

RPT 047 - Auto-Neutral Function for Rear PTO, EOL Configuration

RPT 048 - Overload Protection at Start-Up

RPT 049 - Parameter C3

RPT 050 - Parameter C4

RPT 051 - Maximum Load Parameter

RPT 060 - Configuration of Rear PTO Switch, Configuration

RPT 061 - Configuration of Rear PTO Switch, Status

RPT 062 - Configuration of Rear PTO Switch LED, Status

RPT 070 - Intelligent Rear PTO, Configuration

RPT 080 - Enabling of Tractor-Implement Automation, Status

RPT 081 - Fault Messages of Tractor-Implement Automation (Rear PTO)

RPT 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

RPT 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group SB1: SB1 control software

SB1 Control Software, Summary of References

SB1 Control Software, Summary of Addresses

SB1 Control Software, Summary of Calibration and Input Addresses

SB1 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SB1 004 - Set Speed of the Selective Control Valve, Status

SB1 011 - 12-Volt Supply Voltage of the Stepper Motor

SB1 012 - Temperature of the Stepper Motor of the Selective Control Valve

SB1 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SB1 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SB1 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SB1 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SB1 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SB1 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SB1 050 - Communication with other Control Units, Configuration

SB1 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SB1 100 - Deadband Range of the Selective Control Valve, Status

SB1 120 - Operating Mode of the Stepper Motor, Status

Group SB2: SB2 Control Software

SB2 Control Software, Summary of References

SB2 Control Software, Summary of Addresses

SB2 Control Software, Summary of Calibration and Input Addresses

SB2 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SB2 004 - Set Speed of the Selective Control Valve, Status

SB2 011 - 12-Volt Supply Voltage of the Stepper Motor

SB2 012 - Temperature of the Stepper Motor of the Selective Control Valve

SB2 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SB2 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SB2 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SB2 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SB2 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SB2 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SB2 050 - Communication with other Control Units, Configuration

SB2 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SB2 100 - Deadband Range of the Selective Control Valve, Status

SB2 120 - Operating Mode of the Stepper Motor, Status

Group SB3: SB3 control software

SB3 Control Software, Summary of References

SB3 Control Software, Summary of Addresses

SB3 Control Software, Summary of Calibration and Input Addresses

SB3 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SB3 004 - Set Speed of the Selective Control Valve, Status

SB3 011 - 12-Volt Supply Voltage of the Stepper Motor

SB3 012 - Temperature of the Stepper Motor of the Selective Control Valve

SB3 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SB3 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SB3 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SB3 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SB3 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SB3 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SB3 050 - Communication with other Control Units, Configuration

SB3 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SB3 100 - Deadband Range of the Selective Control Valve, Status

SB3 120 - Operating Mode of the Stepper Motor, Status

Group SB4: SB4 Control Software

SB4 Control Software, Summary of References

SB4 Control Software, Summary of Addresses

SB4 Control Software, Summary of Calibration and Input Addresses

SB4 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SB4 004 - Set Speed of the Selective Control Valve, Status

SB4 011 - 12-Volt Supply Voltage of the Stepper Motor

SB4 012 - Temperature of the Stepper Motor of the Selective Control Valve

SB4 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SB4 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SB4 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SB4 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SB4 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SB4 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SB4 050 - Communication with other Control Units, Configuration

SB4 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SB4 100 - Deadband Range of the Selective Control Valve, Status

SB4 120 - Operating Mode of the Stepper Motor, Status

Group SB5: SB5 Control Software

SB5 Control Software, Summary of References

SB5 Control Software, Summary of Addresses

SB5 Control Software, Summary of Calibration and Input Addresses

SB5 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SB5 004 - Set Speed of the Selective Control Valve, Status

SB5 011 - 12-Volt Supply Voltage of the Stepper Motor

SB5 012 - Temperature of the Stepper Motor of the Selective Control Valve

SB5 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SB5 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SB5 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SB5 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SB5 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SB5 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SB5 050 - Communication with other Control Units, Configuration

SB5 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SB5 100 - Deadband Range of the Selective Control Valve, Status

SB5 120 - Operating Mode of the Stepper Motor, Status

Group SB6: SB6 Control Software

SB6 Control Software, Summary of References

SB6 Control Software, Summary of Addresses

SB6 Control Software, Summary of Calibration and Input Addresses

SB6 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SB6 004 - Set Speed of the Selective Control Valve, Status

SB6 011 - 12-Volt Supply Voltage of the Stepper Motor

SB6 012 - Temperature of the Stepper Motor of the Selective Control Valve

SB6 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SB6 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SB6 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SB6 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SB6 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SB6 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SB6 050 - Communication with other Control Units, Configuration

SB6 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SB6 100 - Deadband Range of the Selective Control Valve, Status

SB6 120 - Operating Mode of the Stepper Motor, Status

Group SBJ: SBJ Control Software

SBJ Control Software, Summary of References

SBJ Control Software, Summary of Addresses

SBJ Control Software, Summary of Calibration and Input Addresses

SBJ 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SBJ 004 - Set Speed of the Selective Control Valve, Status

SBJ 011 - 12-V Supply Voltage of the Stepper Motor

SBJ 012 - Temperature of the Stepper Motor of the Selective Control Valve

SBJ 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SBJ 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SBJ 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SBJ 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SBJ 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SBJ 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SBJ 050 - Communication with Other Control Units, Configuration

SBJ 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SBJ 100 - Deadband Range of the Selective Control Valve, Status

SBJ 120 - Operating Mode of the Stepper Motor, Status

Group SBK: SBK Control Software

SBK Control Software, Summary of References

SBK Control Software, Summary of Addresses

SBK Control Software, Summary of Calibration and Input Addresses

SBK 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SBK 004 - Set Speed of the Selective Control Valve, Status

SBK 011 - 12-V Supply Voltage of the Stepper Motor

SBK 012 - Temperature of the Stepper Motor of the Selective Control Valve

SBK 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SBK 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SBK 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SBK 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SBK 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SBK 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SBK 050 - Communication with Other Control Units, Configuration

SBK 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SBK 100 - Deadband Range of the Selective Control Valve, Status

SBK 120 - Operating Mode of the Stepper Motor, Status

Group SBL: SBL Control Software

SBL Control Software, Summary of References

SBL Control Software, Summary of Addresses

SBL Control Software, Summary of Calibration and Input Addresses

SBL 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SBL 004 - Set Speed of the Selective Control Valve, Status

SBL 011 - 12-V Supply Voltage of the Stepper Motor

SBL 012 - Temperature of the Stepper Motor of the Selective Control Valve

SBL 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SBL 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SBL 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SBL 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SBL 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SBL 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SBL 050 - Communication with Other Control Units, Configuration

SBL 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SBL 100 - Deadband Range of the Selective Control Valve, Status

SBL 120 - Operating Mode of the Stepper Motor, Status

Group SBM: SBM Control Software

SBM Control Software, Summary of References

SBM Control Software, Summary of Addresses

SBM Control Software, Summary of Calibration and Input Addresses

SBM 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SBM 004 - Set Speed of the Selective Control Valve, Status

SBM 011 - 12-V Supply Voltage of the Stepper Motor

SBM 012 - Temperature of the Stepper Motor of the Selective Control Valve

SBM 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SBM 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SBM 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SBM 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SBM 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SBM 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SBM 050 - Communication with Other Control Units, Configuration

SBM 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SBM 100 - Deadband Range of the Selective Control Valve, Status

SBM 120 - Operating Mode of the Stepper Motor, Status

Group SBN: SBN Control Software

SBN Control Software, Summary of References

SBN Control Software, Summary of Addresses

SBN Control Software, Summary of Calibration and Input Addresses

SBN 003 - Specified Flow Speed and Direction of the Selective Control Valve, Status

SBN 004 - Set Speed of the Selective Control Valve, Status

SBN 011 - 12-V Supply Voltage of the Stepper Motor

SBN 012 - Temperature of the Stepper Motor of the Selective Control Valve

SBN 020 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Retract Direction, Configuration

SBN 021 - Valve Position at the Beginning of the LS Pressure Buildup (Deadband End Pressure Build-up) in Extend Direction, Configuration

SBN 022 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Retract Direction, Configuration

SBN 023 - Valve Position at the Beginning of the Venting in the Tank (Deadband End Venting) in Extend Direction, Configuration

SBN 024 - Selection of the Deadband End Valve Position in Retract Direction, Configuration

SBN 025 - Selection of the Deadband End Valve Position in Extend Direction, Configuration

SBN 050 - Communication with other Control Units, Configuration

SBN 051 - Assigned Address of the Stepper Motor of the Selective Control Valve, Configuration

SBN 100 - Deadband Range of the Selective Control Valve, Status

SBN 120 - Operating Mode of the Stepper Motor, Status

Group SCC: SCC Control Software

SCC Control Software - Summary of References

SCC Control Software - Summary of Addresses

SCC Control Software - Summary of Calibration and Input Addresses

SCC 002 - Control Software Beep Mode

SCC 003 - Supply Voltage (ELX)

SCC 004 - Supply Voltage (BAT)

SCC 005 - Supply Voltage E-SCV I to E-SCV VI

SCC 010 - Activation of function I - VI (E-ICV), configuration

SCC 011 - Control Lever for E-SCV I, Status

SCC 012 - Commanded Movement for E-SCV I, Status

SCC 013 - Expected Flow for E-SCV I, Percent

SCC 014 - Flow for E-SCV I (Extend), Configuration

SCC 015 - Flow for E-SCV I (Retract), Configuration

SCC 016 - E-SCV I Detent Time (Extend), Configuration

SCC 017 - E-SCV I Detent Time (Retract), Configuration

SCC 018 - E-SCV I Settings, Configuration

SCC 019 - E-SCV I Quick Raise/Lower Function, Configuration

SCC 020 - E-SCVs, Configuration

SCC 021 - Control Lever for E-SCV II, Status

SCC 022 - Commanded Movement for E-SCV II, Status

SCC 023 - Expected Flow for E-SCV II, Percent

SCC 024 - Flow for E-SCV II (Extend), Configuration

SCC 025 - Flow for E-SCV II (Retract), Configuration

SCC 026 - E-SCV II Detent Time (Extend), Configuration

SCC 027 - E-SCV II Detent Time (Retract), Configuration

SCC 028 - E-SCV II Settings, Configuration

SCC 029 - E-SCV II Quick Raise/Lower Function, Configuration

SCC 030 - SCV Lock, Configuration

SCC 031 - Control Lever for E-SCV III, Status

SCC 032 - Commanded Movement for E-SCV III, Status

SCC 033 - Expected Flow for E-SCV III, Percent

SCC 034 - Flow for E-SCV III (Extend), Configuration

SCC 035 - Flow for E-SCV III (Retract), Configuration

SCC 036 - E-SCV III Detent Time (Extend), Configuration

SCC 037 - E-SCV III Detent Time (Retract), Configuration

SCC 038 - E-SCV III Settings, Configuration

SCC 039 - E-SCV III Quick Raise/Lower Function, Configuration

SCC 040 - E-SCV Control Lever, Status

SCC 041 - Control Lever for E-SCV IV, Status

SCC 042 - Commanded Movement for E-SCV IV, Status

SCC 043 - Expected Flow for E-SCV IV, Percent

SCC 044 - Flow for E-SCV IV (Extend), Configuration

SCC 045 - Flow for E-SCV IV (Retract), Configuration

SCC 046 - E-SCV IV Detent Time (Extend), Configuration

SCC 047 - E-SCV IV Detent Time (Retract), Configuration

SCC 048 - E-SCV IV Settings, Configuration

SCC 049 - E-SCV IV Quick Raise/Lower Function, Configuration

SCC 051 - Control Lever for E-SCV V, Status

SCC 052 - Commanded Movement for E-SCV V, Status

SCC 053 - Expected Flow for E-SCV V, Percent

SCC 054 - Flow for E-SCV V (Extend), Configuration

SCC 055 - Flow for E-SCV V (Retract), Configuration

SCC 056 - E-SCV V Detent Time (Extend), Configuration

SCC 057 - E-SCV V Detent Time (Retract), Configuration

SCC 058 - E-SCV V Settings, Configuration

SCC 059 - E-SCV V Quick Raise/Lower Function, Configuration

SCC 060 - Status of Remote Control Switch, Configuration

SCC 061 - Control Lever for E-SCV VI, Status

SCC 062 - Commanded Movement for E-SCV VI, Status

SCC 063 - Expected Flow for E-SCV VI, Percent

SCC 064 - Flow for E-SCV VI (Extend), Configuration

SCC 065 - Flow for E-SCV VI (Retract), Configuration

SCC 066 - E-SCV VI Detent Time (Extend), Configuration

SCC 067 - E-SCV VI Detent Time (Retract), Configuration

SCC 068 - E-SCV VI Settings, Configuration

SCC 069 - E-SCV VI Quick Raise/Lower Function, Configuration

SCC 141 - Control Lever for E-SCV XIV, Status

SCC 142 - Commanded Movement for E-SCV XIV, Status

SCC 143 - Expected Flow for E-SCV XIV, Percent

SCC 144 - Flow for E-SCV XIV (Extend), Configuration

SCC 145 - Flow for E-SCV XIV (Retract), Configuration

SCC 146 - E-SCV XIV Detent Time (Extend), Configuration

SCC 147 - E-SCV XIV Detent Time (Retract), Configuration

SCC 148 - E-SCV XIV Settings, Configuration

SCC 149 - E-SCV XIV Quick Raise/Lower Function, Configuration

SCC 150 - Configurability of the Controls, Configuration

B167 - Hydraulic Oil Level Sensor, Status

B168 - Hydraulic Oil Pressure Sensor

B169 - Hydraulic Oil Pressure Sensor, Voltage

SCC 170 - Multi-Function Lever, Status

SCC 171 - Multi-Function Lever Present, Configuration

SCC 172 - Selective Control Valve for Multi-Function Lever (Left/Right), Configuration

SCC 173 - Selective Control Valve for Multi-Function Lever (Forward/Backward), Configuration

SCC 174 - Selective Control Valve for Multi-Function Lever (Third Function), Configuration

SCC 178 - CAN Bus - E-SCV and Rear Hitch, Signal Voltage

Group SCO: SCO Control Software

SCO Control Software - Summary of References

SCO Control Software - Summary of Addresses

SCO Control Software - Summary of Calibration and Input Addresses

SCO 002 - Beep Mode of Control Software

SCO 003 - Supply Voltage (ELX)

SCO 004 - Supply Voltage (BAT)

SCO 007 - Supply Voltage for E-SCV XII, E-SCV XIII and E-SCV XIV

SCO 008 - Supply Voltage for E-SCV X and E-SCV XI

SCO 020 - E-SCVs, Configuration

SCO 020 - Selective Control Valve E-SCV X, Calibration

SCO 030 - SCV Lock, Configuration

SCO 040 - E-SCV Control Lever, Status

SCO 060 - Status of Remote Control Switch, Configuration

SCO 100 - Activation of Function X - XIII, Configuration

SCO 101 - Front Hitch, Status

SCO 102 - Commanded Movement for E-SCV X, Status

SCO 103 - Expected Flow for E-SCV X, Percent

SCO 104 - Flow for E-SCV X (Extend), Configuration

SCO 105 - Flow for E-SCV X (Retract), Configuration

SCO 106 - E-SCV X Detent Time (Extend), Configuration

SCO 107 - E-SCV X Detent Time (Retract), Configuration

SCO 108 - E-SCV II Settings, Configuration

SCO 109 - E-SCV X Quick Raise/Lower Function, Configuration

SCO 110 - Front Hitch Position Sensor, Voltage

SCO 111 - Control Lever for E-SCV XI, Status

SCO 112 - Commanded Movement for E-SCV XI, Status

SCO 113 - Expected Flow for E-SCV XI, Percent

SCO 114 - Flow for E-SCV XI (Extend), Configuration

SCO 115 - Flow for E-SCV XI (Retract), Configuration

SCO 116 - E-SCV XI Detent Time (Extend), Configuration

SCO 117 - E-SCV XI Detent Time (Retract), Configuration

SCO 118 - E-SCV XI Settings, Configuration

SCO 119 - E-SCV XI Quick Raise/Lower Function, Configuration

SCO 121 - Control Lever for E-SCV XI, Status

SCO 122 - Commanded Movement for E-SCV XII, Status

SCO 123 - Expected Flow for E-SCV XII, Percent

SCO 124 - Flow for E-SCV XII (Extend), Configuration

SCO 125 - Flow for E-SCV XII (Retract), Configuration

SCO 126 - E-SCV XII Detent Time (Extend), Configuration

SCO 127 - E-SCV XII Detent Time (Retract), Configuration

SCO 128 - E-SCV XII Settings, Configuration

SCO 129 - E-SCV XII Quick Raise/Lower Function, Configuration

SCO 131 - Control Lever for E-SCV XIII, Status

SCO 132 - Commanded Movement for E-SCV XIII, Status

SCO 133 - Expected Flow for E-SCV XIII, Percent

SCO 134 - Flow for E-SCV XIII (Extend), Configuration

SCO 135 - Flow for E-SCV XIII (Retract), Configuration

SCO 136 - E-SCV XIII Detent Time (Extend), Configuration

SCO 137 - E-SCV XIII Detent Time (Retract), Configuration

SCO 138 - E-SCV XIII Settings, Configuration

SCO 139 - E-SCV XIII Quick Raise/Lower Function, Configuration

SCO 141 - Control Lever for E-SCV XIV, Status

SCO 142 - Commanded Movement for E-SCV XIV, Status

SCO 143 - Expected Flow for E-SCV XIV, Percent

SCO 144 - Flow for E-SCV XIV (Extend), Configuration

SCO 145 - Flow for E-SCV XIV (Retract), Configuration

SCO 146 - E-SCV XIV Detent Time (Extend), Configuration

SCO 147 - E-SCV XIV Detent Time (Retract), Configuration

SCO 148 - E-SCV XIV Settings, Configuration

SCO 149 - E-SCV XIV Quick Raise/Lower Function, Configuration

SCO 150 - Configurability of the Controls, Configuration

SCO 167 - Hydraulic Oil Level Sensor, Status

SCO 168 - Hydraulic Oil Pressure Sensor

SCO 169 - Hydraulic Oil Pressure Sensor, Voltage

SCO 170 - Multi-Function Lever, Status

SCO 171 - Multi-Function Lever Present, Configuration

SCO 172 - Selective Control Valve for Multi-Function Lever (Left/Right), Configuration

