Complete Diagnosis & Tests Technical Manual with electrical wiring diagrams for John Deere European Tractors 6215, 6515, with workshop information to maintain, diagnose, and service like professional mechanics.

John Deere 2WD or MFWD Tractors 6215 and 6515 European Models workshop Diagnosis & Tests technical manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

tm4644 - 6215 and 6515 tractors operation and tests and diagnostics - european version Technical Manual.pdf
tm4644 - 6215 and 6515 tractors operation and tests and diagnostics - european version Technical Manual.epub

Total Pages: 1,011 pages
File Format: PDF/EPUB/MOBI/AZW (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English

MAIN SECTIONS
  Foreword
   GENERAL INFORMATION
      Safety Information
      General References
   DIAGNOSTIC TROUBLE CODES
      ECU Diagnostic Codes
   OBSERVABLE SYMPTOMS
      Engine
      Electrical System
      SyncroPlus Transmission
      Power Reverser Transmission
      Drive Systems
      Steering and Brakes
      Hydraulic System
   SYSTEM DIAGNOSTICS
      Electronics
   ENGINE
      Operational Check-Out
      Test and Adjustments
   FUEL, AIR INTAKE AND COOLING SYSTEMS
      Test and Adjustments
      Operation
   ELECTRICAL SYSTEM
      Sub-System Diagnostics
      Component Testing
      Functional Schematics
      Summary of Wiring Harnesses
      Wiring Harnesses
   ELECTRONIC CONTROL UNITS
      Operation and General Information on Diagnostics
      Data BUS Systems, Theory of Operation
      ECU - Engine Control Unit
   SYNCROPLUS TRANSMISSION
      Introductory Checks
      Operational Check-Out
      Test and Adjustments
      Operation
   POWER REVERSER TRANSMISSION
      Operational Check-Out
      Test and Adjustments
      Operation
   DRIVE SYSTEMS
      Operational Check-Out
      Test and Adjustments
      Operation
   STEERING AND BRAKES
      Operational Check-Out
      Test and Adjustments
      Operation
   HYDRAULIC SYSTEM
      Operational Check-Out
      Test and Adjustments
      Operation
   SPECIAL TOOLS
      Special Tools (Dealer-Fabricated)
      Special Tools and Test Equipment

tm4644 - 6215 and 6515 tractors operation and tests and diagnostics - european version - Table of Contents

