Complete service repair manual with Electrical Wiring Diagrams for John Deere Trailed Crop Sprayers Models 724, 732, 740, 724i, 732i, 740i with ELC-1/EHC-2 Control Unit/with EL-4 Control Unit, with all the workshop information to maintain, diagnose, repair, and rebuild like professional mechanics.

John Deere Trailed Crop Sprayers 724, 724i, 732, 732i, 740, 740i workshop service repair manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM402919 - John Deere Trailed Crop Sprayers 724, 724i, 732, 732i, 740, 740i Technical Manual (Operation_Tests_Repair_Service).PDF

Total Pages: 921 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable, high quality)
Language: English

MAIN SECTIONS
Electrical System
      Connector Repair
      Sensors
   Brake System
      Hydraulic Brake System
      Pneumatic Brake System
   Hydraulic System
      Hydraulic Functions
      Hydraulic Cylinders
      Control Valves
      Accumulator
   Frame and Spray Boom
      Welding and Repair
      Spray Boom
      Center Frame
      Axle
      Drawbar
      Parallelogram
      Adjustments
   Tanks and Accessories
      Solution Tank
      Rinse Tank
      Hand Wash Tank
      Polyethylene Tank Repair
   Pump
      Pump
   Lines and Valves
      Spray Line
   Activation Systems
      Flow Meter
      Ball Valves
      Regulating Unit
   Spray Nozzles
      Spray Nozzles
   Diagnostic Trouble Codes with GreenStar Sprayer Control
      SPC Codes
   Observable Symptoms
      Electrical Symptoms
      Brake Symptoms
      Hydraulic Symptoms
      Solution System Symptoms
   Electrical Diagnosis and Tests
      Accessing Diagnostic Codes and Addresses
      Diagnostic Trouble Codes
      Diagnostic Addresses
      Connector Information
   Brake System Diagnostics
      General Information
      Hydraulic Brake System
      Pneumatic Braking System
      Hydraulic Brakes 700 Schematic
   Hydraulic Diagnosis and Tests
      EL-4 Hydac Hydraulics V3 700 Schematic
      EHB-1/EHB-2 700 Schematic
      EHB-1/EHB-2/ISOBUS - Hydraulic Connections 700 Schematic
      Folding/Unfolding SCV 2 Part Folding Boom Schematic
      EHS-1 2 Part Folding Boom Schematic
      EHS-1 3 Part Folding Boom
      EHB-2 3 Part Folding Boom Schematic
      Independent Yaw Suspension 700 Schematic
      EHB-1/EHB-2 2 Part Folding Boom 700 Hydac Hydraulic Schematic
      EHB-2 3 Part Folding Boom 700 Hydac Hydraulic Schematic
      Component Location
   Solution System
      Solution System without Ring Line
      Solution System with Ring Line
      AutoDilute System

tm402919 - 724, 732, 740, 724i, 732i, and 740i Trailed Crop Sprayers with ELC-1/EHC-2 Control Unit/with EL-4 Control Unit

Table of Contents

Foreword

Section 05: Safety

Group 05: Safety Information

Admissible Use

Recognize Safety Information

Understand Signal Words

Keep Riders Off Machine

Prepare for Emergencies

Use Safety Lights and Devices

Work in Clean Area

Chemical Safety

Handle Agricultural Chemicals Safely

Service and Operate Chemical Sprayers Safely

Danger Symbols

Mechanical Safety

Non-Permissible Use

Operators

Working Area

Wear Protective Clothing

Wear Protective Clothing

Illuminate Work Area Safely

Respiratory Protection

Skin Protection

Maintenance of Means of Personal Protection

Tractor Cab

Use Proper Lifting Equipment

Safety During Maintenance Work

Avoid High-Pressure Fluids

Service Accumulator Systems Safely

Service Tires Safely

Avoid Heating Near Pressurized Fluid Lines

Use Proper Tools

Construct Dealer-Made Tools Safely

Service Machines Safely

Remove Paint Before Welding or Heating

Servicing Electronic Control Units

Welding Near Electronic Control Units

Keep Electronic Control Unit Connectors Clean

General Machine Operation Safety

Transport in the Field and on the Road

Operate Safely

Live With Safety

Section 10: General Information

Group 05: Description of the Machine

Identification Views

Machine Composition

Group 10: Torques for Hardware

Unified Inch Bolt and Screw Torque Values

Metric Bolt and Screw Torque Values

Metric Stainless Steel Bolt and Screw Torque Values

Group 15: Specifications

Capacities

Dimensions and Weights

Sound Level

Electrical Connection Requirements

Products to be Processed

Materials Used

Physical Operating Conditions

Lubricant Storage

Section 40: Electrical System

Group 05: Connector Repair

Essential or Recommended Tools

Electrical Connector Handling

Disconnecting Electrical Circuit

Connector Information

Repair Procedure R-A

Repair Procedure R-B

Repair Procedure R-C

Repair Procedure R-E

Repair Procedure R-F

Repair Procedure R-I

Repair Procedure R-AA

Repair Procedure R-AE

Repair Procedure R-AM

Repair Procedure R-AN

Repair Procedure R-AO

Repair Procedure R-AP

Repair Procedure R-AQ

Group 10: Sensors

Specifications

Remove and Install Automatic Tracking System Sensor (Steering Drawbar)

