John Deere 310J Backhoe Loader Technical Manual (Operation & Test) (TM10846)

Complete Operation & Test Technical manual with Electrical Wiring Diagrams for John Deere 310J Backhoe Loader (SN:159760-), with workshop information to maintain, diagnose, and service like professional mechanics.

John Deere 310J Backhoe Loader workshop technical manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM10846 - John Deere 310J Backhoe Loader (S.N. 159760- ) Technical Manual (Operation & Test).pdf
TM10846 - John Deere 310J Backhoe Loader (S.N. 159760- ) Technical Manual (Operation & Test).epub

Total Pages: 1,046 pages
File Format: PDF/EPUB/MOBI/AZW (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English

TABLE OF CONTENTS
Foreword
Technical Information Feedback Form
Section 00: General Informations
  Group 0001: Safety Information
    Safety and Operator Convenience Features
    Recognize Safety Information
    Follow Safety Instructions
    Operate Only If Qualified
    Wear Protective Equipment
    Avoid Unauthorized Machine Modifications
    Inspect Machine
    Stay Clear of Moving Parts
    Avoid High-Pressure Oil
    Avoid High-Pressure Fluids
    Beware of Exhaust Fumes
    Prevent Fires
    Prevent Battery Explosions
    Handle Chemical Products Safely
    Dispose of Waste Properly
    Prepare for Emergencies
    Use Steps and Handholds Correctly
    Start Only From Operator's Seat
    Use and Maintain Seat Belt
    Prevent Unintended Machine Movement
    Prevent Unintended Machine Movement—If Equipped With Pilot Controls
    Avoid Work Site Hazards
    Keep Riders Off Machine
    Avoid Backover Accidents
    Avoid Machine Tipover
    Add and Operate Attachments Safely
    Use Special Care When Operating
    Operating or Traveling On Public Roads
    Inspect and Maintain ROPS
    Park and Prepare for Service Safely
    Service Cooling System Safely
    Remove Paint Before Welding or Heating
    Make Welding Repairs Safely
    Drive Metal Pins Safely
    Safety Signs
    Safety Signs—Backhoe Coupler (If Equipped)
  Group 0003: Torque Values
    Metric Bolt and Cap Screw Torque Values
    Additional Metric Cap Screw Torque Values
    Unified Inch Bolt and Cap Screw Torque Values
    Service Recommendations for 37° Flare and 30° Cone Seat Connectors
    Service Recommendations for O-Ring Boss Fittings
    O-Ring Boss Fittings In Aluminum Housing Service Recommendations—Excavators
    Service Recommendations for Flared Connections—Straight or Tapered Threads
    Service Recommendations For Flat Face O-Ring Seal Fittings
    O-Ring Face Seal Fittings With SAE Inch Hex Nut And Stud End For High Pressure Service Recommendations
    O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For Standard Pressure Service Recommendations
    O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For High Pressure Service Recommendations
    Service Recommendations for Metric Series Four Bolt Flange Fitting
    Service Recommendations For Inch Series Four Bolt Flange Fittings
    Inch Series Four Bolt Flange Fitting For High Pressure Service Recommendations
    Service Recommendations For Non-Restricted Banjo (Adjustable) Fittings
    Service Recommendations For O-Ring Boss Fittings With Shoulder
    Metric 24° O-Ring Seal DIN 20078 Service Recommendations
Safety and Operator Convenience Features
Safety and Operator Convenience Features
Recognize Safety Information
Follow Safety Instructions
Operate Only If Qualified
Wear Protective Equipment
Avoid Unauthorized Machine Modifications
Inspect Machine
Stay Clear of Moving Parts
Avoid High-Pressure Oil
Avoid High-Pressure Fluids
Beware of Exhaust Fumes
Prevent Fires
Prevent Battery Explosions
Handle Chemical Products Safely
Dispose of Waste Properly
Prepare for Emergencies
Use Steps and Handholds Correctly
Start Only From Operator's Seat
Use and Maintain Seat Belt
Prevent Unintended Machine Movement
Prevent Unintended Machine Movement—If Equipped With Pilot Controls
Avoid Work Site Hazards
Keep Riders Off Machine
Avoid Backover Accidents
Avoid Machine Tipover
Add and Operate Attachments Safely
Use Special Care When Operating
Operating or Traveling On Public Roads
Inspect and Maintain ROPS
Park and Prepare for Service Safely