Foreword

Section 210: GENERAL INFORMATION

Group 05: Safety Information

Recognize Safety Information

”Important” Information

”Note” Information

Prevent Machine Runaway

Handle Fluids Safely-Avoid Fires

Prevent Battery Explosions

Prepare for Emergencies

Prevent Acid Burns

Avoid High-Pressure Fluids

Service Cooling System Safely

Remove Paint Before Welding or Heating

Avoid Heating Near Pressurized Fluid Lines

Work In Ventilated Area

Wear Protective Clothing

Practice Safe Maintenance

Park Machine Safely

Use Proper Lifting Equipment

Construct Dealer-Made Tools Safely

Support Machine Properly

Work in Clean Area

Illuminate Work Area Safely

Service Machines Safely

Use Proper Tools

Service Tires Safely

Service Front-Wheel Drive Tractor Safely

Safety Information - Air Brake System

Avoid Eye Contact With Radar

Keep ROPS Installed Properly

Replace Safety Signs

Dispose of Waste Properly

Live With Safety

Safety Measures on Electronic Control Units

Group 15: General References

210-15-001, General References-Summary

Reference 210-15-010, Unified Inch Bolt and Cap Screw Torque Values

Reference 210-15-015, Metric Bolt and Cap Screw Torque Values

210-15-020, Hydraulic System Inch Fitting Torques

210-15-025, Hydraulic System Metric Fitting Torques

210-15-030, Component Identification Table

Reference 210-15-035, How to Read a Functional Schematic

210-15-040, How to Read a Diagnostic Schematic

210-15-042, Wire Numbers and Color Codes

210-15-045, Schematic, Wiring and Harness Symbols

210-15-050, Visual Check of the Electrical System

Reference 210-15-055, Electrical Circuit Malfunctions

Reference 210-15-060, Seven Step Electrical Test Procedure

210-15-065, Hydraulic System - Circuit Symbols

Section 211: DIAGNOSTIC TROUBLE CODES

Group ECU: ECU Diagnostic Codes

ECU 000028.03-Cruise Control Potentiometer, Shorted Circuit

ECU 000028.04-Cruise Control Potentiometer, Grounded or Open Circuit

ECU 000029.03-Hand Throttle Potentiometer, Shorted Circuit

ECU 000029.04-Hand Throttle Potentiometer, Grounded or Open Circuit

ECU 000091.03 -Accelerator Pedal Potentiometer, Shorted Circuit

ECU 000091.04-Accelerator Pedal Potentiometer, Grounded or Open Circuit

ECU 000097.03-Water Separator Sender, Shorted or Open Circuit

ECU 000097.04-Water Separator Sender, Short to Ground

ECU 000097.16-Water in Fuel Detected

ECU 000105.03-Intake Air Temperature Sender, Shorted or Open Circuit

ECU 000105.04-Intake Air Temperature Sender, Short to Ground

ECU 000105.16-Air Temperature in Intake Manifold is Moderately High

ECU 000110.00-Coolant Temperature Very High

ECU 000110.03-Coolant Temperature Sender, Shorted or Open Circuit

ECU 000110.04-Coolant Temperature Sender, Short to Ground

ECU 000110.15-Coolant Temperature Slightly High

ECU 000110.16-Coolant Temperature High

ECU 000158.17-ECU Power Down Error

ECU 000174.03-Fuel Temperature Sender, Shorted or Open Circuit

ECU 000174.04-Fuel Temperature Sender, Short to Ground

ECU 000174.16-Fuel Temperature Slightly High

ECU 000190.00-Engine Racing Excessively

ECU 000190.16-Engine Racing Slightly

ECU 000620.03-Sensor Supply Voltage Too High

ECU 000620.04-Sensor Supply Voltage Too Low

ECU 000629.13-Control Unit Connected to Wrong Wiring Harness Connector

ECU 000637.02-Crankshaft Speed Sender, Signal Distorted

ECU 000637.10-Crankshaft Speed Sender, Signal Faulty

ECU 000729.03-Heater Relay for Electrical Starting Aid, Shorted Circuit

ECU 000729.05-Heater Relay for Electrical Starting Aid, Open Circuit

ECU 001076.00-Injection Pump Solenoid Valve Closed Too Long

ECU 001076.01-Injection Pump Solenoid Valve Opened Too Briefly

ECU 001076.03-Injection Pump Solenoid Valve, Excessively High Current Regulation

ECU 001076.05-Solenoid Valve of Injection Pump, Open Circuit

ECU 001076.06-Solenoid Valve of Injection Pump, Grounded Circuit

ECU 001076.07-Status of Injection Pump Solenoid Valve Cannot Be Determined

ECU 001076.10-Solenoid Valve of Injection Pump, Shorted Circuit

ECU 001569.31-Fuel Derate

ECU 002000.06-Control Unit, Internal Fault

Section 212: OBSERVABLE SYMPTOMS

Group 20: Engine

Engine Observable Symptom Diagnostics

Group 40: Electrical System

Engine Control Unit not Displayed or Connection Problems with Service ADVISOR (Tractors with Stage II Engines according to 97/68/EC; Level 12)

Problem with the Battery

Problem with the Worklights

Problem with the Starting Motor

Problem with the Horn

Problem with the Turn Signals

Problem with the Hazard Warning Lights

Problem with Brake Lights

Problem with the Headlights

Problem with the Instrument Unit

Problem with Cold-Weather Starting Aid

Problem with the Electrical Starting Aid

Group 50: SyncroPlus Transmission

Problem with SyncroPlus Transmission

Group 51: Power Reverser Transmission

Problem with Power Reverser

Group 56: Drive Systems

Problem with the Rear PTO

Problem with the Front-Wheel Drive

Problem with the Differential Lock

Group 60: Steering and Brakes

Problem with the Brakes

Problem with the Steering

Problem with the Handbrake

Group 70: Hydraulic System

Problem with the Rockshaft

Section 213: SYSTEM DIAGNOSTICS

Group 45: Electronics

29-bit CAN BUS - Check (Tractors with Stage II Engines according to 97/68/EC; Level 12)

