Complete Diagnosis & Tests Technical Manual with electrical wiring diagrams for John Deere Tractors 8110T, 8210T, 8310T, 8410T, with all the workshop information to maintain, diagnose, and service like professional mechanics.

John Deere 8110T, 8210T, 8310T, 8410T Tracks Tractors workshop Diagnosis & Tests technical manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

tm1799 - 8110T, 8210T, 8310T and 8410T Tractors Technical Manual.pdf
tm1799 - 8110T, 8210T, 8310T and 8410T Tractors Technical Manual.epub

Total Pages: 1,624 pages
File Format: PDF/EPUB/MOBI/AZW (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English

MAIN SECTIONS
 Foreword
   GENERAL
      Safety
      General References
   ENGINE
      Operational Checks
      Tests and Adjustments
      Theory of Operation
   FUEL AND AIR
      Theory of Operation
   ELECTRICAL
      Tests and Adjustments
      Theory of Operation
      Schematics and Diagrams
   CONTROL UNITS
      Codes and Addresses
      ACU References
      CCU References
      GREENSTAR™ SYSTEMS
      HCU References
      ICU References
      Implement Management System (IMS) References
      PCU References
      SCU References
      SCo References
      SSU References
      SUP References
   AG MANAGEMENT SOLUTIONS (AMS)-JDLINK™
      Accessing Diagnostic Addresses and Codes
      Diagnostic Trouble Codes
      Diagnostic Addresses
      JDLINK™ Machine Messenger Diagnostics
   AG MANAGEMENT SOLUTIONS (AMS) - AUTOTRAC
      How to Use This Diagnostic Information
      Accessing Diagnostic Addresses and Codes
      Diagnostic Trouble Codes
      AutoTrac Identification
      AutoTrac Diagnostics - 8000 Series Field Installed
      GREENSTAR™ Parallel Tracking Identification
      Parallel Tracking Diagnostics - 8000 Series Field Installed
      GREENSTAR™ Display Diagnostics
      GREENSTAR™ Mobile Processor Diagnostics
      STARFIRE™ Receiver Diagnostics
      GREENSTAR™ KeyCard Diagnostics
      AutoTrac CAN Bus Identification
      AutoTrac CAN Bus Diagnostics - 8000 Series Field Installed
      AutoTrac CCD Bus Identification
      AutoTrac CCD Bus Diagnostics - 8000 Series Field Installed
      AutoTrac Power Identification
      AutoTrac Power Diagnostics - 8000 Series Field Installed
      AutoTrac Status Identification
      AutoTrac Status Diagnostics - 8000 Series Field Installed
      AutoTrac Steering Response Identification
      AutoTrac Steering Response Diag. - 8000 Series Field Installed
      AutoTrac Steering Control Unit Identification
      AutoTrac Steering Control Unit Diag - 8000 Series Field Installed
      STARFIRESTARFIRE is a trademark of Deere & Company Receiver w/TCM Diagnostics
      STARFIRESTARFIRE is a trademark of Deere & Company Receiver w/TCM & RTK Diagnostics
      Circuit Code Listing
      Connector Information
   AG MANAGEMENT SOLUTIONS (AMS) -FIELD DOC™
      GREENSTAR™ FIELD DOC™ Diagnostics
      GREENSTAR™ GPS Receiver Identification
      GREENSTAR™ GPS Receiver - L-Band Diagnostics
   POWER SHIFT TRANSMISSION
      Operational Checks
      Tests and Adjustments
      Theory of Operation
      Schematics and Diagrams
   DRIVE SYSTEMS
      Tests and Adjustments
      Theory of Operation
   STEERING AND BRAKES
      Preliminary Checks
      Operational Checks
      Tests And Adjustments
      Theory of Operation
      Schematics and Diagrams
   HYDRAULICS
      Operational Checks
      Tests and Adjustments
      Theory of Operation
      Schematics and Diagrams
   OPERATOR STATION
      Preliminary Checks
      Operational Checks
      Tests and Adjustments
      Theory of Operation
   TOOLS
      Fabricated Tools
      Test Kits

tm1799 - 8110T, 8210T, 8310T and 8410T Tractors

Table of Contents

Foreword

Section 210: GENERAL

Group 05: Safety

Reference 210-05-001 Safety Information

Group 15: General References

Reference 210-15-001, General Reference List

Reference 210-15-002, Bolt and Cap Screw Torque Values

Reference 210-15-003, Glossary of Terms

Reference 210-15-004, JIC Hydraulic Symbols

Reference 210-15-005, Wiring Diagram and Schematic Information

Reference 210-15-006, Electrical Schematic Symbols

Reference 210-15-007, Reading Wiring Schematics and Drawings

Reference 210-15-008, Visually Inspect Electrical System

Reference 210-15-009, Seven Step Electrical Procedure With probe light or multimeter

Reference 210-15-010, Using a Probe Light

Reference 210-15-011, Circuit Types

Reference 210-15-012, Circuit Malfunctions

Reference 210-15-013, Troubleshooting Circuit Malfunctions

Reference 210-15-014, Understanding Electrical vs. Electronic Circuits

Reference 210-15-015, Intermittent Electronic Problems

Reference 210-15-016, Using a Digital Multimeter

Section 220: ENGINE

Group 10: Operational Checks

Reference 220-10-001, Engine Cooling Operational Check

Group 15: Tests and Adjustments

Service Equipment and Tools

Specifications

Reference 220-15-001, Engine Coolant Quality Check

Reference 220-15-002, Radiator and Radiator Cap Test

Reference 220-15-003, Engine Oil Pressure Test

Group 20: Theory of Operation

Reference 220-20-001, Engine Cooling System Operation (8.1L Engine)

Reference 220-20-002, Engine Lubrication System Operation (8.1L Engine)

Section 230: FUEL AND AIR

Group 20: Theory of Operation

Reference 230-20-001, Fuel Supply System Operation (8.1L Engine)

