Complete Repair manual for John Deere 300D, 310D, 315D Backhoe Loaders, with workshop information to maintain, repair, service like professional mechanics.

John Deere 300D, 310D, 315D Backhoe Loaders workshop service repair manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM1497 - 300D, 310D, 315D Backhoe Loaders Technical Manual (Repair).pdf
TM1497 - 300D, 310D, 315D Backhoe Loaders Technical Manual (Repair).epub

Total Pages: 1,331 pages
File Format: PDF/EPUB/MOBI/AZW (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English

tm1497 - 300D, 310D, and 315D Backhoe Loader

Table of Contents

Foreword

Section 00: General Information

Group 0001: Safety Information

Handle Fluids Safely—Avoid Fires

Prevent Battery Explosions

Prepare for Emergencies

Prevent Acid Burns

Handle Chemical Products Safely

Avoid High-Pressure Fluids

Park Machine Safely

Support Machine Properly

Wear Protective Clothing

Work in Clean Area

Service Machines Safely

Work In Ventilated Area

Illuminate Work Area Safely

Replace Safety Signs

Use Proper Lifting Equipment

Remove Paint Before Welding or Heating

Avoid Heating Near Pressurized Fluid Lines

Keep ROPS Installed Properly

Service Tires Safely

Avoid Harmful Asbestos Dust

Practice Safe Maintenance

Use Proper Tools

Dispose of Waste Properly

Live With Safety

Group 0002: General Specifications

300D Specifications

300D Backhoe Loader

300D Backhoe Loader (Continued)

300D Backhoe Loader Buckets

300D Backhoe Loader Drain And Refill Capacities

300D Backhoe Loader Lifting Capacities—KG (LB)

310D Specifications

310D Backhoe Loader

310D Backhoe Loader (Continued)

310D Buckets

310D Drain And Refill Capacities

310D Backhoe Loader Lifting Capacities—KG (LB)

315D Specifications

315D Sideshift Backhoe Loader

315D Sideshift Backhoe Loader (Continued)

315D Buckets

315D Sideshift Backhoe Loader Drain And Refill Capacities

315D Lift Capacity—LB (KG)

Group 0003: Torque Values

Hardware Torque Specifications

Checking Wheel Fasteners

Unified Inch Bolt and Cap Screw Torque Values

Metric Bolt And Cap Screw Torque Values

Additional Metric Cap Screw Torque Values

Check Oil Lines And Fittings

Service Recommendations for 37° Flare and 30° Cone Seat Connectors

Service Recommendations for O-Ring Boss Fittings

Service Recommendations for Flat Face O-Ring Seal Fittings

Service Recommendations For Inch Series Four Bolt Flange Fittings

Service Recommendations for Metric Series Four Bolt Flange Fitting

Group 0004: Fuels And Lubricants

Diesel Fuel

Storing Fuel

Do Not Use Galvanized Containers

Fuel Tank

Engine Break-In Oil

Diesel Engine Oil

Mechanical Front Wheel Drive Oil

Hydraulic And Reverser Oil

Mechanical Front Wheel Drive Oil

Grease

Grease For Extendible Dipperstick

Alternative and Synthetic Lubricants

Lubricant Storage

Mixing of Lubricants

Diesel Engine Coolant

Section 01: Wheels

Group 0110: Powered Wheels And Fastenings

Service Equipment And Tools

Specifications

Remove Rear Wheel Assembly

Remove Front Wheel Assembly

Remove Tire

Install Tire

Install Rear Wheel Assembly

Install Front Wheel Assembly

Group 0120: Non-Powered Wheels And Fastenings

Service Equipment And Tools

Specifications

Remove Front Wheel Assembly

Remove Tire

Install Tire

Install Front Wheel Assembly

Section 02: Axles And Suspension Systems

Group 0225: Input Drive Shafts And U-Joints

Specifications

Remove And Disassemble Drive Shaft

Assemble And Install Drive Shaft

Group 0230: Non-Powered Wheel Axles

Service Equipment And Tools

Other Material

Specifications

Axle, Hub And Knuckle Assembly

Remove Hub Assembly

Remove Spindle And Knuckle Assembly

Install Spindle And Knuckle Assembly

Install Hub Assembly

Remove Tie Rod

Install Tie Rod

Remove Non-Powered Front Axle

Remove And Install Axle Pivot Bushings

Install Non-Powered Front Axle

Adjust Non-Powered Front Axle Toe-In

Group 0240: Powered Wheel Axle (MFWD)