Service Cooling System Safely
Remove Paint Before Welding or Heating
Make Welding Repairs Safely
Drive Metal Pins Safely
Safety Signs
Safety Signs—Backhoe Coupler (If Equipped)
Metric Bolt and Cap Screw Torque Values
Metric Bolt and Cap Screw Torque Values
Additional Metric Cap Screw Torque Values
Unified Inch Bolt and Cap Screw Torque Values
Service Recommendations for 37° Flare and 30° Cone Seat Connectors
Service Recommendations for O-Ring Boss Fittings
  Straight Fitting
  Angle Fitting
O-Ring Boss Fittings In Aluminum Housing Service Recommendations—Excavators
Service Recommendations for Flared Connections—Straight or Tapered Threads
Service Recommendations For Flat Face O-Ring Seal Fittings
O-Ring Face Seal Fittings With SAE Inch Hex Nut And Stud End For High Pressure Service Recommendations
O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For Standard Pressure Service Recommendations
O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For High Pressure Service Recommendations
Service Recommendations for Metric Series Four Bolt Flange Fitting
Service Recommendations For Inch Series Four Bolt Flange Fittings
Inch Series Four Bolt Flange Fitting For High Pressure Service Recommendations
Service Recommendations For Non-Restricted Banjo (Adjustable) Fittings
Service Recommendations For O-Ring Boss Fittings With Shoulder
Metric 24° O-Ring Seal DIN 20078 Service Recommendations
Section 01: Wheels
  Group 0110: Powered or Non-Powered Wheels and Fastenings
    Rear Wheel Assembly Remove and Install
    Front Wheel Assembly Remove and Install
    Tire Remove and Install
Rear Wheel Assembly Remove and Install
Rear Wheel Assembly Remove and Install
Front Wheel Assembly Remove and Install
Tire Remove and Install
Section 02: Axles and Suspension Systems
  Group 0225: Input Drive Shafts and U-Joints
    Universal Joint and Drive Shaft Remove and Install
  Group 0230: Non-Powered Wheel Axles
    Hub Assembly Remove and Install
    Spindle Assembly Remove and Install
    Tie Rod Remove and Install
    Non-Powered Front Axle Remove and Install
  Group 0240: Powered Wheel Axle (MFWD)
    Mechanical Front Wheel Drive (MFWD) Axle Remove and Install
    Mechanical Front Wheel Drive (MFWD) Axle Disassemble
    Mechanical Front Wheel Drive (MFWD) Axle Assemble
    Limited Slip Differential Disassemble and Assemble
  Group 0250: Axle Shaft, Bearings, and Reduction Gears
    Service Brakes Inspection
    Rear Axle Remove and Install
    Rear Axle Disassemble
    Park Brake Disassemble and Assemble
    Rear Axle Assemble
    Gear Tooth Contact Pattern Check
Universal Joint and Drive Shaft Remove and Install
  Rear Drive Shaft Remove and Install
  MFWD Drive Shaft Remove and Install—If Equipped
  U-Joint Remove and Install
Universal Joint and Drive Shaft Remove and Install
  Rear Drive Shaft Remove and Install
  MFWD Drive Shaft Remove and Install—If Equipped
  U-Joint Remove and Install
Hub Assembly Remove and Install
Hub Assembly Remove and Install
Spindle Assembly Remove and Install
Tie Rod Remove and Install
Non-Powered Front Axle Remove and Install
Mechanical Front Wheel Drive (MFWD) Axle Remove and Install
Mechanical Front Wheel Drive (MFWD) Axle Remove and Install
Mechanical Front Wheel Drive (MFWD) Axle Disassemble
  Planetary Drive Removal
  Ring Gear Removal
  Planetary Gears Removal
  Wheel Hub Removal and Disassembly
  Tie Rods Removal
  Steering Cylinder Removal
  Knuckle Housing Removal
  Drive Shaft Remove
  Knuckle Housing Disassembly
  Drive Shaft Disassembly
  Axle Housing Disassemble
Mechanical Front Wheel Drive (MFWD) Axle Assemble
  Axle Housing Assemble
  Knuckle Housing Assemble
  Drive Shaft Assemble
  Drive Shaft Install
  Knuckle Housing Install
  Wheel Hub Assemble
  Wheel Hub Install
  Ring Gear Install
  Planetary Gears Install
  Planetary Carrier Install
  Steering Cylinder Install
  Tie Rods Install
Limited Slip Differential Disassemble and Assemble
  Limited Slip Differential Disassemble
  Limited Slip Differential Assemble
Service Brakes Inspection
Service Brakes Inspection
Rear Axle Remove and Install
Rear Axle Disassemble
Park Brake Disassemble and Assemble
Rear Axle Assemble
Gear Tooth Contact Pattern Check