Section 220: ENGINE

Group 10: Operational Check-Out

Reference 220-10-010, Safety

220-10-020, Preliminary Engine Tests

Group 15: Test and Adjustments

Reference 220-15-001, Tests and Adjustments - Summary of References

220-15-010, Dynamometer Test

Reference 220-15-020, Measuring PTO Power Output

Reference 220-15-030, Engine Tests with Service ADVISOR

Section 230: FUEL, AIR INTAKE AND COOLING SYSTEMS

Group 15: Test and Adjustments

Reference 230-15-001, Tests and Adjustments - Summary of References

Reference 230-15-010, General Information

Reference 230-15-020, Explanation of Checks

Reference 230-15-030, Safety

Reference 230-15-040, Special Tools

Reference 230-15-050, Specifications

Reference 230-15-060, Testing the Air Intake System

Reference 230-15-070, Check Cooling System for Leaks

Reference 230-15-075, Flow-Testing in the Low-Temperature Circuit

Reference 230-15-080, Testing the Temperature at which the Thermostat opens

Reference 230-15-090, Checking the Viscous Fan Drive

Reference 230-15-100, Check Fuel Transfer Pump

Reference 230-15-110, Hand Throttle Lever and Accelerator Pedal Adjustment

Group 20: Operation

Reference 230-20-001, Component Description - Summary of References

Reference 230-20-010, Fuel System - Description

Reference 230-20-020, Air Intake System - Theory of Operation

Reference 230-20-030, Coolant Circuit - Description

Reference 230-20-040, Cooling System Radiator - Description

Reference 230-20-050, Intercooler - Description

Reference 230-20-060, Ring-Shaped (Transmission Oil) Cooler - Description

Reference 230-20-070, Viscous Fan Drive - Theory of Operation

Reference 230-20-080, Automatic Drive Belt Tensioner - Theory of Operation

Reference 230-20-020, Cold Weather Starting Aids - Theory of Operation

Section 240: ELECTRICAL SYSTEM

Group 10: Sub-System Diagnostics

Reference 240-10-001, Electrical Circuit Tests - Summary of References

Reference 240-10-002, Special Tools

Reference 240-10-003, SE1-Starting Motor and Charging Circuit

Reference 240-10-004, SE2 - Instrument Unit

Reference 240-10-005, SE3 - Horn

Reference 240-10-006, SE6 - Lights

Reference 240-10-007, SE7-Worklights

Reference 240-10-008, SE14-3- and 7-Terminal Power Outlet Sockets

Reference 240-10-009, SE16A-Hazard Warning and Turn-Signal Lights

Reference 240-10-010, SE16C-Brake Lights

Reference 240-10-011, SE16D-Differential Lock

Reference 240-10-012, SE16E-Front-Wheel Drive

Reference 240-10-013, SE17-Service Socket

Reference 240-10-014, SE23 - Electronic Engine Control

Group 15: Component Testing

Reference 240-15-001, SE1-Starting Motor and Charging Circuit

Reference 240-15-002, SE2 - Instrument Unit

Reference 240-15-003, SE03 - Horn

Reference 240-15-004, SE6-Lights

Reference 240-15-005, SE7 - Worklights

Reference 240-15-006, SE14 - 3- and 7-Terminal Power Outlet Sockets

Reference 240-15-007, SE16A - Hazard Warning and Turn Signal Lights

Reference 240-15-008, SE16C - Brake Lights

Reference 240-15-009, SE16D-Differential Lock

Reference 240-15-010, SE16E - Front-Wheel Drive

Reference 240-15-011, SE17 - Service Socket

Reference 240-15-012, SE23 - Electronic Engine Control

Group 25: Functional Schematics

Reference 240-25-001, Circuit Diagram - Summary of References

Reference 240-25-002, Fuses and Relays

Reference 240-25-003, Designation of Parts Shown in Functional Schematic and Harness Diagram

Reference 240-25-004, Designation of Sections Shown in Functional Schematic

Reference 240-25-005, Wiring Harness Designations

Reference 240-25-006, Functional Schematic (Complete Tractor)

Group 26: Summary of Wiring Harnesses

Reference 240-26-001, Wiring Harnesses for Tractors without Engine Control Unit (ECU) - Summary of References

Reference 240-26-501, Wiring Harnesses for Tractors with Level 12 Engine Control Unit (ECU) up to Serial Number 381790 - Summary of References.