Reference 230-20-002, Air Intake System Theory of Operation

Reference 230-20-003, Turbocharger Operation

Reference 230-20-004, Turbocharger Lubrication

Section 240: ELECTRICAL

Group 15: Tests and Adjustments

Service Equipment and Tools

Specifications

Reference 240-15-001, Charging System Voltage Test

Reference 240-15-002, Internal Alternator Tests

Reference 240-15-003, Battery Inspection

Reference 240-15-004, Lights—Road Position, Low Beam Test (NA)

Reference 240-15-005, Lights—Road Position, High Beam Test (NA)

Reference 240-15-006, Lights—Field 1 Position Test (NA)

Reference 240-15-007, Lights—Field 2 Position Test (NA)

Reference 240-15-008, Lights—Delay Position Test

Reference 240-15-009, Turn Signal Switch Test

Reference 240-15-010, Display Units Power Supply Test

Reference 240-15-011, Lights—Road Position, Low Beam, (Eur)

Reference 240-15-012, Lights—Road Position, High Beam, (Eur)

Reference 240-15-013, Lights—Flood 1 Position, (Eur)

Reference 240-15-014, Lights—Flood 2 Position, (Eur)

Reference 240-15-015, Lights—Park Position, (Eur)

Group 20: Theory of Operation

Reference 240-20-001, List of Theories

Reference 240-20-002, Charging Circuit Theory Of Operation

Reference 240-20-003, Starting Circuit Theory Of Operation

Reference 240-20-004, Convenience Outlet / Auxiliary Power Strip Theory Of Operation

Reference 240-20-005, Vehicle Horn Circuit Theory Of Operation

Reference 240-20-006, Seven Pin Outlet Theory Of Operation

Reference 240-20-007, European Lighting System Theory Of Operation

Reference 240-20-008, Hazard Lights Theory of Operation (Eur)

Reference 240-20-009, Hazard Lights Theory Of Operation (NA)

Reference 240-20-010, Lighting Circuit Theory Of Operation (NA)

Group 25: Schematics and Diagrams

Reference 240-25-001, Tractor Schematic List SE1—SE15

Reference 240-25-001a, SE1- Power, Starting, and Charging, SE2- Wiper and Seat Control, and Lighter Schematic

Reference 240-25-001b, SE3- Air Conditioning and Ventilation, SE4- Radio, Dome lamp and Multi-Function Switch Schematic

Reference 240-25-001c, SE5A- Lighting System (N. A.) Schematic

Reference 240-25-001d, SE5B- Lighting System (European) Schematic

Reference 240-25-001e, SE6- Accessory Connectors, SE7- Hitch / SCV Control Circuits (HCU) Schematic

Reference 240-25-001f, SE8- Central Control Unit / Powershift Control Unit (CCU/PCU) Schematic

Reference 240-25-001g, SE9- Vehicle Monitor (ICU) and SCV Setup Panel (SUP), SE10- Engine Control Unit Schematic

Reference 240-25-001h, SE11- Diagnostic / Program Connector, SE12- Corner Post, Performance Monitor Display, andGREENSTAR GREENSTAR is a trademark of Deere & Company System (Factory Installed) Schematic

Reference 240-25-001i, SE13- SCV 4 and 5 Control Circuits (SCo), SE14- Armrest Control Unit Schematic

Reference 240-25-001j, SE15- Track Steering System Circuits (SSU), SE16- Wagon Tilt Timer Schematic

Reference 240-25-001k, SE17- Implement Ready Harness (Factory Installed), Active Terminator Schematic

Reference 240-25-001l, SE18- GREENSTAR GREENSTAR is a trademark of Deere & Company Cab Harness (Field Installed), Implement Ready Harness (Field Installed) Schematic

Reference 240-25-001m, ClimaTrak™ (ATC) Schematic (—902210)

Reference 240-25-001n, ClimaTrak™ (ATC) Schematic (902211—)

Reference 240-25-002, SE1 Power, Starting and Charging Wiring Diagram

Reference 240-25-003, SE2 Wiper, Seat Control and Lighter Wiring Diagram

Reference 240-25-004a, SE3 Standard Air Conditioning and Ventilation Wiring Diagram (—902210)

Reference 240-25-004b, SE3 Standard Air Conditioning and Ventilation Wiring Diagram (902211—)

Reference 240-25-005, SE4 Radio, Dome Lamp and Multi-Function Switch Wiring Diagram

Reference 240-25-006, SE5A Lighting System (N.A.) Wiring Diagram

Reference 240-25-007, SE5B Lighting System (European) Wiring Diagram

Reference 240-25-008, SE6 Accessory Connectors Wiring Diagram

Reference 240-25-009, SE11 Diagnostic / SERVICE ADVISOR SERVICE ADVISOR is a trademark of Deere & Company Connector Wiring Diagram

Reference 240-25-010, Fuse Panel (N.A.)

Reference 240-25-011, Load Center Relay Panel (N.A.)

Reference 240-25-012, Fuse Panel (European)

Reference 240-25-013, Load Center Relay Panel (European)

Reference 240-25-014, Cab Harness (N. A.)