SCO 173 - Selective Control Valve for Multi-Function Lever (Forward/Backward), Configuration

SCO 174 - Selective Control Valve for Multi-Function Lever (Third Function), Configuration

SCO 178 - CAN Bus - E-SCV and Front Hitch, Signal Voltage

SCO 180 - Displays of Addresses for the Return-to-Position Function, Configuration

SCO 182 - Sensor for Position of Loader Boom (Channel 1), Percent

SCO 183 - Sensor for Position of Loader Boom (Channel 2), Percent

SCO 184 - Sensor for Position of Loader Boom, Angle

SCO 185 - Sensor for Position of Loader Bucket, Percent

SCO 186 - Angle of Loader Bucket

SCO 187 - Front Loader Type, Configuration

SCO 188 - Stepper Motors for Return-to-Position Function, Calibration

SCO 189 - Front Loader with Return-to-Position Function, Calibration

SCO 190 - Correction Value for Angle of Loader Boom, Angle

SCO 191 - Correction Value for Angle of Loader Bucket 1

SCO 192 - Correction Value for Angle of Loader Bucket 2

SCO 193 - Calibration for Return-to-Position Function, Status

SCO 194 - Fine-Tuning Calibration of Self-Levelling for Return-to-Position Function, Calibration

SCO 195 - Calibrated Values of Fine-Tuning Calibration of Self-Levelling, Status

SCO 196 - Return-to-Position Function, Status

SCO 197 - Activation Switch of Multi-Function Lever, Status

SCO 198 - Hydraulic Pump Displacement, Status

SCO 199 - Automatic Deactivation of Front Loader Suspension, Configuration

Group SFA: SFA Control Software

SFA Control Software - Summary of References

SFA Control Software - Summary of Addresses

SFA Control Software - Summary of Calibration and Input Addresses

SFA 002 - Control Software Beep Mode

SFA 003 - Supply Voltage (BAT)

SFA 004 - 5-V Supply Voltage

SFA 005 - Sensor for Position of Suspended Front-Wheel Drive Axle, Voltage

SFA 006 - Suspended Front-Wheel Drive Axle Oil Pressure Sensor, Voltage

SFA 007 - Suspended Front-Wheel Drive Axle Solenoid Valves, Status

SFA 010 - Solenoid Valve for Raising the Suspended Front-Wheel Drive Axle, Current

SFA 011 - Solenoid Valve for Lowering the Suspended Front-Wheel Drive Axle, Current

SFA 012 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Build-up, Current

SFA 013 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Reduction, Current

SFA 015 - Suspended Front-Wheel Drive Axle Oil Pressure Sensor, Pressure

SFA 020 - Suspended Front-Wheel Drive Axle Position Sensor, Calibration

SFA 021 - Suspended Front-Wheel Drive Axle, Calibration

SFA 022 - Suspended Front-Wheel Drive Axle Position Sensor and Bleeding the System, Calibration

SFA 023 - Suspended Front-Wheel Drive Axle Oil Pressure Sensor Test

SFA 024 - Relieve Pressure in the Hydraulic System of the Suspended Front-Wheel Drive Axle

SFA 030 - Suspended Front-Wheel Drive Axle Position Sensor - Upper Stop, Voltage

SFA 031 - Suspended Front-Wheel Drive Axle Position Sensor - Center Position, Voltage

SFA 032 - Suspended Front-Wheel Drive Axle Position Sensor - Lower Stop, Voltage

SFA 033 - Voltage at Maximum Pressure on Suspended Front-Wheel Drive Axle Oil Pressure Sensor

SFA 034 - Maximum Pressure on Suspended Front-Wheel Drive Axle Oil Pressure Sensor

SFA 035 - Voltage at Minimum Pressure on Suspended Front-Wheel Drive Axle Oil Pressure Sensor

SFA 036 - Minimum Pressure on Suspended Front-Wheel Drive Axle Oil Pressure Sensor

SFA 059 - Pressure Command in MAX Mode, Configuration

SFA 080 - Draft Sensors Present/Not Present, Configuration

SFA 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

SFA 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group TEC: TEC Control Software

TEC Control Software - Summary of References

TEC Control Software - Summary of Addresses

TEC Control Software - Summary of Calibration and Input Addresses

TEC 002 - Beep Mode of Control Software

TEC 005 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN -)

TEC 006 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN +)

TEC 007 - Implement CAN Bus, Signal Voltage (CAN -)

TEC 008 - Implement CAN Bus, Signal Voltage (CAN +)

TEC 009 - Supply Voltage (ELX)

TEC 031 - Lighting Options 1 of the Implement Worklights, Configuration

TEC 032 - Lighting Options 2 of the Implement Worklights, Configuration

TEC 033 - Lighting Options 3 of the Implement Worklights, Configuration

TEC 034 - Lighting Options 4 of the Implement Worklights, Configuration

TEC 040 - Display of Available Implements

TEC 050 - AutoTrac™ Control, Status

TEC 051 - E-SCV I Control, Status

TEC 052 - E-SCV II Control, Status

TEC 053 - E-SCV III Control, Status

TEC 054 - E-SCV IV Control, Status

TEC 055 - E-SCV V Control, Status

TEC 056 - E-SCV VI Control, Status

TEC 060 - E-SCV X Control, Status

TEC 061 - E-SCV XI Control, Status

TEC 062 - E-SCV XII Control, Status

TEC 063 - E-SCV XIII Control, Status

TEC 064 - E-SCV XIV Control, Status

TEC 065 - E-SCV XV Control, Status

TEC 066 - E-SCV XVI Control, Status

TEC 067 - Travel Speed Control, Status

TEC 068 - Front-Wheel Drive Control, Status

TEC 069 - Differential Lock Control, Status

TEC 070 - Front Hitch Control, Status

TEC 071 - Rear Hitch Control, Status

TEC 072 - Front PTO Control, Status

TEC 073 - Rear PTO Control, Status

TEC 075 - Transmission Control, Status

TEC 076 - Field Cruise Control, Status

TEC 077 - Travel Strategy Control, Status

TEC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

TEC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group TEI: TEI Control Software

TEI Control Software - Summary of References

TEI Control Software - Summary of Addresses

TEI Control Software - Summary of Calibration and Input Addresses

TEI 002 - Control Software Beep Mode

TEI 005 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN -)

TEI 006 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN +)

TEI 007 - Implement CAN Bus, Signal Voltage (CAN -)

TEI 008 - Implement CAN Bus, Signal Voltage (CAN +)

TEI 009 - Supply Voltage (ELX)

TEI 031 - Lighting Options 1 of the Implement Worklights, Configuration

TEI 032 - Lighting Options 2 of the Implement Worklights, Configuration

TEI 033 - Lighting Options 3 of the Implement Worklights, Configuration

TEI 034 - Lighting Options 4 of the Implement Worklights, Configuration

TEI 040 - Display of Available Implements

TEI 050 - AutoTrac™ Control, Status

TEI 051 - E-SCV I Control, Status

TEI 052 - E-SCV II Control, Status

TEI 053 - E-SCV III Control, Status

TEI 054 - E-SCV IV Control, Status

TEI 055 - E-SCV V Control, Status

TEI 056 - E-SCV VI Control, Status

TEI 060 - E-SCV X Control, Status

TEI 061 - E-SCV XI Control, Status

TEI 062 - E-SCV XII Control, Status

TEI 063 - E-SCV III Control, Status

TEI 064 - E-SCV XIV Control, Status

TEI 067 - Travel Speed Control, Status

TEI 068 - Front-Wheel Drive Control, Status

TEI 069 - Differential Lock Control, Status

TEI 070 - Front Hitch Control, Status

TEI 071 - Rear Hitch Control, Status

TEI 072 - Front PTO Control, Status

TEI 073 - Rear PTO Control, Status

TEI 075 - Transmission Control, Status

TEI 076 - Field Cruise Control, Status

TEI 077 - Travel Strategy Control, Status

TEI 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

TEI 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group TIA: TIA Control Software

TIA Control Software - Summary of References

TIA Control Software - Summary of Addresses

TIA Control Software - Summary of Calibration and Input Addresses

TIA 002 - Control Software Beep Mode

TIA 031 - Maximum Speed, Status

TIA 032 - Front Axle Brake Control, Configuration

TIA 033 - Power Increase of Engine, Status

TIA 034 - Speed Display in km/h or mph, Status

TIA 036 - Tractor Model, Status

TIA 037 - Sensor Unit for Speed Control Lever, Speed

TIA 038 - Calculated Speed of Sensor Unit for Speed Control Lever

TIA 039 - Reverse Drive Lever

TIA 042 - Tire Index (SRI) of Mounted Rear Wheel, Status

TIA 043 - Ratio of Front-Wheel Drive, Configuration

TIA 045 - 5-V Supply Voltage

TIA 046 - Front-Wheel Drive Axle Speed Sensor

TIA 047 - Transmission Output Speed Sensor

TIA 050 - Enable for Debug Data, Configuration

TIA 053 - Maximum Speed, Configuration

TIA 054 - Speed, Status

TIA 060 - Engine Speed (ECO) with Rear PTO Switched On, Status

TIA 061 - Engine Speed (ECO) with Rear PTO Switched Off, Status

TIA 062 - Operating Modes, Configuration

TIA 063 - Forward Speed Limitation, Configuration

TIA 064 - Reverse Speed Limitation, Configuration

TIA 099 - Service Advisor, Configuration

TIA 112 - Tractor-Implement Automation™ Error Messages, Status

TIA 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

TIA 246 - Number of CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group TID: TID Control Software

TID Control Software, Summary of References

TID Control Software, Summary of Addresses

TID Control Software, Summary of Input Addresses

TID 029 - Engine Integrated Shifting, Configuration

TID 030 - Forward/Reverse Speed Ratio, Configuration

TID 031 - Operating Modes, Configuration

TID 032 - Start-Up Gear, Configuration

TID 033 - Start-Up Gear 1 and 2, Configuration

TID 034 - Forward Speed Limitation, Configuration

TID 035 - Reverse Speed Limitation, Configuration

TID 042 - Tire Size, Status

TID 053 - Maximum Speed, Configuration

TID 054 - Speed, Status

TID 059 - Auto Mode, Configuration

TID 111 - Speed Change Message on CommandCenter™, Configuration

TID 184 - Enable Debug Data, Configuration

TID 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

TID 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group TIQ: TIQ Control Software

TIQ Control Software - Summary of References

TIQ Control Software - Summary of Addresses

TIQ Control Software - Summary of Calibration and Input Addresses

TIQ 002 - Control Software Beep Mode

TIQ 004 - Advanced CAN-Bus Troubleshooting

TIQ 005 - Advanced CAN Bus Troubleshooting

TIQ 014 - Transmission Shaft, Speed

TIQ 026 - Automatic Shift Points, Configuration

TIQ 029 - Engine Integrated Shifting, Configuration

TIQ 030 - Forward/Reverse Speed Ratio, Configuration

TIQ 042 - Tire Diameter, Status

TIQ 053 - Speed Limit, Configuration

TIQ 054 - Maximum Speed, Factory Setting

TIQ 099 - Service ADVISOR Access

TIQ 135 - Transmission Functions, Configuration

TIQ 136 - Automatic Gear Selection at Start-up, Configuration

TIQ 156 - Automatic Shifting in Reverse Travel, Configuration

TIQ 157 - Parameters for Automatic Speed Matching, Configuration

TIQ 158 - Value for Automatic Downshifting in Power Mode, Configuration 1

TIQ 160 - Value for Automatic Upshifting in Power Mode, Configuration 2

TIQ 162 - Value for Automatic Downshifting in ECO Mode, Configuration 1

TIQ 164 - Value for Automatic Upshifting in ECO Mode, Configuration 2

TIQ 167 - Switch Hand Clutch On/Off, Configuration

TIQ 168 - Hand clutch switch present/not present, configuration

TIQ 169 - Brake Pedal Latch, Status

TIQ 199 - Keep Customer Settings when Reprogramming, Configuration

TIQ 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

TIQ 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group VLC: VLC Control Software

VLC Control Software - Summary of References

VLC Control Software - Summary of Addresses

VLC Control Software - Summary of Calibration and Input Addresses

VLC 002 - Control Software Beep Mode

VLC 015 - Wake-up Signal, Status

VLC 020 - Left High-Beam Headlight, Display in Amps and Status

VLC 021 - Right High-Beam Headlight, Display in Amps and Status

VLC 022 - Left Low-Beam Headlight, Display in Amps and Status

VLC 023 - Right Low-Beam Headlight, Display in Amps and Status

VLC 024 - Left Front Corner Worklight, Display in Amps and Status

VLC 025 - Right Front Corner Worklight, Display in Amps and Status

VLC 036 - Windshield Washer Pump, Display in Amps and Status

VLC 037 - Rear Window Washer Pump, Display in Amps and Status

VLC 045 - Control Software Input Current, Display in Amps

VLC 046 - Supply Voltage (BAT)

VLC 048 - Left Trailer Turn-Signal Light, Display in Amps and Status

VLC 049 - Right Trailer Turn-Signal Light, Display in Amps and Status

VLC 050 - Tractor Series, Configuration

VLC 051 - Turn-Signal Lights and Window Washer System, Configuration

VLC 060 - Forced Shut-Off of Lighting, Configuration

VLC 099 - Stored Maximum Temperature of Control Unit

VLC 102 - Information on Temperature of Rear Chassis Control Unit (below - 40 °C), Display in %

VLC 103 - Information on Temperature of Rear Chassis Control Unit (from - 40 °C to 24 °C), Display in %

VLC 104 - Information on Temperature of Rear Chassis Control Unit (from 25 °C to 50 °C), Display in %

VLC 105 - Information on Temperature of Rear Chassis Control Unit (from 51 °C to 69 °C), Display in %

VLC 106 - Information on Temperature of Rear Chassis Control Unit (from 70 °C to 84 °C), Display in %

VLC 107 - Information on Temperature of Rear Chassis Control Unit (from 85 °C to 105 °C), Display in %

VLC 108 - Information on Temperature of Rear Chassis Control Unit (above 105 °C), Display in %

VLC 120 - Stored Maximum Output Current of Control Unit

VLC 121 - Voltage at Which the Stored Maximum Output Current of Control Unit was Determined

VLC 245 - Number of CAN Bus Off Retries (Vehicle CAN Bus (500 kBd)), Configuration

VLC 246 - CAN Bus Off Intervals (Vehicle CAN Bus (500 kBd)), Configuration

Group VTI: VTI Control Software

VTI Control Software - Summary of References

VTI Control Software - Summary of Addresses

VTI Control Software, Summary of Calibration and Input Addresses

VTI 002 - Beep Mode of Control Software

VTI 008 - Supply Voltage (BAT)

VTI 009 - Supply Voltage (ELX)

VTI 010 - Internal Temperature of GS2 Series GreenStar Display

VTI 011 - Vehicle CAN Bus (500 kBd), Status

VTI 012 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN +)

VTI 013 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN -)

VTI 015 - Implement CAN Bus, Status

VTI 016 - Implement CAN Bus, Signal Voltage (CAN +)

VTI 017 - Implement CAN Bus, Signal Voltage (CAN -)

VTI 018 - Writing the Internal Memory, Status

VTI 019 - Operating Hours of GS2 Series GreenStar Display

VTI 032 - Real Time Clock, Status

VTI 033 - Duration of Time in Standby Mode, Configuration

VTI 035 - USB Port, Status

VTI 036 - Permitted Number of Subsequent Warm Starts, Configuration

VTI 038 - Synchronization of Brightness with Brightness of Cab Instrument Panel, Configuration

VTI 039 - Daytime Brightness, Configuration

VTI 040 - Daytime Brightness Compared to Brightness of Cab Instrument Panel, Configuration

VTI 041 - Nighttime Brightness, Configuration

VTI 042 - Nighttime Brightness Compared to Brightness of Cab Instrument Panel, Configuration