Remove and Install Center Position Sensors (Steering Drawbar)

Remove and Install Flow Sensor

Remove and Install Digital Level Indicator Sensor

Remove and Install Digital Level Indicator Alarm

Remove and Install Solution Pressure Sensor

Remove and Install Wheel Speed Sensor

Remove and Install Spray Boom Transport Lock Switch

Remove and Install Spray Boom Position Switch

Remove and Install Spray Boom Suspension Sensor

Section 60: Brake System

Group 05: Hydraulic Brake System

Hydraulic Brake System (Not for Germany)

Remove and Install Parking Brake Operating Assembly

Remove and Install Tension Cable Disk

Remove and Install Tension Cable

Adjust Parking Brake

Group 10: Pneumatic Brake System

Public Roads

Replace Coupling

Clean/Replace Line Filter Strainer

Replace Release Valve

Replace Brake Power Regulator

Replace Brake Valve

Replace Quick Release Valve or Switch Valve

Replace Shut-Off Valve

Replace Compressed Air Storage Tank

Replace Brake Cylinder

Section 70: Hydraulic System

Group 05: Hydraulic Functions

General Information

Group 10: Hydraulic Cylinders

Essential or Recommended Tools

Other Material

Specifications

Remove and Install Hydraulic Brake Cylinder

Disassemble and Assemble Hydraulic Brake Cylinder

Remove and Install Secondary Fold Cylinder

Disassemble and Assemble Secondary Fold Cylinder

Remove and Install Height Adjustment Cylinders

Remove and Install Pendulum Lock Cylinder

Disassemble and Assemble Pendulum Lock Cylinder

Remove and Install Boom Fold Cylinder

Remove and Install Spray Boom Tilt Cylinder

Remove and Install Drawbar Steering Cylinder

Disassemble and Assemble Boom Fold, Boom Tilt, and Drawbar Steering Cylinders

Remove and Install Variable Geometry Cylinder

Disassemble and Assemble Variable Geometry Cylinder

Disassemble and Assemble Hydraulic Fluid Pressure Restrictor Assembly

Group 15: Control Valves

Specifications

Avoid High-Pressure Fluids

General Repair Information

Disassemble and Assemble Load Sensing Flow Control Valve

Disassemble and Assemble Hydraulic Valve Stack (Double Folding Boom)

Disassemble and Assemble Hydraulic Valve Stack (Triple Folding Boom)

Group 20: Accumulator

Other Material

Specifications

Remove and Install Hydraulic Distributor with Accumulator

Disassemble and Assemble Hydraulic Distributor with Accumulator

Section 80: Frame and Spray Boom

Group 05: Welding and Repair

Unauthorized Modifications

Frame Repair

Welding

Emergency Crack Repair

Emergency ”T” Joint Repair

Skip Welding

Stress Relief (Normalizing)

Group 10: Spray Boom

Prepare Sprayer for Service of Spray Boom

Remove and Install Breakaway Section

Remove and Install Breakaway Section Tension Spring

Remove and Install Outer Spray Boom Section

Remove and Install Inner Spray Boom Section or Complete Spray Boom (On One Side)

Remove and Install Center Spray Boom Frame

Remove and Install Spray Boom Hinge

Remove and Install Spindle

Remove and Install Pressure Roll for Breakaway Section

Remove and Install Spray Boom Transport Lock

Remove and Install Spray Boom Transport Support and Roll

Remove and Install Spray Boom Transport Bracket

Group 15: Center Frame

Remove and Install Center Attaching Frame

Remove and Install Protection Plates

Remove and Install Shock Absorber (Center Attaching Frame)

Remove and Install Shock Absorber (Anti-Yaw)

Remove and Install Anti-Yaw Shock Absorber Arm

Remove and Install Anti-Yaw Dampener

Remove and Install Center Frame Roll (Front)

Remove and Install Center Frame Roll (Rear)

Remove and Install Spray Boom Suspension Springs

Remove and Install Pendulum Lock

Group 20: Axle

Other Material

Specifications

Remove and Install Axle Assembly (Adjustable)

Remove and Install Adjustable Axle

Remove and Install Extension Spring

Remove and Install Brake Shoes and Camshaft (Adjustable Axle)

Remove and Install Camshaft Support (Adjustable Axle)

Remove and Install Roller Bearings (Wheel Hub)

Remove and Install Brake Drum or Back-Up Ring

Amount of Grease For Each Wheel Hub

Inspect Brake Drum, Brake Shoes, and Brake Linings

Group 25: Drawbar

Other Material

Specifications

Remove and Install Steering Drawbar

Remove and Install Tow Eye

Remove and Install Connecting Bracket (Steering Drawbar)