Reference 240-25-015, Cab Harness (European)

Reference 240-25-016, Cab Connecting Harnesses

Reference 240-25-017, Chassis Harness

Reference 240-25-018, Ground Point Locations

Reference 240-25-019, Harness Connector Locations

Reference 240-25-020, Road Light Switch Operation (NA)

Reference 240-25-021, Combined Road, Turn and Warning Light Switch Operation (NA)

Reference 240-25-022, Road Light Switch Operation (Eur)

Reference 240-25-023, Field Light Switch Operation (Eur)

Reference 240-25-024, SE3 CLIMATRAK (ATC) Air Conditioning and Ventilation Wiring Diagram (902211—)

Reference 240-25-025, SE3 CLIMATRAK (ATC) Air Conditioning and Ventilation Wiring Diagram (—902210)

Section 245: CONTROL UNITS

Group 05: Codes and Addresses

Reference 245-05-001, Recall, Record, and Clear Codes

Reference 245-05-002, Access Control Unit Addresses

Reference 245-05-003 Service Code Descriptions

Reference 245-05-004 Control Unit Addresses

Reference 245-05-005, CCD Network Diagnosis

Reference 245-05-006, CAN Diagnosis

Reference 245-05-007, CCD Schematic

Reference 245-05-008, CAN Schematic

Reference 245-05-200, CCD Communication Network Theory Chrysler Collision Detection. is a method of handling multiple bits of information broadcast on the same communication network at the same time.

Group ACU: ACU References

Specifications

Reference 245-ACU-001, ACU Calibration

Reference 245-ACU-002, ACU Beep Mode Test

Reference 245-ACU-003, Throttle Lever Command Test

Reference 245-ACU-004, Transmission Shift Lever Position Test No. 4

Reference 245-ACU-005, Transmission Shift Lever Position Test No. 5

Reference 245-ACU-006, Transmission Shift Lever Position Test No. 6

Reference 245-ACU-007, Hitch Raise/Lower Rocker Switch Test

Reference 245-ACU-008, Hitch Load/Depth Control Potentiometer Test

Reference 245-ACU-009, Hitch Control Lever Potentiometer Test

Reference 245-ACU-010, Hitch Raise Limit Control Potentiometer Test

Reference 245-ACU-011, Hitch Rate-of-Drop Control Potentiometer Test

Reference 245-ACU-012, SCV Control Switch Test

Reference 245-ACU-017, Rear PTO Switch Test

Reference 245-ACU-019, Operator Presence Switch Test

Reference 245-ACU-024 ACU Configuration Selection

Reference 245-ACU-031, IMS Switch Circuit Test

Reference 245-ACU-032, Automatic Power Shift Switch Circuit Test

Reference 245-ACU-086, ACU Software Version Number

Reference 245-ACU-200, Armrest Control Unit (ACU) Circuit Theory

Reference 245-ACU-300, ACU Wiring Diagram

Group CCU: CCU References

Reference 245-CCU-001, CCU Calibration

Reference 245-CCU-002, CCU BEEP Mode Test

Reference 245-CCU-004M, Engine Speed Sensor Test

Reference 245-CCU-004R, PTO Speed Sensor Test

Reference 245-CCU-005M, Wheel Speed Sensor Test

Reference 245-CCU-007R, Clean Oil Reservoir Level Switch Test

Reference 245-CCU-008, Park Brake Pressure Sensor Test

Reference 245-CCU-009, Rear PTO Switch Test

Reference 245-CCU-010, Hazard Lights Switch Status

Reference 245-CCU-011L, Hydraulic Filter Restriction Switch Test

Reference 245-CCU-011R, Sensor Power Test

Reference 245-CCU-012R, Engine Air Filter Restriction Sensor Test

Reference 245-CCU-013M, Park Brake Sensor Test

Reference 245-CCU-013R, Engine Oil Pressure Sensor Test

Reference 245-CCU-014, Intake Manifold Air Temperature Sensor Test

Reference 245-CCU-015, Foot Throttle Sensor Test

Reference 245-CCU-016, Fuel Level Sensor Test

Reference 245-CCU-017, Hydraulic Oil Temperature Sensor Test

Reference 245-CCU-018, Engine Coolant Temperature Sensor Test

Reference 245-CCU-019, Engine Oil Pressure Sensor Test

Reference 245-CCU-027, Rear PTO Load Contribution

Reference 245-CCU-030, SCV Load Contribution

Reference 245-PCU-036, AB Brake, BC, CC, DC Clutch Pressure Calibration

Reference 245-CCU-200, CCU Theory of Operation

Reference 245-CCU-201, Rear PTO Speed Sensor Theory

Reference 245-CCU-202, Engine Intake Manifold Air Temperature Sensor Theory

Reference 245-CCU-203, Engine Air Filter Restriction Switch Theory

Reference 245-CCU-204, Engine Coolant Temperature Sensor Circuit Theory

Reference 245-CCU-205, Engine Oil Pressure Sensor Circuit Theory

Reference 245-CCU-206, Fuel Level Sensor Circuit Theory

Reference 245-CCU-207, Foot Throttle Position Sensor Theory

Reference 245-CCU-208, Hydraulic Oil Filter Restriction Sensor Circuit Theory

Reference 245-CCU-209, Clean Oil Reservoir Level Switch Circuit Theory

Reference 245-CCU-210, Hydraulic Oil Temperature Sensor Circuit Theory

Reference 245-CCU-211, Radar / Ground Speed Sensor Circuit Theory

Reference 245-CCU-212, Sensor Power Circuit Theory of Operation

Reference 245-CCU-213, Clutch Engage Pressure Sensor Theory

Reference 245-CCU-214, Transmission Oil Pressure Sensors (2) Theory

Reference 245-CCU-215, Wheel Speed Sensor Circuit Theory

Reference 245-CCU-216, Park Brake Sensor Theory

Reference 245-CCU-300, CCU Wiring Diagram

Group GSS: GREENSTAR™ SYSTEMS

Reference 245-GSS-001, Factory GREENSTAR GREENSTAR is a trademark of Deere & Company Cab Harness Unswitched Power Test

Reference 245-GSS-002, Factory GREENSTAR GREENSTAR is a trademark of Deere & Company Cab Harness Switched Power Test

Reference 245-GSS-003, GREENSTAR GREENSTAR is a trademark of Deere & Company CAN Bus Diagnosis

Reference 245-GSS-004, Field GREENSTAR GREENSTAR is a trademark of Deere & Company Cab Harness Unswitched Power Test