VTI 043 - Volume of Internal Acoustic Alarm, Configuration

VTI 045 - Country Settings, Configuration

VTI 046 - Language Settings, Configuration

VTI 047 - Numeric Format Setting, Configuration

VTI 048 - Date Format Setting, Configuration

VTI 049 - Time Format Setting, Configuration

VTI 050 - Units of Distance Settings, Configuration

VTI 051 - Units of Area Settings, Configuration

VTI 052 - Units of Volume Settings, Configuration

VTI 053 - Units of Mass Settings, Configuration

VTI 054 - Units of Temperature Settings, Configuration

VTI 055 - Units of Pressure Settings, Configuration

VTI 056 - Units of Force Settings, Configuration

VTI 057 - Synchronization of Time with GPS Time, Configuration

VTI 058 - Current Date Setting, Configuration

VTI 059 - Current Time Setting, Configuration

VTI 061 - UIM Accepts Global Messages, Configuration

VTI 062 - Access Manager Password, Status

VTI 063 - Configure Vehicle Applications

VTI 072 - Configuration of Virtual Terminal Possible via Settings Page, Configuration

VTI 245 - Number of CAN Bus Off Retries, Configuration

VTI 246 - CAN Bus Off Intervals, Configuration

VTI 247 - Model Designation of Current Vehicle, Configuration

VTI 248 - Serial Number of Current Vehicle, Configuration

Group VTV: VTV Control Software

VTV Control Software - Summary of References

VTV Control Software - Summary of Addresses

VTV Control Software - Summary of Calibration and Input Addresses

VTV 002 - Beep Mode of Control Software

VTV 008 - Supply Voltage (BAT)

VTV 009 - Supply Voltage (ELX)

VTV 010 - Internal Temperature of CommandCenter™

VTV 012 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN +)

VTV 013 - Vehicle CAN Bus (500 kBd), Signal Voltage (CAN -)

VTV 015 - Implement CAN Bus, Status

VTV 016 - Implement CAN Bus, Signal Voltage (CAN +)

VTV 017 - Implement CAN Bus, Signal Voltage (CAN -)

VTV 018 - Writing the Internal Memory, Status

VTV 019 - Operating Hours of CommandCenter™

VTV 027 - Information about Non-Reacting Core Data, Configuration

VTV 032 - Real Time Clock, Status

VTV 033 - Duration of Time in Standby Mode, Configuration

VTV 035 - USB Port, Status

VTV 036 - Permitted Number of Subsequent Warm Starts, Configuration

VTV 038 - Synchronization of Brightness with Brightness of Cab Instrument Panel, Configuration

VTV 039 - Daytime Brightness, Configuration

VTV 040 - Daytime Brightness Compared to Brightness of Cab Instrument Panel, Configuration

VTV 041 - Nighttime Brightness, Configuration

VTV 042 - Nighttime Brightness Compared to Brightness of Cab Instrument Panel, Configuration

VTV 043 - Volume of Internal Acoustic Alarm, Configuration

VTV 045 - Country Settings, Configuration

VTV 046 - Language Settings, Configuration

VTV 047 - Numeric Format Setting, Configuration

VTV 048 - Date Format Setting, Configuration

VTV 049 - Time Format Setting, Configuration

VTV 050 - Units of Distance Settings, Configuration

VTV 051 - Units of Area Settings, Configuration

VTV 052 - Units of Volume Settings, Configuration

VTV 053 - Units of Mass Settings, Configuration

VTV 054 - Units of Temperature Settings, Configuration

VTV 055 - Units of Pressure Settings, Configuration

VTV 056 - Units of Force Settings, Configuration

VTV 057 - Synchronization of Time with GPS Time, Configuration

VTV 058 - Current Date Setting, Configuration

VTV 059 - Current Time Setting, Configuration

VTV 061 - UIM Accepts Global Messages, Configuration

VTV 063 - Configure Vehicle Applications

VTV 072 - Configuration of Virtual Terminal Possible via Settings Page, Configuration

VTV 199 - Action at Next Startup, Configuration

VTV 245 - Number of CAN Bus Off Retries, Configuration

VTV 246 - CAN Bus Off Intervals, Configuration

Group XMC: XMC Control Software

XMC Control Software - Summary of References

XMC Control Software - Summary of Addresses

XMC Control Software - Summary of Calibration and Input Addresses

XMC 003 - Supply Voltage (BAT)

XMC 004 - Supply Voltage (ELX)

XMC 005 - 5-V Supply Voltage 1

XMC 006 - 5-V Supply Voltage 2

XMC 007 - 5-V Supply Voltage 3

XMC 008 - 5-V Supply Voltage 4

XMC 009 - Watchdog Supply Voltage

XMC 010 - Solenoid Valve Supply Voltage 1

XMC 011 - Solenoid Valve Supply Voltage 2

XMC 012 - Solenoid Valve Supply Voltage 3

XMC 013 - Solenoid Valve Supply Voltage 4

XMC 014 - Internal CAN Bus of Steering Control Unit (AutoTrac™), Signal Voltage (CAN +)

XMC 015 - Internal CAN Bus of Steering Control Unit (AutoTrac™), Signal Voltage (CAN -)

XMC 024 - Brake Calibration

XMC 026 - Brake Boost of Trailer, Configuration

XMC 030 - Display of Addresses XMC 031 and XMC 032, Configuration

XMC 031 - Steering Wheel Position Sensor Channel 1, Status

XMC 032 - Steering Wheel Position Sensor Channel 2, Status

XMC 035 - Steering Wheel Position, Status

XMC 036 - Display of Addresses XMC 037 and XMC 038, Configuration

XMC 037 - Steering Wheel Angle Sensor Channel 1, Status

XMC 038 - Steering Wheel Angle Sensor Channel 2, Status

XMC 041 - Steering Stop Calibration Values, Angle

XMC 042 - Current Wheel Angle

XMC 052 - Display of Addresses XMC 053 and XMC 054, Configuration

XMC 053 - Solenoid for Steering Left, Status

XMC 054 - Solenoid for Steering Right, Status

XMC 150 - XMC Control Software Functions, Status

XMC 155 - Control Software Supply Voltage, Status

XMC 156 - Engine Information, Status

XMC 157 - Wiring Harness Identification, Status

XMC 158 - Operator Presence Switch, Status

XMC 159 - Hydraulic Oil Temperature

XMC 160 - Transmission Information, Status

XMC 161 - GPS Speed

XMC 163 - Travel Speed

XMC 164 - Vehicle Motion, Status

XMC 167 - Yaw Rate, Angle/Time

XMC 168 - Steering Control Mode, Status

XMC 185 - Lateral Error, Distance

XMC 186 - Heading Error, Angle

XMC 187 - Curvature

XMC 188 - Lateral Error Correction Factor, Configuration

XMC 189 - AutoTrac™ - Information, Status

XMC 190 - Exit Code, Status

XMC 191 - Operating Hours of Automatic Steering System

XMC 192 - Wheel Slip, Determined from Travel Speed and GPS Speed, Percent

XMC 245 - Number of CAN Bus Off Retries, Configuration

XMC 246 - CAN Bus Off Intervals, Configuration

Group XSC: XSC Control Software

XSC Control Software - Summary of References

XSC Control Software - Summary of Addresses

XSC Control Software - Summary of Calibration and Input Addresses

XSC 002 - Control Software Beep Mode

XSC 003 - Supply Voltage (BAT)

XSC 004 - Supply Voltage (ELX)

XSC 005 - 5-V Supply Voltage 1

XSC 006 - 5-V Supply Voltage 2

XSC 007 - 5-V Supply Voltage 3

XSC 008 - 5-V Supply Voltage 4

XSC 009 - Watchdog Supply Voltage

XSC 010 - Solenoid Valve Supply Voltage 1

XSC 011 - Solenoid Valve Supply Voltage 2

XSC 012 - Solenoid Valve Supply Voltage 3

XSC 013 - Solenoid Valve Supply Voltage 4

XSC 014 - Internal CAN Bus of Steering Control Unit (AutoTrac™), Signal Voltage (CAN +)

XSC 015 - Internal CAN Bus of Steering Control Unit (AutoTrac™), Signal Voltage (CAN -)

XSC 022 - Wheel Angle Sensor, Calibration

XSC 023 - Steering Control Valve, Calibration

XSC 025 - Tow Mode, Configuration

XSC 026 - Advanced Diagnostics, Calibration

XSC 030 - Display of Addresses XSC 031 and XSC 032, Configuration

XSC 031 - Steering Wheel Position Sensor Channel 1, Status

XSC 032 - Steering Wheel Position Sensor Channel 2, Status

XSC 035 - Steering Wheel Position, Status

XSC 036 - Display of Addresses XSC 037 and XSC 038, Configuration

XSC 037 - Steering Wheel Angle Sensor Channel 1, Status

XSC 038 - Steering Wheel Angle Sensor Channel 2, Status

XSC 041 - Steering Stop Calibration Values, Angle

XSC 042 - Current Wheel Angle

XSC 043 - Display of Addresses XSC 046 to XSC 049, Configuration

XSC 046 - Solenoid Valve for Steering Control Valve (Enable Valve), Status

XSC 049 - Electric Hydraulic Pump, Status

XSC 052 - Display of Addresses XSC 053 and XSC 054, Configuration

XSC 053 - Solenoid for Steering Left, Status

XSC 054 - Solenoid for Steering Right, Status

XSC 150 - XSC Control Software Functions, Status

XSC 155 - Control Software Supply Voltage, Status

XSC 156 - Engine Information, Status

XSC 157 - Wiring Harness Identification, Status

XSC 158 - Operator Presence Switch, Status

XSC 159 - Hydraulic Oil Temperature

XSC 160 - Transmission Information, Status

XSC 161 - GPS Speed

XSC 163 - Travel Speed

XSC 164 - Vehicle Motion, Status

XSC 167 - Yaw Rate, Angle/Time

XSC 168 - Steering Control Mode, Status

XSC 178 - Free Travel of Valve for AutoTrac™, Configuration

XSC 181 - AutoTrac™ Function during Slow Travel, Configuration

XSC 185 - Lateral Error, Distance

XSC 186 - Heading Error, Angle

XSC 187 - Curvature

XSC 188 - Lateral Error Correction Factor, Configuration

XSC 189 - AutoTrac™ Information, Status

XSC 190 - Exit Code, Status

XSC 191 - Operating Hours of Automatic Steering System

XSC 192 - Wheel Slip, Determined from Travel Speed and GPS Speed, Percent

XSC 193 - Sensitivity, Configuration

XSC 194 - Heading Lead, Configuration

XSC 195 - Heading Gain, Configuration

XSC 196 - Sensitivity in Curves, Configuration

XSC 197 - Sensitivity When Entering the Track, Configuration

XSC 198 - Lateral Gain, Configuration

XSC 199 - Inner Loop Scale Factor, Configuration

XSC 245 - Number of CAN Bus Off Retries, Configuration

XSC 246 - CAN Bus Off Intervals, Configuration

Section 249: Electrical Connectors, Wiring Harnesses, and Components

Group 05: Electrical Connectors, Wiring Harnesses, and Components - General Information

Electrical Connectors, Wiring Harnesses, and Components - Special Tools, Summary of References

Group 40: Summary of Electrical Components and Harnesses

Summary of Electrical Components, Summary of References

Summary of Wiring Harnesses, Summary of References

Summary of Fuses and Relays

Summary of Connectors, Summary of References

Summary of Ground Points, Summary of References

Group 40A: Electrical Components - Assemblies

A3 - Valve Block (AutoPowr™/IVT™ Transmission), Component Information

A012 - Control Unit in the CommandARM™, Component Information

A013 - Transmission Control Unit (AutoPowr™/IVT™ Transmission), Component Information

A017 - Control Unit for Front Loader Automation, Component Information

A021 - Engine Control Unit, Component Information

A023 - LIN Bus Module (Shift Console), Component Information

A029 - Seat with Compressor and Heater, Component Information

A051 - GreenStar™ Mobile Processor, Component Information

A052 - StarFire™ ITC receiver, component information

A053 - CAN Bus Terminating Resistor (Implement CAN Bus), Component Information

A058 - Air-Conditioning Control Unit, Component Information

A077 - Electrical Cooling Compartment, Component Information

A090 - Implement Socket (Rear), Component Information

A091 - Front Implement Socket, Component Information

A114 - Control Unit for Gear Shifting (DirectDrive Transmission), Component Information

A115 - Control Unit for Range Shifting (DirectDrive Transmission), Component Information

A117 - Check speaker (left rear), component information

A118 - Right Rear Speaker, Component Information

A119 - Cab Control Unit, Component Information

A121 - Front Chassis Control Unit (M400), Component Information

A123 - Rear Chassis Control Unit, Component Information

A124 - Roof Control Unit, Component Information

A130 - CAN Bus Terminating Resistor (CAN Bus - Implement), Component Information

A132 - Steering Control Unit (AutoTrac™), Component Information

A133 - Immobilizer Control Unit, Component Information

A137 - CAN Bus Terminating Resistor (CAN Bus - Implement), Component Information

A139 - Radio (Retrofit), Component Information

A140 - Radio, Component Information

A141 - Audio Interface (USB / 3,5 mm Stereo Jack), Component Information

A142 - XM Satellite Radio, Component Information

A146 - Voltage Converter, Component Information

A151 - Left Front Speaker, Component Information

A152 - Speaker (right front), component information

A153 - Front Chassis Control Unit (M50), Component Information

A155 - Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote), Component Information

A155 - Control Unit for Telematics (JDLink™ / Service ADVISOR™ Remote) (4G) (from CIU End 2017), Component Information

A156 - Processor 4100, Component Information

A156 - Processor 4600, Component Information

A157 - Video Camera 1, Component Information

A158 - Video Camera 2, Component Information

A159 - Ethernet Network Splitter, Component Information

A159 - Ethernet Network Splitter (from CIU End 2017), Component Information

A160 - Control Unit for John Deere Machine Sync, Component Information

A161 - Control Unit for Power-Assisted Rear PTO Shifting (PAPTOS), Component Information

A162 - Reverse Drive Lever (PowrQuad™ Transmission), Component Information

A163 - Reverse Drive Lever (AutoPowr™/IVT™ Transmission), Component Information

A164 - Reverse Drive Lever (DirectDrive Transmission), Component Information

A165 - Instrument Unit (PowrQuad™ Transmission), Component Information

A166 - Instrument Unit (AutoPowr™/IVT™ Transmission), Component Information

A167 - Instrument Unit (DirectDrive Transmission), Component Information

B5501 - DEF Dosing Unit, Component Information

B5506 - DEF Module, Component Information

P019 - GreenStar™ Display (GSD4), Component Information

P029 - GreenStar™ Display (GS2/3) (A-Post), Component Information

P030 - GreenStar™ Display (GS2/3) (C-Post), Component Information

P031 - CommandCenter™ (CommandARM™), Component Information

P032 - CommandCenter™ (Shift Console), Component Information

P033 - Monitor (A-Post), Component Information

P034 - Monitor (C-Post), Component Information

S046 - Module with Button for Transport Lock of the E-SCVs and Button for ISOBUS (ISO), Component Information

S047 - LIN Bus Module (Position H), Component Information

S048 - LIN Bus Module (Position W), Component Information

S050 - LIN Bus Module (Position D), Component Information

S051 - LIN Bus Module (Position E), Component Information

S052 - LIN Bus Module (Position P), Component Information

S053 - LIN Bus Module (Position F), Component Information

S054 - LIN Bus Module (Position G), Component Information

S057 - LIN Bus Module (Position M), Component Information

S064 - LIN Bus Module (Position F and G), Component Information

S065 - LIN Bus Module (Position S), Component Information

S066 - LIN Bus Module (Position K), Component Information

S070 - Sensor Unit for Speed Control Lever, Component Information

S071 - Shift Unit (DirectDrive Transmission), Component Information

S075 - LIN Bus Module (Multi-Function Lever), Component Information

S175 - Control Unit for Cab Switch Module, Component Information

Group 40B: Electrical Components - Sensors

B1 - Sensor for Transmission Input Speed (AutoPowr™/IVT™ Transmission), Component Information

B2 - Hydrostatic Speed Sensor (AutoPowr™/IVT™ Transmission), Component Information

B4 - Sensor for Transmission Output Speed (AutoPowr™/IVT™ Transmission), Component Information

B7 - Transmission Oil Temperature Sensor (AutoPowr™/IVT™ Transmission), Component Information

B8 - Sensor for Lube Oil Pressure (AutoPowr™/IVT™ Transmission), Component Information

B11 - Transmission Oil Pressure Sensor (AutoPowr™/IVT™ Transmission), Component Information

B006 - Sensor for Rear PTO Speed, Component Information

B007 - Transmission Oil Filter Pressure Switch, Component Information

B009 - Wheel Speed Sensor, Component Information

B019 - Right Draft Sensor, Component Information

B020 - Left Draft Sensor, Component Information

B021 - Rear Hitch Position Sensor, Component Information

B022 - Sensor for Piston Rod Pressure (Loader Bucket), Component Information

B023 - Piston Pressure Sensor (Loader Bucket), Component Information

B024 - Sensor for Piston Rod Pressure (Loader Boom), Component Information

B025 - Piston Pressure Sensor (Loader Boom), Component Information

B029 - Sensor for Position of Loader Boom, Component Information

B030 - Sensor for Position of Loader Bucket, Component Information

B031 - Transmission Oil Pressure Switch, Component Information

B039 - Ground Speed Sensor (Radar), Component Information

B041 - Draft Sensor, Component Information

B043 - Sensor 2 of the Inertial Measurement Unit, Component Information

B053 - Sensor for Position of Suspended Front-Wheel Drive Axle, Component Information