Group 30: Parallelogram

Other Material

Remove and Install Parallelogram Arm (Top)

Remove and Install Parallelogram Arm (Bottom)

Remove and Install Parallelogram Vertical Lift Arm

Remove and Install Parallelogram Lift Arm

Remove and Install Isolators

Group 35: Adjustments

Specifications

Adjust Automatic Tracking System With Steering Drawbar

Adjust Steering Cylinder Speed

Adjust Spray Boom Transport Position

Adjust Spray Boom Alignment

Balance Spray Boom

Track Width Adjustment With Sliding Axle

Adjust Anti-Yaw System

Adjust Spray Boom Suspension

Adjust Center Position of Steering Drawbar

Section 100: Tanks and Accessories

Group 05: Solution Tank

Cleaning the Machine

Processing Residual Liquids with EL-4

Processing Residual Liquids with Ring Line Circulation and EL-4

Processing Residual Liquids with EHC-2

Processing Residual Liquids with Ring Line Circulation and EHC-2

Processing Residual Liquids with MFC

Processing Residual Liquids with Ring Line Circulation and MFC

Remove and Install Solution Tank

Remove and Install Solution Tank Lid

Disassemble and Assemble Solution Tank Lid

Remove and Install Solution Tank Breather Valve

Remove and Install Solution Tank Lid Adapter

Remove and Install Drain Valve

Disassemble and Assemble Drain Valve

Remove and Install Solution Tank Level Indicator

Remove and Install Solution Tank Rinsing Nozzle

Remove and Install Injectors for Agitation

Group 10: Rinse Tank

Remove and Install Rinse Tank

Remove and Install Rinse Tank Breather Vent

Remove and Install Rinse Tank Quick Coupler Assembly

Group 15: Hand Wash Tank

Remove and Install Hand Wash Tank

Remove and Install Hand Wash Tank Bleed Valve

Group 20: Polyethylene Tank Repair

Essential or Recommended Tools

Repair Polyethylene Plastic

Install RIVNUT RIVNUT is a registered trademark of RIVNUT Engineered Products Inc. Threaded Inserts

Section 110: Pump

Group 05: Pump

Other Material

Specifications

Remove and Install Pump

Disassemble and Assemble Pump

Remove and Install Pump Oil Seal

Disassemble and Assemble Pump Accumulator

Section 120: Lines and Valves

Group 05: Spray Line

Remove and Install Spray Line Valve

Disassemble and Assemble Spray Line Valve

Section 130: Activation Systems

Group 05: Flow Meter

Remove and Install Flow Meter

Disassemble and Assemble Flow Meter

Group 10: Ball Valves

Remove and Install Protective Cap on Left-Hand Side

Remove and Install External Pump Filling Control Valve

Disassemble and Assemble External Pump Filling Control Valve

Remove and Install Pressure Selection Valve

Disassemble and Assemble Pressure Selection Valve

Remove and Install Suction Valve

Disassemble and Assemble Suction Valve

Remove and Install Injector Shut-Off Valve

Disassemble and Assemble Injector Shut-Off Valve

Remove and Install Ring Line Circulation Valve

Disassemble and Assemble Ring Line Circulation Valve

Group 15: Regulating Unit

Remove and Install Primary Pressure Regulator

Disassemble and Assemble Primary Pressure Regulator

Remove and Install Pressure Regulator

Disassemble and Assemble Pressure Regulator

Remove and Install Suction Filter

Remove and Install Pressure Filter

Remove and Install Circulation Valve

Disassemble and Assemble Circulation Valve

Section 140: Spray Nozzles

Group 05: Spray Nozzles

Remove and Install Nozzle Holder (5-Way)

Disassemble and Assemble Nozzle Holder (5-Way)

Remove and Install Nozzle Holder (Single)

Disassemble and Assemble Nozzle Holder (Single)