Reference 240-26-502, Wiring Harnesses for Tractors with Level 12 Engine Control Unit (ECU) and Noise Reduction from Serial Number 381791 - Summary of References

Group 26A: Wiring Harnesses

Reference 240-26-011, W01 - Wiring Harness - Power Supply

Reference 240-26-021, W02 - Wiring Harness - Engine for Tractors without Engine Control Unit

Reference 240-26-521, W02 - Wiring Harness - Engine for Tractors with Engine Control Unit (Level 12 ECU)

Reference 240-26-031, W03 - Wiring Harness - Starting Aid

240-26-041, W04 - Wiring Harness - Headlights

240-26-051, W05 - Wiring Harness - Worklights on Front Corner

Reference 240-26-081, W08 - Wiring Harness - Open Operator's Station (Tractors without Engine Control Unit)

Reference 240-26-581, W08 - Wiring Harness - Open Operator's Station, Tractors with Engine Control Unit (ECU) Level 12 (up to Serial No. 381790)

Reference 240-26-582, W08 - Wiring Harness - Open Operator's Station, Tractors with Engine Control Unit (ECU) Level 12 (from Serial No. 381791)

Reference 240-26-091, W09 - Wiring Harness - Cowl (Tractors without Engine Control Unit)

Reference 240-26-591, W09 - Wiring Harness - Cowl, for Tractors with Engine Control Unit (ECU Level 12)

Reference 240-26-141, W14 - Wiring Harness - 3-Terminal Power Outlet Socket

Reference 240-26-281, W28 - Wiring Harness - Front End of Transmission

Reference 240-26-301, W30 - Wiring Harness - Rear End of Transmission

Reference 240-26-302, W30 - Wiring Harness - Rear End of Transmission (Tractors with Noise Reduction from Serial Number 381791)

Reference 240-26-311, W31 - Wiring Harness - 7-Terminal Power Outlet Socket

Section 245: ELECTRONIC CONTROL UNITS

Group 05: Operation and General Information on Diagnostics

Special Tools

Reference 245-05-001, General Operation and Entering the Program Mode

Reference 245-05-002, Accessing Addresses and Diagnostic Trouble Codes

Reference 245-05-004, Electronic Control Units - Summary of Addresses

Group 20: Data BUS Systems, Theory of Operation

Reference 245-20-001, Data BUS Systems - Summary of References

Reference 245-20-002, Data-BUS Systems

Reference 245-20-003, Operation of the CAN BUS System

Reference 245-20-011, CAN-BUS Systems on Tractors with Engine Control Unit (ECU) Level12

Group ECU: ECU - Engine Control Unit

Reference 245-ECU-001, Calibration and Input Addresses

Reference 245-ECU-100, Diagnosis of Electrical Circuits for Level 12 Engine Control Unit (ECU)

Reference 245-ECU-204, Theory of Operation (Stage II Engines to 97/68/EC; Level 12)

Section 250: SYNCROPLUS TRANSMISSION

Group 05: Introductory Checks

Reference 250-05-001, Introductory Checks for Transmission and Hydraulic Diagnosis

Group 10: Operational Check-Out

Reference 250-10-001, SyncroPlus Transmission-Operational Check-Out

Group 15: Test and Adjustments

Reference 250-15-001, SyncroPlus Transmission-System Check

Reference 250-15-002, SyncroPlus Transmission-System Pressure Check

Reference 250-15-003, SyncroPlus Transmission-System Pressure Adjustment

Reference 250-15-004, SyncroPlus Transmission-Check Components Dependent on System Pressure

Reference 250-15-005, SyncroPlus Transmission-Checking the Filter Relief Valve

Reference 250-15-006, SyncroPlus Transmission-Check Engagement Override Valve and Clutch Pedal Valve

Reference 250-15-007, SyncroPlus Transmission-Checking the Modulation of the Clutch Pedal Valve

Reference 250-15-008, SyncroPlus Transmission-Checking the Lube Oil Pressure

Reference 250-15-009, SyncroPlus Transmission-Checking the Cooling System

Reference 250-15-010, SyncroPlus Transmission-Checking the Rate of Flow

Reference 250-15-011, SyncroPlus Transmission-Checking the Cooler Relief Valve

Reference 250-15-012, SyncroPlus Transmission-Checking the Transmission Oil Filter