B058 - Sensor for Front PTO Speed, Component Information

B060 - Sensor for Transmission Oil Temperature, Component Information

B065 - Clutch Pedal Potentiometer, Component Information

B078 - Hand Throttle Potentiometer (PowrQuad™ Transmission), Component Information

B079 - Accelerator Pedal Potentiometer, Component Information

B084 - Wheel Speed Sensor (AutoPowr™/IVT™ Transmission), Component Information

B089 - Sensor for Speed of Front-Wheel Drive Axle (AutoPowr™/IVT™ Transmission), Component Information

B090 - Sensor for Park Lock Pressure, Component Information

B104 - Sensor for Transmission Output Speed, Component Information

B105 - Enable Pressure Sensor, Component Information

B110 - Cab Position Sensor, Component Information

B111 - Sensor for Hydraulic Oil Filter, Component Information

B112 - Brake Pedal Sensor Unit (PowrQuad™ Transmission), Component Information

B113 - Sensor for Brake Pedal Lock, Component Information

B125 - Ambient Air Temperature Sensor (at Front), Component Information

B126 - Ambient Air Temperature Sensor (at Rear), Component Information

B127 - Inside Air Temperature Sensor, Component Information

B128 - Sensor for Outlet Temperature, Component Information

B129 - Sensor for Evaporator Core Temperature, Component Information

B130 - Refrigerant Pressure Sensor, Component Information

B138 - Sensor for Steering Wheel Position, Component Information

B139 - Steering Angle Sensor, Component Information

B143 - Defog Sensor, Component Information

B145 - Microphone, Component Information

B167 - Sensor for Oil Pressure of Suspended Front-Wheel Drive Axle, Component Information

B172-1 - Sensor for Transmission Output Speed, Component Information

B176 - Fuel Level Sensor, Component Information

B188 - Sensor for Front Hitch Position, Component Information

B218 - Sensor for Position of Loader Boom, Component Information

B219 - Sensor for Position of Loader Bucket, Component Information

B223 - Sensor for Transmission Output Speed (DirectDrive Transmission), Component Information

B224 - Wheel Speed Sensor (Channel 1) (DirectDrive Transmission), Component Information

B225 - Wheel Speed Sensor (Channel 2) (DirectDrive Transmission), Component Information

B229 - Left Brake Pedal Sensor Unit (AutoPowr™/IVT™ Transmission or DirectDrive Transmission), Component Information

B230 - Right Brake Pedal Sensor Unit (AutoPowr™/IVT™ Transmission or DirectDrive Transmission), Component Information

B231 - Sensor for Air-Brake Pressure, Component Information

B238 - Sensor for Diagnostic Oil Pressure (DirectDrive Transmission), Component Information

B239 - Transmission Oil Pressure Sensor (DirectDrive Transmission), Component Information

B240 - Sensor for Oil Pressure of Reverse Brake (DirectDrive Transmission), Component Information

B241 - Sensor for Oil Pressure of Forward Clutch (DirectDrive Transmission), Component Information

B526 - Sensor for Diagnostic Oil Pressure, Component Information

B5009 - Coolant Level Service Switch, Component Information

B5010 - Coolant Level Service Switch, Component Information

B5101 - Sensor for Engine Oil Pressure, Component Information

B5102 - Exhaust Manifold Pressure Sensor, Component Information

B5103 - EGR Flow Sensor, Component Information

B5104 - Manifold Air Pressure Sensor, Component Information

B5105 - Crankcase Pressure Sensor, Component Information

B5107 - Pressure Sensor for Low-Pressure Fuel, Component Information

B5108 - Coolant Pressure Sensor, Component Information

B5109 - DPF Differential Pressure Sensor, Component Information

B5113 - Sensor for Fuel Rail Pressure, Component Information

B5204 - Exhaust Filter Temperature Module, Component Information

B5205 - Sensor for Outlet Temperature of Charge Air Cooler, Component Information

B5206 - Sensor for Manifold Air Temperature, Component Information

B5207 - EGR Temperature Sensor, Component Information

B5208 - Coolant Temperature Sensor, Component Information

B5209 - Fuel Temperature Sensor, Component Information

B5212 - SCR Temperature Module, Component Information

B5300 - Turbocharger Speed Sensor, Component Information

B5301 - Crankshaft Speed Sensor, Component Information

B5302 - Camshaft Speed Sensor, Component Information

B5500 - Intake air sensor, component information

B5502 - NOx Sensor at the Inlet of the Aftertreatment System, Component Information

B5503 - NOx Sensor at the Outlet of the Aftertreatment System, Component Information

B5504 - Engine Oil Level Sensor, Component Information

B5600 - Water-in-Fuel Sensor, Component Information

Y5501-1 - Fuel Pump (6175R to 6215R Tractors), Component Information

Group 40E: Electrical Components - Various Devices and Equipment

E003 - Left Clearance Light (ECE), Component Information

E004 - Right Clearance Light (ECE), Component Information

E007 - Left Headlight on Cab Frame, Component Information

E008 - Right Headlight on Cab Frame, Component Information

E009-L - Left Front Corner Worklight, Component Information

E009-R - Right Front Corner Worklight, Component Information

E015-L - Worklight on Rear of Left Fender, Component Information

E015-R - Worklight on Rear Fender (Right), Component Information

E021-L - License Plate Light (Left), Component Information

E021-R - License Plate Light (Right), Component Information

E035-L - Worklight (Left) on Cab Frame, Component Information

E035-R - Worklight (Right) on Cab Frame, Component Information

E068 - Left Tail Light, Component Information

E069 - Right Tail Light, Component Information

E074-L - Left Low-Beam Headlight, Component Information

E074-R - Right Low-Beam Headlight, Component Information

E075-L - Left High-Beam Headlight, Component Information

E075-R - Right High-Beam Headlight, Component Information

E076 - Left Dome Light, Component Information

E077 - Right Dome Light with Switch/Console Light, Component Information

E078-1L - Left Inner Worklight on Rear of Roof, Component Information

E078-1R - Inner Worklight on Rear of Roof (Right), Component Information

E078-2L - Left Outer Worklight on Rear of Roof, Component Information

E078-2R - Right Outer Worklight on Rear of Roof, Component Information

E078-3L - Side-Facing Worklight on Rear of Roof (Left), Component Information

E078-3R - Right Side-Facing Worklight on Rear of Roof, Component Information

E079-1L - Inner Worklight on Front of Roof (Left), Component Information

E079-1R - Right Inner Worklight on Front of Roof, Component Information

E079-2L - Left Outer Worklight on Front of Roof, Component Information

E079-2R - Right Outer Worklight on Front of Roof, Component Information

E079-3L - Middle Worklight on Front of Roof (Left), Component Information

E079-3R - Right Middle Worklight on Front of Roof, Component Information

H087-1 - Right Access Step Light, Component Information

H087-2 - Left Access Step Light, Component Information

Group 40F: Electrical Components - Fuses, Relays, and Diodes

F030 - Fuse for Electrical Starting Aid, Component Information

K046 - Relay for Electrical Starting Aid, Component Information

K060 - Relay for Socket of the CAN Bus (Implement) in Cab, Component Information

K061 - Fuses and Relays for Anti-Blocking System (ABS) of Trailer

K070 - Relay for Hydraulic Quick Release (Front Loader), Component Information

10/20 A Relay, Component Information

20/40 A Relay, Component Information

70 A Relay, Component Information

1/3 A Diode, Component Information

Connector for Come-Home Function, Component Information

Acoustic Alarm, Component Information

Group 40FA: Electrical Components - Fuses and Relays (PLB)

PLB - Fuses and Relays, Component Information

Connections

Overview of the Fuse and Relay Box (PLB)

PLB-01 - Relays (PLB), Component Information

PLB-02 - Fuses and Relays (PLB), Component Information

PLB-03 - Fuses (PLB), Component Information

PLB-04 - Fuses (PLB), Component Information

PLB-05 - Fuses and Relays (PLB), Component Information

PLB-06 - Fuses (PLB), Component Information

X697F - Connector for Battery Cut-Off Switch (Wiring Harness W201)

X744F - Connector for Implement Socket, Rear or Front (Wiring Harness W401 or W431)

X844F - Connector for Power Supply of the Electric Charge Air Cooler (Wiring Harness W551)

X845F - Connector for Front Loader and Premium Front Hitch (Wiring Harness W751)

X1061F - Connector for Engine Connecting Wiring Harness (Wiring Harness W511)

X1091F - Connector for Power Supply of the Cab Control Unit (Wiring Harness W002)

X1092F - Connector for Power Supply of the Control Unit for Range Shifting (DirectDrive Transmission) (Wiring Harness W006)

X1093F - Connector for Power Supply of Rear Chassis Control Unit (Wiring Harness W004)

X1094F - Connector for Power Supply of Roof Control Unit (Wiring Harness W003)

X1095F - Connector for Power Supply of Control Unit for Gear Shifting (DirectDrive Transmission) (Wiring Harness W005)

X1096F - Connector for Power Supply of Fuse and Relay Box (LCS) in Cab (Wiring Harness W201)

X1097F-A - Connector for Power Supply of Implement Socket, Front (Wiring Harness W431)

X1097F-B - Connector for Power Supply of Implement Socket, Rear (Wiring Harness W401)

X1108F - Connector for Transmission (Wiring Harness W601)

X1230 - Connection for Battery Plus Cable (Wiring Harness W_PWR01)

X1237 - Connection for Generator Cable (Wiring Harness W_PWR03)

X1238 - Connection for Starter Cable (Wiring Harness W_PWR02)

Group 40FB: Electrical Components - Fuses and Relays (LCS) with PowrQuad™ Transmission

LCS - Fuses, Relays, and Diodes with PowrQuad™ Transmission, Component Information

Summary of Fuse and Relay Box (LCS) with PowrQuad™ Transmission

LCS-01 - Fuses and Relays (LCS) with PowrQuad™ Transmission, Component Information

LCS-02 - Fuses and Relays (LCS) with PowrQuad™ Transmission, Component Information

LCS-03 - Fuses, Relays, and Diodes (LCS) with PowrQuad™ Transmission, Component Information

LCS-04 - Relays (LCS) with PowrQuad™ Transmission, Component Information

LCS-05 - Relays (LCS) with PowrQuad™ Transmission, Component Information

Group 40FC: Electrical Components - Fuses and Relays (LCS) with AutoPowr™/IVT™ Transmission

LCS - Fuses, Relays, and Diodes with AutoPowr™/IVT™ Transmission, Component Information

Summary of Fuse and Relay Box (LCS) with AutoPowr™/IVT™ Transmission

LCS-01 - Fuses and Relays (LCS) with AutoPowr™/IVT™ Transmission, Component Information

LCS-02 - Fuses and Relays (LCS) with AutoPowr™/IVT™ Transmission, Component Information

LCS-03 - Fuses, Relays, and Diodes (LCS) with AutoPowr™/IVT™ Transmission, Component Information

LCS-04 - Relays (LCS) with AutoPowr™/IVT™ Transmission, Component Information

LCS-05 - Relays (LCS) with AutoPowr™/IVT™ Transmission, Component Information

Group 40FD: Electrical Components - Fuses and Relays (LCS) with DirectDrive Transmission

LCS - Fuses, Relays, and Diodes with DirectDrive Transmission, Component Information

Summary of Fuse and Relay Box (LCS) with DirectDrive Transmission

LCS-01 - Fuses and Relays (LCS) with DirectDrive Transmission, Component Information

LCS-02 - Fuses and Relays (LCS) with DirectDrive Transmission, Component Information

LCS-03 - Fuses, Relays, and Diodes (LCS) with DirectDrive Transmission, Component Information

LCS-04 - Relays (LCS) with DirectDrive Transmission, Component Information

LCS-05 - Relays (LCS) with DirectDrive Transmission, Component Information

Group 40G: Electrical Components - Power Supply and Alternator

G001 - Battery, Component Information

G004 - Alternator, Component Information

Group 40H: Electrical Components - Monitoring and Signaling Devices

E027-L - Left Beacon Light, Component Information

E027-R - Right Beacon Light, Component Information

E070 - Rear Turn-Signal Light (Left), Component Information

E071 - Rear Turn-Signal Light (Right), Component Information

E072 - Brake Light (Left), Component Information

E073 - Brake Light (Right), Component Information

H001 - Horn, Component Information

H034 - Left Front Turn-Signal Light (ECE), Component Information

H042 - Right Front Turn-Signal Light (ECE), Component Information

H044 - Left Front Turn-Signal Light in Roof (SAE), Component Information

H045 - Right Front Turn-Signal Light in Roof (SAE), Component Information

H046 - Rear Turn Signal Light (Left) in Roof (SAE), Component Information

H047 - Right Turn-Signal Light on Rear of Roof (SAE), Component Information

H067 - Backup Alarm, Component Information

H090 - Extra-Wide Vehicle Turn Signal Light (Right) (SAE), Component Information

H091 - Extra-Wide Vehicle Turn Signal Light (Left) (SAE), Component Information

H092 - Warning Lights for Extra-Wide Vehicle (Right) (ECE), Component Information

H093 - Warning Lights for Extra-Wide Vehicle (Left) (ECE), Component Information

Group 40M: Electrical Components - Electrical Motors

A036 - E-SCV I Stepper Motor, Component Information

A037 - E-SCV II Stepper Motor, Component Information

A038 - E-SCV III Stepper Motor, Component Information

A039 - E-SCV IV Stepper Motor, Component Information

A040 - E-SCV V Stepper Motor, Component Information

A041 - E-SCV VI Stepper Motor, Component Information

B131 - Heater Valve, Component Information

B132 - Actuator for Air Distribution, Component Information

M001 - Starting Motor, Component Information

M005 - Windshield Washer Pump, Component Information

M006 - Rear Window Washer Pump, Component Information

M009 - Pressurizer Fan Motor for Pressure Inside Cab, Component Information

M012 - E-SCV XI Stepper Motor, Component Information

M013 - E-SCV XII Stepper Motor, Component Information

M014 - E-ICV XIII Stepper Motor, Component Information

M015 - Stepper Motor for Front Hitch, Component Information

M019 - Outside Mirror (Left), Adjusted and Heated Electrically, Component Information

M020 - Heated Electric Outside Mirror (Right), Component Information

M031 - Fuel Pump (Engines under 175 hp / 130 KW), Component Information

M039 - Windshield Wiper Motor (in Cab Roof), Component Information

M040 - Rear Window Wiper Motor, Component Information

M041 - Windshield Wiper Motor (with Panorama Cab), Component Information

M042 - Circulation Blower Motor, Component Information

M045 - Stepper Motor for Rear Hitch, Component Information

Y137 - Electric Motor of the Charge Air Cooler, Component Information

Y5400 - Actuator for EGR Valve, Component Information

Y5401 - Air Throttle Actuator, Component Information

Y5402 - Exhaust Throttle Actuator, Component Information

Y5500 - VGT Actuator, Component Information

Group 40R: Electrical Components - Resistors

A131 - CAN Bus Terminating Resistor (Engine CAN Bus), Component Information

A149 - CAN Bus Terminating Resistor (Engine CAN Bus), Component Information

E5601 - Pressure Line Heater of the DEF Dosing Unit, Component Information

E5602 - Return Line Heater of the DEF Dosing Unit, Component Information

E5603 - Supply Line Heater of the DEF Dosing Unit, Component Information

R002 - Heating Element of Fuel Preheater, Component Information

R017 - Heated Rear Window, Component Information

R020 - CAN Bus Terminating Resistor (Vehicle CAN Bus), Component Information

R022 - CAN Bus Terminating Resistor (E-SCV CAN Bus), Component Information

R036 - Heating Element for Electrical Starting Aid, Component Information

R037 - Resistor for Monitoring the Heating Element of the Electrical Starting Aid, Component Information

R040 - CAN Bus Terminating Resistor (Transmission CAN Bus (1000 kBd)), Component Information

Group 40S: Electrical Components - Switches

S4 - Transmission Oil Filter Pressure Switch (AutoPowr™/IVT™ Transmission), Component Information

S9 - Pressure Switch for Filter Bypass Valve (AutoPowr™/IVT™ Transmission), Component Information