Remove and Install Spray Nozzle Solenoid

Section 211: Diagnostic Trouble Codes with GreenStar Sprayer Control

Group 01: SPC Codes

SPC 002128.09 - Connection To Virtual Terminal Lost

SPC 002160.09 - Connection To EPM1 Lost

SPC 002161.09 - Connection To EPM2 Lost

SPC 002162.09 - Connection To EPM3 Lost

SPC 002163.09 - Connection To EPM4 Lost

SPC 002205.09 - Connection To BoomTrac Lost

SPC 002394.05 - Working Light Open Load

SPC 002394.06 - Working Light Short To Ground

SPC 520195.05 - Master Water Valve Open Load

SPC 520195.06 - Master Water Valve Short To Ground

SPC 520197.02 - Controller ID Failure

SPC 520300.02 - Left BoomTrac Sensor Out of Range

SPC 520301.02 - Right BoomTrac Sensor Out of Range

SPC 520401.05 - OC Solenoid Open Load

SPC 520401.06 - OC Solenoid Short To Ground

SPC 520402.05 - Pendulum Lock On Open Load

SPC 520402.06 - Pendulum Lock On Short To Ground

SPC 520403.05 - Pendulum Lock Off Open Load

SPC 520403.06 - Pendulum Lock Off Short To Ground

SPC 520503.05 - Right Outer Nozzle Open Load

SPC 520503.06 - Right Outer Nozzle Short To Ground

SPC 520504.05 - Left Outer Nozzle Open Load

SPC 520504.06 - Left Outer Nozzle Short To Ground

SPC 520601.05 - Free Function Open Load

SPC 520601.06 - Free Function Short To Ground

SPC 520704.00 - Pump 1 Oil Level High

SPC 520704.01 - Pump 1 Oil Level Low

SPC 521101.05 - High Side 6 EPM1 Open Load

SPC 521101.06 - High Side 6 EPM1 Short To Ground

SPC 521200.05 - High Side 3 EPM opt Open Load

SPC 521200.06 - High Side 3 EPM opt Short To Ground

SPC 521201.05 - High Side 4 EPM opt Open Load

SPC 521201.06 - High Side 4 EPM opt Short To Ground

SPC 521202.05 - High Side 6 EPM opt Open Load

SPC 521202.06 - High Side 6 EPM opt Short To Ground

SPC 523382.05 - Agitation Open Load

SPC 523382.06 - Agitation Short To Ground

SPC 523409.05 - Drawbar Right Open Load

SPC 523409.06 - Drawbar Right Short To Ground

SPC 523410.05 - Drawbar Left Open Load

SPC 523410.06 - Drawbar Left Short To Ground

SPC 523411.05 - Height Adjustment UP Open Load

SPC 523411.06 - Height Adjustment UP Short To Ground

SPC 523412.05 - Boom Tilt Left Open Load

SPC 523412.06 - Boom Tilt Left Short To Ground

SPC 523413.05 - Boom Tilt Right Open Load

SPC 523413.06 - Boom Tilt Right Short To Ground

SPC 523414.05 - Height Adjustment Down Open Load

SPC 523414.06 - Height Adjustment Down Short To Ground

SPC 523417.05 - LS Solenoid Open Load

SPC 523417.06 - LS Solenoid Short To Ground

SPC 523418.05 - Horn Open Load

SPC 523418.06 - Horn Short To Ground

SPC 523422.05 - Center Section Valve Open Load

SPC 523422.06 - Center Section Valve Short To Ground

SPC 523423.05 - Right Fence-Edge Spray Nozzle Open Load

SPC 523423.06 - Right Fence-Edge Spray Nozzle Short To Ground

SPC 523432.05 - Section Water Valve R4 Open Load

SPC 523432.06 - Section Water Valve R4 Short To Ground

SPC 523434.05 - Section Water Valve R3 Open Load

SPC 523434.06 - Section Water Valve R3 Short To Ground

SPC 523435.05 - Section Water Valve R2 Open Load

SPC 523435.06 - Section Water Valve R2 Short To Ground

SPC 523439.05 - Section Water Valve R1 Open Load

SPC 523439.06 - Section Water Valve R1 Short To Ground

SPC 523443.05 - Left Fence-Edge Spray Nozzle Open Load

SPC 523443.06 - Left Fence-Edge Spray Nozzle Short To Ground

SPC 523450.05 - Section Water Valve L4 Open Load

SPC 523450.06 - Section Water Valve L4 Short To Ground

SPC 523452.05 - Section Water Valve L3 Open

SPC 523452.06 - Section Water Valve L3 Short To Ground

SPC 523453.05 - Section Water Valve L2 Open Load

SPC 523453.06 - Section Water Valve L2 Short To Ground

SPC 523454.05 - Section Water Valve L1 Open Load

SPC 523454.06 - Section Water Valve L1 Short To Ground

SPC 523465.05 - Boom Fold Tip Left Out Open Load