Section 03: Transmission
  Group 0300: Removal and Installation
    Transmission Remove
    Transmission Install
  Group 0315: Controls Linkage
    Transmission Control Lever (TCL) Remove and Install
  Group 0350: Gears, Shafts, and Power Shift Clutches
    Remove Outer Components to Disassemble Transmission
    Torque Converter Side of Transmission Case Disassemble 2WD (S.N. —149745), 4WD (S.N. —150728)
    Torque Converter Side of Transmission Case Disassemble 2WD (S.N. 149746—), 4WD (S.N. 150729—)
    Clutch Packs Remove
    High Range Forward, Low Range Forward, and Reverse Clutch Packs Disassemble and Assemble
    First Speed and Third Speed Clutch Disassemble and Assemble
    Second Speed Clutch Disassemble and Assemble
    Mechanical Front Wheel Drive (MFWD) Clutch Disassemble and Assemble
    Pump Drive Shaft Install
    Clutch Packs Install
    Torque Converter Side of Transmission Case Assemble 2WD (S.N. —149745), 4WD (S.N. —150728)
    Torque Converter Side of Transmission Case Assemble 2WD (S.N. 149746—), 4WD (S.N. 150729—)
    Install Outer Components to Assemble Transmission
  Group 0360: Hydraulic System
    Transmission Charge Pump Remove and Install
    Transmission Charge Pump Disassemble and Assemble
Transmission Remove
Transmission Remove
Transmission Install
Transmission Control Lever (TCL) Remove and Install
Transmission Control Lever (TCL) Remove and Install
Remove Outer Components to Disassemble Transmission
Remove Outer Components to Disassemble Transmission
Torque Converter Side of Transmission Case Disassemble 2WD (S.N. —149745), 4WD (S.N. —150728)
Torque Converter Side of Transmission Case Disassemble 2WD (S.N. 149746—), 4WD (S.N. 150729—)
Clutch Packs Remove
High Range Forward, Low Range Forward, and Reverse Clutch Packs Disassemble and Assemble
First Speed and Third Speed Clutch Disassemble and Assemble
Second Speed Clutch Disassemble and Assemble
Mechanical Front Wheel Drive (MFWD) Clutch Disassemble and Assemble
Pump Drive Shaft Install
Clutch Packs Install
Torque Converter Side of Transmission Case Assemble 2WD (S.N. —149745), 4WD (S.N. —150728)
Torque Converter Side of Transmission Case Assemble 2WD (S.N. 149746—), 4WD (S.N. 150729—)
Install Outer Components to Assemble Transmission
Transmission Charge Pump Remove and Install
Transmission Charge Pump Remove and Install
Transmission Charge Pump Disassemble and Assemble
Section 04: Engine
  Group 0400: Removal and Installation
    POWERTECH 4.5L (4045) and 6.8L (6068) John Deere Engines
    Engine Remove Export Package
    Engine Install Export Package
POWERTECH 4.5L (4045) and 6.8L (6068) John Deere Engines
POWERTECH 4.5L (4045) and 6.8L (6068) John Deere Engines
Engine Remove Export Package
Engine Install Export Package
Section 05: Engine Auxiliary Systems
  Group 0505: Cold Weather Starting Aid
    Coolant Heater Remove and Install
    Starting Aid Nozzle Remove and Install
    Starting Aid Solenoid Remove and Install
  Group 0510: Cooling System
    Fan Remove and Install
    Fan Belt Remove and Install
    Radiator Remove and Install
  Group 0515: Speed Controls
    Engine Speed Control Pedal Remove and Install
  Group 0520: Intake System
    Air Cleaner Remove and Install
  Group 0530: Exhaust System
    Muffler With Turbocharger Remove and Install
  Group 0560: External Fuel Supply System
    Fuel Tank Remove and Install
Coolant Heater Remove and Install
Coolant Heater Remove and Install
Starting Aid Nozzle Remove and Install
Starting Aid Solenoid Remove and Install
Fan Remove and Install
Fan Remove and Install
Fan Belt Remove and Install
Radiator Remove and Install
Engine Speed Control Pedal Remove and Install
Engine Speed Control Pedal Remove and Install
Air Cleaner Remove and Install
Air Cleaner Remove and Install
Muffler With Turbocharger Remove and Install
Muffler With Turbocharger Remove and Install
Fuel Tank Remove and Install
Fuel Tank Remove and Install
Section 06: Torque Converter
  Group 0651: Turbine, Gears and Shaft
    Torque Converter Remove and Install
    Torque Converter Disassemble and Assemble
Torque Converter Remove and Install
Torque Converter Remove and Install
Torque Converter Disassemble and Assemble
Section 09: Steering System