Reference 245-GSS-005, Field GREENSTAR GREENSTAR is a trademark of Deere & Company Cab Harness Switched Power Test

Reference 245-GSS-300, Factory GREENSTAR GREENSTAR is a trademark of Deere & Company Cab Harness Wiring Diagram (W90)

Reference 245-GSS-301, GREENSTAR GREENSTAR is a trademark of Deere & Company Factory Implement Ready Harness Wiring Diagram (W91)

Reference 245-GSS-302, Field Installed GREENSTAR GREENSTAR is a trademark of Deere & Company Cab Harness Wiring Diagram (W92)

Reference 245-GSS-303, GREENSTAR GREENSTAR is a trademark of Deere & Company Field Installed Implement Ready Harness Wiring Diagram (W93)

Reference 245-GSS-304, GREENSTAR GREENSTAR is a trademark of Deere & Company Active Terminator Harness Wiring Diagram (W94)

Reference 245-GSS-305, GREENSTAR GREENSTAR is a trademark of Deere & Company Breakaway Terminator Connector Pictorial

Reference 245-GSS-306, GREENSTAR GREENSTAR is a trademark of Deere & Company Harness Routing

Group HCU: HCU References

Specifications

Reference 245-HCU-001, HCU Calibration

Reference 245-HCU-002, HCU Beep Mode Test

Reference 245-HCU-003, Hitch Raise/Lower Rocker Switch Test

Reference 245-HCU-005, Draft Sensor Test

Reference 245-HCU-006, Hitch Load/Depth Control Potentiometer Test

Reference 245-HCU-007, Hitch Control Lever Potentiometer Test

Reference 245-HCU-008, Hitch Position Feedback Sensor Test

Reference 245-HCU-009, Raise Limit Control Potentiometer Test

Reference 245-HCU-010, Rate-of-Drop Control Potentiometer Test

Reference 245-HCU-011, External Raise/Lower Switch Test

Reference 245-HCU-013, Rear Hitch Sensor Supply Voltage Test

Reference 245-HCU-017, Hitch Valve Circuits Test

Reference 245-HCU-018, HCU System Voltage Test

Reference 245-HCU-100, Draft Sensor Adjustment

Reference 245-HCU-200, HCU Theory of Operation

Reference 245-HCU-300, HCU Wiring Diagram (SE7)

Group ICU: ICU References

Reference 245-ICU-001, ICU Calibration

Reference 245-ICU-002, System Diagnostic (“Beep”) Mode (ICU)

Reference 245-ICU-003R, Brake Switch Test

Reference 245-ICU-004L, Secondary Hand Brake Switch Test

Reference 245-ICU-005L, Field Cruise Switch Test

Reference 245-ICU-005M, Interval Wiper Switch Test

Reference 245-ICU-005R, Light Switch Test

Reference 245-ICU-006, Air Brake Pressure Switch Test

Reference 245-ICU-007, Field Cruise Control Potentiometer Test

Reference 245-ICU-200, Instrument Control Unit (ICU) Circuit

Reference 245-ICU-300, ICU Wiring Diagram

Group IMS: Implement Management System (IMS) References

Reference 245-IMS-200, Implement Management System (IMS) Theory Of Operation

Group PCU: PCU References

Reference 245-PCU-001, PCU Calibration

Reference 245-PCU-002, BEEP Mode Test

Reference 245-PCU-005R, Transmission Enable Relay Test

Reference 245-PCU-006R, Forward Enable Relay Test

Reference 245-PCU-007R, Reverse Enable Relay Test

Reference 245-PCU-008R, Not Neutral Relay Test

Reference 245-PCU-010, Clutch Disengaged Switch Test

Reference 245-PCU-011, Clutch Pressure Sensor Test

Reference 245-PCU-014, Clutch Engage Sensor Test

Reference 245-PCU-200, Power Shift Control Unit (PCU) Theory of Operation

Reference 245-PCU-300, Power Shift Control Unit (PCU) Wiring Diagram

Group SCU: SCU References

Essential Tools

Specifications

Reference 245-SCU-001, SCU Calibration

Reference 245-SCU-002, SCU BEEP Mode Test

Reference 245-SCU-004, Implement Option Input Test

Reference 245-SCU-005, Implement Position Feedback Sensor Test

Reference 245-SCU-007, SCV No. 1 Control Potentiometer Test

Reference 245-SCU-008, SCV No. 2 Control Potentiometer Test

Reference 245-SCU-009, SCV No. 3 Control Potentiometer Test

Reference 245-SCU-013, SCV No. 1 Solenoid Command Test

Reference 245-SCU-014, SCV No. 2 Solenoid Command Test

Reference 245-SCU-015, SCV No. 3 Solenoid Command Test

Reference 245-SCU-016, Touchset Depth Control Test

Reference 245-SCU-200, SCU Theory of Operation

Reference 245-SCU-300, SCU Wiring Diagram (SE7)

Group SCo: SCo References

Essential Tools

Specifications

Reference 245-SCo-001, SCo Calibration

Reference 245-SCo-002, SCo Diagnostic “Beep” Mode

Reference 245-SCo-010, SCV No. 4 Control Potentiometer Test

Reference 245-SCo-011, SCV No. 5 Control Potentiometer Test

Reference 245-SCo-016, SCV No. 4 Solenoid Command Test

Reference 245-SCo-017, SCV No. 5 Solenoid Command Test

Reference 245-SCo-200, SCo Theory of Operation

Reference 245-SCo-300, SCo Wiring Diagram (SE13)

Group SSU: SSU References

Specifications

Reference 245-SSU-001, SSU Calibration

Reference 245-SSU-002, System Diagnostic ("Beep") Mode (SSU)

Reference 245-SSU-003, System Voltage Test

Reference 245-SSU-004, Track Pressure Sensor Voltage Test

Reference 245-SSU-005, Steering Wheel Position Sensor Test (Bottom Potentiometer)