S006 - Front PTO Switch, Component Information

S012 - Key Switch, Component Information

S021 - Rear PTO Switch, Component Information

S023 - Right Remote Control Switch for Rear Hitch, Component Information

S040 - Operator Presence Switch, Component Information

S044 - Left Remote Control Switch for Rear PTO, Component Information

S068 - Left Remote Control Switch for Rear Hitch, Component Information

S078 - Front PTO Switch (CommandARM™), Component Information

S079 - Rear PTO Switch (CommandARM™), Component Information

S091 - Control Lever for E-SCV I, Component Information

S097 - E-SCV II Control Lever, Component Information

S098 - Control Lever for E-SCV III, Component Information

S099 - Control Lever for E-SCV IV, Component Information

S103 - Mirror Heater Switch, Component Information

S114 - Park Lock Switch, Component Information

S121 - Right Remote Control Switch for Rear PTO, Component Information

S124 - Switch for Electro-Hydraulic Pick-Up Hitch (E-PUH), Component Information

S125 - Gear Selector Switch, Component Information

S127 - Turn-Signal Lever, Component Information

S128 - Switch for Windshield and Rear Window Wipers, Component Information

S134 - E-SCV Remote Control Switch (Left), Component Information

S137 - Light Switch, Component Information

S144 - Pressure Switch for Trailer Air Brakes, Component Information

S152 - E-SCV Remote Control Switch (Right), Component Information

S158 - Switch for Gear Selector, Auto Mode and Clutch, Component Information

S171 - Mechanical Multi-Function Lever (DURA), Component Information

S174 - Remote Control Switch of Front Hitch, Component Information

S181 - Mirror Adjuster Switch, Component Information

S185 - Mirror-Arm Adjustment Switch, Component Information

S186-LH - Left Switch for Dome Lights, Component Information

S186-RH - Right Switch for Dome Lights, Component Information

S188 - Rear Window Wiper Shut-Off Switch, Component Information

S200 - Center Remote Control Switch for Hitch, Component Information

S205 - Switch for Hydraulic Quick Release (Front Loader), Component Information

S206 - Switch for Dampening (Front Loader), Component Information

S208 - Switch for Front Loader Worklights, Component Information

Group 40W: Wiring Harnesses

General Information

W002/1: Wiring Harness for Power Supply of Cab Control Unit

W003/1: Wiring Harness for Power Supply of Roof Control Unit

W004/1: Wiring Harness for Power Supply of Rear Chassis Control Unit with ABS (PowrQuad™ Transmission)

W004/2: Wiring Harness for Power Supply of Rear Chassis Control Unit with ABS (AutoPowr™/IVT™ Transmission)

W004/3: Wiring Harness for Power Supply of Rear Chassis Control Unit with ABS (DirectDrive Transmission)

W004/4: Wiring Harness for Power Supply of Rear Chassis Control Unit (PowrQuad™ or AutoPowr™/IVT™ Transmission)

W004/5: Wiring Harness for Power Supply of Rear Chassis Control Unit (DirectDrive Transmission)

W005/1: Wiring Harness for Power Supply of Control Unit for Gear Shifting (DirectDrive Transmission)

W006/1: Wiring Harness for Power Supply of Control Unit for Range Shifting (DirectDrive Transmission)

W021/1: Wiring Harness for 3-Terminal Power Outlet Socket (ECE)

W021/2: Wiring Harness for 3-Pin Socket (SAE)

W022/1: Wiring Harness for 3-Terminal Power Outlet Socket (Adapter)

W023/1: Wiring Harness for 3-Terminal Power Outlet Socket (Power Strip)

W031/1: Wiring Harness for 7-Pin Socket (ECE) at Rear

W031/2: Wiring Harness for 7-Pin Socket (SAE)

W032/1: Wiring Harness for 7-Pin Socket (ECE) at Front

W033/1: Wiring Harness for 7-Terminal Socket (ECE) at Front (Adapter) (6135R to 6215R Tractors)

W033/2: Wiring Harness for 7-Terminal Socket (ECE) at Front (Adapter) (6110R to 6130R Tractors)

W041/1: Wiring Harness for Signal Socket

W101/1: Hood Wiring Harness (6-Cylinder Engines)

W101/2: Hood Wiring Harness (4-Cylinder Engines)

W102/1: Hood Wiring Harness (Adapter) (4-Cylinder Engines)

W111/1: Wiring Harness for Lights on Cab Frame

W121/1: Wiring Harness for Inner Flood Lights on Front of Roof or Outer Flood Lights on Rear of Roof

W122/1: Wiring Harness for Outer Flood Lights on Front of Roof

W131/1: Wiring Harness for Turn-Signal Lights on Roof (SAE)

W141/1: Beacon Light Harness

W151/1: Wiring Harness for Warning Lights for Extra-Wide Vehicle (ECE)

W151/2: Wiring Harness for Extra-Wide Vehicle Turn-Signal Lights (SAE)

W152/1: Wiring Harness for Extra-Wide Vehicle Turn-Signal Lights (SAE) (Adapter)

W161/1: Wiring Harness for Access Step Light

W201/1: Cab Wiring Harness (PowrQuad™ Transmission)

W201/2: Cab Wiring Harness (AutoPowr™/IVT™ and DirectDrive Transmission)

W211/1: Cowl Wiring Harness (PowrQuad™ Transmission)

W211/2: Cowl Wiring Harness (AutoPowr™/IVT™ Transmission)

W211/3: Cowl Wiring Harness (DirectDrive Transmission)

W221/1: Cab Roof Wiring Harness

W231/1: Instrument Carrier Wiring Harness

W241/1: Wiring Harness for Clutch Pedal Sensor Unit

W251/1: Wiring Harness for Shift Unit (PowrQuad™ Transmission)

W251/2: Harness for CommandArm™

W252/1: Wiring Harness for Shift Console (PowrQuad™ Transmission)

W253/1: Monitor Wiring Harness (PowrQuad™ Transmission)

W253/2: Harness for CommandArm™ (Monitor)

W254/1: Harness for E-SCV Control Elements (PowrQuad™ Transmission)

W261/1: Wiring Harness for Recirculation Fan

W271/1: Wiring Harness for Windshield Wiper Motor (Cab Roof)

W271/2: Wiring Harness for Windshield Wiper Motor (with Panorama Cab)

W281/1: Left Fender Wiring Harness

W282/1: Right Fender Wiring Harness

W283/1: Right Fender Wiring Harness (Remote Control Switch for Hitch, Center)

W284/1: Left Fender Wiring Harness (Remote Control Switch for Hitch, Center)

W291/1: Wiring Harness for Front Chassis Control Unit (M400) (6145R - 6215R Tractors)

W291/2: Wiring Harness for Front Chassis Control Unit (M400) (6110R - 6135R Tractors)

W291/3: Wiring Harness for Front Chassis Control Unit (M50) (6145R - 6215R Tractors)

W291/4: Wiring Harness for Front Chassis Control Unit (M50) (6110R - 6135R Tractors)

W401/1: Wiring Harness for Rear Implement Socket

W401/2: Wiring Harness for without Rear Implement Socket

W411/1: Harness for GreenStar™ (Cab)

W411/2: Harness for without GreenStar™ (Cab)

W421/1: GreenStar™ Wiring Harness (Cab Roof)

W421/2: Harness for without GreenStar™ (Cab Roof)

W431/1: Harness for Implement Socket, Front (Connecting Wiring Harness) (6135R to 6215R Tractors)

W431/2: Harness for Implement Socket, Front (Connecting Wiring Harness) (6110R to 6130R Tractors)

W432/1: Harness for Implement Socket, Front (Socket)

W433/1: Harness for Implement Socket, Front (Adapter)

W451/1: AutoTrac™ Wiring Harness (Cab)

W461/1: AutoTrac™ Wiring Harness (Sensor for Steering Wheel Position)

W471/1: AutoTrac™ Wiring Harness (Wheel Angle Sensor) (6135R to 6215R Tractors)

W471/2: AutoTrac™ Wiring Harness (Wheel Angle Sensor) (6110R to 6130R Tractors)

W501/2: Harness for Engine (Main Harness) (6-Cylinder/Single Turbo) (6175R to 6215R Tractors)

W501/3: Wiring Harness for Engine (Main Harness) (6-Cylinder/Single Turbo) (6145R to 6155R Tractors)

W501/4: Harness for Engine (Main Harness) (4-Cylinder/Dual Turbo) (6135R Tractor)

W501/5: Harness for Engine (Main Harness) (4-Cylinder/Dual Turbo) (6110R to 6130R Tractors)

W511/2: Engine Wiring Harness (Connecting Wiring Harness) (6175R to 6215R Tractors)

W511/3: Engine Wiring Harness (Connecting Wiring Harness) (6135R to 6155R Tractors)

W511/4: Engine Wiring Harness (Connecting Wiring Harness) (6110R to 6130R Tractors)

W521/1: Engine Wiring Harness (Coolant Level, Fuel Pump) (6175R to 6215R Tractors)

W521/2: Engine Wiring Harness (Coolant Level) (6145R to 6155R Tractors)

W521/3: Engine Wiring Harness (Coolant Level) (6110R to 6135R Tractors)

W522/1: Engine Wiring Harness (Adapter for Fuel Pump)

W531/1: Engine Wiring Harness (Exhaust System DPF) (6175R to 6215R Tractors)

W531/2: Engine Wiring Harness (Exhaust System DPF) (6135R to 6155R Tractors)

W531/3: Engine Wiring Harness (Exhaust System DPF) (6110R to 6130R Tractors)

W541/1: Wiring Harness for Engine (Exhaust System, SCR)

W542/1: Harness for DEF Tank

W543/1: Wiring Harness for DEF Tank (Adapter)

W551/1: Engine Wiring Harness (Charge Air Cooler - Hydraulic) (6155R Tractors)

W551/2: Engine Wiring Harness (Charge Air Cooler - Electric) (6145R Tractors)

W561/1: Engine Wiring Harness (Adapter for Sensors) (4-Cylinder Engines)

W571/1: Engine Wiring Harness (Electrical Starting Aid) (4-Cylinder Engines)

W601/1: Transmission Wiring Harness (PowrQuad™ Transmission) (6145R to 6215R Tractors)

W601/2: Transmission Wiring Harness (AutoPowr™/IVT™ Transmission) (6145R to 6215R Tractors)

W601/3: Transmission Wiring Harness (DirectDrive Transmission) (6145R to 6215R Tractors)

W601/4: Transmission Wiring Harness (PowrQuad™ Transmission) (6110R to 6135R Tractors)

W601/5: Transmission Wiring Harness (AutoPowr™/IVT™ Transmission) (6110R to 6135R Tractors)

W602/1: Transmission Wiring Harness (AutoPowr™/IVT™ Transmission) (ZF Wiring Harness)

W611/1: Wiring Harness for Power-Assisted Rear PTO Shifting (PAPTOS) (Connecting Wiring Harness) (6110R to 6135R Tractors)

W621/1: Draft Sensor Wiring Harness (Adapter)

W631/1: Transmission Wiring Harness (Radar Sensor Adapter)

W701/1: Wiring Harness for Suspended Front-Wheel Drive Axle

W711/1: Wiring Harness for Cab Suspension and Hydraulic Draft Link Stabilizer Bars (HSB)

W721/1: Harness for E-SCV I to E-SCV VI Stepper Motors

W731/1: Harness for E-SCV X to E-SCV XIII Stepper Motors

W741/1: Wiring Harness for Front PTO

W751/1: Wiring Harness for Front Hitch/Front Loader with Return-to-Position Function (Connecting Wiring Harness) (6135R to 6215R Tractors)

W751/2: Wiring Harness for Front Hitch/Front Loader with Return-to-Position Function (Connecting Wiring Harness) (6110R to 6130R Tractors)

W751/3: Wiring Harness for Front Hitch/Front Loader with Control Unit at Front Loader (Connecting Wiring Harness) (6135R to 6215R Tractors)

W751/4: Wiring Harness for Front Hitch/Front Loader with Control Unit at Front Loader (Connecting Wiring Harness) (6110R to 6130R Tractors)

W752/1: Wiring Harness for Front Hitch (3-Terminal Power Outlet Socket)

W761/1: Wiring Harness for Electro-hydraulic Pick-up Hitch (E-PUH) (Cab)

W762/1: Wiring Harness for Electro-hydraulic Pick-up Hitch (E-PUH) (Valves)

W771/1: Wiring Harness for Air Brake

W801/1: Wiring Harness for Radio (with CAN Bus)

W802/1: Wiring Harness for Radio (ECE, without CAN Bus) (Voltage Supply)

W802/2: Wiring Harness for Radio (SAE, without CAN Bus) (Voltage Supply)

W811/1: Wiring Harness for Electrical Outside Mirrors

W821/1: Wiring Harness for JDLink

W831/1: Wiring Harness for Power Supply of Ethernet Switch and John Deere Machine Sync (MCR)

W831/1: Wiring Harness for Power Supply of Ethernet Switch and John Deere Machine Sync (MCR) (from CIU End 2017)

W832/1: Wiring Harness for Power Supply of Ethernet Switch (Adapter)

W833/1: Wiring Harness for Power Supply of Ethernet Switch and John Deere Machine Sync (MCR) (Adapter)

W851/1: Wiring Harness for Video Camera 1 and 2 (Processor 4600)

W852/1: Wiring Harness for Video Camera (Socket)

W861/1: Wiring Harness for the Anti-Blocking System (ABS) of Trailer (PowrQuad™ Transmission and AutoPowr™/IVT™ Transmission)

W861/2: Wiring Harness for the Anti-Blocking System (ABS) of Trailer (DirectDrive Transmission)

W862/1: Wiring Harness for the Anti-Blocking System (ABS) of Trailer (Socket)

W901/1: Wiring Harness for Front Loader (DURA)

W911/1: Wiring Harness for Front Loader (Cab)

W912/1: Wiring Harness for Front Loader (Multi-Coupler)

W913/1: Wiring Harness for Front Loader (Loader Boom)

W914/1: Wiring Harness for Front Loader (Loader Lights)

W915/1: Wiring Harness for Front Loader (Hydraulic Implement Unlatching HIU)

W921/1: Wiring Harness for RTP (Adapter)

W921/2: Wiring Harness for RTP with Control Unit at Front Loader (Adapter)

W922/1: Wiring Harness for RTP (Loader Boom)

W922/2: Wiring Harness for RTP with Control Unit at Front Loader (Loader Boom)

Group 40WA: Wiring Harnesses - Battery Cables

General Information

W_PWR01/1: Battery Plus Cable (6135R to 6215R Tractors)

W_PWR01/2: Battery Plus Cable (6110R to 6130R Tractors)

W_PWR01/3: Battery Plus Cable (110AH Battery) (6110R to 6135R Tractors)

W_PWR02/1: Starter Cable (6145R to 6215R Tractors)

W_PWR02/2: Starter Cable (6135R Tractors)

W_PWR02/3: Starter Cable (6110R to 6130R Tractors)

W_PWR03/1: Generator Cable (6135R to 6215R Tractors)

W_PWR03/2: Generator Cable (6110R to 6130R Tractors)

W_GND01/1: Battery Ground Cable (6135R to 6215R Tractors)

W_GND01/2: Battery Ground Cable (6110R to 6130R Tractors)

W_GND01/3: Battery Ground Cable (110AH Battery) (6110R to 6130R Tractors)

W_GND01/4: Battery Ground Cable (110AH Battery) (6135R Tractors)

W_GND02/1: Ground Cable, Engine to Frame (6145R to 6215R Tractors)

W_GND02/2: Ground Cable, Engine to Frame (6110R to 6135R Tractors)

W_GND03/1: Ground Cable, Cab to Frame

Group 40WB: Wiring Harnesses - Antennas, Ethernet, Monitor, USB

General Information

W_ANT01/1: Antenna Cable from Antenna Base to John Deere Machine Sync with Filter

W_ANT01/2: Antenna Cable from Antenna Base to John Deere Machine Sync without Filter

W_ETH01/1: Ethernet Cable from Processor 4600 to Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote)

W_ETH01/1: Ethernet Cable from Processor 4600 to Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote) (4G) (from CIU End 2017)

W_ETH01/2: Ethernet Cable from Processor 4600 to Ethernet Network Splitter

W_ETH01/2: Ethernet Cable from Processor 4600 to Ethernet Network Splitter (from CIU End 2017)

W_ETH02/1: Ethernet Cable from Ethernet Network Splitter to Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote)

W_ETH02/1: Ethernet Cable from Ethernet Network Splitter to Control Unit for Telematics (JDLink™/Service ADVISOR™ Remote) (4G) (from CIU End 2017)

W_ETH03/1: Ethernet Cable from Ethernet Network Splitter to Control Unit for John Deere Machine Sync

W_ETH03/1: Ethernet Cable from Ethernet Network Splitter to Control Unit for John Deere Machine Sync (from CIU End 2017)

W_ETH04/1: Ethernet Cable from Ethernet Network Splitter to Connection Point (C-Post)

W_ETH04/1: Ethernet Cable from Ethernet Network Splitter to Connection Point (C-Post) (from CIU End 2017)

W_ETH05/1: Ethernet Cable from Ethernet Network Splitter to Connection Point (A-Post)

W_ETH05/1: Ethernet Cable from Ethernet Network Splitter to Connection Point (A-Post) (from CIU End 2017)

W_ETH06/1: Ethernet Cable from Connection Point (C-Post) to Connection Point for External Monitor (C-Post)

W_ITC01/1: Wiring Harness for StarFire™ ITC Receiver (Adapter)

W_MON01/1: Ethernet Cable from Processor 4600 to Connection for External Display (C-Post)

W_MON02/1: Monitor Cable for GreenStar™ Display (A-Post)

W_MON02/2: Monitor Cable for GreenStar™ Display (C-Post)

W_MON03/1: Monitor Cable for External Monitor (A-Post)

W_MON03/2: Monitor Cable for External Monitor (C-Post)

W_USB01/1: USB Cable for USB Interface to Radio

W_USB02/1: USB Cable for USB Service Connection to Processor 4100 or 4600

Group 40X: Electrical Components - Connectors

X002 - Connection Point between Harnesses W291 and W741

X003-3 - Connector for Gear-Selector Switch and Auto Mode, or Connection Point between Wiring Harnesses W251 and W901