  Group 0960: Hydraulic System
    Steering Column Remove and Install
    Standard Steering Wheel and Column Disassemble and Assemble
    Tilt Steering Wheel and Column Disassemble and Assemble
    Steering Valve Remove and Install
    Steering Valve Disassemble and Assemble
    Non-Powered Front Axle Steering Cylinder Repair
    Mechanical Front Wheel Drive (MFWD) Axle Steering Cylinder Disassemble and Assemble
Steering Column Remove and Install
Steering Column Remove and Install
Standard Steering Wheel and Column Disassemble and Assemble
Tilt Steering Wheel and Column Disassemble and Assemble
Steering Valve Remove and Install
Steering Valve Disassemble and Assemble
Non-Powered Front Axle Steering Cylinder Repair
  Non-Powered Front Axle Steering Cylinder Remove and Install
  Non-Powered Front Axle Steering Cylinder Disassemble and Assemble
Mechanical Front Wheel Drive (MFWD) Axle Steering Cylinder Disassemble and Assemble
Section 10: Service Brakes
  Group 1011: Active Elements
    Service Brake External Inspection
    Brake Disk and Pressure Plate Remove and Install
  Group 1060: Hydraulic System
    Brake Valve Remove and Install
    Brake Valve Disassemble and Assemble
    Brake Valve Lines Disassemble and Assemble
    Brake Pedals Remove and Install
    Brake Pedal Adjustment
    Brake Bleeding Procedure
Service Brake External Inspection
Service Brake External Inspection
Brake Disk and Pressure Plate Remove and Install
Brake Valve Remove and Install
Brake Valve Remove and Install
Brake Valve Disassemble and Assemble
Brake Valve Lines Disassemble and Assemble
Brake Pedals Remove and Install
Brake Pedal Adjustment
Brake Bleeding Procedure
Section 11: Park Brake
  Group 1111: Active Elements
    Park Brake Remove and Install
Park Brake Remove and Install
Park Brake Remove and Install
Section 17: Frame or Supporting Structure
  Group 1740: Frame Installation
    Welding Repair of Major Structures
    RIVNUT RIVNUT is a registered trademark of The BF Goodrich Co. (KREMNUT) Fasteners Remove and Install
    Main Frame Bushings Remove and Install
  Group 1749: Chassis Weights
    Counterweight Remove and Install
Welding Repair of Major Structures
Welding Repair of Major Structures
RIVNUT® (KREMNUT) Fasteners Remove and Install
Main Frame Bushings Remove and Install
Counterweight Remove and Install
Counterweight Remove and Install
Section 18: Operator’s Station
  Group 1800: Removal and Installation
    Cab/ROPS Remove and Install
  Group 1810: Operator Enclosure
    Front Window Wiper and Wiper Motor Remove and Install
    Rear Window Wiper and Wiper Motor Remove and Install
    Front Cab Windowpane Remove and Install
    Fixed Windowpanes Remove and Install
    Cab Door and Side Window Disassemble and Assemble
    Cab Door Hinges and Latch Adjustment
    Upper Cab Door and Side Windowpanes Adjustment
    Upper Cab Door and Side Window Latch Adjustment
    Rear Window and Frame Assembly Remove and Install
    Rear Windows Remove and Install
    Headliner Remove and Install
    Cab Roof Remove and Install
  Group 1821: Seat and Seat Belt
    Seat Assembly Remove and Install
    Seat and Arm Rest Disassemble and Assemble
    Seat Belt Disassemble and Assemble
    Seat Slide, Lumbar Support, and Adjuster Control Levers Disassemble and Assemble
    Seat Swivel and Swivel Latch Disassemble and Assemble
    Seat Suspension and Shock Absorber Disassemble and Assemble
    Air Suspension Seat Disassemble and Assemble—If Equipped
  Group 1830: Heating and Air Conditioning
    Proper Refrigerant Handling
    R134a Refrigerant—Cautions
    R134a Refrigerant Theory Of Operation
    Refrigerant Hoses and Tubing Inspection
    Air Conditioning Compressor Remove and Install
    R134a Compressor Oil Check
    R134a Compressor Oil Removal Procedure
    R134a Component Oil Charge Procedure
    Compressor Clutch Disassemble and Assemble
    Clutch Hub Clearance Check
    Compressor Manifold Inspect
    Air Conditioning Compressor Disassemble and Assemble
    R134a Refrigerant Recover, Recycle, and Charge Station Installation Procedure
    R134a System Recover Procedure
    R134a System Evacuate Procedure
    R134a System Charge Procedure
    R134a System Cleaning Procedure