Reference 245-SSU-006, Steering Wheel Position Sensor Test (Middle Potentiometer)

Reference 245-SSU-007, Steering Wheel Position Sensor Test (Top Potentiometer)

Reference 245-SSU-008, Steering Angle Display Test

Reference 245-SSU-009, Left Track Pressure Sensor Test

Reference 245-SSU-010, Left Track Pressure Test

Reference 245-SSU-011, Right Track Pressure Sensor Test

Reference 245-SSU-012, Right Track Pressure Test

Reference 245-SSU-013, Motor Shaft Speed/Direction Sensor Voltage Test

Reference 245-SSU-014, Steering Motor Shaft Speed/Direction Sensor Signal Test

Reference 245-SSU-015L, Motor Shaft Speed Sensor Direction Test

Reference 245-SSU-015R, Steering Charge Filter Restriction Switch Test

Reference 245-SSU-016, Clutch Switch Test

Reference 245-SSU-017, Gear Display Test

Reference 245-SSU-018, Wheel Speed Sensor Test

Reference 245-SSU-019, Steering Pump Solenoids Command Test

Reference 245-SSU-029, SSU Programmable Addresses

Reference 245-SSU-030, SSU Calibration Error Codes

Reference 245-SSU-031, AutoTrac Addresses

Reference 245-SSU-200, Steering System Unit (SSU) Theory

Reference 245-SSU-300, SSU Wiring Diagram

Group SUP: SUP References

Reference 245-SUP-002, SUP BEEP Mode Test

Reference 245-SUP-003, Flow Rate Control Knob Test

Reference 245-SUP-004, Detent Time Control Knob Test

Reference 245-SUP-005, SCV Touch Switch Test

Reference 245-SUP-010, Extend and Retract SET Touch Switches Test

Reference 245-SUP-012, SCV Lock Touch Switch Test

Reference 245-SUP-014, SUP Display Segments “ON” Test

Reference 245-SUP-015, SUP Display Segments “OFF” Test

Reference 245-SUP-200, SCV TOUCHSET™ Controls (SUP) Theory of Operation

Reference 245-SUP-300, SUP Circuit Wiring Diagram

Section 246B: AG MANAGEMENT SOLUTIONS (AMS)—JDLINK™

Group 10A: Accessing Diagnostic Addresses and Codes

Reference 246B-10A-001, Accessing Diagnostic Addresses and Codes

Group 10B: Diagnostic Trouble Codes

Reference 246B-10B-001, JdL - JDLINK JDLINK is a trademark of Deere & Company Messenger Diagnostic Trouble Codes

Group 10C: Diagnostic Addresses

Reference 246B-10C-001, Diagnostic Addresses By Controller

Group 15A: JDLINK™ Machine Messenger Diagnostics

Reference 246B-15A-001, JDLINK JDLINK is a trademark of Deere & Company Theory of Operation

Reference 246B-15A-002, Connector Locations

Reference 246B-15A-003, Electrical Schematic (Embedded)

Reference 246B-15A-004, JDLINK JDLINK is a trademark of Deere & Company Machine Messenger Diagnostics (Embedded)

Reference 246B-15A-005, Electrical Schematic (Quick Install)

Reference 246B-15A-006, JDLINK JDLINK is a trademark of Deere & Company Machine Messenger Diagnostics (Quick Install)

Section 246C: AG MANAGEMENT SOLUTIONS (AMS) — AUTOTRAC

Group 5A: How to Use This Diagnostic Information

Reference 246C-5A-001, How to Use This Diagnostic Information

Group 10A: Accessing Diagnostic Addresses and Codes

Reference 246C-10A-001, Accessing Diagnostic Addresses and Codes

Group 10B: Diagnostic Trouble Codes

Reference 246C-10B-001, AutoTrac Messenger Diagnostic Trouble Codes

Group 15A: AutoTrac Identification

Reference 246C-15A-001, 8000 Series Field Installed

Group 15B: AutoTrac Diagnostics - 8000 Series Field Installed

Reference 246C-15B-001, Theory of Operation

Reference 246C-15B-002, Electrical Schematic

Reference 246C-15B-003, AutoTrac System Diagnostics

Group 15C: GREENSTAR™ Parallel Tracking Identification

Reference 246C-15C-001, 8000 Series Field Installed

Group 15D: Parallel Tracking Diagnostics - 8000 Series Field Installed

Reference 246C-15D-001, Theory of Operation

Reference 246C-15D-002, Schematics

Reference 246C-15D-003, GREENSTAR GREENSTAR is a trademark of Deere & Company Parallel Tracking Diagnostics

Group 15E: GREENSTAR™ Display Diagnostics

Reference 246C-15E-001, Theory of Operation

Reference 246C-15E-002, Electrical Schematic

Reference 246C-15E-003, GREENSTAR GREENSTAR is a trademark of Deere & Company Display Diagnostics

Group 15F: GREENSTAR™ Mobile Processor Diagnostics

Reference 246C-15F-001, Theory of Operation

Reference 246C-15F-002, Electrical Schematics

Reference 246C-15F-003, GREENSTAR GREENSTAR is a trademark of Deere & Company Mobile Processor Diagnostics

Group 15G: STARFIRE™ Receiver Diagnostics

Reference 246C-15G-001, Theory of Operation

Reference 246C-15G-002, Electrical Schematic

Reference 246C-15G-003, Type A STARFIRE STARFIRE is a trademark of Deere & Company Receiver Diagnostics

Group 15H: GREENSTAR™ KeyCard Diagnostics

Reference 246C-15H-001, Theory of Operation

Reference 246C-15H-002, Schematics

Reference 246C-15H-003, GREENSTAR GREENSTAR is a trademark of Deere & Company KeyCard and PC Data Storage Card Diagnostics