SPC 523465.06 - Boom Fold Tip Left Out Short To Ground

SPC 523466.05 - Boom Fold Tip Left In Open Load

SPC 523466.06 - Boom Fold Tip Left In Short To Ground

SPC 523467.05 - Boom Fold Left In Open Load

SPC 523467.06 - Boom Fold Left In Short To Ground

SPC 523468.05 - Boom Fold Left Out Open Load

SPC 523468.06 - Boom Fold Left Out Short To Ground

SPC 523469.05 - Boom Fold Right Out Open Load

SPC 523469.06 - Boom Fold Right Out Short To Ground

SPC 523470.05 - Boom Fold Right In Open Load

SPC 523470.06 - Boom Fold Right In Short To Ground

SPC 523471.05 - Boom Fold Tip Right In Open Load

SPC 523471.06 - Boom Fold Tip Right In Short To Ground

SPC 523472.05 - Boom Fold Tip Right Out Open Load

SPC 523472.06 - Boom Fold Tip Right Out Short To Ground

SPC 523479.05 - Variable Geometry Left Down Open Load

SPC 523479.06 - Variable Geometry Left Down Short To Ground

SPC 523480.05 - Variable Geometry Right Down Open Load

SPC 523480.06 - Variable Geometry Right Down Short To Ground

SPC 523481.05 - Variable Geometry Left Up Open Load

SPC 523481.06 - Variable Geometry Left Up Short To Ground

SPC 523482.05 - Variable Geometry Right Up Open Load

SPC 523482.06 - Variable Geometry Right Up Short To Ground

Section 212: Observable Symptoms

Group 01: Electrical Symptoms

Agitation

Boom Fold

Boom Raise and Lower

Boom Tilt

BoomTrac

Boom Variable Geometry

CAN Bus

Control Unit Power — EPM

Control Unit Power — SPC

Hydraulic System Type

Lights — Work

Multifunction Control Lever

Power Distribution

Ring Line System

Solution Pressure

Solution Pump Oil Level

Solution System Auto-Dilute

Spray Rate Control

Spray Valve Control

Tank Water Level

Wheel Speed

Group 02: Brake Symptoms

Hydraulic Brake Diagnostics

Pneumatic Brakes Diagnostics

Group 03: Hydraulic Symptoms

Overall Hydraulics

Auto-Dilute Hydraulic System

Boom Fold Hydraulic System

Boom Pendulum Lock Hydraulic System

Boom Raise Hydraulic System

Boom Tilt Hydraulic System

Boom Variable Geometry Hydraulic System

Drawbar Steering Hydraulic System

Hydraulic System Type

Group 04: Solution System Symptoms

Solution System Diagnostics

Section 240: Electrical Diagnosis and Tests

Group 05A: General Information

How to Use the Electrical Diagnostic Section

Electrical Schematic Symbols

Intermittent Fault Diagnostics

Programming Control Units

Group 05B: Component Identification

Electrical Component Identification Legend

Fuses

Group 10A: Accessing Diagnostic Codes and Addresses

Accessing GREENSTAR 2 Diagnostic Trouble Codes

Accessing GREENSTAR 2 Diagnostic Addresses

Technician Mode Procedure

GreenStar Display Screen Capture and Debug Files

Group 10B: Diagnostic Trouble Codes

SPC Codes

Group 10C: Diagnostic Addresses

SPC Addresses

Group 10D: System Overview Schematics

System Overview ISOBUS 700i Schematic

Group 15A: Agitation

Agitation Theory of Operation 700i Series

Agitation Schematic 700i Series

Group 15B: Boom Fold

Boom Fold Theory of Operation 700i Series

Boom Fold Schematic 700i Series

Group 15C: Boom Raise and Lower

Boom Raise and Lower Theory of Operation 700i Series

Boom Raise and Lower Schematic 700i Series

Group 15D: Boom Tilt

Boom Tilt Theory of Operation 700i Series

Boom Tilt Schematic 700i Series

Group 15E: BoomTrac

BoomTrac Theory of Operation

BoomTrac Schematic

Group 15F: Boom Variable Geometry

Boom Variable Geometry Theory of Operation 700i Series

Boom Variable Geometry Schematic 700i Series

Group 15G: CAN Bus

CAN Bus Theory of Operation

CAN Bus Schematic

Group 15H: Control Unit Power — EPM

EPM Power Theory of Operation

EPM and BoomTrac Control Unit Power Schematic

Group 15I: Control Unit Power — SPC

SPC Power Theory of Operation

SPC Power Schematic