X030 - Connection Point between Harnesses W601 and W631

X034 - Connection Point between Harnesses W282 and W283

X035 - Connection Point between Harnesses W281 and W284

X037 - Connector for Accessories (Lead 0362)

X037 - Connector for Accessories (Lead 0372)

X055 - Adapter Connector for Wake-Up Voltage of Cab Control Unit

X077 - Connection Point between Wiring Harnesses W501 and W543

X179 - Connection Point between Harnesses W221 and W421

X179-2 - Connection Point between Wiring Harnesses W221 and W421 (without GreenStar™)

X180 - Connection Point between Harnesses W421 and W821

X193 - Connection Point between Harnesses W201 and W251

X218 - Connection Point between Wiring Harnesses W601 and W602 (ZF Wiring Harness)

X234 - Connection Point between Harnesses W032 and W033

X240 - Connection Point between Harnesses W251 and W253

X244 - Connection Point between Harnesses W253 and W201

X305F - Connector for Radiator Ground Connection

X306 - Connection Point between Wiring Harnesses W921 and W922

X312 - Connection Point between Harnesses W901 and W912

X322 - Connection Point between Harnesses W211 and W241

X358 - Connection Point between Harnesses W411 and W421

X422 - Connection Point between Harnesses W201 and W252

X423 - Connection Point between Harnesses W901 and W912

X428 - Connection Point between Harnesses W201 and W254

X433 - Connection Point between Harnesses W221 and W121 (ECE Version) or W131 (SAE Version)

X442 - Connection Point between Harnesses W221 and W111

X443 - Connection Point between Harnesses W221 and W111

X445 - Connection Point between Harnesses W911 and W912

X455F - Connector of Memo™ Function

X462 - Connection Point between Harnesses W601 and W721

X475 - Connection Point between Harnesses W221 and W122 (ECE Version) or W131 (SAE Version) or W152 (SAE Version)

X475-2 - Connection Point between Wiring Harnesses W152 (SAE Version) and W131 (SAE Version)

XL483 - Connection Point between Wiring Harnesses W913 and W914

X535 - Connection Point between Harnesses W201 and W411

X535-2 - Connection Point between Harnesses W201 and W411

X543 - Connection Point between Harnesses W601 and W401

X543-2 - Connection Point between Harnesses W601 and W401

X565-1 - Connection Point between Wiring Harnesses W_ITC01 and W421

X574F - Connector for Implement Switch

X575 - Connection Point between Wiring Harnesses W501 and W522

X591 - Adapter Connector for Implement CAN Bus

X607 - Connection Point between Harnesses W201 and W161

X637 - Connection Point between Harnesses W451 and W511

X637-1 - Connection Point between Harnesses W511 and W471

X637-2 - Connection Point between Wiring Harnesses W601 and W511

X641 - Connection Point between Harnesses W201 and W451

X644 - Connection Point between Harnesses W761 and W762

X689F - Connector for Power Supply to External Display

X735 - Connection Point between Harnesses W211 and W231

X744 - Connection Point between Wiring Harnesses W401 and W431

X761 - Connection Point between Harnesses W201 and W251

X780 - Connection Point between Wiring Harnesses W201 and W211

X781 - Connection Point between Harnesses W201 and W221

X805 - Connection Point between Harnesses W421 and W433

X805-1 - Connection Point between Harnesses W433 and W431

X811 - Connection Point between Wiring Harnesses W913 and W912

X818 - Connection Point between Harnesses W201 and W261

X837 - Connection Point between Harnesses W451 and W461

X865 - Connection Point between Harnesses W431 and W432

X867 - Connection Point between Harnesses W431 and W432

X880 - Connection Point between Harnesses W201 and W041

X906 - Connection Point on Wiring Harness W201 for Displayed Speed on GreenStar™ Display

X921 - Connection Point between Harnesses W291 and W751

X923 - Connection Point between Harnesses W751 and W752

X930 - Connection Point between Harnesses W411 and W421

X978-1 - Connection Point between Wiring Harnesses W_ETH04 and W_ETH06

X990 - Connection Point between Wiring Harnesses W601 and W711

X992 - Connection Point between Harnesses W201 and W601

X1002 - Connection Point between Harnesses W411 and W421

X1003 - Connection Point between Harnesses W201 and W281

X1004 - Connection Point between Harnesses W201 and W282

X1005 - Connection Point between Harnesses W601 and W511

X1018 - Connection Point between Harnesses W291 and W511

X1051 - Connection Point between Harnesses W501 and W571

X1053 - Connection Point between Harnesses W501 and W531

X1070 - Connection Point between Harnesses W551 and W511

X1078 - Connection Point between Harnesses W511 and W521

X1079 - Connection Point between Harnesses W501 and W521

X1080 - Connection Point between Harnesses W501 and W511

X1083 - Connection Point between Harnesses W291 and W701

X1087 - Connection Point between Harnesses W281 and W151

X1089 - Connection Point between Harnesses W282 and W151

X1098 - Connection Point between Harnesses W201 and W411

X1099 - Connection Point between Harnesses W221 and W821

X1109 - Connection Point between Harnesses W221 and W121

X1112 - Connection Point between Harnesses W221 and W141

X1113 - Connection Point between Harnesses W221 and W141

X1120 - Connection Point between Harnesses W201 and W511

X1134 - Connection Point between Harnesses W751 and W731

X1136 - Voltage Supply of Electrical Starting Aid

X1157 - Connection Point between Harnesses W601 and W771

X1158-1 - Connection Point between Wiring Harnesses W201 and W851 or W852

X1158-2 - Connection Point between Harnesses W851 and W852

X1168 - Connection Point between Harnesses W291 and W751

X1169 - Connection Point between Wiring Harnesses W751 and W921

X1169-1 - Connection Point between Wiring Harnesses W751 and W921

X1170 - Connection Point between Harnesses W921 and W922

X1187 - Connection Point between Harnesses W221 and W271

X1190 - Connection Point between Harnesses W221 and W801 or W802

X1210 - Connection Point between Harnesses W221 and W811

X1215 - Connection Point between Harnesses W831 and W832

X1216 - Connection Point between Wiring Harnesses W221 and W831 or W821

X1216-2 - Connection Point between Harnesses W831 and W821

X1217 - Connection Point between Harnesses W831 and W833

X1233 - Connection Point between Wiring Harnesses W511 and W101 or W102

X1233-2 - Connection Point between Harnesses W102 and W101

X1235 - Connection Point between Wiring Harnesses W601 and W031 to W033 or W861

X1235-1 - Connection Point between Wiring Harnesses W033 and W031

X1235-2 - Connection Point between Wiring Harnesses W861 and W031 or W033

X1251 - Connection Point between Harnesses W531 and W541

X1253 - Connection Point between Harnesses W501 and W542

X1268 - Connection Point between Harnesses W751 and W912

X1269M (XLIM-1) - Connector for Control Unit for the 3rd Function at the Front Loader (Open)

X1270M (XLIM-2) - Connector for Control Unit for the 3rd Function at the Front Loader (Close)

X1278 - Connection Point between Harnesses W751 and W912

X1308 - Connection Point between Harnesses W201 and W021

X1308-1 - Connection Point between Harnesses W201 and W021

X1308-2 - Connection Point between Wiring Harnesses W201 and W021 or W022

X1308-3 - Connection Point between Harnesses W022 and W021

X1308-4 - Connection Point between Harnesses W022 and W023

X1309 - Connection Point between Wiring Harnesses W601 and W621

X1309-1 - Connection Point between Wiring Harnesses W601 and W621

X1313 - Connection Point between Harnesses W151 and W152

X1327 - Connection Point between Harnesses W601 and W611

X1329 - Connection Point between Harnesses W861 and W862

XL4416 - Connection Point between Wiring Harnesses W913 and W915

X5040 - Connection Point between Harnesses W501 and W561

Group 40XG: Ground Points

G001_NEG - Ground Point

XGND1A - Ground Point

XGND5A - Ground Point

XGND9 - Ground Point

XGND9C - Ground Point

XGND10 - Ground Point

XGND16 - Ground Point

XGND17 - Ground Point

XGND40 - Ground Point

XGND43A - Ground Point

XGND51 - Ground Point

XGND52 - Ground Point

XGND53 - Ground Point

XGND55 - Ground Point

XGND60 - Ground Point

XGND64 - Ground Point

XGND65A - Ground Point

XGND72 - Ground Point

XGND73 - Ground Point

XGND74 - Ground Point

XGND74-1 - Ground Point

XGND_DPT1 - Ground Point

XGND_DPT2 - Ground Point

Group 40Y: Electrical Components - Solenoid Valves and Solenoids

BG - Disk Brake Solenoid Valve (AutoPowr™/IVT™ Transmission), Component Information

KR - Proportional Solenoid Valve for Reverse Clutch (AutoPowr™/IVT™ Transmission), Component Information

KV - Proportional Solenoid Valve for Forward Clutch (AutoPowr™/IVT™ Transmission), Component Information

K1 - Clutch 1 Solenoid Valve (AutoPowr™/IVT™ Transmission), Component Information

K2 - Clutch 2 Solenoid Valve (AutoPowr™/IVT™ Transmission), Component Information

K3 - Clutch 3 Solenoid Valve (AutoPowr™/IVT™ Transmission), Component Information

K4 - Clutch 4 Solenoid Valve (AutoPowr™/IVT™ Transmission), Component Information

M002 - A/C Compressor Clutch System, Component Information

X5021 - Injection Valves for 6-Cylinder Engines, Component Information

Y1 - Proportional Solenoid Valve 1 for Hydrostatic Unit (AutoPowr™/IVT™ Transmission), Component Information

Y2 - Proportional Solenoid Valve 2 for Hydrostatic Unit (AutoPowr™/IVT™ Transmission), Component Information

Y5 - Park Lock Solenoid Valve 1 (AutoPowr™ Transmission / IVT™ Transmission), Component Information

Y003 - Front-Wheel Drive Solenoid Valve, Component Information

Y005 - Differential Lock Solenoid Valve, Component Information

Y009 - Viscous Fan Drive (Electrical), Component Information

Y015 - Park Lock Solenoids (DirectDrive Transmission), Component Information

Y016-2 - Park Lock Solenoid Valve 2 (AutoPowr™ Transmission / IVT™ Transmission), Component Information

Y033 - Forward Solenoid Valve, Component Information

Y036 - Reverse Solenoid Valve, Component Information

Y038 - Proportional Solenoid Valve for Transmission Enable, Component Information

Y039 - Solenoid Valve K2 for Gear Shifting, Component Information

Y040 - Solenoid Valve K1 for Gear Shifting, Component Information

Y042 - Solenoid Valve for Lowering Cab Suspension, Component Information

Y043 - Solenoid Valve for Raising Cab Suspension, Component Information

Y047 - Injection Valves for 4-Cylinder Engines, Component Information

Y066 - Solenoid Valve for Lowering the Suspended Front-Wheel Drive Axle, Component Information

Y067 - Solenoid Valve for Raising the Suspended Front-Wheel Drive Axle, Component Information

Y068 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Reduction, Component Information

Y069 - Solenoid Valve for Suspended Front-Wheel Drive Axle Pressure Build-Up, Component Information

Y071 - Solenoid Valve for Draft Link Stabilizer (Float Position) (HSB), Component Information

Y072 - Solenoid Valve for Draft Link Stabilizer (No-Float Position) (HSB), Component Information

Y073 - Solenoid for PTO Speed 2 (PAPTOS), Component Information

Y074 - Solenoid for PTO Speed 1 (PAPTOS), Component Information

Y075 - Solenoid for PTO Speed 3 (PAPTOS), Component Information

Y081 - Proportional Solenoid Valve for Power-Assisted Rear PTO Shifting (PAPTOS), Component Information

Y094 - Proportional Solenoid Valve for Front PTO, Component Information

Y098-1 - Proportional Solenoid Valve for Clutch for Side Shaft 1 (DirectDrive Transmission), Component Information

Y098-2 - Proportional Solenoid Valve for Clutch for Side Shaft 2 (DirectDrive Transmission), Component Information

Y101 - Commutation Valve for Front Hitch (Rerouting the Oil from Coupler XIV to Coupler XV, Component Information

Y102 - Commutation Valve of Front Hitch (Switchover of Lift Cylinder, Single- or Double-Acting), Component Information

Y103 - Proportional Solenoid Valve for Cab Suspension, Component Information

Y107 - Proportional Solenoid Valve for Hydraulic Motor of Charge Air Cooler, Component Information

Y108-1/3/5/7 - Solenoids for Gears on Side Shaft 1 (DirectDrive Transmission), Component Information

Y108-2/4/6/8 - Solenoids for Gears on Side Shaft 2 (DirectDrive Transmission), Component Information

Y109-1/2 - Solenoids for Ranges A/B (DirectDrive Transmission), Component Information

Y110 - Proportional Solenoid Valve for Forward Clutch (DirectDrive Transmission), Component Information

Y111 - Proportional Solenoid Valve for Reverse Brake (DirectDrive Transmission), Component Information

Y112-1 - Range C Solenoid (DirectDrive Transmission), Component Information

Y113-1/2/3 - Solenoids for PTO Speed (PAPTOS) (DirectDrive Transmission), Component Information

Y114-1 - Solenoid Valve for Steering Control Valve (Enable Valve) (AutoTrac™), Component Information

Y114-2 - Solenoid Valve for Steering Control Valve (Left Turn) (AutoTrac™), Component Information

Y114-3 - Solenoid Valve for Steering Control Valve (Right Turn) (AutoTrac™), Component Information

Y115 - Solenoid Valve for Hydraulic Trailer Brake, Component Information

Y117 - Solenoid Valve for Air Trailer Brake, Component Information

Y126 - Solenoid Valve for Electro-Hydraulic Pick-Up Hitch (E-PUH), Component Information

Y5002 - Suction Control Valve, Component Information

Y5005 - Compressor Clutch for Air Trailer Brake, Component Information

Y5019 - Coolant Control Valve for DEF Tank, Component Information

Y5020 - Solenoid Valve for DEF Injection, Component Information

Y5022-2 - Control Valve 1 for Fuel Pressure, Component Information

Y5023-2 - Control Valve 2 for Fuel Pressure, Component Information

B5024 - Relief Valve for Fuel Rail Pressure, Component Information

Group 40Z: Electrical Components - Other

E005 - Cigarette Lighter, Component Information

E006 - 2-Terminal Power Outlet Socket, Component Information

W024 - Antenna for Telematics (JDLink™/Service ADVISOR™ Remote), Component Information

W024 - Antenna for Telematics (JDLink™/Service ADVISOR™ Remote) (4G) (from CIU End 2017), Component Information

W027 - Radio Antenna, Component Information

W028 - Antenna for Immobilizer, Component Information

W029 - Antenna for XM Satellite Radio, Component Information

A030 - Antenna for Machine Sync, Component Information

X005 - 7-Pin Socket (ECE) at Rear, Component Information

X006 - 3-Terminal Power Outlet Socket, Component Information

X023 - 7-Terminal Power Outlet Socket (SAE), Component Information

X132 - Signal Socket, Component Information

X197 - Socket for the Anti-Blocking System (ABS) of Trailer, Component Information

X257 - 3-Terminal Power Outlet Socket, Component Information

X304 - 3-Terminal Multiple Power Outlet Socket Strip, Component Information

X571 - Service Socket (CAN Bus), Component Information

X883 - 7-Terminal Power Outlet Socket (ECE) at Front, Component Information

X884 - 3-Terminal Power Outlet Socket (Field Office™), Component Information

X886 - 3-Pin Socket (Shift Console), Component Information

X888 - Implement CAN Bus Socket in Cab, Component Information

X907F - Socket of GreenStar™ Display (A-Post), Component Information

X978F - Socket of GreenStar™ Display (C-Post), Component Information

X1155 - Socket for Video Camera, Component Information

X1201 - Connection for Remote-Start Aid, Component Information

Section 250A: Drive Train (without Transmission)

Group 10: Drive Train (without Transmission) - Operational Checks

Drive Train (without Transmission) - Operational Checks, Summary of References

Operational Checks - General Checks

Group 20: Drive Train (without Transmission) - Theory of Operation

Drive Train (without Transmission) - Theory of Operation, Summary of References

Front-Wheel Drive - Layout and Theory of Operation (6110R - 6135R Tractors)

Front-Wheel Drive - Cooling and Lubrication (6110R - 6135R Tractors)

Front-Wheel Drive - Oil and Power Flows (6110R - 6135R Tractors)

Front-Wheel Drive - Layout and Theory of Operation (6145R - 6215R Tractors)

Front-Wheel Drive - Cooling and Lubrication (6145R - 6215R Tractors)

Front-Wheel Drive - Oil and Power Flows (6145R - 6215R Tractors)

Differential - Layout and Theory of Operation (6110R - 6135R Tractors)

Differential - Layout and Theory of Operation (6145R - 6155R Tractors)

Differential - Layout and Theory of Operation (6175R - 6215R Tractors)

Differential - Power Flows

Differential - Oil Flows

Hydraulic Pump Drive - Layout

Final Drives - Layout and Theory of Operation (6110R - 6135R Tractors)

Final Drives - Layout and Theory of Operation (6145R - 6155R Tractors)