    R134a System Leak Testing
    Heater Core Remove and Install
    Evaporator Remove and Install
    R134a System Flush Procedure
    R134a System Purge Procedure
    Air Conditioning Freeze Switch Remove and Install
    Heater/Blower Assembly with Air Conditioning and Pressurizer System Disassemble and Assemble
    Air Ducts Disassemble and Assemble
    Condenser Disassemble and Assemble
    Receiver Dryer Remove and Install
    Expansion Valve—Remove and Install
Cab/ROPS Remove and Install
Cab/ROPS Remove and Install
Front Window Wiper and Wiper Motor Remove and Install
Front Window Wiper and Wiper Motor Remove and Install
Rear Window Wiper and Wiper Motor Remove and Install
Front Cab Windowpane Remove and Install
Fixed Windowpanes Remove and Install
Cab Door and Side Window Disassemble and Assemble
Cab Door Hinges and Latch Adjustment
Upper Cab Door and Side Windowpanes Adjustment
Upper Cab Door and Side Window Latch Adjustment
Rear Window and Frame Assembly Remove and Install
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Rear Windows Remove and Install
Headliner Remove and Install
Cab Roof Remove and Install
Seat Assembly Remove and Install
Seat Assembly Remove and Install
Seat and Arm Rest Disassemble and Assemble
Seat Belt Disassemble and Assemble
Seat Slide, Lumbar Support, and Adjuster Control Levers Disassemble and Assemble
Seat Swivel and Swivel Latch Disassemble and Assemble
Seat Suspension and Shock Absorber Disassemble and Assemble
Air Suspension Seat Disassemble and Assemble—If Equipped
Proper Refrigerant Handling
Proper Refrigerant Handling
R134a Refrigerant—Cautions
R134a Refrigerant Theory Of Operation
Refrigerant Hoses and Tubing Inspection
Air Conditioning Compressor Remove and Install
R134a Compressor Oil Check
R134a Compressor Oil Removal Procedure
R134a Component Oil Charge Procedure
Compressor Clutch Disassemble and Assemble
Clutch Hub Clearance Check
Compressor Manifold Inspect
Air Conditioning Compressor Disassemble and Assemble
R134a Refrigerant Recover, Recycle, and Charge Station Installation Procedure
R134a System Recover Procedure
R134a System Evacuate Procedure
R134a System Charge Procedure
R134a System Cleaning Procedure
R134a System Leak Testing
Heater Core Remove and Install
Evaporator Remove and Install
R134a System Flush Procedure
R134a System Purge Procedure
Air Conditioning Freeze Switch Remove and Install
Heater/Blower Assembly with Air Conditioning and Pressurizer System Disassemble and Assemble
Air Ducts Disassemble and Assemble
Condenser Disassemble and Assemble
Receiver Dryer Remove and Install
Expansion Valve—Remove and Install
Section 19: Sheet Metal and Styling
  Group 1910: Hood and Engine Enclosure
    Hood and Engine Enclosure Disassemble and Assemble
  Group 1913: Miscellaneous Shields
    Battery Box Disassemble and Assemble
  Group 1921: Grille and Grille Housing
    Grille and Grille Housing Disassemble and Assemble
  Group 1927: Fenders
    Fenders and Cab Skirts Remove and Install—If Equipped
Hood and Engine Enclosure Disassemble and Assemble
Hood and Engine Enclosure Disassemble and Assemble
Battery Box Disassemble and Assemble
Battery Box Disassemble and Assemble
Grille and Grille Housing Disassemble and Assemble
Grille and Grille Housing Disassemble and Assemble
Fenders and Cab Skirts Remove and Install—If Equipped
Fenders and Cab Skirts Remove and Install—If Equipped
Section 20: Safety, Convenience and Miscellaneous
  Group 2001: Radio
    Radio and Speakers Remove and Install
    Antenna Remove and Install
    Radio Speakers and Antenna Remove and Install
  Group 2004: Horn and Warning Devices
    Horn Remove and Install
    Backup Alarm Remove and Install
    Backup Alarm Volume Adjustment
Radio and Speakers Remove and Install
Radio and Speakers Remove and Install
Antenna Remove and Install
Radio Speakers and Antenna Remove and Install
Horn Remove and Install
Horn Remove and Install
Backup Alarm Remove and Install
Backup Alarm Volume Adjustment
Section 21: Main Hydraulic System
  Group 2160: Hydraulic System
    Hydraulic Pump Remove and Install
    Hydraulic Pump Disassemble and Assemble
    Hydraulic Filter Assembly Remove and Install
    Hydraulic Reservoir Remove and Install