Group 15J: Drawbar Steering

Drawbar Steering Theory of Operation 700i Series

Drawbar Steering Schematic 700i Series

Group 15K: Hydraulic System Type

Hydraulic System Type Electrical Theory of Operation 700i Series

Hydraulic System Type Electrical Schematic 700i Series

Group 15L: Lights — Public Road Travel

Public Road Travel Lights Theory of Operation

Public Road Travel Lights Schematic

Public Road Travel Lights Schematic — Denmark

Public Road Travel Lights Schematic — France

Group 15M: Lights — Work 700i Series

Work Lights Theory of Operation

Work Lights Schematic

Group 15N: Multi-Function Control Lever

Multi-Function Control Lever Theory of Operation

Multi-Function Control Lever Schematic

Group 15O: Power Distribution 700i Series

Power Distribution Theory of Operation

Power Distribution Schematic

Group 15P: Solution Pressure 700i Series

Solution Pressure Theory of Operation

Solution Pressure Schematic

Group 15Q: Solution Pump Oil Level 700i Series

Solution Pump Oil Level Theory of Operation

Solution Pump Oil Level Schematic

Group 15R: Solution System AutoDilute 700i Series

AutoDilute Theory of Operation

AutoDilute Schematic

Group 15S: Spray Rate Control 700i Series

Spray Rate Control Theory of Operation

Spray Rate Control Schematic

Group 15T: Spray Valve Control 700i Series

Spray Valve Control Theory of Operation

Spray Valve Control Schematic

Group 15U: Tank Water Level 700i Series

Water Level Theory of Operation

Water Level Schematic

Group 15V: Wheel Speed 700i Series

Wheel Speed Theory of Operation

Wheel Speed Schematic

Group 15W: Power Supply 3 Pole Cobo Connector Schematic

Power Supply 3 Pole Cobo Connector Schematic

Group 15X: EL-4 Connection 700 V3 Schematic

EL-4 Connection 700 V3 Schematic

Group 15Y: EL-4 + Tankmatic Connection Schematic

EL-4 + Tankmatic Connection Schematic

Group 15Z: EL-4 + Tankmatic Connection V2 Schematic

EL-4 + Tankmatic Connection V2 Schematic

Group 15AA: EHS-1 for 3 Part Folding Boom Connection Schematic

EHS-1 for 3 Part Folding Boom Connection Schematic

Group 15AB: EL-4 + Off Center Nozzle Valves Connection Schematic 700

EL-4 + Off Center Nozzle Valves Connection Schematic 700

Group 15AC: Update to B-Motor Schematic

Update to B-Motor Schematic

Group 15AD: EL-4 + Independent Yaw Suspension Connection Schematic 700

EL-4 + Independent Yaw Suspension Connection Schematic 700

Group 15AE: EHB-1 700 Hydac Wiring Harness

EHB-1 700 Hydac Wiring Harness

Group 15AF: EHB-1 700 TFI Wiring Harness

EHB-1 700 TFI Wiring Harness

Group 15AG: EHB-2 700 TFI Wiring Harness

EHB-2 700 TFI Wiring Harness

Group 15AH: EHB-2 700 with Variable Geometry Hydac Wiring Harness

EHB-2 700 with Variable Geometry Hydac Wiring Harness

Group 15AI: EHB-2 700 without Variable Geometry Hydac Wiring Harness

EHB-2 700 without Variable Geometry Hydac Wiring Harness

Group 15AJ: EHS-1 700 Wiring Harness

EHS-1 700 Wiring Harness

Group 15AK: EHS-1 700 TFI Wiring Harness

EHS-1 700 TFI Wiring Harness

Group 15AL: EL-4 and Digital Tank Display Setup

EL-4 and Digital Tank Display Setup

Group 15AM: Cable/Wire List for 700 with EL-4 Wiring Harness

Cable/Wire List for 700 with EL-4

Group 15AN: EL-4 Main Board

EL-4 Main Board

Group 15AO: EHB2 / EHB1 Hydraulics Auxiliary Connector

EHB2 / EHB1 Hydraulics Auxiliary Connector

Group 15AP: EHS1 Auxiliary Connector

EHS1 Auxiliary Connector

Group 20: Connector Information

X001F - Connector Switchbox

X002F - Connector Switchbox

X101M - ISOBUS Connector

X102F - Sensor Drawbar Rear

X103F - Sensor Drawbar Front

X104F - Oil Level Sensor

X106F - Open Center or Load Sense Hydraulic Solenoid

X107F - Tank Filling Horn

X108F - Master Water Valve - Standard

X109F - Pressure Regulator (Water)