Reference 250-15-013, SyncroPlus Transmission-Layout of Test Ports and Sending Units

Reference 250-15-014, SyncroPlus Transmission-Check and Adjust Shift Units

Reference 250-15-015, SyncroPlus Transmission-Park Lock Adjustment

Reference 250-15-016, SyncroPlus Transmission-Checking and Adjusting the Linkage on the Range Transmission

Reference 250-15-017, SyncroPlus Transmission-Checking and Adjusting the Linkage on the Gear Transmission

Reference 250-15-018, SyncroPlus Transmission-Checking and Adjusting the Neutral Start Switch

Reference 250-15-019, SyncroPlus Transmission-Clutch Pedal Adjustment

Group 20: Operation

Reference 250-20-001, SyncroPlus Transmission - Summary of References

Reference 250-20-010, SyncroPlus Transmission-Layout

Reference 250-20-020, SyncroPlus Transmission-Lubrication System

Reference 250-20-030, SyncroPlus Transmission-Shift Linkage

Reference 250-20-040, Syncroplus Transmission-Synchronization

Reference 250-20-050, SyncroPlus Transmission-Operation of Transmission Oil Circuit (including Diagram)

Reference 250-20-100, Perma Clutch II Module-Exploded View

Reference 250-20-110, Perma Clutch II Module-Layout

Reference 250-20-120, Perma Clutch II Module-Powerflow

Reference 250-20-130, Perma Clutch II Module-Transmission Oil Pump

Reference 250-20-140, Perma Clutch II Module-Hydraulic Circuit Diagram

Reference 250-20-150, Perma Clutch II Module-Description of Various Valves and Components

Reference 250-20-160, Perma Clutch II Module-Operation of Pressure Regulating Valve and Filter Relief Valve

Reference 250-20-170, Perma Clutch II Module-Operation of Clutch Pedal Valve and Engagement Override Valve

Reference 250-20-180, Perma Clutch II Module-Operation of Cooling System

Reference 250-20-200, Gear Transmission- Layout

Reference 250-20-210, Gear Transmission- Power Flow

Reference 250-20-220, Gear Transmission- Neutral Start Switch

Reference 250-20-500 - Range Transmission, Layout

Reference 250-20-510 - Range Transmission, Power Flow

Reference 250-20-520 - Range Transmission, Park Lock

Section 251: POWER REVERSER TRANSMISSION

Group 10: Operational Check-Out

Reference 251-10-001, Power Reverser Transmission-Operational Check-Out

Group 15: Test and Adjustments

Reference 251-15-001, Power Reverser Transmission-System Check

Reference 251-15-002, Power Reverser Transmission-Checking System Pressure

Reference 251-15-003, Power Reverser Transmission-System Pressure Adjustment

Reference 251-15-004, Power Reverser Transmission-Checking Components Dependent on System Pressure

Reference 251-15-005, Power Reverser Transmission-Checking the Filter Relief Valve

Reference 251-15-006, Power Reverser Transmission-Checking and Adjusting the Engagement Override Valve and Clutch Pedal Valve

Reference 251-15-007, Power Reverser Transmission-Checking the Disk Clutch and Disk Brake

Reference 251-15-008, Power Reverser Transmission-Checking the Lube Oil Pressure

Reference 251-15-009, Power Reverser Transmission-Checking the Cooling System

Reference 251-15-010, Power Reverser Transmission-Checking the Rate of Flow

Reference 251-15-011, Power Reverser Transmission-Checking the Cooler Relief Valve

Reference 251-15-012, Power Reverser Transmission-Checking the Transmission Oil Filter

Reference 251-15-013, Power Reverser Transmission-Adjusting the Modulation Time

Reference 251-15-014, Power Reverser Transmission-Layout of Test Ports and Sending Units

Reference 251-15-015, Power Reverser Transmission-Check and Adjust Shift Units

Reference 251-15-016, Power Reverser Transmission-Adjust the Park Lock

Reference 251-15-017, Power Reverser Transmission-Checking and Adjusting the Linkage on the Range Transmission