    Hydraulic Reservoir Disassemble and Assemble
    Hydraulic and Transmission Oil Coolers Remove and Install
Hydraulic Pump Remove and Install
Hydraulic Pump Remove and Install
Hydraulic Pump Disassemble and Assemble
  Hydraulic Pump Disassemble
  Hydraulic Pump Assemble
Hydraulic Filter Assembly Remove and Install
Hydraulic Reservoir Remove and Install
Hydraulic Reservoir Disassemble and Assemble
Hydraulic and Transmission Oil Coolers Remove and Install
  Lower Hydraulic Oil Cooler Remove
  Lower Hydraulic Oil Cooler Install
  Upper Hydraulic Cooler Remove
  Upper Hydraulic Cooler Install
  Transmission Oil Cooler Remove and Install
Section 31: Loader
  Group 3100: Loader
    Loader Boom Remove and Install
  Group 3102: Bucket
    Loader Bucket Remove and Install
    Welded Bucket Cutting Edges Replacement Procedure
    Loader Bucket Cutting Edge Crack Repair
    Loader Bucket Cutting Edge Remove and Install
    Multi-Purpose Bucket and Lines Disassemble and Assemble
  Group 3104: Attachment Coupler
    Attachment Coupler Remove and Install
    Attachment Coupler Cylinder Remove and Install
    Attachment Coupler Cylinder Disassemble and Assemble
  Group 3115: Control Linkages
    Loader Bucket Self-Leveling Linkage and Return-to-Dig Switch Adjustment
    Loader Control Valve Linkage Remove and Install
    Third Function Loader Control Valve Linkage Remove and Install
    Stabilizer Linkage Remove and Install
    Loader Bucket Cylinder Linkage Remove and Install
  Group 3160: Hydraulic System
    Loader and Stabilizer Control Valve Remove and Install
    Loader and Stabilizer Control Valve Disassemble and Assemble
    Loader and Stabilizer Control Valve Relief Valves Remove and Install
    Loader Boom Anticavitation Valve Disassemble and Assemble
    Loader Boom Raise and Bucket Curl Circuit Relief Valve Disassemble and Assemble
    Loader Bucket Dump Circuit Relief Valve with Anticavitation Disassemble and Assemble
    Loader Auxiliary Circuit Relief Valve Disassemble and Assemble
    Loader Auxiliary Shutoff Plug Disassemble and Assemble
    Loader Boom Cylinder Remove and Install
    Loader Boom Cylinder Disassemble and Assemble
    Loader Bucket Cylinder Remove and Install
    Loader Bucket Cylinder Disassemble and Assemble
    Loader Multi-Purpose Bucket Cylinder Disassemble and Assemble
    Ride Control Valve Remove and Install
    Ride Control Valve Disassemble and Assemble
    Ride Control Valve Solenoid Disassemble and Assemble
    Ride Control Accumulator Remove and Install
Loader Boom Remove and Install
  Loader Boom Remove
  Loader Boom Install
Loader Boom Remove and Install
  Loader Boom Remove
  Loader Boom Install
Loader Bucket Remove and Install
Loader Bucket Remove and Install
Welded Bucket Cutting Edges Replacement Procedure
Loader Bucket Cutting Edge Crack Repair
Loader Bucket Cutting Edge Remove and Install
Multi-Purpose Bucket and Lines Disassemble and Assemble
Attachment Coupler Remove and Install
Attachment Coupler Remove and Install
Attachment Coupler Cylinder Remove and Install
Attachment Coupler Cylinder Disassemble and Assemble
Loader Bucket Self-Leveling Linkage and Return-to-Dig Switch Adjustment
Loader Bucket Self-Leveling Linkage and Return-to-Dig Switch Adjustment
Loader Control Valve Linkage Remove and Install
Third Function Loader Control Valve Linkage Remove and Install
Stabilizer Linkage Remove and Install
Loader Bucket Cylinder Linkage Remove and Install
Loader and Stabilizer Control Valve Remove and Install
Loader and Stabilizer Control Valve Remove and Install
Loader and Stabilizer Control Valve Disassemble and Assemble
Loader and Stabilizer Control Valve Relief Valves Remove and Install
Loader Boom Anticavitation Valve Disassemble and Assemble
Loader Boom Raise and Bucket Curl Circuit Relief Valve Disassemble and Assemble
Loader Bucket Dump Circuit Relief Valve with Anticavitation Disassemble and Assemble
Loader Auxiliary Circuit Relief Valve Disassemble and Assemble
Loader Auxiliary Shutoff Plug Disassemble and Assemble
Loader Boom Cylinder Remove and Install
Loader Boom Cylinder Disassemble and Assemble
Loader Bucket Cylinder Remove and Install
Loader Bucket Cylinder Disassemble and Assemble