Group 15I: AutoTrac CAN Bus Identification

Reference 246C-15I-001, 8000 Series Field Installed

Group 15J: AutoTrac CAN Bus Diagnostics - 8000 Series Field Installed

Reference 246C-15J-001, Theory of Operation

Reference 246C-15J-002, Schematics

Reference 246C-15J-003, AutoTrac CAN Bus Diagnostics

Group 15K: AutoTrac CCD Bus Identification

Reference 246C-15K-001, 8000 Series Field Installed

Group 15L: AutoTrac CCD Bus Diagnostics - 8000 Series Field Installed

Reference 246C-15L-001, Theory of Operation

Reference 246C-15L-002, Schematics

Reference 246C-15L-003, AutoTrac CCD Bus Diagnostics

Group 15M: AutoTrac Power Identification

Reference 246C-15M-001, 8000 Series Field Installed

Group 15N: AutoTrac Power Diagnostics - 8000 Series Field Installed

Reference 246C-15N-001, Theory of Operation

Reference 246C-15N-002, Schematics

Reference 246C-15N-003, AutoTrac Power Diagnostics

Group 15O: AutoTrac Status Identification

Reference 246C-15O-001, 8000 Series Field Installed

Group 15P: AutoTrac Status Diagnostics - 8000 Series Field Installed

Reference 246C-15P-001, Theory of Operation

Reference 246C-15P-002, Schematics

Reference 246C-15P-003, AutoTrac Status Diagnostics

Group 15Q: AutoTrac Steering Response Identification

Reference 246C-15Q-001, 8000 Series Field Installed

Group 15R: AutoTrac Steering Response Diag. - 8000 Series Field Installed

Reference 246C-15R-001, Theory of Operation

Reference 246C-15R-002, Schematics

Reference 246C-15R-003, AutoTrac Steering Response Diagnostics

Group 15S: AutoTrac Steering Control Unit Identification

Reference 246C-15S-001, 8000 Series Field Installed

Group 15T: AutoTrac Steering Control Unit Diag - 8000 Series Field Installed

Reference 246C-15T-001, Theory of Operation

Reference 246C-15T-002, Schematics

Reference 246C-15T-003, AutoTrac Steering Control Unit Diagnostics

Group 15U: STARFIRESTARFIRE is a trademark of Deere & Company Receiver w/TCM Diagnostics

Reference 246C-15U-001, Theory of Operation

Reference 246C-15U-002, Electrical Schematic

Reference 246C-15U-003, GPS Position Receiver Diagnostics - Type B

Group 15V: STARFIRESTARFIRE is a trademark of Deere & Company Receiver w/TCM & RTK Diagnostics

Reference 246C-15V-001, Type C STARFIRE STARFIRE is a trademark of Deere & Company Receiver & TCM with RTK Correctional Signal Theory of Operation

Reference 246C-15V-002, Electrical Schematic

Reference 246C-15V-003, STARFIRE STARFIRE is a trademark of Deere & Company Receiver & TCM with RTK Correctional Signal

Group 20A: Circuit Code Listing

Reference 246C-20A-001, Circuit Code Listing

Group 20B: Connector Information

Reference 246C-20B-001, Connector Locations

Reference 246C-20B-002, Connector Information

Section 246D: AG MANAGEMENT SOLUTIONS (AMS) —FIELD DOC™

Group 15A: GREENSTAR™ FIELD DOC™ Diagnostics

Reference 246D-15A-001, Theory of Operation

Reference 246D-15A-002, Schematics

Reference 246D-15A-003, FIELD DOC FIELD DOC is a trademark of Deere & Company Diagnostics

Group 15B: GREENSTAR™ GPS Receiver Identification

Reference 246D-15B-001, GPS Position Receiver Identification- Type A STARFIRE STARFIRE is a trademark of Deere & Company ™ Receiver

Reference 246D-15B-001A, GPS Position Receiver Identification- Type B STARFIRE STARFIRE is a trademark of Deere & Company ™ Receiver & Terrain Compensation Module (TCM)

Reference 246D-15B-001B, GPS Position Receiver Identification - Type C STARFIRE STARFIRE is a trademark of Deere & Company ™ Receiver & TCM with RTK Correctional Signal

Reference 246D-15B-002, L-Band GPS Receiver

Reference 246D-15B-003, Non—John Deere GPS Receiver

Group 15C: GREENSTAR™ GPS Receiver - L-Band Diagnostics

Reference 246D-15C-001, Theory of Operation

Reference 246D-15C-002, Electrical Schematic

Reference 246D-15C-003, GREENSTAR GREENSTAR is a trademark of Deere & Company GPS Receiver - L-Band Diagnostics