Reference 251-15-018, Power Reverser Transmission-Checking and Adjusting the Linkage on the Gear Transmission

Reference 251-15-019, Power Reverser Transmission-Adjusting the Reverse Drive Linkage

Reference 251-15-020, Power Reverser Transmission-Adjust the Reverse Drive Lever

Reference 251-15-021, Power Reverser Transmission-Adjust the Clutch Pedal

Group 20: Operation

Reference 251-20-001, Power Reverser Transmission - Summary of References

Reference 251-20-010, Power Reverser Transmission-Layout

Reference 251-20-020, Power Reverser Transmission-Lubrication System

Reference 251-20-030, Power Reverser Transmission-Shift Linkage

Reference 251-20-040, Power Reverser Transmission-Synchronization

Reference 251-20-050, Power Reverser Transmission-Operation of Transmission Oil Circuit (including Diagram)

Reference 251-20-100, Power Reverser Module-Sectional View

Reference 251-20-110, Power Reverser Module-Components

Reference 251-20-120, Power Reverser Module-Layout and Powerflow

Reference 251-20-130, Power Reverser Module-Transmission Oil Pump

Reference 251-20-140, Power Reverser Module-Valves and Other Hydraulic Components

Reference 251-20-150, Power Reverser Module-Hydraulic Circuit Diagram

Reference 251-20-160, Power Reverser Module-Description of Various Valves and Components

Reference 251-20-170, Power Reverser Module-Operation of Pressure Regulating Valve and Filter Relief Valve

Reference 251-20-180, Power Reverser Module-Operation of Forward/Reverse Modulation

Reference 251-20-190, Power Reverser Module-Operation of Clutch Pedal Valve

Reference 251-20-200, Power Reverser Module-Operation of Engagement Override Valve

Reference 251-20-210, Power Reverser Module-Operation of Cooling System

Reference 251-20-300-Gear Transmission, Layout and Powerflow

Reference 251-20-500-Range Transmission, Layout

Reference 251-20-510-Range Transmission, Powerflow

Reference 251-20-520-Range Transmission, Park Lock

Section 256: DRIVE SYSTEMS

Group 10: Operational Check-Out

Reference 256-10-001, Drive Systems-Operational Check

Group 15: Test and Adjustments

Reference 256-15-001, Drive Systems-System Check

Reference 256-15-002, Check Pressure at the Front-Wheel Drive Clutch

Reference 256-15-003, Check Pressure at the Hydraulic Differential Lock

Reference 256-15-004, Check Pressure at the Rear PTO

Reference 256-15-006, Drive Systems-Test Result Table

Group 20: Operation

Reference 256-20-001, Drive Systems - Summary of References

Reference 256-20-100, Front-Wheel Drive Clutch-Layout

Reference 256-20-110, Front-Wheel Drive Clutch-Oil and Power Flows with Front-Wheel Drive Engaged

Reference 256-20-120, Oil and Power Flows with Front-Wheel Drive Disengaged

Reference 256-20-130, Front-Wheel Drive Clutch-Cooling and Lubrication

Reference 256-20-200, Differential-Layout

Reference 256-20-210, Differential-Power-Flow when Travelling Straight Ahead

Reference 256-20-220, Differential-Power-Flow when Cornering

Reference 256-20-230, Differential-Oil-Flow with Differential Lock Engaged

Reference 256-20-240, Differential-Oil-Flow with Differential Lock Disengaged

Reference 256-20-300, Final Drives-Operation and Layout

Reference 256-20-400, Rear PTO-Description

Reference 256-20-410, Rear PTO-Modulating Valve with Lever Detent

Reference 256-20-420, Rear PTO-PTO Clutch and PTO Brake

Reference 256-20-430, Rear PTO-Power-Flow (540 rpm PTO Gear Train)

Reference 256-20-440, Rear PTO-Power-Flow (540/1000 rpm PTO Gear Train, Reversible)