X111F - Master Water Valve - Ringline

X112F - Tank Level Pressure Sensor

X113F - Agitation Valve

X114F - Sensor Drawbar Right

X115F - Sensor Drawbar Left

X116F - Wheel Speed Sensor

X118F - Boom In Sensor

X119F - Boom Tilt Sensor

X120F-1 SPC Connector A

X120F-2 SPC Connector B

X120F-3 SPC Connector C

X121F-1 EPM1 Base

X121F-2 EPM Base

X121F-3 - EPM Base

X123F - Edge Nozzle Left

X124F - Outer Nozzle Left

X126F - Edge Nozzle Right

X127F - Outer Nozzle Right

X131F - Section R4

X132F - Section R3

X133F - Section R2

X134F - Section R1

X135F - Section C

X136F - Section L1

X137F - Section L2

X138F - Section L3

X139F - Section L4

X144F - Water Pressure Sensor

X145F - Flow Sensor

X146F - Free Function

X147F - Working Light

X149F - Terminator Harness

X151F - CAN Bus

X153F - Fuse Box

X154F - CAN Bus EPM4 Harness

X155F - BoomTrac GND

X156F - Boom On Transport

X157F - Pressure Switch

X158F - Lock Valve

X160F-1 EPM Hydraulics 1

X160F-2 EPM Hydraulics 1

X160F-3 EPM Hydraulics 1

X161F-1 EPM Hydraulics 2

X161F-2 EPM Hydraulics 2

X161F-3 EPM Hydraulics 2

X162M - CAN Bus

X163 - Fuse Box

X164F - Drawbar Left

X165F - VG Left Up

X166F - VG Right Up

X167F - Fold Boom In 2

X168F - Fold Tip Left In

X169F - Fold Tip Right In

X170F - Fold Boom In 1

X171F - Lock On

X172F - Boom Tilt Right

X173F - Boom Up

X175F - Drawbar Right

X176F - VG Left Down

X177F - VG Right Down

X178F - Fold Boom Out

X179F - Fold Tip Left Out

X180F - Fold Tip Right Out

X181F - Fold Boom Out 1

X182F - Lock Off

X183F - Boom Tilt Left

X184F - Boom Down

X185M - BoomTrac Boom Tilt GND

X200F-1 EPM4 Option

X200F-2 EPM4 Option

X200F-3 EPM4 Option

X201M - CAN Bus

X202 - Fuse Box

X203 - Left Hand Work Light

X204 - Right Hand Work Light

X208 - Dilution Pump

X240 - Terminator Harness

X241F - Passive Terminator

X250M - CAN Bus In

X251F - CAN Bus Out

X252 - Fuse Box

X253 - Hydraulic Function BoomTrac

X254F - Sensor Left

X255F - Sensor Right

X256F-3 - BoomTrac Control Unit

X257F - Boom Tilt

X500 - Fuse Box

X501 - Fuse Box

X502 - Ground Block

X503 - Ground Block

X525 - Tractor Implement 7- Pin Connector

X526 - Left Tail and Stop Light

X527 - Right Tail and Stop Light

X528 - Left Front Marker Harness

X529 - Right Front Marker Harness

X530 - Left Front Marker

X531 - Right Front Marker

X532 - Left Tail Light Extension Harness

X533 - Right Tail Light Extension Harness

X534 - Left Side Marker Harness

X535 - Right Side Marker Harness

X536 - Left Side Marker Light 1

X537 - Left Side Marker Light 2

X538 - Left Side Marker Light 3

X539 - Left Side Marker Light 4

X540 - Right Side Marker Light 1

X541 - Right Side Marker Light 2

X542 - Right Side Marker Light 3

X543 - Right Side Marker Light 4

X544 - Left Rear Marker Light

X545 - Right Rear Marker Light

X546 - Left Rear Marker Harness

X547 - Right Rear Marker Harness

X900 - Tractor - Implement Connector

X901 - Tractor Cab Harness

X903 - Cab Harness to Display Harness

X910 - Greenstar 2 Display

X911 - Tractor Ground Point - Pin 1

X912 - Tractor Ground Point - Pin 2

X913 - Tractor Switched Power - Pin 3

X914 - Tractor Switched Power - Pin 4

X915 - CAN Bus Power

X916 - CAN Bus Ground

X917 - Ground Point to Multi-function Control Lever

X918 - Switched Power to Multi-function Control Lever

X919 - Unswitched Power to Multi-function Control Lever

X920 - Tractor 7 - Pin Connector

Section 260: Brake System Diagnostics

Group 05: General Information

Brake System Component Identification

Group 15A: Hydraulic Brake System

Hydraulic Braking System Theory of Operation

Hydraulic Braking System Schematic

Group 15B: Pneumatic Braking System

Pneumatic Braking System Theory of Operation

Pneumatic Braking System Schematic

Group 15C: Hydraulic Brakes 700 Schematic

Hydraulic brakes 700 Schematic

Section 270: Hydraulic Diagnosis and Tests

Group 05: General Information

Hydraulic System Component Identification

Group 15A: Overall Hydraulic System

Overall Hydraulic System Theory of Operation

Overall Hydraulic System Schematic

Group 15B: AutoDilute Hydraulic System

AutoDilute Hydraulic Theory of Operation

AutoDilute Hydraulic Schematic

Group 15C: Boom Fold Hydraulic System

Boom Fold Hydraulic Theory of Operation

Boom Fold Hydraulic Schematic

Group 15D: Boom Pendulum Lock Hydraulic System

Boom Pendulum Lock Hydraulic Theory of Operation

Boom Pendulum Lock Schematic