Section 250: POWER SHIFT TRANSMISSION

Group 10: Operational Checks

Reference 250-10-001, Park Brake Operational Check

Reference 250-10-002, Transmission Operational Check

Reference 250-10-003, Park Brake Release Valve Operational Check

Group 15: Tests and Adjustments

Specifications

Reference 250-15-001, PTO Calibration

Reference 250-15-002, Park Brake Leak Test

Reference 250-15-003, Transmission (PST) System Pressure Test

Reference 250-15-004, Park Brake and PTO Leak Test

Reference 250-15-005, Park Brake and PTO Pressure Test

Reference 250-15-006, PST Shift Solenoid Valve Test

Reference 250-15-007, PST Element Leak Test

Reference 250-15-008, PCU Shift Valve Circuit Test

Reference 250-15-009, PST Element Pressure Test

Reference 250-15-010, Lube Pressure Test

Reference 250-15-011, Primary Pump Flow Test

Reference 250-15-012, Oil Cooler Relief Valve Test

Reference 250-15-013, Oil Cooler Flow Test

Reference 250-15-014, Lube Valve Checks

Reference 250-15-015, PCU Address 34 Calibration

Reference 250-15-016, PST Stuck Shift Valve Test

Reference 250-15-017, PST Shift Accumulator Test

Reference 250-15-018, Transmission Pressure with Valve Stack Isolated Test

Reference 250-15-100, Transmission System Pressure Adjustment

Reference 250-15-200, Power Shift Transmission Record Sheet

Group 20: Theory of Operation

Reference 250-20-001, List of Power Shift (PST) Transmission Theories

Reference 250-20-002, Transmission Power Flow

Reference 250-20-003, Powershift Transmission (PST) Component Locations

Reference 250-20-004, System 1 Oil

Reference 250-20-005, System 2 Oil

Reference 250-20-006, Power Flow—7th Speed Forward

Reference 250-20-007, Power Flow—2nd Speed Reverse

Reference 250-20-008, Park Position—Engine Running

Reference 250-20-009, Power Shift Transmission (PST)—Neutral

Reference 250-20-010, A-Brake Lube Valve

Reference 250-20-011, Park Brake Release Valve

Reference 250-20-012, Traction Clutch Valve

Reference 250-20-013, Output Clutch Check Valve Orifice

Reference 250-20-014, Lube Cut-Off Valve

Reference 250-20-015, Lube Relief Valve

Reference 250-20-016, Cooler Relief Valve

Reference 250-20-017, Ground Driven Pump

Reference 250-20-018, Ground Speed Park Control Valve

Reference 250-20-019, Scavenge Pump Operation

Reference 250-20-020, Automatic Power Shift Operation

Reference 250-20-021, Transmission Shift Logic

Reference 250-20-022, Selecting Gear

Reference 250-20-023, Transmission Shifting Features

Reference 250-20-024, PST Shifting Characteristics

Reference 250-20-025, Electro-Hydraulic Solenoid Valve Operation

Reference 250-20-026, Analog Shift Valve Operation

Reference 250-20-027, Transmission Diagnostic Codes

Group 25: Schematics and Diagrams

Reference 250-25-001, List of Power Shift (PST) Drawings

Reference 250-25-002, System 1 Oil—JIC Drawing

Reference 250-25-003, System 2 Oil—JIC Drawing

Reference 250-25-004, Park Brake Release Valve—JIC Drawing

Reference 250-25-005, Lube Cut-Off Valve—JIC Drawing

Reference 250-25-006, Lube Relief Valve—JIC Drawing

Reference 250-25-007, Cooler Relief Valve—JIC Drawing

Reference 250-25-008, Ground Speed Park Control Valve—JIC Drawing

Reference 250-25-009, Power Shift (PST) Checkout Forms

Reference 250-25-010, PST Element Engagement Chart

Section 256: DRIVE SYSTEMS

Group 15: Tests and Adjustments

Specifications

Reference 256-15-001, PTO Clutch And Brake Pressure Test

Group 20: Theory of Operation

Reference 256-20-001, List Of PTO Theories

Reference 256-20-002, PTO Clutch Operation

Reference 256-20-003, PTO Solenoid Valve Operation

Reference 256-20-004, Clutch Disengaged—Brake Engaged—Solenoid De-Energized

Reference 256-20-006, Clutch Engaged—Brake Disengaged—Solenoid Energized

Reference 256-20-008, PTO Output Housing Operation

Reference 256-20-009, Standard PTO Output Housing Operation

Reference 256-20-010, Optional PTO Output Housing Operation

Reference 256-20-011, 1000 RPM Output Operation

Reference 256-20-012, 540 RPM Output Operation

Section 260: STEERING AND BRAKES

Group 05: Preliminary Checks

Reference 260-05-001, Steering Preliminary Check

Reference 260-05-002, Brake System Preliminary Check

Group 10: Operational Checks

Reference 260-10-001, Steering Operational Check

Reference 260-10-002, Brake System Operational Test

Reference 260-10-004, AutoTrac Steering System Operational Check

Group 15: Tests And Adjustments

Specifications

Reference 260-15-001, Steering System Leak Test

Reference 260-15-002, Steering Pump Leak Test

Reference 260-15-003, Steering Charge Pump Pressure Test at DR's on Pump

Reference 260-15-004, Steering Charge Pump Pressure Regulating Valve Adjustment

Reference 260-15-005, Steering Charge Pump Flow Test

Reference 260-15-006, Steering System Relief Pressure Test

Reference 260-15-008, Steering Pump Servo Piston Pressure Test

Reference 260-15-009, Displacement Control Valve Neutral Adjustment

Reference 260-15-010, Steering Drift Test

Reference 260-15-011, Displacement Control Valve (DCV) Pressure Check

Reference 260-15-012, Steering Motor Sensor Adjustment

Reference 260-15-014, Steering Motor Differential Pressure Check

Reference 260-15-015, Bleed Brakes

Reference 260-15-016, Manual Brakes Test

Reference 260-15-017, Brake Valve Leakage Test

Reference 260-15-018, Steering Charge Pump Pressure Test At DR's On Motor

Reference 260-15-019, Steering Input Electronic Signal Check

Reference 260-15-021, AutoTrac Steering Accuracy Check

Group 20: Theory of Operation

Reference 260-20-001, List Of Brakes / Steering Theories

Reference 260-20-002, Steering System Theory

Reference 260-20-003, Steering Wheel Position Sensor

Reference 260-20-004, Electronic Displacement Control / Displacement Control Valve