Special Or Essential Tools

Service Equipment And Tools

Other Material

Specifications

Remove Powered Front Axle

Install Powered Wheel Axle

Disassemble Knuckle Housing And Wheel Hub With Planetary Drive—APL-735 (SN —796033)

Disassemble Axle Shaft And Constant Velocity Joint—APL-735 (SN —796033)

Knuckle Housing And Wheel Hub With Planetary Drive Exploded View

Assemble Axle Shaft And Constant Velocity Joint—APL-735 (SN —796033)

Assemble And Adjust Knuckle Housing And Wheel Hub With Planetary

Remove And Install Differential

Differential Exploded View

Disassemble Differential

Assemble Differential

Disassemble Knuckle Housing And Wheel Hub With Planetary Drive—APL-2025 (SN 796034— )

Disassemble Axle Shaft And Constant Velocity Joint—APL-2025 Axle (SN 796034— )

Knuckle Housing And Planetary Hub Exploded View—APL-2025 (SN 796034— )

Assemble Axle Shaft And Constant Velocity Joint—APL-2025 (SN 796034— )

Assemble And Adjust Knuckle Housing And Wheel Hub With Planetary—APL-2025 (SN 796034— )

Remove Differential—APL-2025 Axle (SN 796034— )

Disassemble Differential—APL-2025 Axle (SN 796034— )

Exploded View Of Differential Housing—APL-2025 Axle (SN 796034— )

Exploded View Of Pinion Shaft—APL-2025 Axle (SN 796034— )

Adjust Cone Point—APL-2025 Axle (SN 796034— )

Assemble Bevel Pinion Shaft—APL-2025 Axle (SN 796034— )

Assemble Differential Housing —APL-2025 Axle (SN 796034— )

Adjust MFWD Axle Toe-In

Group 0250: Axle Shaft, Bearings, And Reduction Gears

Special Or Essential Tools

Service Equipment And Tools

Other Material

Specifications

Remove And Install Rear Axle

Remove Brake Disk And Final Drive Pinion Shaft To Disassemble Axle

Remove Planetary Pinion Assembly

Disassemble And Assemble Planetary Pinion Carrier

Remove Axle Shaft To Disassemble Axle Housing

Disassemble Axle Housing

Remove And Inspect Brake Pressure Plate

Disassemble And Inspect Rear Axle Shaft

Assemble Rear Axle Shaft

Install Brake Pressure Plate And Brake Disk (SN —796851)

Install Brake Pressure Plate And Brake Disk (SN 796852— )

Assemble Axle Housing

Install And Grease Axle Shaft

Adjust Axle Bearings

Install Final Drive Pinion Shaft And Brake Disk

Install Stop Screws And Pressure Test Brake Piston (SN —796851)

Pressure Test Brake Piston (SN 796852— )

Group 0299: Dealer Fabricated Tools

DF1002 Rolling Drag Torque Bar

Section 03: Transmission

Group 0300: Removal And Installation

Special Or Essential Tools

Service Equipment And Tools

Other Material

Specifications

Remove Reverser With Torque Converter

Remove And Install Torque Converter From Reverser

Install Reverser With Torque Converter

Remove Transaxle

Install Transaxle

Remove And Install MFWD Transfer Case

Group 0315: Controls Linkage

Other Material

Specifications

Remove And Install Shifter Linkage (SN —796528)

Remove And Install Shifter Linkage (SN 796529—802199)

Remove And Install Shifter Linkage (SN 802200— )