Section 260: STEERING AND BRAKES

Group 10: Operational Check-Out

Reference 260-10-001, Safety Information

Reference 260-10-010, Steering Check

Reference 260-10-020, Brake Check

Group 15: Test and Adjustments

Reference 260-15-001, Tests and Adjustments - Summary of References

Reference 260-15-010, Special Tools

Reference 260-15-030, Specifications

Reference 260-15-040, Steering Valve Check

Reference 260-15-050, Checking the Brake System

Reference 260-15-070, Adjust the Brake Pedals and Switches

Reference 260-15-080, Handbrake Checks

Reference 260-15-090, Check the Trailer Brake Valve

Reference 260-15-100, Adjusting the Trailer Brake Valve

Group 20: Operation

Reference 260-20-001, Operation - Summary of References

Reference 260-20-010, Description of Steering Valves, Operation

Reference 260-20-030, Brake Valve, Description

Reference 260-20-040, Rear Wheel Brakes, Operation

Reference 260-20-050, Handbrake, Description

Reference 260-20-060, Trailer Brake Valve, Description

Section 270: HYDRAULIC SYSTEM

Group 10: Operational Check-Out

Reference 270-10-001, Hydraulic System - Operational Check

Group 15: Test and Adjustments

Reference 270-15-001, Safety Measures for Hydraulic Checks

Reference 270-15-010, Heating Up Hydraulic Oil

Reference 270-15-020, Hydraulic System - Oil Pressure Testing Points

Reference 270-15-030, Checking the Hydraulic System

Reference 270-15-040, Hydraulic System - Test Result Table

Reference 270-15-050, Hydraulic System - Test and Adjust the System Oil Pressure

Reference 270-15-060, Hydraulic System - Test the LS Oil Pressure at the Steering Valve

Reference 270-15-061, Hydraulic System - Test the LS Oil Pressure at the Trailer Brake Valve

Reference 270-15-070, Hydraulic System - Check the Steering Oil Pressure

Reference 270-15-080, Hydraulic System - Check Lube Oil Pressure

Reference 270-15-090, Hydraulic Pump - Check the Delivery Rate

Reference 270-15-100, Selective Control Valves - Check for Leaks at Valve Spools

Reference 270-15-110, Rockshaft Valve - Check and Adjust Pressure Relief Valve

Reference 270-15-120, Rockshaft Valve - Checking for Leaks

Reference 270-15-130, Check and Adjust Rockshaft Control

Reference 270-15-140, Rockshaft - Control Lever Friction Adjustment

Group 20: Operation

Reference 270-20-001, Hydraulic System - Summary of References

Reference 270-20-010, Hydraulic System - Description

Reference 270-20-020, Hydraulic System - Operation

Reference 270-20-030, Hydraulic System - Symbolic View

Reference 270-20-040, Hydraulic System - Schematic View

Reference 270-20-050, Hydraulic System - Three-Dimensional View

Reference 270-20-060, Hydraulic System - Description of Hydraulic Pump

Reference 270-20-070, Hydraulic System - Operation of Hydraulic Pump

Reference 270-20-080, Primary Hydraulic Oil Filter - Description

Reference 270-20-090, Hydraulic Oil Cooler - Description

Reference 270-20-100, Hydraulic System - Description of Hydraulic Oil Filter

Reference 270-20-110, Hydraulic System - Lube Priority Valve

Reference 270-20-120, Hydraulic System - Operation of Priority Valve

Reference 270-20-130, Rockshaft - Description

Reference 270-20-140, Rockshaft - Operation of Rockshaft Control

Reference 270-20-150, Rockshaft - Operation of Rockshaft Control Valve

Reference 270-20-160, Selective Control Valves - Description

Reference 270-20-170, Selective Control Valves - Operation

Reference 270-20-180, Couplers - Description

Section 299: SPECIAL TOOLS

Group 05: Special Tools (Dealer-Fabricated)

Reference 299-05-010, Holding Tool

Reference 299-05-016, DFLX14-Solenoid Valve Test Harness

Group 10: Special Tools and Test Equipment

Accessory Kit JDH43A

Clamp-on Current Probe JT02153

JT05470 Universal Pressure Test Kit

Pressure Gauge JT05473

JT05791A - Multimeter

Temperature Measuring Unit JT05800

JT07115 - Pressure test kit

Adjustable Restrictor JT07120

Battery Load Tester FKM10409

FKM10470 - Pressure Measuring System (stage 1)

FKM10472 - Flow measurement system

Adjusting Tool FKM10475

John Deere European Tractors 6215, 6515 Diagnosis and Tests Service Technical Manual (TM4644)