Reference 260-20-005, Steering Pump

Reference 260-20-006, Steering Motor

Reference 260-20-007, Steering Charge Filter

Reference 260-20-008, Brakes Theory of Operation

Reference 260-20-009, Brake Piston Assembly

Group 25: Schematics and Diagrams

Reference 260-25-001, Steering System ISO Diagram

Reference 260-25-002, Brake System ISO Diagram

Section 270: HYDRAULICS

Group 10: Operational Checks

Reference 270-10-001, Hydraulic Operational Check

Reference 270-10-002, Hitch Operational Check

Group 15: Tests and Adjustments

Essential Tools

Service Equipment and Tools

Specifications

Reference 270-15-002, Hydraulic Oil Cooler Pressure Test

Reference 270-15-003, Hitch / SCV Pressures Verification

Reference 270-15-004, Load Sense (Dime Valve) Circuit Leak Test

Reference 270-15-005, Rear Hitch / SCV Valve Leak Test

Reference 270-15-006, SCV Flow Resolution Test

Reference 270-15-007, Secondary Piston Pump Flow Test

Reference 270-15-008, Charge Pump Flow Test

Reference 270-15-009, Charge Pump Suction Air Leak Test

Reference 270-15-010, Secondary Pump Stall / Standby Pressure Test

Reference 270-15-011, Clean Oil Reservoir and Hydraulic Oil Filter Check

Reference 270-15-012, Oil Filter Differential Pressure Check

Reference 270-15-013, Connect Equipment For Hydraulic Testing

Reference 270-15-014, Secondary Pump Test

Reference 270-15-015, SCV-Hitch Shuttle (Dime) Valve Test

Reference 270-15-016, Charge Pump And Clean Oil Reservoir Level Lamp Check

Reference 270-15-017, Oil Cooler, Radiator And Fan Check (CCU Codes 15 or 16)

Reference 270-15-018, Primary Pump Flow Test

Reference 270-15-020, Secondary Pump Flow Check From SCV

Reference 270-15-021, Secondary Pump Load Sense Differential Pressure Check

Reference 270-15-022, Secondary Pump Load Sense Valve Adjustment

Reference 270-15-023, Isolate Leakage In Load Sense (Shuttle Check Valve) Circuit

Reference 270-15-024, Hydraulic System Testing with SCV Blocking Plate

Reference 270-15-025, Secondary Hydraulic Pump Case Drain Leak Check

Reference 270-15-026, Internal Hydraulic Pressure Passage leak Check

Reference 270-15-027, Troubleshooting Optional SCV Software Modes

Reference 270-15-100, Heating Hydraulic Oil

Reference 270-15-101, Pilot Pressure Adjustment—PS Port

Reference 270-15-102, Stall Pressure Adjustment

Reference 270-15-103, Bleed Air from Secondary Hydraulic Lines

Reference 270-15-200, Diagnostic Receptacle (DR) and Port Locations

Group 20: Theory of Operation

Reference 270-20-001, List Of Hydraulic Theories

Reference 270-20-002, Hitch Control Unit (HCU) System

Reference 270-20-003, Hitch Slip Control

Reference 270-20-004, Hitch Dampening

Reference 270-20-005, Tandem Pump

Reference 270-20-006, Hydraulic Oil Filter Assembly

Reference 270-20-007, Secondary Pump

Reference 270-20-008, Selective Control Valve

Reference 270-20-009, Hitch Control Valve

Reference 270-20-010, Load Sense Shuttle System

Group 25: Schematics and Diagrams

Reference 270-25-001, Tractor ISO Diagram List

Reference 270-25-002, Tractor Hydraulic ISO Diagram

Reference 270-25-003, Hitch / SCV System ISO Diagram

Section 290: OPERATOR STATION

Group 05: Preliminary Checks

Reference 290-05-001, Air Flow Preliminary Check (Standard)

Group 10: Operational Checks

Reference 290-10-001, Air Conditioning Operational Checks (Standard)

Reference 290-10-002, Heating System Operational Checks (Standard)

Reference 290-10-003, Operational Check, ClimaTrak ClimaTrak is a trademark of Deere & Company (ATC)

Group 15: Tests and Adjustments

Essential Tools

Specifications

Reference 290-15-001, Install Test Equipment

Reference 290-15-002, Isolate Blower Motor Circuit Malfunctions (Standard)

Reference 290-15-003, Isolate Pressurizer Blower Motor Circuit Malfunction (Standard)

Reference 290-15-004, Static Pressure Test (Standard)

Reference 290-15-005, Isolate Circuit Malfunction to Compressor Clutch (Standard)

Reference 290-15-006, De-Icing Switch Test (Standard)

Reference 290-15-007, Refrigerant Loss Switch (Low Pressure) Test (Standard)

Reference 290-15-008, High Pressure Switch Test (Standard)

Reference 290-15-009, A/C System Testing (Standard)

Reference 290-15-010, ClimaTrak™ (ATC) Light Code Tests

Reference 290-15-011, ClimaTrak™ (ATC) System Testing

Reference 290-15-012, CLIMATRAK CLIMATRAK is a trademark of Deere & Company (ATC) Calibration Procedure (902211—)

Group 20: Theory of Operation

Reference 290-20-001, Air Conditioning Theory of Operation

Reference 290-20-002, Seat Theory Of Operation

Reference 290-20-003, Display Units Theory Of Operation

Reference 290-20-004, Windshield Wiper / Washer Theory Of Operation

Reference 290-20-005, Warning Horn Theory Of Operation

Reference 290-20-006, ClimaTrak™ (ATC) Theory Of Operation

Reference 290-20-007, Cab Air Circulation Theory Of Operation (Standard)

Section 299: TOOLS

Group 10: Fabricated Tools

DFRW2—Needle Valve Test Hose Assembly

DFRW26—Test Lead For Automotive-Style Fuses

DFRW51—Electronic Circuit Load Tester

DFRW60 Through DFRW66—Extension and Tap-Out Harnesses

DFRW123—Steering Motor Bypass Hose

DFRW124—Engine Shut-Off Lead

DFRW126—Tap-Out Harness

DFRW129—Steering Motor Sensor Gage

DFRW130—Relay Circuit Test Lead

DFRW142—Water Valve Test Lead

Group 15: Test Kits

Reference 299-15-001 Test Kits

John Deere Tractors 8110T, 8210T, 8310T, 8410T Diagnosis and Tests Service Technical Manual (TM1799)