Group 0325: Input Drive Shafts And U-Joints

Specifications

Remove And Install Drive Shaft

Group 0350: Gears, Shafts, Bearings, And Power Shift Clutch

Special Or Essential Tools

Service Equipment And Tools

Other Material

Specifications

Reverser Repair Information

Remove And Disassemble Front Cover And Reverse Brake

Remove And Disassemble Input Shaft And Forward Clutch

Remove Planetary Assembly And Bearing Retainer

Assemble Input Shaft And Forward Clutch

Assemble Bearing Retainer

Install Bearing Retainer

Install Planetary Assembly

Install Input Shaft And Forward Clutch

Assemble And Install Reverse Brake And Front Cover

Transaxle—300D

Transaxle—310D, 315D (SN —796033)

Transaxle—310D, 315D (SN 796034— )

MFWD Transfer Case

Remove Brake Lines, Shift Bracket And Link

Remove Park Brake Actuator

Remove Axles

Remove Transaxle Cover

Remove Park Brake Shaft

Remove Transmission Lube Pump

Remove Third And Fourth Speed Shifter Shaft And Fork

Remove Transmission Drive Shaft

Remove Differential Lock

Remove Differential

Remove First And Second Speed Shifter Shaft And Fork

Remove Differential Drive Shaft—300D

Remove Differential Drive Shaft—310D, 315D

Remove And Install Oil Lines

Disassemble Lube Pump

Assemble Lube Pump

Disassemble Transmission Drive Shaft

Assemble Transmission Drive Shaft

Disassemble Differential

Assemble Differential

Adjust Differential Drive Shaft Cone Point

Adjust Differential Housing Preload

Install Differential Drive Shaft—300D

Install Differential Drive Shaft—310D, 315D

Adjust Differential Drive Shaft Rolling Drag Torque

Second Speed Gear End Play—310D, 315D

Install First And Second Speed Shifter Shaft And Fork

Install Differential

Adjust Differential Housing Backlash

Install Differential Lock Assembly

Install Transmission Drive Shaft

Install Transmission Lube Pump (SN —797883)

Install Transmission Lube Pump (SN 797884— )

Install Third And Fourth Speed Shifter Shaft

Install Transmission Drive Shaft Quill

Adjust Transmission Drive Shaft End Play

Install Park Brake Shaft

Install Transmission Cover

Install Axles

Install Park Brake Actuator

Install Brake Lines, Shift Bracket And Link

Disassemble And Assemble MFWD Transfer Case

Group 0360: Hydraulic System

Specifications

Other Material

Remove And Install Solenoid Valves (SN —792482)

Remove And Install Solenoid Valves (SN 792483— )

Remove And Install Directional Control/Regulator Valve (SN —792482)

Disassemble Directional Control/Regulator Valve (SN —792482)

Assemble Directional Control/Regulator Valve (SN —792482)

Remove And Install Regulator Valve (SN 792483— )

Disassemble And Assemble Directional Control Valve (SN 792483— )

Remove And Install Oil Suction Screen

Remove Charge Pump

Disassemble Charge Pump

Assemble Charge Pump

Install Charge Pump

Group 0399: Dealer Fabricated Tools

DFT1103 Spacer

DFT1121 Rivet Forming Tool

JT38000 Differential Lifting Tool

Section 04: Engine

Group 0400: Removal And Installation

4039 John Deere Engine—Use CTM8

Special Or Essential Tools

Specifications

Remove Engine

Remove Reverser And Torque Converter

Install Torque Converter And Reverser

Install Engine

Section 05: Engine Auxiliary Systems

Group 0505: Cold Weather Starting Aids

Specifications

Remove And Install Engine Coolant Heater

Remove And Install Starting Aid Nozzle

Remove And Install Starting Aid Solenoid

Group 0510: Cooling Systems

Other Material

Service Equipment And Tools

Remove And Install Fan

Remove And Install Fan Belts

Fan Belt Tension Adjustment

Remove And Install Radiator And Oil Cooler

Group 0515: Speed Controls

Disassemble And Assemble Speed Control Linkage

Group 0520: Intake System

Special Or Essential Tools

Remove And Install Air Cleaner

Disassemble And Assemble Air Cleaner

Test Air Intake System

Group 0560: External Fuel Supply System

Other Material

Remove And Install Fuel Tank

Section 06: Torque Converter

Group 0651: Turbine, Gears And Shaft

Service Equipment And Tools

Other Material

Remove And Install Torque Converter

Air Test Torque Converter

Section 09: Steering System

Group 0960: Hydraulic System

Service Equipment And Tools

Other Material

Specifications

Remove And Install Steering Pump (SN —802199)