Final Drives - Layout and Theory of Operation (6175R - 6215R Tractors)

Rear PTO Options - Layout and Theory of Operation

Rear PTO Options - Y81 - Proportional Solenoid Valve for Rear PTO

Rear PTO Options - PTO Clutch and PTO Brake

Rear PTO Options - Lube Cut-Off Valve

Rear PTO Options - 540/540E/1000 rpm Power Flows

Rear PTO Options - 540E/1000/1000E rpm Power Flows

Front PTO for European Tractors - Layout and Theory of Operation

Group 50: Drive Train (without Transmission) - Tests and Adjustments

Drive Train (without Transmission) - Tests and Adjustments, Summary of References

Drive Train (without Transmission) - Special Tools

Drive Train (without Transmission) - Repair Specifications

Drive Train (without Transmission) - System Check

Drive Train (without Transmission) - Check Front-Wheel Drive

Drive Train (without Transmission) - Checking the Differential Lock

Drive Train (without Transmission) - Check Rear PTOs

Drive Train (without Transmission) - Checking the Front PTO

Drive Train (without Transmission) - Test Result Table

Section 250B: AutoPowr™/IVT™ Transmission

Group 05: AutoPowr™/IVT™ Transmission - General Information

AutoPowr™/IVT™ Transmission - General Information, Summary of References

AutoPowr™/IVT™ Transmission - Preliminary Checks

Group 10: AutoPowr™/IVT™ Transmission - Operational Checks

AutoPowr™/IVT™ Transmission - Operational Checks, Summary of References

AutoPowr™/IVT™ Transmission - Operational Checks

Group 20: AutoPowr™/IVT™ Transmission - Theory of Operation

AutoPowr™/IVT™ Transmission - Theory of Operation, Summary of References

AutoPowr™/IVT™ Transmission - Layout and Theory of Operation

AutoPowr™/IVT™ Transmission - AutoPowr™/IVT™ Transmission Module, Layout

AutoPowr™/IVT™ Transmission - Sectional View of Transmission

AutoPowr™/IVT™ Transmission - Transmission Control Components

AutoPowr™/IVT™ Transmission - Control of Transmission

AutoPowr™/IVT™ Transmission - Operation of Hydrostatic Unit

AutoPowr™/IVT™ Transmission - Diagram of Transmission

AutoPowr™/IVT™ Transmission - Element Engagement Chart

AutoPowr™/IVT™ Transmission - Power Flows

AutoPowr™IVT™ Transmission - Oil Flows

AutoPowr™/IVT™ Transmission - Operation of Park Lock

AutoPowr™/IVT™ Transmission - Shift Units

Group 30: AutoPowr™/IVT™ Transmission - Hydraulic Schematics

AutoPowr™/IVT™ Transmission - Hydraulic Schematics, Summary of References

AutoPowr™/IVT™ Transmission - Description of Transmission Oil Circuit (including Hydraulic Schematic)

AutoPowr™/IVT™ Transmission - Description of System Pressure Control Block (including Hydraulic Schematic)

AutoPowr™/IVT™ Transmission - Description of Clutch Control Block (including Hydraulic Schematic)

Group 50: AutoPowr™/IVT™ Transmission - Tests and Adjustments

AutoPowr™/IVT™ Transmission - Tests and Adjustments, Summary of References

AutoPowr™/IVT™ Transmission - Special Tools, Summary of References

AutoPowr™/IVT™ Transmission - CAN Bus Recording

AutoPowr™/IVT™ Transmission - Interactive Test for Lube Oil Pressure Test with Service ADVISOR™

AutoPowr™/IVT™ Transmission - Interactive Test of Hydrostatic Unit with Service ADVISOR™

AutoPowr™/IVT™ Transmission - Manual Test of Hydrostatic Unit via the Test Mode for Components (Address PTA 049)

AutoPowr™/IVT™ Transmission - Safety Measures when Testing the Transmission via the Test Mode for Components (Address PTA 049)

AutoPowr™/IVT™ Transmission - Transmission Speed Sensor Check for Diagnostic Trouble Codes PTA 523700.07 and PTA 524156.07

AutoPowr™/IVT™ Transmission - Assessment of Pressure Tests for Diagnostic Trouble Codes PTA 523700.07 and PTA 524156.07

AutoPowr™/IVT™ Transmission - Assessment of Checklist (List of Questions) for Diagnostic Trouble Codes PTA 523700.07 and PTA 524156.07

AutoPowr™/IVT™ Transmission - Travel Speed/Engine Speed Graph for Ascertaining which Transmission Band the Problem is In

AutoPowr™/IVT™ Transmission - Checklist (List of Questions) for Diagnostic Trouble Codes PTA 523700.07 and PTA 524156.07

AutoPowr™/IVT™ Transmission - Identification of the Cause of Noises/Vibrations

AutoPowr™/IVT™ Transmission - Test for Noise Caused by Cavitation

AutoPowr™/IVT™ Transmission - Noise Tests for Noises with a Direct Relationship to Engine Speed

AutoPowr™/IVT™ Transmission - Noise Tests for Noises with a Direct Relationship to Ground Speed

AutoPowr™/IVT™ Transmission - Noise Tests (No Direct Relationship can be Detected)

AutoPowr™/IVT™ Transmission - Checklist (List of Questions) for Problem with Noise/Vibrations

AutoPowr™/IVT™ Transmission - Test Result Table

AutoPowr™/IVT™ Transmission - Test Result Table for System Pressure and Lube Oil Pressure

AutoPowr™/IVT™ Transmission - Checklist (List of Questions) for Problems with AutoPowr™/IVT™ Transmission

AutoPowr™/IVT™ Transmission - System Check

AutoPowr™/IVT™ Transmission - Test Ports

AutoPowr™/IVT™ Transmission - System Pressure Test

AutoPowr™/IVT™ Transmission - Reduced System Pressure Test (Pressure for Other Consumers)

AutoPowr™/IVT™ Transmission - Oil Cooler Pressure Test

AutoPowr™/IVT™ Transmission - Lube Oil Pressure Test (When No Consumer is Activated)

AutoPowr™/IVT™ Transmission - K1 Clutch Test

AutoPowr™/IVT™ Transmission - K2 Clutch Test

AutoPowr™/IVT™ Transmission - K3 Clutch Test

AutoPowr™/IVT™ Transmission - K4 Clutch Test

AutoPowr™/IVT™ Transmission - BG Disk Brake Test

AutoPowr™/IVT™ Transmission - KV Forward Clutch Test

AutoPowr™/IVT™ Transmission - KR Reverse Clutch Test

AutoPowr™/IVT™ Transmission - Park Lock Pressure Test

AutoPowr™/IVT™ Transmission - Check Transmission Oil Displacement and Air Pump (6175R - 6215R Tractors)

Section 250C: PowrQuad™ Transmission

Group 05: PowrQuad™ Transmission - General Information

PowrQuad™ Transmission - General Information, Summary of References

PowrQuad™ Transmission - Preliminary Checks

Group 10: PowrQuad™ Transmission - Operational Checks

PowrQuad™ Transmission - Operational Checks, Summary of References

PowrQuad™ Transmission - Operational Check

Group 20: PowrQuad™ Transmission - Theory of Operation

PowrQuad™ Transmission - Theory of Operation, Summary of References

PowrQuad™ Transmission - Layout and Theory of Operation

PowrQuad™ Transmission - PowrQuad™ Module, Layout

PowrQuad™ Transmission - PowrQuad™ Module, Sectional and 3D View

PowrQuad™ Transmission - PowrQuad™ Module, Air Pump

PowrQuad™ Transmission - PowrQuad™ Module, Transmission Oil Pump

PowrQuad™ Transmission - PowrQuad™ Module, Description of the Valves and Components

PowrQuad™ Transmission - Overview of the Transmission Versions

PowrQuad™ Transmission - Shift PowrQuad PLUS™ Transmission

PowrQuad™ Transmission - Shift AutoQuad PLUS™ Transmission

PowrQuad™ Transmission - Declutch Switch on Range-Shift Lever

PowrQuad™ Transmission - Clutch Actuation

PowrQuad™ Transmission - Range Transmission, Park Lock (6110R - 6135R Tractors)

PowrQuad™ Transmission - Range Transmission, Layout (6110R - 6135R Tractors)

PowrQuad™ Transmission - Range Transmission, Power Flow (6110R - 6135R Tractors)

PowrQuad™ Transmission - Creeper Transmission, Theory of Operation (6110R - 6135R Tractors)

PowrQuad™ Transmission - Creeper Transmission, Power Flow (6110R - 6135R Tractors)

PowrQuad™ Transmission - Range Transmission, Layout (6145R - 6155R Tractors)

PowrQuad™ Transmission - Creeper Transmission, Theory of Operation (6145R - 6155R Tractors)

Group 30: PowrQuad™ Transmission - Hydraulic Schematic

PowrQuad™ Transmission - Schematics, Summary of References

PowrQuad™ Transmission - Hydraulic Schematic for Electrically Actuated PowrQuad™ Module

PowrQuad™ Transmission - PowrQuad™ Module, Pressure-Regulating Valve and Filter By-Pass Valve (incl. Hydraulic Schematic)

PowrQuad™ Transmission - Cooling of the Electrically Actuated PowrQuad™ Module (incl. Hydraulic Schematic)

PowrQuad™ Transmission - Theory of Operation of Forward/Reverse Modulation for Electrically Actuated PowrQuad™ Module (incl. Hydraulic Schematic)

PowrQuad™ Transmission - Gear-to-Gear Modulation with Element Engagement Chart (incl. Hydraulic Schematic)

Group 50: PowrQuad™ Transmission - Tests and Adjustments

PowrQuad™ Transmission - Tests and Adjustments, Summary of References

PowrQuad™ Transmission - Special Tools, Summary of References

PowrQuad™ Transmission - System Check

PowrQuad™ Transmission - System Pressure Test

PowrQuad™ Transmission - Lube Oil Pressure Test

PowrQuad™ Transmission - Cooling Oil Control Test

PowrQuad™ Transmission - Forward Clutch Test

PowrQuad™ Transmission - Reverse Brake Test

PowrQuad™ Transmission - B1 Brake Test

PowrQuad™ Transmission - B2 Brake Test

PowrQuad™ Transmission - B3 Brake Test

PowrQuad™ Transmission - C4 Clutch Test

PowrQuad™ Transmission - Adjust System Pressure

PowrQuad™ Transmission - Test Result Table

PowrQuad™ Transmission - Check and Adjust the Shift Unit and Park Lock

PowrQuad™ Transmission - Check Transmission Oil Displacement and Air Pump (6175R - 6215R Tractors)

Section 250D: DirectDrive Transmission

Group 05: DirectDrive Transmission - General Information

DirectDrive Transmission - General Information, Summary of References

DirectDrive Transmission - Preliminary Checks

Group 10: DirectDrive Transmission - Operational Checks

DirectDrive Transmission - Operational Checks, Summary of References

DirectDrive Transmission - Operational Checks

Group 20: DirectDrive Transmission - Theory of Operation

DirectDrive Transmission - Theory of Operation, Summary of References

DirectDrive Transmission - Summary of Components (Control Software)

DirectDrive Transmission - Layout and General Information

DirectDrive Transmission - Sectional View

DirectDrive Transmission - Power Flow

DirectDrive Transmission - PowrReverser™ Module

DirectDrive Transmission - Gear Transmission

DirectDrive Transmission - Range Transmission

DirectDrive Transmission - Park Lock Module

DirectDrive Transmission - Transmission Control Components

DirectDrive Transmission - Hydraulic System Operation

DirectDrive Transmission - Shift Units

Group 30: DirectDrive Transmission - Hydraulic Schematic

DirectDrive Transmission - Hydraulic Schematic, Summary of References

DirectDrive Transmission - Hydraulic Schematic

Group 50: DirectDrive Transmission - Tests and Adjustments

DirectDrive Transmission - Tests and Adjustments, Summary of References

DirectDrive Transmission - Special Tools, Summary of References

DirectDrive Transmission - Tests and Adjustments, General Information

DirectDrive Transmission - Slippage Test in Come-Home Mode

DirectDrive Transmission - Transmission Test

DirectDrive Transmission - Drive Test

DirectDrive transmission - Calibration (transmission test)

DirectDrive Transmission - CAN Bus Recording

DirectDrive Transmission - Hydraulic System Test (Main System)

DirectDrive Transmission - Hydraulic System Test (Components)

DirectDrive Transmission - Test Ports

DirectDrive Transmission - Reduced System Pressure Test (System 2 Pressure)

DirectDrive Transmission - System Pressure Test (System 1 Pressure)

DirectDrive Transmission - Test of Lube Oil Pressure and Lube Oil Pressure with Transmission Components Activated

DirectDrive Transmission - Forward Clutch Pressure Test

DirectDrive Transmission - Reverse Brake Pressure Test

DirectDrive Transmission - Pressure Test for Clutch for Side Shaft 1

DirectDrive Transmission - Pressure Test for Clutch for Side Shaft 2

DirectDrive Transmission - Test of Other Consumers

DirectDrive Transmission - Reduced System Pressure Adjustment (System 2 Pressure)

DirectDrive Transmission - Check Transmission Oil Displacement and Air Pump

DirectDrive Transmission - Checklist

Section 259: Drivetrain - Component Information

Group 40A: Drive Train (without Transmission) - Component Information

Drive Systems - Component Information, Summary of References

Front-Wheel Drive - Summary of Sensors and Solenoid Valves

Differential - Summary of Sensors and Solenoid Valves

Rear PTO Options - Summary of Sensors and Solenoid Valves

Group 40B: AutoPowr™/IVT™ Transmission - Component Information

AutoPowr™/IVT™ Transmission - Component Information, Summary of References

AutoPowr™/IVT™ Transmission - Summary of Valve and Sensor Locations (6110R-6135R Tractors)

AutoPowr™/IVT™ Transmission - Summary of Valve and Sensor Locations (6145R-6215R Tractors)

Group 40C: PowrQuad™ Transmission - Component Information

PowrQuad™ Transmission - Component Information, Summary of References

PowrQuad™ Transmission - PowrQuad™ Module, Summary of Valve and Sensor Locations

Group 40D: DirectDrive Transmission - Component Information

DirectDrive Transmission - Component Information, Summary of References

DirectDrive Transmission - Summary and Locations of Sensors (6110R-6215R Tractors)

Section 260A: Steering

Group 05: Steering - General Information

Steering - General Information, Summary of References

Steering - Important Information on Replacing Steering Valve

Steering, Preliminary Checks

AutoTrac™ Steering System, Preliminary Checks

Group 10: Steering - Operational Checks

Steering - Operational Checks, Summary of References

Safety Measures, Operational Checks

Steering, Operational Checks

Steering, Operational Check of AutoTrac™ System

Group 20: Steering - Theory of Operation

Steering - Theory of Operation, Summary of References

Hydrostatic Steering, Theory of Operation

Hydrostatic Steering - Oil Flow

Hydrostatic Steering,- LAGU Steering Units (LD), Theory of Operation

Hydrostatic Steering,- LAGZ Steering Units (LD), Theory of Operation

AutoTrac™, Theory of Operation

Group 30: Steering - Schematics

Steering - Schematics, Summary of References

Steering - LAGU Steering Units, Hydraulic Schematic

Steering - LAGZ Steering Units, Hydraulic Schematic

Steering - AutoTrac™, Hydraulic Schematic

Group 50: Steering - Tests and Adjustments

Steering - Tests and Adjustments, Summary of References

Steering - Special Tools, Summary of References

Steering - Specifications

Steering - Test Procedure

Steering - System Check

Steering - Connect the SensoControl Testing Equipment

Steering - Summary of Steering Valves

Steering - Check the Steering Unit

Steering - System Check on AutoTrac™

Steering - Hydraulic System Check on AutoTrac™

Steering - Adjust the Steering Stop (Two-Piece Front Axle)

Steering - Adjust the Steering Stop (Three-Piece Front Axle - Version 2)

Steering - Prevent Front Wheel or Fender Contact with Tractor Components

Steering - Steering Symmetry, Steering Stops and Automatic Switch-On and Switch-Off of the Front-Wheel Drive

Section 260B: Brakes

Group 05: Brakes - General Information

Brakes - General Information, Summary of References

Preliminary Checks - Brakes

Group 10: Brakes - Operational Checks

Brakes - Operational Checks, Summary of References

Safety Measures, Operational Checks

Brakes, Operational Checks

Group 20: Brakes - Theory of Operation

Brakes - Theory of Operation, Summary of References

Power Brake Valve, Theory of Operation

Brake Valve with Front-Wheel Drive and Disk Brake, Theory of Operation

Rear Brakes - Layout and Theory of Operation (6110R - 6135R Tractors)

Rear Brakes - Layout and Theory of Operation (6145R - 6155R Tractors)

Rear Brakes - Layout and Theory of Operation (6175R - 6215R Tractors)

Hydraulic Trailer Brake - Layout and Theory of Operation (Single-Line Brake)

Hydraulic Trailer Brake - Layout and Theory of Operation (Dual-Line Brake)

Air Brake System - Layout and Theory of Operation

Emergency Brake - Layout and Theory of Operation

Group 30: Brakes - Schematics

Brakes - Schematics, Summary of References

Power Brake Valve, Hydraulic Schematic

Brake Valve (With Front-Wheel Drive and Disk Brake), Hydraulic Diagram

Hydraulic Trailer Brake, Hydraulic Schematic (Single-Line Brake)