Group 15E: Boom Raise Hydraulic System

Boom Raise Hydraulic Theory of Operation

Boom Raise Hydraulic Schematic

Group 15F: Boom Tilt Hydraulic System

Boom Tilt Hydraulic Theory of Operation

Boom Tilt Hydraulic Schematic

Group 15G: Boom Variable Geometry Hydraulic System

Boom Variable Geometry Hydraulic Theory of Operation

Boom Variable Geometry Hydraulic Schematic

Group 15H: Drawbar Steering Hydraulic System

Drawbar Steering Hydraulic Theory of Operation

Drawbar Steering Hydraulic Schematic

Group 15I: Hydraulic System Type

Hydraulic System Type Theory of Operation

Hydraulic System Type Schematic

Group 15J: EL-4 Hydac Hydraulics V3 700 Schematic

EL-4 Hydac Hydraulics V3 700 Schematic

Group 15K: EHB-1/EHB-2 700 Schematic

EHB-1/EHB-2 700 Schematic

Group 15L: EHB-1/EHB-2/ISOBUS - Hydraulic Connections 700 Schematic

EHB-1/EHB-2/ISOBUS - Hydraulic Connections 700 Schematic

Group 15M: Folding/Unfolding SCV 2 Part Folding Boom Schematic

Folding/Unfolding SCV 2 Part Folding Boom Schematic

Group 15N: EHS-1 2 Part Folding Boom Schematic

EHS-1 2 Part Folding Boom Schematic

Group 15O: EHS-1 3 Part Folding Boom

EHS-1 3 Part Folding Boom Schematic

Group 15P: EHB-2 3 Part Folding Boom Schematic

EHB-2 3 Part Folding Boom Schematic

Group 15Q: Independent Yaw Suspension 700 Schematic

Independent Yaw Suspension 700 Schematic

Group 15R: EHB-1/EHB-2 2 Part Folding Boom 700 Hydac Hydraulic Schematic

EHB-1/EHB-2 2 Part Folding Boom 700 Hydac Hydraulic Schematic

Group 15S: EHB-2 3 Part Folding Boom 700 Hydac Hydraulic Schematic

EHB-2 3 Part Folding Boom 700 Hydac Hydraulic Schematic

Group 20: Component Location

A01 — Boom Raise Accumulator

C01 — Left Lift Cylinder

C02 — Right Lift Cylinder

C03 — Drawbar Steering Cylinder (Single)

C04 — Left Drawbar Steering Cylinder

C05 — Right Drawbar Steering Cylinder

C06 — Boom Tilt Cylinder

C07 — Pendulum Lock Cylinder

C08 — Left Inner Boom Cylinder

C09 — Right Inner Boom Cylinder

C10 — Left Middle Boom Cylinder (3-Part Boom)

C11 — Right Middle Boom Cylinder (3-Part Boom)

C12 — Left Boom Tip Cylinder

C13 — Right Boom Tip Cylinder

C14 — Left Variable Geometry Boom Cylinder

C15 — Right Variable Geometry Boom Cylinder

D02, D04, D06, D08, D10, D14, D16, D18, D20, D22 — ”A” Port Check Valves

D07, D09, D13, D15, D17, D19, D21 — ”B' Port Check Valves

D01, D03, D05, D07 — ”B” Port Check Valves

D26 — Hydraulic System Pressure Coupler

D27 — Hydraulic System Return Coupler

D28 — Hydraulic System Load Sense Coupler

F01 — Filter

G01 — Flow Divider Valve Block

G03 — Drawbar Steering Variable Restrictor (Optional)

G04 — Drawbar Steering Variable Restrictor (Optional)

G05 — Left Wing Variable Geometry Flow Restrictor

G06 — Left Wing Variable Geometry Flow Restrictor

G07 — Right Wing Variable Geometry Flow Restrictor

G08 — Right Wing Variable Geometry Flow Restrictor

G10 — Boom Control Valve Assembly

M01 — AutoDilute Motor

O1 — Hydraulic System Orifice

O2 — Lift Orifice

O3, O4 — Drawbar Steering Orifices (Single Cylinder)

O5, O6 — Drawbar Steering Orifices (Dual Cylinder)

O7 — Boom Tilt Orifice

O8 — Boom Tilt Orifice

O9 — Pendulum Lock Orifice

O10 — Pendulum Lock Orifice

O11 — Inner Boom Fold 1 Orifice

O12 — Inner Boom Fold 1 Orifice

O13 — Inner Boom Fold 1 Orifice

O14 — Inner Boom Fold 1 Orifice

O15 — Inner Boom Fold 2 Orifice (3-Part Boom)

O16 — Inner Boom Fold 2 Orifice (3-Part Boom)

O17 — Inner Boom Fold 2 Orifice (3-Part Boom)

O18 — Inner Boom Fold 2 Orifice (3-Part Boom)

O19 — Left Tip Fold Orifice

O20 — Left Tip Fold Orifice

O21 — Right Tip Fold Orifice

O22 — Right Tip Fold Orifice

O23 — Load Sense Orifice

V01 — Pressure Relief Valve

V02 — Load Sense Bleed Valve

V03 — AutoDilute Flow Control Valve

Y01 — Hydraulic Type Solenoid Valve

Y06, Y08, Y10, Y11, Y14, Y16, Y18, Y20, Y22, Y24 — Solenoid Valves

Y26 — AutoDilute Pump Valve

Y27 — Boom Height Lock Solenoid Valve

Section 280: Solution System

Group 15A: Solution System without Ring Line

Solution System (without Ring Line) Theory of Operation

Function Diagram — Sprayer with Single Pump

Group 15B: Solution System with Ring Line

Solution System (with Ring Line) Theory of Operation

Function Diagram — Sprayer with Single Pump and Ring Line Circulation System

Group 15C: AutoDilute System

AutoDilute Theory of Operation

John Deere Trailed Crop Sprayers 724, 724i, 732, 732i, 740, 740i Technical Manual (TM402919)