Disassemble, Inspect And Assemble Steering Pump (SN —802199)

Remove And Install Steering Column

Repair Tilt Steering Column

Remove And Install Steering Valve

Disassemble Steering Valve

Cross Section Of Steering Valve

Assemble Steering Valve

Remove And Install Non-Powered Axle Steering Cylinder

Disassemble Non-Powered Axle Steering Cylinder

Cross Section Of Non-Powered Axle Steering Cylinder

Assemble Non-Powered Axle Steering Cylinder

Remove And Install Steering Cylinder Bushings

Cross Section Of APL735 MFWD Axle Steering Cylinder

Disassemble And Assemble APL735 MFWD Axle Steering Cylinder

Cross Section Of APL2025 MFWD Axle Steering Cylinder

Disassemble And Assemble APL2025 MFWD Axle Steering Cylinder

Adjust Tracking Angle For MFWD Axle

Section 10: Service Brakes

Group 1011: Active Elements

Special Or Essential Tools

Other Material

Specifications

Remove And Inspect Brake Disk And Pressure Plate (SN —796851)

Install Brake Pressure Plate And Brake Disk (Serial No. —796851)

Install Stop Screws And Pressure Test Brake Piston (SN —796851)

Remove And Inspect Brake Disk And Pressure Plate (SN 796852— )

Install Brake Pressure Plate And Brake Disk (SN 796852— )

Pressure Test Brake Piston (SN 796852— )

Reclaim Transaxle Case Braking Surface

Polish Transaxle Case Braking Surface

Transaxle Case Clean-Up Procedure

Group 1060: Hydraulic System

Special Or Essential Tools

Service Equipment And Tools

Other Material

Specifications

Remove And Install Brake Valve

Disassemble And Assemble Brake Valve

Adjust Brake Pedals

Bleed Brakes

Adjust Service Brakes (SN —796851)

Group 1099: Dealer Fabricated Tools

DFT1122 Transaxle Turning Tool

Section 11: Park Brake

Group 1111: Active Elements

Other Material

Park Brake Cross Section

Remove Park Brake Active Elements

Install Park Brake Active Element

Adjust Park Brake

Group 1160: Hydraulic System

Remove And Install Park Brake Actuator

Disassemble And Assemble Brake Actuator And Controls (SN —802199)

Disassemble And Assemble Park Brake Controls (SN 801200— )

Section 16: Electrical Systems

Group 1671: Batteries, Support And Cables

Specifications

Battery Safety

Check Battery Electrolyte Level And Terminals

Procedure For Testing Batteries

Remove And Install Battery

Group 1672: Alternator, Regulator And Charging System Wiring

John Deere Engine Accessories—Use CTM11

Service Equipment And Tools

Specifications

Remove And Install Alternator

Adjust Alternator Belt Tension

Group 1673: Lighting System

Remove And Install Drive And Work Light

Remove And Install Halogen Bulb

Remove And Install Front Console

Remove And Install Side Console Panel Bulbs

Remove And Install Display Module Bulbs

Remove And Install Turn, Brake And Tail Light Bulbs

Remove And Install Front Turn Light Bulb

Remove And Install Dome Light And Swivel Light

Group 1674: Wiring Harness And Switches

Special Or Essential Tools

Other Material

Replace DEUTSCH DEUTSCH is a trademark of the DEUTSCH CO. Connectors

InstallDEUTSCH DEUTSCH is a trademark of Deutsch Co. Contact

Replace WEATHER PACK WEATHER PACK is a trademark of PACKARD ELECTRIC Connector

Replace SURE-SEAL SURE-SEAL is a trademark of Cannon. Connector With Weather Pack Connector

InstallWEATHER PACK WEATHER PACK is a trademark of Packard Electric Contact

Remove Connector Body From Blade Terminals

Remove And Install Fuses

Remove And Install Loader Lever Switch

Remove And Install Gear Shift Lever Switch

Remove And Install FNR Switch

Remove And Install Brake Light Switch

Remove And Install Reverser Pressure Switch (SN —778668)