Loader Multi-Purpose Bucket Cylinder Disassemble and Assemble
Ride Control Valve Remove and Install
Ride Control Valve Disassemble and Assemble
Ride Control Valve Solenoid Disassemble and Assemble
Ride Control Accumulator Remove and Install
Section 33: Backhoe
  Group 3302: Bucket
    Backhoe Bucket and Bucket Links Remove and Install
    Backhoe Bucket Tooth Tips Remove and Install
    Bucket Tooth Shank Remove and Install
    Backhoe Bucket Cutting Edge Remove and Install
  Group 3315: Control Linkage
    Backhoe Control Valve Linkage—Two Lever Remove and Install
    Backhoe Control Valve Linkage—Three Lever Remove and Install
    Backhoe Fifth Function Pedal Remove and Install
    Backhoe Sixth Function Pedal Remove and Install
    Backhoe Pilot Control Valve Remove and Install
    Backhoe Pilot Control Valve Disassemble and Assemble
    Backhoe Pilot Control Tower Remove and Install
    Backhoe Pilot Control Tower Disassemble and Assemble
    Backhoe Boom Lock Control Lever and Linkage Remove and Install
    Backhoe Boom Lock Remove and Install
  Group 3340: Frames
    Dipperstick Remove and Install
    Boom Remove and Install
    Swing Frame Remove and Install
    Extendible Dipperstick Extension Remove and Install
    Sideshift Frame Remove and Install—315SJ
  Group 3360: Hydraulic System
    Backhoe Control Valve Remove and Install
    Backhoe Control Valve Disassemble and Assemble
    Backhoe Control Valve Spool Seals Remove and Install
    Backhoe Control Valve Relief Valves Remove and Install
    Backhoe Priority Inlet Section Disassemble and Assemble
    Backhoe Boom Section Disassemble and Assemble
    Backhoe Bucket Section Disassemble and Assemble
    Backhoe Crowd Section Disassemble and Assemble
    Backhoe Swing Section Disassemble and Assemble
    Backhoe Extendable Dipperstick Section Disassemble and Assemble
    Backhoe Selective Flow Section Disassemble and Assemble
    Pilot Control Manifold Valve Remove and Install (S.N. —178748)
    Pilot Control Manifold Valve Disassemble and Assemble (S.N. —178748)
    Pattern Select Valve Remove and Install (S.N. —178748)
    Pattern Select Valve Disassemble and Assemble (S.N. —178748)
    Backhoe Boom Cylinder Remove and Install
    Backhoe Boom Cylinder Disassemble and Assemble
    Backhoe Bucket Cylinder Remove and Install
    Backhoe Bucket Cylinder Disassemble and Assemble
    Backhoe Crowd Cylinder Remove and Install
    Backhoe Crowd Cylinder Disassemble and Assemble
    Backhoe Stabilizer Cylinder Remove and Install
    Backhoe Stabilizer Cylinder Remove and Install—315SJ
    Backhoe Stabilizer Cylinder Disassemble and Assemble
    Backhoe Swing Cylinder Remove and Install
    Backhoe Swing Cylinder Disassemble and Assemble
    Backhoe Extendible Dipperstick Cylinder Remove and Install
    Backhoe Extendible Dipperstick Cylinder Disassemble and Assemble
    Backhoe Boom Lock Cylinder Remove and Install—315SJ
    Backhoe Sideshift Lock Valve Remove and Install—315SJ
    Backhoe Sideshift Lock Valve Disassemble and Assemble—315SJ
    Backhoe Sideshift Lock Piston and Bushing Remove and Install—315SJ
Backhoe Bucket and Bucket Links Remove and Install
Backhoe Bucket and Bucket Links Remove and Install
Backhoe Bucket Tooth Tips Remove and Install
Bucket Tooth Shank Remove and Install
Backhoe Bucket Cutting Edge Remove and Install
Backhoe Control Valve Linkage—Two Lever Remove and Install
Backhoe Control Valve Linkage—Two Lever Remove and Install
Backhoe Control Valve Linkage—Three Lever Remove and Install
Backhoe Fifth Function Pedal Remove and Install
  Backhoe Fifth Function Pedal (Two Lever) Remove and Install
  Backhoe Fifth Function Pedal (Pilot Control) Remove and Install
Backhoe Sixth Function Pedal Remove and Install
  Backhoe Sixth Function Pedal Remove and Install (Two Lever)
  Backhoe Sixth Function Pedal (Pilot Control) Remove and Install
Backhoe Pilot Control Valve Remove and Install
Backhoe Pilot Control Valve Disassemble and Assemble
  Backhoe Pilot Control Valve Disassemble and Assemble (S.N. —172422)
  Backhoe Pilot Control Valve Disassemble and Assemble (S.N. 172423— )
Backhoe Pilot Control Tower Remove and Install
Backhoe Pilot Control Tower Disassemble and Assemble