Hydraulic Trailer Brake, Hydraulic Schematic (Dual-Line Brake)

Air-Brake System, Schematic

Group 50: Brakes - Tests and Adjustments

Brakes - Tests and Adjustments, Summary of References

Brakes - Special Tools, Summary of References

Brakes - Specifications

Brakes - Test Procedure

Brakes - System Check

Brakes - Connect the SensoControl Testing Equipment

Check Brake System

Bleed Brakes

Bleed the Emergency Brake

Adjust Brake Pedals and Brake Switch

Check Hydraulic Foot Brake

Check the Trailer Brake Valve

Check Air-Brake System

Check Air Brake System for Leaks

Check Coupling End (Supply)

Check Coupling End (Brake)

Check Dual-Line Brake

Check Single-Line Brake

Check Emergency Brake Function of the Air Brake System

Section 269: Steering and Brakes Component Information

Group 40A: Steering - Component Information

Steering - Component Information, Summary of References

Hydrostatic Steering - LAGU Steering Units with Dynamic Load Sense (LD), Component Information

Hydrostatic Steering - LAGZ Steering Units with Dynamic Load Sense (LD), Component Information

AutoTrac™, Component Information

Group 40B: Brakes - Component Information

Brakes - Component Information, Summary of References

Brakes - Adapter Housing, Component Information

Hydraulic Trailer Brake - Trailer Brake Valve (for Single-Line Brake), Component Information

Hydraulic Trailer Brake - Quick Coupler with Shut-Off Valve, Component Information

Hydraulic Trailer Brake - Trailer Brake Valve (for Dual-Line Brake), Component Information

Rear Brakes - Delay Valve with Shuttle Valve, Component Information

Air-Brake System - Compressor, Component Information

Air-Brake System - Compressed-Air Tank, Component Information

Air-Brake System - Trailer Control Valve (Dual-Line Brake), Component Information

Air Brake System - Y117 - Solenoid Valve, Component Information

Air Brake System - Trailer Control Valve (Single-Line Brake), Component Information

Air Brake System - Pneumatic Shuttle Valve, Component Information

Air-Brake System - Coupling Ends, Component Information

Section 270: Hydraulic System

Group 05: Hydraulic System - General Information

Hydraulic System - General Information, Summary of References

Hydraulic System - Safety Measures for Hydraulic Checks

Hydraulic System - Summary of Abbreviations

Group 10: Hydraulic System - Operational Checks

Hydraulic System - Operational Checks, Summary of References

Hydraulic System - Load Check

R5 - Additional Oil Reservoir, Operational Check (PFC Hydraulic System)

Rear Hitch - Remote Control, Operational Check

Front Hitch (Premium) - Remote Control, Operational Check

Selective Control Valves (M-SCV I—IV) - Operational Checks

Selective Control Valves (E-SCV 450 I—VI) - Operational Checks

Selective Control Valve (E-SCV 300 XI—XIII) - Operational Checks

Group 20: Hydraulic System - Theory of Operation

Hydraulic System - Theory of Operation, Summary of References

PFC Hydraulic System - General Operation

Group 20A: Oil Filter, Additional Oil Reservoir, Charge Pump and Hydraulic Pump - Theory of Operation

Oil Filter, Additional Oil Reservoir, Charge Pump and Hydraulic Pump - Theory of Operation, Summary of References

F2 and F8 - Hydraulic Oil Filters, Theory of Operation (PFC Hydraulic System)

R5 - Additional Oil Reservoir, Theory of Operation (PFC Hydraulic System)

P1, P5 and P7 - Charge Pump, Theory of Operation (PFC Hydraulic System)

P2, P4 and P8 - Hydraulic Pump, Theory of Operation (PFC Hydraulic System)

P2, P4 and P8 - Hydraulic Pump, Operating Modes (PFC Hydraulic System)

Group 20B: Rear Hitch - Theory of Operation

Rear Hitch - Theory of Operation, Summary of References

Hitch Control - Theory of Operation (Rear Hitch)

G56 - Hitch Valve, Theory of Operation (Rear Hitch) (PFC Hydraulic System)

B021 - Position Sensor, Theory of Operation (Rear Hitch)

B19 and B20 - Draft Sensor, Theory of Operation (6110R—6135R) (Rear Hitch)

B041 - Draft Sensor, Theory of Operation (6145R—6215R) (Rear Hitch)

C8 and C9 - Hydraulic Draft Link Stabilizer Bars (HSB), Theory of Operation (Rear Hitch)

Rear Hitch - Direct Actuation

Group 20C: Front Hitch - Theory of Operation

Front Hitch - Theory of Operation, Summary of References

Hitch Control - Theory of Operation (Economy Front Hitch) (PFC Hydraulic System)

Hitch Control - Theory of Operation (Premium Front Hitch) (PFC Hydraulic System)

G72 - Hitch Valve, Theory of Operation (Premium Front Hitch (PFC Hydraulic System)

Group 20D: Selective Control Valves (SCVs) - Theory of Operation

Selective Control Valves (SCVs) - Theory of Operation, Summary of References

G17 - Selective Control Valve (M-SCV 100), Theory of Operation

G18 - Selective Control Valve (M-SCV 200), Theory of Operation

G27 - Selective Control Valve (M-SCV 450), Theory of Operation

G69 - Selective Control Valve (E-SCV 450), Theory of Operation

G24, G25 and G26 - Selective Control Valve (M-SCV) - Theory of Operation

G70 and G71 - Selective Control Valve (E-SCV 300), Theory of Operation

Group 30: Hydraulic System - Schematics

PFC Hydraulic System - Schematics, Summary of References

PFC Hydraulic System - General Hydraulic Schematics

Group 50: Hydraulic System - Tests and Adjustments

PFC Hydraulic System - Tests and Adjustments, Summary of References

Hydraulic System - Special Tools, Summary of References

PFC Hydraulic System - Test Result Table for Hydraulic System

Hydraulic System - Heat Up the Hydraulic Oil

PFC Hydraulic System - Test Ports for Oil Pressure

PFC Hydraulic System - System Check

PFC Hydraulic System - Check the LS Pressure

PFC Hydraulic System - Check and Adjust System Pressure

PFC Hydraulic System - Check and Adjust the Pressure Differential

PFC Hydraulic System - Priority Circuit 1, Check the Oil Pressure for Steering

PFC Hydraulic System - Priority Circuit 1, Check Foot Brake Oil Pressure

PFC Hydraulic System - Priority Circuit 2, Check the Oil Pressure

PFC Hydraulic System - Priority Circuit 3, Check the Oil Pressure

PFC Hydraulic System - Check the Charge and Lube Oil Pressure

PFC Hydraulic System - Hydraulic Pump, Check the Delivery Rate

J18 and J19 - Check Couplers Function and for Leaks (SCV I—VI)

J7, J8, J25 and J26 - Couplers, Check the Flow Rate (Front Hitch)

G27 - Selective Control Valve (M-SCV 450), Adjust the Automatic Release of Detent

G56 - Check the Hitch Valve and Stepper Motor (Rear Hitch)

G56 - Hitch Valve, Check for Leaks (Rear Hitch)

G72 - Hitch Valve, Check for Leaks (Premium Front Hitch)

B021 - Check the Position Sensor (Rear Hitch)

B019 and B020 - Check and Adjust the Draft Sensors (Rear Hitch) (6110R—6135R)

B041 - Check and Adjust the Draft Potentiometer (Rear Hitch) (6145R—6215R)

C8 and C9 - Check the Hydraulic Draft Link Stabilizer Bars (HSB), Oil Pressure (Rear Hitch)

C8 and C9 - Hydraulic Draft Link Stabilizer Bars (HSB), Adjust Spreading Dimension (Rear Hitch)

Section 279: Hydraulic System - Component Information

Group 40: Hydraulic System - Component Information

PFC Hydraulic System - Component Information, Summary of References

PFC Hydraulic System - Summary of Components

PFC Hydraulic System - Hydraulic Block, Summary of Components

PFC Hydraulic System - Rear Hitch, Summary of Components

PFC Hydraulic System - Front Hitch (Economy), Summary of Components

PFC Hydraulic System - Front Hitch (Premium), Summary of Components

F1 and F7 - Hydraulic Oil Primary Filter, Component Information (Hydraulic System)

F2 and F8 - Hydraulic Oil Filter, Component Information (PFC Hydraulic System)

P1, P5 and P7 - Charge Pump, Component Information (PFC Hydraulic System)

P2, P6 and P8 - Hydraulic Pump, Component Information (PFC Hydraulic System)

G54 - Priority Valve, Component Information (PFC Hydraulic System)

G56 - Hitch Valve, Component Information (Rear Hitch)

G72 - Hitch Valve, Component Information (Premium Front Hitch)

G17 - Selective Control Valve (M-SCV 100), Component Information

G18 - Selective Control Valve (M-SCV 200), Component Information

G27 - Selective Control Valve (M-SCV 450), Component Information

G69 - Selective Control Valve (E-SCV 450), Component Information

G24, G25 and G26 - Selective Control Valve (M-SCV) for Front Loader, Component Information

G70 and G71 - Selective Control Valve (E-SCV 300) for Front Loader, Component Information

G67 - HSB Control Block, Component Information (PFC Hydraulic System)

G23 - PB Housing with Connections (P, LS, R) for External Control Valves, Component Information (Hydraulic System)

G58 - Inlet Housing with Commutation Valve, Component Information (Premium Front Hitch)

G61 - Commutation Valve, Component Information (Premium Front Hitch)

Section 280A: Machine-Specific Systems

Group 10: Machine-Specific Systems - Operational Checks

Machine-Specific Systems - Operational Checks, Summary of References

Pick-Up Hitch - Operational Checks

Electro-Hydraulic Pick-Up Hitch (E-PUH) - Operational Checks

Group 20: Machine-Specific Systems - Theory of Operation

Machine-Specific Systems - Theory of Operation, Summary of References

Group 30: Machine-Specific Systems - Electrical System Diagrams

Machine-Specific Systems - Schematics, Summary of References

Electro-Hydraulic Pick-Up Hitch (E-PUH) - Hydraulic Diagram (Extend)

Electro-Hydraulic Pick-Up Hitch (E-PUH) - Hydraulic Diagram (Retract)

Electro-Hydraulic Pick-Up Hitch (E-PUH) - Hydraulic Diagram (Neutral Position)

Group 50: Machine-Specific Systems - Tests and Adjustments

Machine-Specific Systems - Tests and Adjustments, Summary of References

Specifications

Adjust the Lift Links

Adjust Guide Stop

Adjust the Locking Pin

Section 280B: Suspension Systems

Group 10: Suspension Systems - Operational Checks

Suspension Systems - Operational Checks, Summary of References

Suspension Systems - Operational Checks

Group 20A: Suspended Front-Wheel Drive Axle - Theory of Operation

Suspended Front-Wheel Drive Axle - Theory of Operation, Summary of References

Suspended Front-Wheel Drive Axle - Theory of Operation

Suspended Front-Wheel Drive Axle - CommandCenter™ Settings, Description

Suspended Front-Wheel Drive Axle - Level Control, Description

Group 20B: Cab Suspension - Theory of Operation

Cab Suspension - Theory of Operation, Summary of References

Cab Suspension - Theory of Operation

Cab Suspension - CommandCenter™ Settings, Description

Cab Suspension - Level Control, Description

Group 30A: Suspended Front-Wheel Drive Axle - Schematics

Suspended Front-Wheel Drive Axle - Schematics, Summary of References

Suspended Front-Wheel Drive Axle - Hydraulic Schematic of Suspension Function

Suspended Front-Wheel Drive Axle - Hydraulic Schematic (Raise)

Suspended Front-Wheel Drive Axle - Hydraulic Schematic (Lower)

Group 30B: Cab Suspension - Schematics

Cab Suspension - Schematics, Summary of References

Cab Suspension - Hydraulic Diagram (Suspension Function)

Cab Suspension - Hydraulic Diagram (Raise)

Cab Suspension - Hydraulic Diagram (Lower)

Group 50A: Suspended Front-Wheel Drive Axle - Tests and Adjustments

Suspended Front-Wheel Drive Axle - Tests and Adjustments, Summary of References

Suspended Front-Wheel Drive Axle - Special Tools, Summary of References

Suspended Front-Wheel Drive Axle - Specifications

Suspended Front-Wheel Drive Axle - System Check

Suspended Front-Wheel Drive Axle - Check and Adjust the Nitrogen Precharge

Suspended Front-Wheel Drive Axle - Test Result Table

Group 50B: Cab Suspension - Tests and Adjustments

Cab Suspension - Tests and Adjustments, Summary of References

Cab Suspension - Special Tools, Summary of References

Cab Suspension - Specifications

Cab Suspension - System Check

Cab Suspension - Check and Adjust the Nitrogen Precharge

Cab Suspension - Test Result Table

Section 289: Machine-Specific Systems and Suspension Systems - Component Information

Group 40A: Suspended Front-Wheel Drive Axle - Component Information

Suspended Front-Wheel Drive Axle - Component Information, Summary of References

Suspended Front-Wheel Drive Axle - Summary of Components

Suspended Front-Wheel Drive Axle - Position Sensor of Suspended Front-Wheel Drive Axle, Component Information

Suspended Front-Wheel Drive Axle - Control Block, Component Information

Suspended Front-Wheel Drive Axle - Hydraulic Cylinder and Accumulator, Component Information

Suspended Front-Wheel Drive Axle - SFA Control Software, Component Information

Group 40B: Cab Suspension - Component Information

Cab Suspension - Component Information, Summary of References

Cab Suspension - Summary of Components

Cab Suspension - Cab Position Sensor, Component Information

Cab Suspension - Rubber Supports, Component Information

Cab Suspension - Control Block, Component Information

Cab Suspension - Hydraulic Cylinder and Accumulator, Component Information

Cab Suspension - Proportional Solenoid Valve, Component Information

Cab Suspension - CSC Control Software, Component Information

Group 40C: Machine-Specific Systems - Component Information

Machine-Specific Systems - Component Information, Summary of References

Machine-Specific Systems - Summary of Components

Electro-Hydraulic Pick-Up Hitch (E-PUH) - Component Information

Section 290: Operator's Cab

Group 10: Operator's Cab - Operational Checks

Operator's Cab - Operational Checks, Summary of References

Air Conditioning System, Operational Checks

Air Comfort Seat MSG95, Operational Checks

Group 20: Operator's Cab - Theory of Operation

Operator's Cab - Theory of Operation, Summary of References

Air-Conditioning System, Operation

Air Conditioning System - Pre-Filter, Theory of Operation

Group 50: Operator's Cab - Tests and Adjustments

Operator's Cab - Tests and Adjustments, Summary of References

Operator's Cab - Special Tools, Summary of References

Operator's Cab - Repair Specifications

Operator's Cab - Air Conditioning System, Safety at Work

Operator's Cab - System Check

Air Conditioning System / Automatic Air Conditioning Control - Storage of Refrigerant Cans

Air Conditioning System / Automatic Air Conditioning Control - Important

Air Conditioning System - Service Work

Air Conditioning System - Preventive Maintenance

Air Conditioning System - Test with Air Conditioning Service Unit

Air-Conditioning System - System Check

Air Conditioning System - Pressure Deviations

Automatic Air Conditioning Control - Pressure Deviations

Air Comfort Seat MSG95 - Diagnostics

Air Comfort Seat MSG95 - Compressor Operational Check

Air Comfort Seat MSG95 - System Leak Test

Section 299: Operator's Cab - Component Information

Group 40: Air-Conditioning System/Automatic Air-Conditioning Control - Component Information

Air-Conditioning System/Automatic Air-Conditioning Control - Component Information, Summary of References

Air Conditioning System - Summary of Components

Air Conditioning System - Compressor, Component Information

Air Conditioning System - Condenser, Component Information

Air Conditioning System - Receiver-Drier, Component Information

Air Conditioning System - Expansion Valve, Component Information

Air Conditioning System - Evaporator, Component Information

Air-Conditioning System - B129 - Evaporator Temperature Sensor, Component Information

Air Conditioning System - B130 - Refrigerant Pressure Sensor, Component Information

Air Conditioning System - B131 - Heater Valve, Component Information

Air Conditioning System - B132 - Actuator for Air Distribution, Component Information

Air Conditioning System / Automatic Air Conditioning Control - Pre-Filter, Component Information

Air Conditioning System / Automatic Air Conditioning Control - Resonator, Component Information

Automatic Air-Conditioning Control - B125 - Ambient Air Temperature Sensor (at Front), Component Information

Automatic Air-Conditioning Control - B126 - Ambient Air Temperature Sensor (at Rear), Component Information

Automatic Air-Conditioning Control - B127 - Inside Air Temperature Sensor, Component Information

Automatic Air-Conditioning Control - B128 - Outlet Temperature Sensor, Component Information

Automatic Air-Conditioning Control - B143 - Defog Sensor, Component Information

Automatic Air-Conditioning Control - M07 - Pressurizer Blower Motor for Pressure Inside Cab, Component Information

Section 300: Special Tools

Group 05: General Information

Special Tools - General Information

 

Logo