Remove And Install Forward/Reverse Solenoid

Remove And Install Clutch Disconnect Solenoid

Remove And Install Reverse Alarm Switch (Early Machines)

Remove And Install MFWD Solenoid

Adjust MFWD Solenoid

Remove And Install MFWD Indicator Switch

Remove And Install Park Brake Sensing Switch

Group 1675: System Controls

Remove And Install Logic Module

Remove And Install Return-To-Dig Switch

Group 1676: Instruments And Indicators

Other Material

Specifications

Remove And Install Engine Coolant Temperature Switch

Remove And Install Engine Oil Pressure Switch

Remove And Install Air Filter Restriction Switch

Remove And Install Reverser Temperature Switch (SN —796854)

Remove And Install Hydraulic Filter Restriction Switch (SN —796854)

Remove And Install Tachometer/Hour Meter

Remove And Install Fuel Gauge

Remove And Install Fuel Gauge Sender

Group 1677: Motors And Actuators

Starter Motor Repair—Use CTM77

Remove And Install Starting Motor

Remove And Install Starter Relay

Section 17: Frames, Chassis Or Supporting Structure

Group 1740: Frame Installation

Special Or Essential Tools

Specifications

Welding Repair Of Major Structures

Remove And Install RIVNUT RIVNUT is a registered trademark of The BF Goodrich Co. (KREMNUT) Fasteners

Group 1749: Chassis Weights

Specifications

Remove And Install Counterweight

Remove And Install Frame Bumper — 300D,310D

Section 18: Operator’s Station

Group 1800: Removal And Installation

Service Equipment And Tools

Specifications

Remove And Install Cab Or ROPS

Group 1810: Operator Enclosure

Other Material

Specifications

Disassemble And Assemble Fixed Right Front Cab Window And Wiper Motor

Disassemble And Assemble Right Cab Door And Wiper Motor

Disassemble And Assemble Left Cab Door And Wiper Motor

Adjust Cab Right Door Latch And Hinges

Adjust Cab Left Door Latch And Hinges

Adjust Cab Door Handle Screw

Disassemble And Assemble Cab Side Windows

Adjust Cab Side Windows

Disassemble And Assemble Upper Rear Window And Wiper Motor

Adjust Upper Rear Window

Disassemble And Assemble Lower Rear Windows

Adjust Lower Rear Window

Remove And Install Windowpanes

Remove and Install Headliner (S.N. —823355)

Remove and Install Headliner (S.N. 823356— )

Group 1821: Seat And Seat Belt

Specifications

Remove And Install Seat Assembly

Disassemble And Assemble Non-Suspension Seat

Disassemble And Assemble Seat Base—Non-Suspended

Disassemble And Assemble Suspension Seat

Disassemble And Assemble Suspended Seat Adjuster

Disassemble And Assemble Seat Suspension

Group 1830: Heating And Air Conditioning

Special Or Essential Tools

Service Equipment And Tools

Other Material

Specifications

Remove And Install Heater Core

Remove And Install Heater Control Valve

Remove And Install Heater Temperature Control Cable

Remove And Install Heater/Blower Motor (SN —802199)

Remove And Install Heater/Blower Motor (SN 802200— )

Disassemble And Assemble Heater/Blower Motor (SN —802199)

Disassemble And Assemble Heater/Blower Motor (SN 802200— )

Disassemble And Assemble Air Ducts (SN —802199)

Disassemble And Assemble Air Ducts (SN 802200— )