Backhoe Boom Lock Control Lever and Linkage Remove and Install
Backhoe Boom Lock Remove and Install
Dipperstick Remove and Install
Dipperstick Remove and Install
Boom Remove and Install
Swing Frame Remove and Install
Extendible Dipperstick Extension Remove and Install
  Extendible Dipperstick Extension Remove
  Extendible Dipperstick Extension Install
Sideshift Frame Remove and Install—315SJ
Backhoe Control Valve Remove and Install
Backhoe Control Valve Remove and Install
Backhoe Control Valve Disassemble and Assemble
Backhoe Control Valve Spool Seals Remove and Install
Backhoe Control Valve Relief Valves Remove and Install
Backhoe Priority Inlet Section Disassemble and Assemble
Backhoe Boom Section Disassemble and Assemble
Backhoe Bucket Section Disassemble and Assemble
Backhoe Crowd Section Disassemble and Assemble
Backhoe Swing Section Disassemble and Assemble
Backhoe Extendable Dipperstick Section Disassemble and Assemble
Backhoe Selective Flow Section Disassemble and Assemble
Pilot Control Manifold Valve Remove and Install (S.N. —178748)
Pilot Control Manifold Valve Disassemble and Assemble (S.N. —178748)
Pattern Select Valve Remove and Install (S.N. —178748)
Pattern Select Valve Disassemble and Assemble (S.N. —178748)
Backhoe Boom Cylinder Remove and Install
Backhoe Boom Cylinder Disassemble and Assemble
Backhoe Bucket Cylinder Remove and Install
Backhoe Bucket Cylinder Disassemble and Assemble
Backhoe Crowd Cylinder Remove and Install
Backhoe Crowd Cylinder Disassemble and Assemble
Backhoe Stabilizer Cylinder Remove and Install
Backhoe Stabilizer Cylinder Remove and Install—315SJ
Backhoe Stabilizer Cylinder Disassemble and Assemble
Backhoe Swing Cylinder Remove and Install
Backhoe Swing Cylinder Disassemble and Assemble
Backhoe Extendible Dipperstick Cylinder Remove and Install
Backhoe Extendible Dipperstick Cylinder Disassemble and Assemble
Backhoe Boom Lock Cylinder Remove and Install—315SJ
Backhoe Sideshift Lock Valve Remove and Install—315SJ
Backhoe Sideshift Lock Valve Disassemble and Assemble—315SJ
Backhoe Sideshift Lock Piston and Bushing Remove and Install—315SJ
Section 99: Dealer Fabricated Tool
  Group 9900: Dealer Fabricated Tool
    DFRW20 Compressor Holding Fixture
    DFT1101 Cab and ROPS Lift Bracket
    DFT1285 Engine Support Bracket
    DFT1286 Backlash Measurement Tool
DFRW20 Compressor Holding Fixture
DFRW20 Compressor Holding Fixture
DFT1101 Cab and ROPS Lift Bracket
DFT1285 Engine Support Bracket
  DFT1285A Engine Support Bracket
DFT1286 Backlash Measurement Tool
tm10146 - 310SJ (S.N. - 159759), 315SJ (S.N. - BE315SJ300868)Backhoe Loaders Technical Manual  MAIN SECTIONNS
  Foreword
  Technical Information Feedback Form
  General Informations
    Safety Information
    Torque Values
  Wheels
    Powered or Non-Powered Wheels and Fastenings
  Axles and Suspension Systems
    Input Drive Shafts and U-Joints
    Non-Powered Wheel Axles
    Powered Wheel Axle (MFWD)
    Axle Shaft, Bearings, and Reduction Gears
  Transmission
    Removal and Installation
    Controls Linkage
    Gears, Shafts, and Power Shift Clutches
    Hydraulic System
  Engine
    Removal and Installation
  Engine Auxiliary Systems
    Cold Weather Starting Aid
    Cooling System
    Speed Controls
    Intake System
    Exhaust System
    External Fuel Supply System
  Torque Converter
    Turbine, Gears and Shaft
  Steering System
    Hydraulic System
  Service Brakes
    Active Elements
    Hydraulic System
  Park Brake
    Active Elements
  Frame or Supporting Structure
    Frame Installation
    Chassis Weights
  Operator’s Station
    Removal and Installation
    Operator Enclosure
    Seat and Seat Belt
    Heating and Air Conditioning
  Sheet Metal and Styling
    Hood and Engine Enclosure
    Miscellaneous Shields
    Grille and Grille Housing
    Fenders
  Safety, Convenience and Miscellaneous
    Radio
    Horn and Warning Devices
  Main Hydraulic System
    Hydraulic System
  Loader
    Loader
    Bucket
    Attachment Coupler
    Control Linkages
    Hydraulic System
  Backhoe
    Bucket
    Control Linkage
    Frames
    Hydraulic System
  Dealer Fabricated Tool
    Dealer Fabricated Tool

John Deere 310J Backhoe Loader Technical Manual (Operation & Test) (TM10846)