Proper Refrigerant Handling

R12 And R134A Refrigerant Cautions

Refrigerant Hoses And Tubing Inspection

Leak Testing

Check And Adjust Compressor Belt Tension

Remove And Install Condenser

Remove And Install Receiver/Dryer

Remove And Install Evaporator

Remove And Install Expansion Valve

Remove And Install Clutch Cycle Switch

Remove And Install High And Low Pressure Switches

Remove And Install Compressor

R134A Component Oil Charge

Disassemble And Assemble Compressor Clutch—R134A

Check Clutch Hub Clearance—R134A

Inspect Compressor Manifold—R134A

Disassemble, Inspect And Assemble Compressor—R134A

Remove And Install Compressor Relief Valve—R134A

R12 Component Oil Charge

Volumetric Efficiency Test—R12 Only

Disassemble And Inspect Compressor—R12

Clutch Pulley, Bearing And Hub Inspection—R12

Replace Clutch Pulley Bearing—R12

Replace Shaft Seal Seat—R12

Assemble Compressor—R12

Check Clutch Hub Clearance—R12

Remove And Install Compressor Relief Valve—R12

Group 1899: Dealer Fabricated Tools

DFRW-20 Compressor Holding Fixture

DFT1101 Cab And ROPS Lift Bracket

Section 19: Sheet Metal And Styling

Group 1910: Hood And Engine Enclosure

Disassemble And Assemble Hood And Engine Enclosure

Group 1913: Miscellaneous Shields

Specifications

Disassemble And Assemble Steps

Disassemble And Assemble Battery Box

Disassemble And Assemble MFWD Shaft Guard (SN —802199)

Disassemble And Assemble MFWD Shaft Guard (SN 802200— )

Group 1921: Grille And Grille Housing

Disassemble And Assemble Grille And Grille Housing

Group 1927: Fenders

Disassemble And Assemble Fenders

Section 20: Safety, Convenience And Miscellaneous

Group 2001: Radio

Other Material

Remove And Install Radio And Speakers

Remove And Install Antenna

Group 2004: Horn And Warning Devices

Other Material

Remove And Install Horn

Remove And Install Reverse Alarm Switch (SN —802199)

Remove And Install Reverse Warning Alarm

Adjust Reverse Alarm Volume

Section 21: Main Hydraulic System

Group 2160: Hydraulic System

Other Material

Specifications

Remove And Install Main Hydraulic Pump

Disassemble And Inspect Hydraulic Pump (SN —802199)

Assemble Hydraulic Pump (SN —802199)

Disassemble And Inspect Main Hydraulic Pump (SN 802200— )

Assemble Main Hydraulic Pump (SN 802200— )

Remove And Install Auxiliary Pump (SN 802200— )

Disassemble And Inspect Auxiliary Pump (SN 802200— )

Assemble Auxiliary Pump (SN 802200— )

Remove And Install Pump Drive Shaft Assembly

Remove And Install Priority Valve (SN —802199)

Disassemble And Assemble Priority Valve (SN —802199)

Remove And Install Hydraulic Filter

Remove And Install Hydraulic Reservoir (SN —802199)

Hydraulic Reservoir

Remove And Install Hydraulic Reservoir (SN 802200— )

Remove And Install Suction Screen

Remove And Install Oil Cooler (SN —802199)

Remove And Install Hydraulic Oil Cooler (SN 802200— )

Remove And Install System Relief Valve (SN —802199)

Disassemble And Assemble System Relief Valve (SN —802199)

Remove And Install System Relief Valve (SN 802200— )

Disassemble And Assemble System Relief Valve (SN 802200— )

Section 31: Loader

Group 3100: Remove And Install

Remove Loader

Install Loader

Group 3102: Bucket

Remove And Install Loader Bucket

Remove And Install Cutting Edge

Group 3115: Controls Linkage

Specifications

Loader Bucket Level Indicator And Return-To-Dig Switch Adjustment

Loader Control Valve Linkage Adjustment

Group 3140: Frames

Service Equipment And Tools

Remove And Install Bucket Cylinder Linkage

Group 3160: Hydraulic System

Special Or Essential Tools

Other Material

Specifications

Remove And Install Loader Control Valve (SN —802199)

Disassemble And Assemble Loader Control Valve (SN —802199)

Disassemble And Assemble Bucket Head End Relief Valve (SN —802199)

Disassemble And Assemble Bucket Rod End Relief Valve (SN —802199)

Disassemble And Assemble Bucket Section (SN —802199)

Disassemble And Assemble Lift Check Plug (SN —802199)

Disassemble And Assemble Anti-Cavitation Check Valve (SN —802199)

Disassemble And Assemble Boom Section (SN —802199)

Disassemble And Assemble End Plate And Cover (SN —802199)

Remove And Install Loader Control Valve (SN 802200— )

Disassemble And Assemble Loader Control Valve (SN 802200— )

Replace Wiper Rings And Seals Of Loader Control Valve Sections (SN 802200— )

Remove And Install Loader Control Valve Relief Valves (SN 802200— )

Cross Section Of System Relief Valve (SN 802200— )

Cross Section Of Bucket Curl And Boom Raise Circuit Relief Valve (SN 802200— )

Cross Section Of Auxiliary And Bucket Dump Relief Valve With Anti-Cavitation (SN 802200— )

Cross Section Of Boom Anti-Cavitation Valve (SN 802200— )

Disassemble And Assemble Priority Section (SN 802200— )

Disassemble And Assemble Bucket Section (SN 802200— )

Disassemble And Assemble Boom Section (SN 802200— )

Disassemble And Assemble Auxiliary Section (SN 802200— )

Remove And Install Loader Boom Cylinder

Remove And Install Loader Bucket Cylinder

Disassemble Bucket And Boom Cylinders

Cross Section Of Bucket And Boom Cylinder

Assemble Bucket And Boom Cylinder

Group 3199: Dealer Fabricated Tools

DF1033 Electromagnet Jig

Section 33: Backhoe

Group 3300: Removal And Installation

Remove And Install Backhoe—315D

Group 3302: Bucket

Service Equipment And Tools

Remove And Install Bucket And Bucket Links

Remove And Install Bucket Bushings

Remove And Install Bucket Tooth Shank

Remove And Install Bucket Cutting Edge

Group 3315: Control Linkage

Remove And Install Backhoe Control Valve Linkage

Backhoe Valve Linkage Adjustment

Stabilizer Valve Linkage Adjustment

Adjust Boom Lock Linkage

Group 3340: Frames

Service Equipment And Tools

Other Material

Specifications

Remove And Install Dipperstick

Remove And Install Boom

Remove And Install Swing Frame

Remove Extendible Dipperstick (SN —787833)

Install Extendible Dipperstick (SN —787833)

Remove Extendible Dipperstick Extension (SN —787833)

Remove And Install Extendible Dipperstick Extension Bearing Strips (SN —787833)

Install Extendible Dipperstick Extension (SN —787833)

Remove And Install Extendible Dipperstick Collar (SN —787833)

Adjust Extendible Dipperstick Collar (SN —787833)

Remove Extendible Dipperstick (SN 787834— )

Install Extendible Dipperstick (SN 787834— )

Replace Extension Support Pads (SN 787834— )

Remove Extendible Dipperstick Extension (SN 787834— )

Remove And Install Extendible Dipperstick Bearing Strips (SN 787834— )

Install Extendible Dipperstick Extension (SN 787834— )

Remove And Install Side Shift Frame—315D

Group 3360: Hydraulic System

Special Or Essential Tools

Other Material

Specifications

Remove And Install Backhoe Control Valve

Disassemble And Assemble Backhoe Control Valve—300D (SN —802199)

Disassemble And Assemble Circuit Relief Valve With Anti-Cavitation—300D (SN —802199)

Disassemble And Assemble Circuit Relief Valve—300D (SN —802199)

Disassemble And Assemble Swing, Boom, Bucket And Crowd Sections—300D (SN —802199)

Cross Section Of Boom Section—300D (SN —802199)

Cross Section Of Bucket Section—300D (SN —802199)

Cross Section Of Crowd Section—300D (SN —802199)

Disassemble And Assemble Backhoe Control Valve—300D (SN 802200— ), 310D, 315D

Remove And Install Backhoe Valve Relief Valves—300D (SN 802200— ), 310D, 315D

Disassemble And Assemble Circuit Relief Valve With Anti-Cavitation—300D (SN 802200— ), 310D, 315D

Disassemble And Assemble Circuit Relief Valve—300D (SN 802200— ), 310D, 315D

Disassemble And Assemble Auxiliary Valve Section—300D (SN 802200— ), 310D, 315D

Disassemble And Assemble Boom, Crowd And Bucket Valve Section—300D (SN 802200— ), 310D, 315D

Disassemble And Assemble Swing Valve Section—300D (SN 802200— ), 310D, 315D

Replace Wiper Rings And Seals Of Control Valve Sections—300D (SN 802200— ), 310D, 315D

Disassemble And Assemble Outlet Valve Section—300D (SN 802200— ), 310D, 315D

Remove And Install Stabilizer Valve

Disassemble And Assemble Stabilizer Valve

Remove And Install Bucket Cylinder

Remove And Install Crowd Cylinder

Remove And Install Boom Cylinder

Remove And Install Swing Cylinder

Remove And Install Stabilizer Cylinder—300D, 310D

Remove And Install Stabilizer Cylinder—315D

Disassemble Bucket, Crowd, Boom, Swing And Stabilizer Cylinder

Cross Section Of Bucket Cylinder

Cross Section Of Crowd Cylinder—300D

Cross Section Of Crowd Cylinder—310D, 315D

Cross Section Of Boom Cylinder—300D

Cross Section Of Boom Cylinder—310D, 315D

Cross Section Of Stabilizer Cylinder—300D, 310D

Cross Section Of Stabilizer Cylinder—315D

Cross Section Of Swing Cylinder—300D, 310D

Cross Section Of Swing Cylinder—315D

Assemble Bucket, Crowd, Boom, Swing And Stabilizer Cylinder

Remove And Install Extendible Dipperstick Extension Cylinder (SN —787833)

Disassemble And Assemble Extendible Dipperstick Extension Cylinder (SN —787833)

Remove Extendible Dipperstick Extension Cylinder (SN 787834— )

Install Extendible Dipperstick Extension Cylinder (SN 787834— )

Disassemble Extendible Dipperstick Extension Cylinder (SN 787834— )

Assemble Extendible Dipperstick Extension Cylinder (SN 787834— )

Remove And Install Side Shift Locking Valve—315D

Remove, Repair And Install Side Shift Locking Pistons And Bushings—315D

Table of Contents - John Deere Backhoe Loaders 300D 310D 315D
Foreword
   General Information
      Safety Information
      General Specifications
      Torque Values
      Fuels And Lubricants
   Wheels
      Powered Wheels And Fastenings
      Non-Powered Wheels And Fastenings
   Axles And Suspension Systems
      Input Drive Shafts And U-Joints
      Non-Powered Wheel Axles
      Powered Wheel Axle (MFWD)
      Axle Shaft, Bearings, And Reduction Gears
      Dealer Fabricated Tools
   Transmission
      Removal And Installation
      Controls Linkage
      Input Drive Shafts And U-Joints
      Gears, Shafts, Bearings, And Power Shift Clutch
      Hydraulic System
      Dealer Fabricated Tools
   Engine
      Removal And Installation
   Engine Auxiliary Systems
      Cold Weather Starting Aids
      Cooling Systems
      Speed Controls
      Intake System
      External Fuel Supply System
   Torque Converter
      Turbine, Gears And Shaft
   Steering System
      Hydraulic System
   Service Brakes
      Active Elements
      Hydraulic System
      Dealer Fabricated Tools
   Park Brake
      Active Elements
      Hydraulic System
   Electrical Systems
      Batteries, Support And Cables
      Alternator, Regulator And Charging System Wiring
      Lighting System
      Wiring Harness And Switches
      System Controls
      Instruments And Indicators
      Motors And Actuators
   Frames, Chassis Or Supporting Structure
      Frame Installation
      Chassis Weights
   Operator’s Station
      Removal And Installation
      Operator Enclosure
      Seat And Seat Belt
      Heating And Air Conditioning
      Dealer Fabricated Tools
   Sheet Metal And Styling
      Hood And Engine Enclosure
      Miscellaneous Shields
      Grille And Grille Housing
      Fenders
   Safety, Convenience And Miscellaneous
      Radio
      Horn And Warning Devices
   Main Hydraulic System
      Hydraulic System
   Loader
      Remove And Install
      Bucket
      Controls Linkage
      Frames
      Hydraulic System
      Dealer Fabricated Tools
   Backhoe
      Removal And Installation
      Bucket
      Control Linkage
      Frames
      Hydraulic System
      Social networks

John Deere 300D, 310D, 315D Backhoe Loaders Repair Service Manual (TM1497)